A.M. Hommeles BV

Condition: excellent (used), Year of construction: 2018, Tapflo PT50 peristaltic pump 2018, high pressure hose pump, 4Kw motor, 3Ph Fsdpe Ai Eazjfx Actjpp

Condition: good (used), DOPAG Pump 200 – Grease Pump / Central Lubrication Pump - Year of manufacture: 2003 - Type: Pump 200 - Manufacturer: DOPAG - Overall dimensions: - Width: 600 mm - Length: 700 mm - Height: 1,600 mm - Max. operating pressure: 6 bar - Serial number: 2003119175/B-0 Fpode Ai A Sqspfx Actjp - Pneumatic grease drum pump for 200-liter drums. - Suitable for use as a central lubrication pump.

Condition: used, Hydraulic power unit Fpjdpfx Acs Aicdbjtep 7.5 + 5 kW

Condition: used, Hydraulic unit, 37 kW Cooler, 0.37 kW pmax 420 bar Pump type BPV 100-SG-EH-L Flow rate 0 - 145 l/min Fedpfx Acs Aicc Totepp

Condition: used, functionality: fully functional, For sale: a used submersible pump with a capacity of 160 m³/h, powered by a 7.5 kW motor and operating on 380 V. Fpedpfxe Aibrio Actop The pump has been inspected and is in full working order. Condition/defect: a crack in the outer part of the housing casting. The pump has been fully tested and confirmed to be working; this defect does not affect its operation.

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Fodpfx Aco Aibrfotopp Rated voltage: 380/220 V Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Power factor cos φ: 0.89 Insulation class: F Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: excellent (used), functionality: fully functional, For sale: an industrial KSB ETABLOC-MN 32-200/752 centrifugal pump with a 7.5 kW electric motor. It features a monobloc design with an axial suction nozzle and a vertical discharge nozzle, both equipped with flanged connections. The rated capacity is 18 m³/h, or 18,000 liters per hour, at a head of 62 m, as indicated on the pump nameplate. Pump data: Manufacturer: KSB Model: ETABLOC-MN 32-200/752 Rated capacity Q: 18 m³/h – 18,000 l/h Head H: 62 m Rotational speed according to the pump nameplate: 2940 rpm Year of manufacture: 1992 Nameplate number: 4-925-177653/1 Fjdpfx Ae Aibrboctepp Motor data: Power: 7.5 kW Rated voltage: 500 V, delta (Δ) connection Rated current: 11.8 A Frequency: 50 Hz Rotational speed: 2910 rpm Protection class: IP54 Insulation class: F Power factor cos φ: 0.84

Condition: excellent (used), functionality: fully functional, For sale: Hidrostal D0DQ-S01 industrial submersible pump with a 4 kW three-phase motor, control box, float switch, and power cable. Robust construction with a ring-shaped base and a lateral discharge nozzle equipped with an elbow and quick-release coupling. Technical specifications: Fpodpfj Aibq Tox Actsp Motor power: 4 kW Power supply: 380–420 V, three-phase Frequency: 50 Hz Maximum flow rate: 48 l/s, or 172.8 m³/h Maximum head: 13.5 m Performance and head parameters are provided according to the attached specification for model D0DQ-S01. Maximum values do not occur simultaneously; actual flow rate depends on the discharge head and installation resistance. Included: pump with base, control box with buttons, float switch, power cable with power plug, discharge elbow with quick-release coupling. Condition: used, with visible signs of wear, paint scratches, and localized corrosion. The scope of equipment and visual condition are shown in the photos.

