Horváth Péter

Condition: used, mileage: 180,900 km, power: 300 kW (407.89 HP), first registration: 09/2008, fuel type: diesel, empty load weight: 11,760 kg, maximum load weight: 29,240 kg, overall weight: 41,000 kg, axle configuration: 8x6, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, loading space volume: 20 m³, Equipment: ABS, air conditioning, all wheel drive, cruise control, differential lock, onboard computer,

Condition: used, mileage: 94,800 km, power: 132 kW (179.47 HP), first registration: 11/2009, fuel type: diesel, empty load weight: 4,760 kg, maximum load weight: 2,730 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,300 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, loading space volume: 39 m³, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, soot filter,

Condition: used, mileage: 103,200 km, power: 460 kW (625.43 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 10,696 kg, maximum load weight: 15,304 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,400 mm, fuel: diesel, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, Mercedes-Benz Actros 2663 LS 6x4 semi-trailer tractor unit First registered: 6/2020 103,200 km 630 hp engine with 15,569 cc displacement GigaSpace cab with 2 beds Automatic transmission Retarder Hnsdpezuz Ddjfx Ah Esr Air conditioning, auxiliary heater Adaptive cruise control Lane keeping assist Mirror Cam Full spoiler Drivetrain capacity: 68,000 kg Weight variant: 28,000 kg 6x4 axle configuration Air suspension front and rear Wheelbase: 3400 mm Tires 385/65 R22.5, tread depth 80% Tires 315/70 R22.5, tread depth 70% Unladen weight: 10,696 kg The vehicle is from a single owner and is in good condition. Valid TÜV (technical inspection) until August 2027. Export/net price: 85,900 euros All information without guarantee, errors and omissions excepted.

Year of construction: 2013, condition: used, - Press table: 3000 x 1400 mm Hnedpjzuz A Tefx Ah Ejr Membrane press Manufacturer: Columbus Type: Multimat Year of manufacture: 2013 Technical data - Press table: 3000 x 1400 mm Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2020, LANG Technik Macro-Grip / Quick-Point Clamping System Package Hjdozuz A Hjpfx Ah Esnr 2 units available 1x LANG Macro-Grip 125 Vise, Type 47205 1x LANG Quick-Point 96 Single Plate, Type 45400 1x LANG Quick-Point 96 Grid Plate, Type 45763 1x LANG Quick-Point 96 Sub-base 100 mm, Type 44100 High-quality clamping technology package from LANG Technik for professional use on CNC machining centers. The system is ideally suited for 5-axis machining and, thanks to the modular Quick-Point zero-point clamping system, enables short setup times and high repeatability. Advantages: Precise and reproducible workpiece clamping Optimal accessibility in 5-axis machining Fast retooling thanks to Quick-Point zero-point technology Robust industrial design Compatible with other LANG components Condition: Used, fully functional. Normal signs of wear from ongoing production. Inspection possible by appointment. Shipping or pickup by arrangement.

Condition: used, mileage: 1,029,296 km, power: 324 kW (440.52 HP), first registration: 10/2015, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, suspension: steel, Year of construction: 2015, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, spoiler, = Additional options and accessories = - Roof spoiler - Speed limiter - Headlights Hjdpfezuz Ayjx Ah Eenr - Stability control - Alternating current - Toolbox = Additional information = Brakes: Disc brakes Suspension: Leaf suspension Front axle: Tire size: 315/80 R22.5; Steered; Tire tread left: 5 mm; Tire tread right: 10 mm Rear axle 1: Tire size: 235/75 R17.5; Lift axle; Tire tread left: 7 mm; Tire tread right: 8 mm Rear axle 2: Tire size: 315/80 R22.5; Twin tires; Tire tread left inner: 7 mm; Tire tread left outer: 6 mm; Tire tread right inner: 1 mm; Tire tread right outer: 1 mm Empty weight: 7,875 kg Payload: 16,025 kg Gross vehicle weight (GVW): 23,900 kg Damage: Damaged vehicle (not roadworthy)

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Hjdpfx Ahszuzzis Eenr

Condition: used, Year of construction: 1988, A Heckert horizontal CNC machining center in need of repair is offered. Travel X/Y/Z: 800mm/560mm/805mm, tool taper: SK50, pallet size: 500mm/500mm, number of pallets: 2, max. pallet load: 800kg, tool magazine: 40, max. spindle speed: 4200rpm, control: Siemens Sinumerik, rapid traverse X/Y/Z: 24m/min, B-axis: 360°. Machine dimensions: approx. 6510mm/5115mm/2933mm, weight: approx. 16000kg. The machine could not be powered up again after a power outage. Inspection possible by arrangement. Hodpezuzy Sefx Ah Ejnr

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Hsdozuzy Espfx Ah Ejnr

Year of construction: 2003, condition: used, Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible. Hodpjzuzyxofx Ah Eonr

Condition: used, Year of construction: 1999, Two Juki button sewing machines and one Herbert Meyer fusing machine are available. 1) 2x Juki MB-373 button sewing machines, stitch type: single-thread chainstitch, max. sewing speed: 1500stitches/min, number of stitches: 8/16/32, crosswise feed: 2.5mm-6.5mm, lengthwise feed: 0mm/2.5mm-6.5mm, button size range: 10mm-28mm, needle bar stroke: 48.6mm. 2) Herbert Meyer RPS-L 600 fusing machine, year of manufacture: 1999, fusing width: 600mm, max. belt speed range: 9m/min, max. pressing pressure: 3.5bar. Oil level and needles should be checked. On-site inspection is possible. Hnjdpfx Aozuzzcjh Eor

