MiMtechnik GmbH

Condition: good (used), Year of construction: 2002, functionality: fully functional, Technical details x-axis 2800 mm y-axis 2200 mm z-axis 800 mm control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. Gksdpe Akbtgjfx Actjd With a cross travel of 2200 mm and a high-speed spindle with 18000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: used, Year of construction: 1997, Offered is a machining center with a vertical spindle. Inspection possible by arrangement. Godpo Ai T Atsfx Actskd

Condition: used, Year of construction: 1999, Offered is a machining center with a vertical spindle. Inspection possible by arrangement. Gjdpfs Ai T Apex Actekd

Condition: used, Year of construction: 2012, Offered is a profile machining centre with a swivelling workpiece support. Control: operator panel with screen, keyboard and separate controls, pneumatic workpiece clamps, tool rack with five tool holders fitted with tools, protective hood with viewing window. Inspection possible by arrangement. Godps Ai Tzrjfx Actokd

Condition: used, Year of construction: 2006, Chain-type tool magazine: 60, commissioning date: 26.07.2007, scraper-type chip conveyor, spindle max. 14000rpm, NC table with a min. indexing increment of 0.001°, pallet positioning with a minimum angular increment of 0.001° instead of the standard version with 1°, chain-type tool magazine with 60 positions, I/F for 70bar high-pressure coolant system (with side-through spindle coolant supply), DLAB 50F transformer: 54kVA, control options: ATA card, AI Contour Control and Fast Data Server, coolant gun for cleaning workpieces and fixtures, control: MSX-701 III, NC software: G103/02.4, PLC software: I81191A08, MAPPS I98143B47, machining time: approx. 13901h, power-on time: approx. 32187h, weight: 12.4t. Inspection possible by arrangement. Gjdpfx Ao Aiu R Eoctjkd

Condition: used, Control: MSC-516. Accessories are available and included in the offer. The exact scope of delivery is yet to be clarified. Inspection possible by prior arrangement. Gkodpfx Ae Ah Tx Njcted

Condition: new, Year of construction: 2024, operating hours: 50 h, spindle speed (min.): 1 rpm, spindle speed (max.): 4,500 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 8, Equipment: chip conveyor, documentation/manual, Technical specifications: Control system: Fanuc 0I TF Plus, 15'' screen Main spindle Clamping device: 177E, optional (Hainbuch...) Spindle height: Spindle bore: Ø 79 mm Max. bar diameter: Ø 51 mm Spindle mounting: A2-6 Drive power: 7.5/11 kW Spindle speed: 4,500 rpm Gjdpfxo Ahy Uij Actskd Counter spindle Clamping device: 173E, optional (Hainbuch...) Spindle bore: Ø 48 mm Max. bar diameter: Ø 32 mm Spindle mounting: A2-4 Drive power: 3.7/5.5/7.5 kW Spindle speed: 5,000 rpm Turret for counter spindle Interface: VDI 25 Stations: 8 powered tool stations Drive power: 2.2 kW Max. speed: 6,000 rpm Indexing time: 0.1 - 0.3 seconds Upper turret Interface: BMT 45 Stations: 12 powered tool stations Drive power: 2.2/3.7 kW Max. speed: 6,000 rpm Indexing time: 0.1 - 0.3 seconds Standard equipment: Transformer Parts collector Parts conveyor Chip conveyor Coolant tank, 250L Machine status indicator: 3-color Machine dimensions: L x W x H 2,810 x 1,970 x 1,850 mm (without chip conveyor) Machine weight: 5,350 kg

Condition: used, Year of construction: 2001, A CNC machining center with 3 axes is offered. Travel X/Y/Z: 630mm/500mm/500mm. Table load capacity: 400kg. Tool taper: SK 40. Number of axes: 3. Spindle hours: approx. 7300h. Operating hours in motion: approx. 7300h. The buffer battery must be replaced. The hour meter readings are stated as approximate values. Control: Heidenhain TNC 426. Equipped with a 16-position chain-type tool changer, coolant system, chip flushing gun, touch probe and handheld control unit. Weight: approx. 4800kg. Inspection possible by arrangement. Godpfe Ahy Sysx Actjkd