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m Fpjdo Aibq Njpfx Actsp • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: new, functionality: unexamined, Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens INDUSTRIAL PUMP GRUNDFOS CR15-5 5.5 kW – VERTICAL MULTISTAGE 400V SIEMENS IE4 The GRUNDFOS CR15-5 K-F-A-E-HQQE is a professional, vertical multistage centrifugal pump designed for industrial installations, pressure boosting systems, water supply systems, and technological systems. Equipped with an energy-efficient Siemens / Innomotics IE4 motor with a power of 5.5 kW, it provides high performance and efficient operation in demanding water installations. Original Grundfos pump – catalog number 93138502, manufactured in Denmark. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Manufacturer code: CR15-5 K-F-A-E-HQQE KEY ADVANTAGES Flow rate: 17 m³/h (17,000 l/h) – suitable for industrial and water installations. Maximum head: 74.6 m – for systems requiring high pressure. Power: 5.5 kW, power supply: 400V – three-phase Siemens IE4 motor. Maximum pressure: 16 bar – robust industrial design. Vertical multistage pump – compact design. Hydraulic components made of stainless steel – durability and corrosion resistance. Mechanical seal: HQQE – professional Grundfos solution. Protection class: IP55 – motor adapted for industrial operation. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Brand: Grundfos TECHNICAL DATA GRUNDFOS CR15-5 Manufacturer: Grundfos Model: CR15-5 K-F-A-E-HQQE Product number: 93138502 Type: centrifugal pump, vertical, multistage Motor power: 5.5 kW / 5500 W Flow rate (from nameplate): 17.0 m³/h Head H: 61.8 m Maximum head Hmax: 74.6 m Maximum pressure: 16 bar Maximum liquid temperature: 120°C Pump speed: 2919 rpm Frequency: 50 Hz Seal: HQQE Country of manufacture: Denmark Fpode Aibhcjpfx Actop Operating mode: S1 – continuous Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Type: other APPLICATION OF THE INDUSTRIAL PUMP The Grundfos CR15-5 pressure pump can be used in: booster sets and pressure boosting systems, water supply and industrial installations, water treatment and filtration systems, cooling installations and technological circuits, industrial washing systems, HVAC installations and circulation systems, production lines and process installations. Pump selection requires consideration of the hydraulic characteristics of the installation and the type of fluid.

Condition: new, Year of construction: 2019, functionality: unexamined, WILO EMU FA 10.62E SUBMERSIBLE SEWAGE PUMP – 5 kW 400 V ATEX WILO EMU FA 10.62E – PROFESSIONAL SEWAGE PUMP FOR PUMP STATIONS AND SEWERAGE SYSTEMS For sale is an original WILO EMU FA 10.62E submersible sewage pump with an FK17.1-4/12KEx motor, 5 kW power, and 400 V three-phase power supply. This is an industrial sewage pump designed for the transport of municipal and industrial wastewater, as well as contaminated liquids, in appropriately designed installations. The pump from the German manufacturer WILO belongs to the professional EMU FA series, used in water and sewage installations, sewage pumping stations, and wastewater treatment plants. Key parameters: • Manufacturer: WILO – Made in Germany • Model: EMU FA 10.62E • Motor power: 5 kW / 5000 W • Supply voltage: 400 V, three-phase • Nominal flow rate: 115.6 m³/h – 115,600 l/h • Nominal head: 9.1 m • Year of manufacture: 2019 • Protection class: IP68 • Motor design: Ex / ATEX POWERFUL SUBMERSIBLE SEWAGE PUMP – KEY FEATURES HIGH EFFICIENCY – 115,600 L/H The pump’s nominal flow rate is 115.6 m³/h. The unit is designed for transporting large volumes of wastewater in professional pumping systems. 5 KW / 400 V INDUSTRIAL MOTOR Three-phase WILO FK17.1-4/12KEx motor with a rated power of 5 kW, designed for operation in industrial installations. IP68 SUBMERSIBLE PUMP Design intended for submerged operation. The maximum immersion depth according to the nameplate is 20 m. EX / ATEX EXPLOSION-PROOF DESIGN The pump is equipped with a motor with a factory Ex marking. Use in explosion-hazard areas requires the specific installation to comply with the manufacturer’s documentation and applicable requirements. ROBUST HYDRAULICS FOR WASTEWATER Centrifugal pump with hydraulics designed for transporting wastewater and liquids containing contaminants. According to the FA 10.62E series documentation, a single-channel impeller is used. TECHNICAL DATA – WILO EMU FA 10.62E Parameter Value Brand WILO Series EMU FA Model FA 10.62E Motor type FK17.1-4/12KEx Type Submersible sewage pump Rated power P2 5.00 kW Power supply 3 × 400 V Frequency 50 Hz Rated current 10.80 A Motor speed 1400 rpm Nominal flow rate 115.6 m³/h Nominal head 9.1 m Protection class IP68 Operating mode S1 Maximum medium temperature 40°C Maximum immersion depth 20 m Fpjdpfx Acj Aibg Rstop Impeller diameter 220 mm Design Ex / ATEX Year of manufacture 2019 Country of manufacture Germany The stated flow rate and head values refer to the pump’s nominal operating point.

