Lynderup Group ApS

Condition: like new (used), Year of construction: 2022, operating hours: 1,564 h, functionality: fully functional, turning length: 515 mm, turning diameter: 190 mm, spindle motor power: 15 W, spindle speed (max.): 4,500 rpm, spindle bore: 65 mm, travel distance X-axis: 152 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 515 mm, CN FANUC Series i Ihsdoyvvbvjpfx Abnew Bar feeder interface Bar feeder LNS QUICK LOAD SERVO 80 High-pressure unit 15 bar Set of driven and static tool holders HAINBUCH collet chucks Chip conveyor

Condition: used, Year of construction: 1998, LATHE SAMSUNG PL 25 SELF-CENTERING CHUCK DIAMETER: 250 mm BAR CAPACITY: 75 mm COMPLETE WITH ALL DOCUMENTATION Ihedpfx Aboyvtx Senow

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135908, turning diameter: 710 mm, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 6,000 mm, total width: 2,500 mm, overall weight: 14,000 kg, spindle diameter: 120 mm, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OPS-P 200 L, tool weight: 1,000 g, number of slots in tool magazine: 20, Equipment: chip conveyor, OKUMA MULTUS B 300 CNC Turning and Milling Center Isdpfx Ajyvrq Hsbnohw - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 96 A - Connection load: 47.8 kVA - Swing diameter over bed: 710 mm - Distance between centers: 1500 mm - B-axis travel: 1550 mm, rapid traverse: 12 m/min - C-axis travel, control angle: 360°, rapid traverse: 200° - B-axis indexing angle: 0.001° - Number of tools: 1 L or M tool 25 mm, diameter: 40 mm - Rotational speed of live tools: 6000 rpm - Tool holder: HSK 63 - Including chip conveyor, coolant system, as well as tool holders as equipped on the tool changer Note: The item must be collected between 12.05. and 22.05.2026 on a binding, mutually agreed date. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 151576, travel distance X-axis: 690 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,500 mm, total length: 9,500 mm, total width: 2,500 mm, overall weight: 14,500 kg, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OSP-P 200 L, tool diameter: 90 mm, tool weight: 1,000 g, number of slots in tool magazine: 40, OKUMA MULTUS B 400 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 190 A - Connection load: 58.9 kVA - Turning diameter: up to max. 710 mm - Swing diameter over cross slide/bed: 710 mm - Y-axis travel: +115 / -115 mm - C-axis travel: 360° - B-axis travel: 225° - Main spindle chuck diameter: 340 mm - Spindle nose diameter (front bearing): 150 mm - Spindle bearing diameter: 101.6 mm - Feed rate in X/Y/Z: 0 - 1000 mm/rev - Rapid traverse X/Y/Z/W: 40/26/40/20 m/min - Rapid traverse C-axis: 200 rpm, B-axis: 30 rpm - NC tailstock (W-axis) - Taper: MK 4 - Tool holder: HSK 63 - Including chip conveyor and coolant system Note: The HSK tool holders in the tool magazine are included in the scope of delivery! Note: In 2023, the machine underwent several overhauls with a total value of EUR 34,000. Documentation available; detailed breakdown upon request! Ihsdpfeyvrn Eex Abnew Note: Item must be picked up bindingly between 12.05. and 22.05.2026 on a date yet to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function Ijdpoyviigefx Abnshw ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Isdeyvfwfjpfx Abnohw Very good condition. Can be viewed under power. The machine's geometry has been checked and corrected/adjusted.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 380 mm, turning diameter: 165 mm, spindle speed (max.): 5,000 rpm, bar passage: 51 mm, controller model: Mitsubishi MELDAS, Machine in very good condition, fully functional both electrically and mechanically! TECHNICAL DETAILS Maximum bar capacity: 51 mm Maximum turning diameter: 165 mm Maximum turning length: 380 mm Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 5,000 rpm Tool turret Number of tool turrets: 2 Positions per turret: 12 Driven tools possible MACHINE DETAILS Control: Mitsubishi MELDAS Machine weight: 8,000 kg EQUIPMENT Ihsdpfsyvfvbex Abnsw Y-axis Simultaneous machining possible High rigidity and process reliability Complete technical documentation available