Condition: used, An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement. Hnsdpozuzzpjfx Ah Eer

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Hodpfx Ahozuzzvs Eenr

Condition: used, Year of construction: 1998, A Klöckner DESMA rubber injection molding machine with increased clamping pressure is offered. Material processing: rubber, clamping force: 4500kN, min./max. mold height: 180mm/530mm, adjustable opening stroke: 570mm, clear distance between tie bars X/Y: 600mm/810mm, max. clamping area X/Y: 670mm/940mm, heating platen size X/Y: 670mm/940mm, injection: from above, max. injection volume: 3300cm³, injection force: 1886kN, max. injection pressure: 2150bar, screw diameter: 55mm, injection plunger diameter: 105mm, operating pressure: 250bar, number of control zones: 12, heating capacity per control zone: 21kW, ejector: hydraulic top and bottom, ejector slot spacing: 730mm. The machine is currently not operational because the control cabinet of the DRC 2000 (Simatic S7) is already being used elsewhere and is not part of the machine. Documentation available. Inspection possible by arrangement. Hsdpfxjzuz Ago Ah Esnr

Condition: used, Year of construction: 2006, X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible. Hedpfxezuz Aaj Ah Eonr

Year of construction: 2007, condition: used, An ARISTO flatbed cutting and routing system with MultiHead IV, HF Routing Device, color camera and ARISTOprojection is offered. Cutting width: 2300mm, static repeatability: +/-0.08mm, max. material clearance thickness: 55mm, drive system: digital AC servo motors, data format: HPGL compatible, interface: RS232C/V.24, transmission speed: 38400baud, vacuum system: adjustable matrix vacuum zones. 2) MultiHead IV type 4021/OT.M.P. IV-1, electrically oscillating tool axis, max. pressure: 180N at 6bar, integrated laser pointer, color camera with AutomaticEye registration system, tool head dimensions W/H/D: 166mm/390mm/330mm, weight: approx. 8.5kg. 3) HF Routing Device for spindles 4040 DC/4040 DC-S, max. speed: 50000rpm/60000rpm, power: max. 800W/1000W, Z-axis stroke: 50mm, collet range: 1.5mm-6.35mm. 4) ARISTOprojection for 1:1 projection of the contours onto the working area. Machine was regularly maintained. Documentation available. Inspection possible by arrangement. Hodezuzz Nspfx Ah Eenr

Condition: used, Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible. Hnodpjzuz Amsfx Ah Eer

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Hnjdpfxjzuzz As Ah Ejr

Condition: reconditioned (used), Year of construction: 2006, year of last overhaul: 2026, Studer S30-1 CE High-precision cylindrical grinding machine for external and internal grinding. - Distance between centers: 650 mm - Height between centers: 175 mm - Currently undergoing a rebuild (retrofit) process to offer performance and precision comparable to that of a new machine. - Equipped with a digital measuring system. - Equipped with refurbished components and adjusted to ensure maximum reliability and precision. - Wide range of accessories available. Hnodpfx Ahjzuzylj Esr - A working demonstration and test can be performed at any time. - Delivery time: upon request (in the final stages of the rebuild) - The photographs show a reference machine of the same model, refurbished by us. Project reference: OP26-006

Condition: used, Year of construction: 2003, Year: 2003 Condition: very good Configuration: - Number of knives: 4 Hnsdpfszuzx Uex Ah Esr - Extended side air tables: 750 × 750 mm

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 30-009, warranty duration: 6 months, total width: 660 mm, total length: 2,215 mm, total height: 1,620 mm, type of input current: three-phase, overall weight: 360 kg, year of last overhaul: 2025, GULLIVER IRIS 20 Dough Divider The Iris dough divider is designed for dividing both soft and hard dough. This machine is suitable for any bakery, providing precise and consistent portioning. The machine is equipped with an interchangeable blade system (from 1 to 6), allowing the weight and shape of the portions to be adjusted to suit specific products. The control panel with a computer allows for the operation of up to 30 programs. Portion weight range (depending on the number of blades): from 30 g to 1200 g Standard equipment: 1–3 stainless steel cutting blades Hedpfx Ahszuzx Is Ejnr flour dispenser restart system Optional equipment: 4–6 cutting blades, special blades

Condition: used, mileage: 274,885 km, power: 95 kW (129.16 HP), fuel type: diesel, gearing type: mechanical, first registration: 11/2010, emission class: euro5, color: other, number of seats: 23, Year of construction: 2010, Equipment: ABS, Height: 280 cm Damage: None Hodpfx Aezuzxzjh Esnr = Company Information = We are an international company based in Belgium, in the vicinity of Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as an exhibition space. We always have a large number of buses of all makes, capacities, and models in stock, covering every price range. We can find the right tourist, school, or city bus for you, tailored to your needs or budget. All information is subject to change without notice. Errors, prior sales, and typographical errors excepted. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: good (used), mileage: 593,304 km, power: 274 kW (372.54 HP), first registration: 09/1992, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 1992, Equipment: ABS, electric window regulation, = Additional options and accessories = - 1 fuel tank - Armrest - Central lubrication - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - PTO - Rear suspension: Leaf - Thick Axles = More information = Cab: single Hjdpfx Ahezuzxue Ejnr Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Technical condition: good Visual appearance: good

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Hnedpjzuzxnsfx Ah Eer Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Positioning of the pressure jaws: Hsdpfxjzuzxbe Ah Ejnr - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.