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, For sale: KSB Sewabloc K 65-250 G V industrial pump with a 2.2 kW electric motor. Centrifugal pump, monobloc design, with flanged connections. Data from the nameplates: Manufacturer: KSB Model: Sewabloc K 65-250 G V Year of manufacture: 2012 Nominal flow rate: 6.22 l/s, approximately 22.4 m³/h Head at the nominal point: 8.05 m Motor power: 2.2 kW Power supply: 230 V Δ / 400 V Y, three-phase Frequency: 50 Hz Pump speed: 1455 rpm Impeller diameter: 170 mm Motor protection rating: IP55 Motor efficiency class: IE2 Unit weight according to the nameplate: approximately 103 kg Condition: used. Visible signs of use, localized paint chipping, and superficial surface corrosion. Appearance matches the photos. Fpedpfxs Aibg Hj Actjp NOTE: THE STATED PRICE APPLIES TO ONE UNIT – ONE PUMP WITH MOTOR.

Condition: new, Year of construction: 2024, functionality: unexamined, For sale is a brand new, unused KSB KRTF 100-254/54UEG-S submersible pump, manufactured in 2024. This pump is from the renowned German manufacturer KSB and is designed for pumping municipal and industrial wastewater, as well as contaminated water. The device is characterized by a robust construction, high performance, and suitability for continuous operation in demanding industrial environments. Technical specifications: Manufacturer: KSB Model: KRTF 100-254/54UEG-S Condition: BRAND NEW – UNUSED Year of manufacture: 2024 Motor power: 5.5 kW Flow rate (Q): 104.88 m³/h Head (H): 9.10 m Supply voltage: 400/690 V Frequency: 50 Hz Rated current: 10.7/6.2 A Rotational speed: 1437 rpm Ingress protection: IP68 Insulation class: H Maximum medium temperature: 40°C Maximum immersion depth: 30 m Weight: 123 kg Operating mode: S1 – continuous operation Country of origin: France Application: Municipal and industrial wastewater pumping stations Wastewater treatment plants Sewerage systems Drainage systems Industrial plants Fpjdpo Aibguefx Actjp Water and wastewater management systems Condition of the device: The pump is brand new and has never been used. Year of manufacture: 2024. The device is in very good visual condition, as shown in the attached photos. The set includes: New KSB submersible pump Power cable Original technical documentation Accessories shown in the photos

Condition: used, functionality: fully functional, KSB ETABLOC ETB 80-200 INDUSTRIAL PUMP – 22 kW – 80 m³/h – 58 m Original KSB ETABLOC ETB 80-200 industrial pump with a 22 kW electric motor. This is a high-performance centrifugal pump designed for industrial installations, circulation systems, cooling applications, and the transport of process water. Complete pump unit from the German manufacturer KSB, equipped with an energy-efficient, three-phase IE3 motor. TECHNICAL SPECIFICATIONS OF THE KSB PUMP • Manufacturer: KSB – Germany • Series: ETABLOC / ETB • Type: ETB 80-200 • Type: centrifugal pump • Flow rate (Q): 80 m³/h (80,000 l/h) • Head (H): 58 m • Motor power: 22 kW / 22,000 W • Pump speed: 2954 rpm • Impeller diameter: 203 mm • Motor power supply: 400/690 V, 50 Hz Fodpfx Acs Aibf Estepp • Motor efficiency class: IE3 • Protection class: IP55 • Insulation class: F • Motor year of manufacture: 2017 • Serial number: 1787