Condition: excellent (used), Year of construction: 2006, operating hours: 8,513 h, functionality: fully functional, machine/vehicle number: 8042942323C, We are offering this refurbished Gildemeister CTX 310 V4 CNC SIEMENS 840 D SHOPTURN CNC turning and milling center, year of manufacture 2006. Serviced and prepared for transport Extensive tool accessories included, such as tool cabinets and measuring devices Iodpfx Aoyvfq Sebnjhw Year of manufacture: 2006 Weight: 3950 kg Maximum spindle speed: 6000 rpm Connected load: 26 kVA Max. connection current: 35 A Current: 38 A Mains voltage: 400 V Frequency: 50/60 Hz Control voltage: 230 V Control power consumption: 150 W Internal voltage: 24 V If you have any questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,752 h, functionality: unexamined, Equipment: documentation/manual, We are offering this ready-to-use GILDEMEISTER CTX 200 series 2 CNC turning and milling center, year of manufacture 2001. Manufacturer: GILDEMEISTER Type/Model: CTX 200 series 2 Contrary to the photo, the machine is sold with a three-jaw chuck and not a collet chuck; various VDI20 toolholders are included as well. The short bar feeder has not been in operation for a long time, so its condition is unknown. If you have any questions or need more information, feel free to send us a message or give us a call. Ihsdjyu Uytspfx Abnsw

Condition: good (used), Year of construction: 2005, EMCOTURN 345/II TCM "BAR": 2-axis CNC lathe, 13 kW drive power, 60-6300 rpm at the main spindle, linear guideway system, digital drive system, includes: * 12-position VDI 30 axial turret with directional logic, for up to 6 driven tools, torque 16 Nm, speed range 0-5000 rpm * C-axis * Mechanical spindle brake * TRANSMIT software for easy C-axis programming * Tailstock with quill: - Quill diameter: 60 mm - Quill stroke: 120 mm - Morse taper MK4 - Max. quill force: 5000N Ihedpsyu Un Rsfx Abnew * Headstock size 45 with spindle nose KK5 (DIN 55026) * Hollow clamping cylinder including draw tube * EMCO standard bar feeder interface * Coolant pump 3 bar * Fanuc 21i * Machine light for work area * Hydraulic unit * Interface for foot switch and chip conveyor * Swivel-mounted measuring equipment tray * Integrated step-down transformer for 3x230, 3x400, or 3x480 Volt - 50/60 Hz * Documentation Year of manufacture: 2005 Machine No.: R2AT3551

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Mori Seiki SL-25 CNC Lathe with Samsys Bar Feeder We are offering a highly reliable and robust Mori Seiki SL-25 (1995) CNC lathe. This machine is well known for its exceptional stability and precision in serial production and is sold complete with a Samsys automatic bar feeder (2003) for maximum efficiency. Machine Specifications Model: Mori Seiki SL-25 Control: Mori Seiki 516 (Fanuc CNC control and drives) Swing over bed: approx. 520 mm Max turning diameter: approx. 260 mm Max turning length: approx. 530–550 mm Spindle bore: 68 mm Spindle speed: up to 3,500 rpm Turret: 10 stations Tool setter and parts catcher included Equipment: Hydraulic tailstock, chip conveyor, and coolant system Documentation: User manuals included Productivity: The combination of Mori Seiki’s rigid construction and Samsys automation makes this an ideal solution for small to medium batch production. Samsys Bar Feeder (MUS 2000) The machine is equipped with an integrated Samsys MUS 2000 bar feeder, enabling long periods of unattended production. Includes multiple spindle liners in various dimensions Ihjdpfjyu R Rzsx Abnew High precision: Servo-controlled bar feed for accurate positioning Quick changeover: User-friendly design allowing fast change of bar diameters