Condition: used, Year of construction: 2002, A CNC machining center with 4 axes is offered. Travel X/Y/Z: 600mm/450mm/450mm. Table load: 1000kg. Tool taper: SK 40. Number of axes: 4. Machine body: mineral casting. Spindle hours: 6372h. Operating hours in motion: 6392h. Control: Heidenhain TNC 530. Equipped with a permanently mounted rotary clamping fixture, 30-position carousel tool changer, coolant system, chip washing gun, touch probe and handheld control module. Weight: approx. 6500kg. Inspection possible by arrangement. Gkedps Ahy Svjfx Actsd

Condition: used, Year of construction: 1997, A 5-axis machining center is offered. Travels X/Y/Z: 800mm/600mm/500mm. Table clamping surface X/Y: 540mm/540mm. Maximum workpiece weight: 300kg. Rapid traverse X/Y/Z: 35m/min. Tool magazine: 30 positions. Control: HEIDENHAIN TNC 430. Equipped with an NC swiveling rotary table, tool changer, protective enclosure and coolant system. Axis damage requiring repair. Repair quotation from the manufacturer is available. Inspection possible by arrangement. Gedpfx Aco Ahq Rdstekd

Condition: used, Year of construction: 2002, Offered for sale is a CNC machining center. Control: GE Fanuc Series 16i-M. Equipped with a fully enclosed machine guarding, viewing windows, electronic handwheel and signal light. Inspection possible by arrangement. Gkodpfx Acj Ahi Smjtjd

Condition: used, Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement. Gjdpfxe Agwqaj Actjkd

Condition: used, Year of construction: 1999, A vertical CNC machining center is offered. Heidenhain CNC control. Equipped with: Tool magazine with tool changer, chip conveyor, enclosed work area with safety doors, separate CNC control panel. Weight: approx. 13000kg. The machine is defective and therefore in need of repair. Viewing possible by appointment. Gksdpfx Acs Agn Nwjted

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Gkjdpfx Aj Adzdgsctod

Condition: used, Year of construction: 2008, X-axis travel: 1016mm, Y-axis travel: 610mm, Z-axis travel: 760mm, distance from spindle nose to pallet: 150-910mm, distance from spindle axis to column: 635mm, distance from spindle axis to front of machine: 820mm, distance from table to floor: 959mm, working surface dimensions: 1270x590mm, number of T-slots: 5, T-slot width: 18mm, center T-slot dimensions: 18 H6 mm, centering bore diameter: 30 H6 mm, T-slot spacing: 125mm, max. table load: 1350kg, working feed rate: 0-15m/min, max. programmable feed rate: 40m/min, rapid traverse speed: 40m/min, acceleration: 5m/s², max. spindle speed: 10,000rpm, control system: HEIDENHAIN, length: 2750mm, width: 2120mm, height: 2100mm, weight: approx. 7.7t, operational hours counter: approx. 17,000h, including documentation. An on-site inspection is possible. Gsdpfj Adt Idjx Actskd

Condition: used, Year of construction: 2008, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment. Gedpfxsz R Uw Aj Actjkd

Condition: used, Year of construction: 2004, X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible. Gedpez R A Nfofx Actokd

Condition: used, Year of construction: 2000, Offered for sale is a vertical CNC machining center with tool changer. Control system: HAAS CNC control with operator monitor and keyboard. Equipped with automatic tool changer, machine table, enclosed work area, control pendant and tool cart with tool holders. Inspection possible by arrangement. Gkedpfxjz N Haro Actjd

Condition: used, Year of construction: 2008, Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation. Gkedsz Nwckjpfx Actod

Condition: used, Year of construction: 2011, A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement. Gksdpfoz Irmtox Actsd

Condition: used, A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment. Gksdpfx Acjz Hzd Sstjd

Condition: used, Year of construction: 1994, A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible. Gkedpfxsz Hn S Ae Actsd

Condition: used, Year of construction: 2001, A CNC machining center is offered. Control: CNC control with control panel. Equipped with workholding fixture and coolant system. The boards are presumably defective. Inspection possible by prior arrangement. Gksdpfx Aez Hlxtoctjd

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Gkjdpfoz Dkilsx Actsd

Condition: used, Year of construction: 2007, A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement. Gsdoz Da Rxopfx Actjkd