Condition: new, Year of construction: 2022, functionality: fully functional, For sale: a new KSB Delta Primo SVP 3/0402 M pressure boosting system, equipped with three KSB Movitec V 4/2 B vertical pumps, each with an individual PumpDrive variable frequency drive. The system is designed for boosting and maintaining pressure in water systems. System data from the nameplate: Manufacturer: KSB Model: Delta Primo SVP 3/0402 M ID: 05082258 Date of manufacture: 17th week of 2022 Power supply: 3 × 400 V, 50 Hz Maximum current: 5.2 A Nominal system pressure: PN10 Protection rating: IP54 Control based on a pressure transducer Manufactured in: Netherlands Parameters of a single pump: Model: KSB Movitec V 4/2 B Flow rate at the point indicated on the nameplate: 4.01 m³/h Head at this point: 14 m Power rating on the nameplate: 0.55 kW (0.26 kW), 50 Hz Rotational speed: 2900 rpm Fsdj Aibfwopfx Actepp Connections: DN32, PN16 Temperature range specified for the pump: from -20 to +100°C KSB SuPremE motor, efficiency class IE5 Equipment: 3 KSB Movitec pumps 3 KSB PumpDrive variable frequency drives Control cabinet with operating panel and main switch Stainless steel manifolds Isolation valves Pressure gauge and pressure transducer Diaphragm tank Common mounting frame Operating and installation manual Condition: new. The system shown in the photos is for sale.

Condition: excellent (used), For sale: KSB ETACHROM BC centrifugal pump equipped with a Siemens electric motor. Fsdpfxo Aibdgo Actopp The pump is made of stainless steel and designed for industrial applications. The entire unit is mounted on a base. Pump specifications: Manufacturer: KSB Aktiengesellschaft Model: ETACHROM BC Flow rate Q: 11.00 m³/h Head H: 25.39 m Rotational speed: 2880 rpm Year of manufacture: 2007 Material No.: 00 Serial No.: 9971266604 Flanged connections Motor: Siemens Total weight of the unit: approx. 31 kg The unit has a sticker from the German electric motor repair shop ROCK Elektromotoren Reparaturwerk, indicating that it has been inspected according to VDE, UVV, VBG 4 and DIN standards. The pump is used and in very good visual condition. Condition and completeness are exactly as shown in the pictures. A robust industrial pump from the renowned manufacturer KSB.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Fedpfj Aibdcox Actopp Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: excellent (used), functionality: fully functional, For sale: a FLYGT Ready 4L submersible pump, designed for draining basements, sumps, and flooded areas. Maximum flow rate according to the provided data: up to 14,400 liters per hour (14.4 m³/h / 240 l/min). Fpedps Aibc Usfx Actjp The pump is equipped with a Storz-type discharge connection, a power cord with a plug, and a carrying handle. Used condition, with visible signs of wear, scratches, and dirt. The set includes the pump and accessories as shown in the pictures.

Condition: used, functionality: fully functional, For sale: KSB KRTF 80-200/24 UH industrial submersible pump, designed for pumping wastewater and contaminated water. Robust, cast iron construction with a lifting handle. Fpsdpfxj Aibc He Actjp Data from the nameplate: Capacity: 45 m³/h – 45,000 liters per hour Head: 5 m Motor power P₂: 1.8 kW Power supply: three-phase 400 V Frequency: 50 Hz Rated current: 4.3 A Rotational speed: 1450 rpm Ingress protection: IP68 Operating mode: S1 – continuous operation Insulation class: F Weight: 108 kg Equipment visible in the photos: Float switch Power cord with plug and electrical module Discharge elbow with barbed connector Lifting handle The pump is used, with visible signs of wear, paint chipping, and surface corrosion. The visual condition and scope of sale are shown in the photos.

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Manufacturer: Hidrostal Fedpfx Aj Aibc Aoctopp Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Rotational speed: 2730 rpm Power factor cos φ: 0.86 Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle.

Condition: excellent (used), functionality: fully functional, For sale: PUMPEX PC 2001 H industrial submersible pump with a 5.8 kW three-phase motor and a flow rate of 70,000 liters per hour (70 m³/h). Robust construction with a lower suction basket, an upper discharge connection with a quick coupling, and a carrying handle. Technical specifications: Manufacturer: PUMPEX AB, Sweden Model: PC 2001 H Motor power: 5.8 kW Flow rate: 70,000 l/h – 70 m³/h Power supply: 400 V, three-phase Rated current: 12 A Fpodpj Aibciofx Actjp Rotational speed: 2830 rpm Maximum immersion depth: 20 m Insulation class: F Included: pump, power cable, connection module with a power socket, and a discharge connection with a quick coupling. Condition: used, with visible signs of wear, scratches, paint chips, and localized corrosion. Visual condition and accessories are shown in the photos.