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 7,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, total height: 1,635 mm, total width: 1,690 mm, overall weight: 2,600 kg, controller manufacturer: FANUC, product length (max.): 1,850 mm, number of axes: 3, This 3-axis DN SOLUTIONS Leo 1600 turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 320 mm and a turning length of 303 mm. The machine is equipped with a 6-inch main spindle chuck and offers a rapid traverse speed of 30 m/min in both X and Z axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS Leo 1600 machine we have for sale. Contact us for further details. • Main spindle chuck size: 6 inch (153 mm) • Bar capacity: 45 mm • Rapid traverse X: 30 m/min Iodpsyu R Nwofx Abnjhw • Rapid traverse Z: 30 m/min • Main spindle torque: 72 Nm • Max turning diameter: 320 mm • Max turning length: 303 mm • Number of tool stations: 12 • Guideway type: Linear guideways • Monitor size: 10.4 inch • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 14.97 kVA • Full load current: 22.74 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, total height: 2,315 mm, total width: 2,067 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 4,530 mm, number of axes: 4, This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details. • Main spindle chuck size: 12 in (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min Ijdpeyu Rn Tefx Abnshw • Max turning diameter: 420 mm • Max turning length: 1285 mm • Driven tool speed: 5000 rpm • Tooling: 12 stations, BMT65 • Guideway type: Box guideways • Axes/features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz • Electrical ratings: 55.02 kVA; Full load current 83.60 A; Short circuit capacity 10 kA; Interrupting capacity 5 kA Additional equipment • Chip conveyor (included) Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2008, operating hours: 3,858 h, CNC controller: MSX-850III X-axis travel mm: 260 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 275 Upper turret Number of tool slots St .: 12 Ihedjyuy H Sopfx Abnsw Main spindle Speed ​​spindle rpm: 4000

Condition: good (used), Year of construction: 2022, operating hours: 1,759 h, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, overall weight: 5,000 kg, Technical Data Total operating hours: 1759 h Spindle hours: 1130 h Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm Travel X-axis: 242 mm Travel Y-axis: 80 mm Travel Z-axis: 540 mm Max. spindle speed: 5000 rpm Spindle drive: 16.5 kW Machine weight: approx. 5 t Ijdpfxoyuy Ene Abnehw Footprint: m Standard Equipment Ergonomic control panel DMG MORI SLIMline® Main spindle: A2-6 with AC motor Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm 12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling) Direct measuring system: X-, Y-axis Chip pan Hollow clamping device: max. bar capacity D65 mm Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device, Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm External electronic handwheel Y-axis: +/- 40 mm DMG MORI loTconnector Special Equipment - Bar package & interface includes: - Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor, right-side discharge in place of chip tray - 4-color signal lamp - Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system - Collet chuck HAINBUCH SPANNTOP size 65 - Differential pressure clamping for sub spindle - External chuck rinsing for sub spindle - Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing - Hydraulic 3-jaw chuck SMWBD-175 for sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun 5 bar - Pre-installation for oil mist extractor Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measurement device in working area, make: MARPOSS - Automatic loading magazine for short bars IEMCA KID80/16, bar capacity D65 Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along spindle axis Color: DMG MORI standard Available functions for bar feeder: - Bar feed M69 - Bar change M65 - Handshake M66 - Parts conveyor Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area All information without guarantee.

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 45,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 362 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 2,155 mm, total height: 2,272 mm, total width: 2,275 mm, overall weight: 12,200 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 5,879 mm, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 5100 LMB was manufactured in 2024. It features a maximum turning diameter of 650 mm and a turning length of 2002 mm, along with a main spindle chuck size of 21 inches (535 mm). The machine includes a rapid traverse speed of 16 m/min and a maximum spindle speed of 1500 rpm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 LMB turn-mill centre we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min Iodpfjyuy Agex Abnjhw • Main spindle torque: 2957 Nm • Max turning diameter: 650 mm • Max turning length: 2002 mm • Driven tool speed: 4000 rpm • Number of tool stations: 12 • Tool holder type: BMT75 • Guideway type: Box guideways • C-axis: Yes • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 61.56 kVA • Full load current: 93.53 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment • Chip conveyor (included) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 45,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 362 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,105 mm, total height: 2,194 mm, total width: 2,056 mm, bar diameter (max.): 166 mm, overall weight: 10,750 kg, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI Touch, product length (max.): 4,759 mm, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 5100 MB was manufactured in 2023. It features a maximum turning diameter of 650 mm and a turning length of 952 mm. The machine is equipped with a 21-inch main spindle chuck and offers a rapid traverse speed of up to 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 MB turn-mill centre we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min • Rapid traverse Z: 20 m/min • Max rapid traverse: 20 m/min • Main spindle torque: 2957 Nm • Max turning diameter: 650 mm • Max turning length: 952 mm • Driven tools speed: 4000 rpm Ihedsyuywkjpfx Abnsw • Number of tool stations: 12 • Tool interface: BMT75 • Guideway type: Box guideways • Spindle bore: 117–166 mm (depending on configuration) • Coolant system: High pressure coolant through turret • Tailstock: Programmable tailstock • Tool measurement: Automatic hydraulic tool measurement • Cutting force monitoring: Yes • Thread cutting: Fixed entry point with variable speed • Additional handwheel: Yes • Automatic machine door: Yes • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 61.56 kVA • Full load current: 93.53 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment • Chip conveyor: Included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 5,816 h, functionality: fully functional, machine/vehicle number: MLO237-000571, turning length: 513 mm, turning diameter: 300 mm, spindle motor power: 18,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 200 m/min, rapid traverse Z-axis: 30 m/min, torque: 47 Nm, feed rate X-axis: 24 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 30 m/min, total height: 1,700 mm, bar diameter (max.): 65 mm, quill diameter: 80 mm, quill travel distance: 80 mm, swing diameter over bed slide: 600 mm, overall weight: 3,700 kg, spindle diameter: 210 mm, Equipment: documentation/manual, Explore this excellent condition, robust and versatile DOOSAN PUMA GT 2100M as a high-performance CNC Horizontal Turning Center with powerful Milling capabilities - C-AXIS, designed as a "global standard" machine for high-precision and complex part machining. Equipped with C-AXIS (offering enhanced Milling capabilities) and a generous 513 mm Turning Length, Fanuc I Control unit, 4500 RPM Spindle Speed, and a super robust 18,5 kW Motor, this turning machine offers precision, power and versatility for your turning needs. Iodpfx Abeyuyhponjhw Committed to quality, durability, and efficiency, this Turning Center equipped with C-AXIS, is integral to various industries, such as aerospace, energy and automotive, meeting the rigorous demands of modern industrial production while maintaining the strong reputation for reliability. Manufacturer: DOOSAN Model: PUMA GT2100M Machine type: CNC Turning and Milling Center (C-AXIS) Condition: Excellent Condition - (Used) - Ready to use Year of construction: 2017 Cutting Time: 5816 hours Category ID: 1128 Type ID: 2239 If you have any questions or need more information, feel free to send us a message or give us a call. Kind Regards, 0040 733 55 80 41

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Ihsdpfx Aoyux S Hsbnow

Condition: used, MORI SEIKI TL-5 CNC LATHE Ihjdpfsyuxvlex Abnjw MAKE MORI SEIKI, MADE IN JAPAN MODEL TL-5 YEAR 1980 RETROFITTED 2016 CONTROL FAGOR 8055 I SWING OVER BED 520.0 mm SWING OVER CARRIAGE 380.0 mm MAX MACHINING DIA 280.0 mm MAX WORK LENGTH 2000.0 mm CHUCK DIA 300.0 mm SPINDLE RANGE 17 – 2000 RPM SPINDLE NOSE A2 - 8 SPINDLE BORE 75.0 mm TURRET 8 STATIONS TAILSTOCK YES PLUS RETROFITTED WITH MODERN FAGOR 8055i CONTROL. 3 SPEED GEARBOX HYDRAULIC STEADY SWARF CONVEYOR COMPLETE SET OF MANUALS FULLY WORKING ORDER