Condition: new, functionality: unexamined, SULZER ABS XFP100C SUBMERSIBLE SEWAGE PUMP – 3.4 kW – 400 V – DN100 – ATEX Fpodpfe Aibb Eex Actjp Professional industrial pump for sewage, drainage, pumping stations, and wastewater treatment plants. For sale is an original SULZER ABS XFP100C-CB1.2-PE29/4-C-50EX submersible pump from the renowned SULZER pump manufacturer. The sewage pump is equipped with an energy-efficient IE3 motor and Contrablock hydraulics, which reduce the risk of the impeller becoming clogged with solid and fibrous contaminants. Maximum flow rate: 157,000 l/h (157 m³/h). Maximum head: 13 m. SULZER ABS XFP100C 3.4kW 400V DN100 ATEX submersible sewage pump. Manufacturer's code: XFP100C. KEY ADVANTAGES ✅ High flow rate of 157 m³/h – suitable for professional drainage and industrial installations. ✅ 400 V, 3.4 kW three-phase motor – efficient IE3 class electric drive. ✅ Contrablock impeller – a design that minimizes the risk of the pump being blocked by contaminants. ✅ ATEX / Ex certified – factory explosion-proof marking II 2G Ex d IIB T4 Gb. ✅ IP68 protection rating – the pump is designed for submerged operation. ✅ DN100 outlet – for industrial and municipal sewage pumping systems. ✅ Robust SULZER ABS construction – a professional solution for demanding applications. SULZER ABS XFP100C 3.4kW 400V DN100 ATEX submersible sewage pump, ABS brand. TECHNICAL DATA Manufacturer: SULZER / ABS Model: XFP100C-CB1.2-PE29/4-C-50EX Type: Submersible sewage pump Power input P1: 3.4 kW Motor power P2: 2.95 kW Power supply: 400 V / 3 phases / 50 Hz Rated current: 6.4 A Rotational speed: 1437 rpm Maximum flow rate: 157 m³/h Maximum head: 13 m Outlet diameter: DN100 Impeller diameter: 195 mm Efficiency class: IE3 Protection rating: IP68 ATEX marking: II 2G Ex d IIB T4 Gb Standard: EN 12050-1 Weight: 110 kg Production: Ireland Qmax and Hmax values are maximum parameters and do not occur simultaneously. APPLICATION OF THE SULZER XFP100C PUMP Pump for industrial and municipal sewage, designed for use in: Sewage pumping stations and drainage systems. Wastewater treatment plants. Industrial and production plants. Water and wastewater management systems. Sewage pumping installations with contaminants. Municipal and industrial pumping installations. CONTRABLOCK TECHNOLOGY AND IE3 MOTOR The SULZER ABS XFP100C drainage pump uses Contrablock hydraulics, designed to minimize problems with impeller clogging. The IE3 class motor provides high energy efficiency, which is particularly important in professional industrial installations. CONDITION AND OFFER CONTENTS The sale includes the pump shown in the original photos, along with the power cable, carrying handle, and documentation and accessories visible in the photographs. Technical condition and usage history – new. The SULZER ABS XFP100C is a professional 400 V, DN100, ATEX sewage pump designed for demanding industrial and municipal applications.

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). ✔️ Condition: NEW ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks 📦 Set includes: ✔️ KSB pump ✔️ Power cable ✔️ Float switch Fodpfxs Aibake Actspp ✔️ Documentation ✔️ Original packaging

Condition: used, Year of construction: 2021, functionality: fully functional, KSB ETNV 100-080-315 INDUSTRIAL PUMP – VERTICAL SUBMERSIBLE ETANORM V Original KSB centrifugal pump | German production | Year 2021 | Robust industrial design For sale is a KSB ETNV 100-080-315 vertical industrial pump from the Etanorm V series, manufactured by the renowned German company KSB. This submersible pump is designed for technological installations, industrial tanks, and liquid transport and circulation systems. Its design with an extended shaft allows for vertical mounting with the drive located outside the pumped medium. The unit finds application in industries, production plants, cooling systems, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Manufacturer’s code: ETN-V-100-080-315 TECHNICAL DATA OF THE KSB PUMP Manufacturer: KSB SE & Co. KGaA – Germany Model: ETNV 100-080-315 Series: KSB Etanorm V Design: GGSD Year of manufacture: 2021 Impeller diameter: Ø 334 mm Capacity: 135.99 m³/h Head: H 36.80 m (to be confirmed) Type: centrifugal pump, vertical, submersible Mounting: vertical, flanged Discharge nozzle: side, flanged Drive: external, via shaft and coupling Electric motor: not included Stock number: 1199 KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Brand: KSB ADVANTAGES AND CHARACTERISTICS ✔ Renowned KSB brand – German manufacturer of industrial pumps and valves. ✔ Vertical design – adapted for installation in tanks and technological installations. ✔ Centrifugal pump – a solution for transporting and circulating industrial liquids. ✔ Robust housing – durable construction with flanges, shaft, and coupling elements. ✔ External drive – possibility of cooperation with a suitably selected electric motor. ✔ Industrial applications – suitable for production, technological, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Type: Other APPLICATION OF THE KSB SUBMERSIBLE PUMP Industrial tanks and vats. Technological and production installations. Cooling and water circulation systems. Fedpfxo Aia E Tj Actopp Process liquid transport systems. Washing and degreasing installations. Industrial plants and maintenance. Pumping systems with vertical mounting. Selecting a pump for a specific liquid type and installation parameters requires checking the technical documentation. The item for sale is exactly the one shown in the photographs. The KSB Etanorm V pump is a proposition for industrial plants, pump service companies, maintenance departments, and companies looking for a vertical pump, a replacement unit, or a part for an industrial installation.

Condition: used, Year of construction: 2015, functionality: fully functional, KSB ETANORM GPV 150-125-250 GG INDUSTRIAL PUMP – VERTICAL CENTRIFUGAL PUMP, 200 m³/h Original KSB Etanorm GPV 150-125-250 GG centrifugal pump from the German manufacturer KSB, designed for industrial process systems, pumping systems, and liquid circulation. The robust vertical design with a volute casing and extended shaft allows the pump to be used in process tanks and industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump. Manufacturer's code: PV 150-125-250 GG. TECHNICAL SPECIFICATIONS Manufacturer: KSB Aktiengesellschaft – Germany Model: ETANORM GPV 150-125-250 GG Type: industrial, centrifugal, single-stage pump Design: vertical, tank-mounted, with volute casing Nominal flow rate Q: 200 m³/h (200,000 l/h) Head H: 20 m Rotational speed: 1477 rpm Impeller diameter: 255 mm Pump nominal size: 150-125-250 Material: GG – cast iron Year on nameplate: 2015 Stock designation: No. 1462 Condition: used, without electric motor Hydraulic data matches the pump nameplate. Fjdj Aia E Espfx Actepp KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, KSB brand ADVANTAGES AND CHARACTERISTICS Original pump from a renowned industrial equipment manufacturer. High flow rate – 200 m³/h. Vertical design for installation in tank systems. Robust volute casing and centrifugal impeller. Flanged connections for process systems. Can be used as a replacement pump or a source of KSB spare parts. Design intended for use in industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, other type. APPLICATIONS OF THE KSB ETANORM GPV PUMP Industrial pumps from the Etanorm GPV series are used in: industrial and production plants, liquid circulation and transport systems, process and technology tanks, industrial washing systems, flushing and degreasing systems, surface treatment systems, technological water circulation systems. Selecting the pump for a specific medium requires checking the material compatibility and operating parameters. TECHNICAL CONDITION – USED PUMP The offered KSB Etanorm GPV 150-125-250 pump comes from an industrial plant. The unit has traces of use and storage, including local corrosion on the impeller, shaft, and flange surfaces. The pump is equipped with a volute casing, impeller, shaft, vertical column, and mounting elements visible in the photos. The stock designation has the inscription "Einsatzbereit" (ready for use). The pump is functional after service in Germany.