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Location: This lot is located in Birmingham, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Ihodpjyuv Sdsfx Abnjw

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, turning length: 2,260 mm, turning diameter over cross slide: 690 mm, turning diameter: 690 mm, spindle motor power: 40,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 115 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 2,260 mm, rotational speed (min.): 4,000 rpm, chuck outer diameter: 500 mm, spindle nose: A11, swing diameter over bed slide: 690 mm, tool length: 500 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 20,000 N, Equipment: rotational speed infinitely variable, Overhauled 5-Axis CNC Turning-Boring-Milling Centre WFL M60 Millturn / 2000mm with control Siemens Sinumerik 840D PL. YOC: 2004 The machine is completely overhauled, fully checked and fully working. The Turninmg -boring-milling und and the tailstock are completely refurbished. Milling spindle and spindle bearings are new. Cables and hydraulic hoses area also new. The machine geometry is within the original protocol values of a new machine (with measuring protocol). The machine is equipped with steady rest slide and tailstock (both with autom. Positioning and extremely rigid hydraulic clamping on the bed. Chuck and steady rest according to customer requirement (brand new items will be included). Chuck dia. Max. 500mm and steady rest max. 380mm opening dia. Tool system is HSK100 (external 90 station magazine with ATC). The machjine is equipped with glass scales for all linear machining axis. Furtthermore the machine is equipped with a 80 bar high pressure pump for deep hole drilling and 2t feed force for Z, X- and Y axis. The B-axis increment is 0.001° and is equipped with and additional indexing system with extremely high torque. Putting into operation and Training can be offered upon request. If rquired the outside colour can be adjusted according to customer requirements. Ihjdjyuu A Iopfx Abnew Main spindle: 40kW (S1) Milling spindle: 25kW (S1) 4000rpm Tool system: HSK100 Magazin: 3x30 Plätze

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 1,000 mm, spindle speed (min.): 6,000 rpm, Mazak QTN 200M 1000 mm C axis With driven tools Ihjdpfx Abjyuuxconew

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 2,500 mm, Mazak INTEGREX 50YR-2500U – Technical Data Machine type: CNC Turning/Milling Center / Multitasking Ihedpjyuucnefx Abnow Manufacturer: Mazak Control: MAZATROL PC-Fusion CNC 640MT Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning- and Milling Center (Multi-functional-Machine) | Brand: MAZAK Type: INTEGREX e-650H II | Year of construction: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as at 10 March 2026): - Total: 91.430 h - Automatic operation: 52.054 hours - Automatic machining: 38.974 hours - Pure machining: 31.316 hours TECHNICAL SPECIFICATIONS: Workspace: - Max. Swing diameter: 920 mm - Max. Swing diameter over tool slide: 920 mm - Max. Turning diameter: 1.100 mm Main spindle: - Max. speed: 1.600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1.000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4.500 Nm Tailstock (programmable): - Chuck: MK 6 Milling spindle: - Turret type: Single-spindle with ATC - Tool shank: Steep cone 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0,0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10.000 rpm - Milling spindle motor, AC: 37 kW Travel ranges: - X-axis: 1.025 mm Isdpfxoyuq Dze Abnjhw - Y-axis: 650 mm - Z-axis: 6.423 mm - B-axis swivel range: 240° Dimensions: - Spindle centre height: 1.350 mm - Length: 13.267 mm - Width: 3.938 mm - Height: 3.920 mm - Weight: 41 tons Additional information: - Rated power (100% continuous operation): 99,5 kVA Automatic tool changer: - Number of tools: 120-position, SK50 DIN 69871 SPECIFICATIONS / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Documentation - CE marking - Further excellent optional extras ... Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.