Hymor UG

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) Bodsynkwnepfx Af Uscw • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm Bsdpfx Afeylynwe Uecw • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: used, Grafisk Maskinfabrik - Slitter Rewinder LS-350 Working width: 350 mm Bedpfx Afeylc Umo Ujcw Connection voltage: 400V

Year of construction: 2019, condition: excellent (used), functionality: fully functional, The Linx 8920 CIJ (Continuous ink jet printer) Print head included MIDI MK11 V4 Bcsdoyinpvepfx Af Usw Stainless steel machine stand included. Service module requires replacement. Serial number KF680 See data sheet below

Condition: good (used), functionality: fully functional, Digital Finishing System iTech AXXIS Bodpfxsyh Ukpe Af Uecw (Laminating, Cutting, and Roll Rewinding System) Contour cutting via vector cutting (plotter/drag knife) and SmartMark opto-electronic line sensor for mark detection Data transfer via HighSpeed USB or Ethernet Cutting accuracy: 0.25mm or 0.1% overall Cutting force: 10 to 550g Curve cutting Test cut function Pause and reset functions Front panel with keyboard operation Registration accuracy: 0.1mm Feed speed: 0 - 50mm/sec Cutting speed: 1,320mm/sec Maximum label length: 345mm Min./Max. roll width: 100mm / 210mm or 230mm Max. roll outer diameter: 275mm Software: Allen DirectCut (CorelDraw plug-in), USB cable included Machine dimensions: 790 x 990 x 640mm (L x W x H) Weight: approx. 90kg

Year of construction: 2007, condition: good (used), ABG OMEGA 330 Converter Year of manufacture: 2007 Maximum web width: 330 mm Maximum roll diameter: 1000 mm Maximum mechanical speed: up to 200 m/min Configuration and Equipment  1 rotary die-cutting unit Bcsdoydptmopfx Af Ujw  Waste rewinding system  Slitting unit  Rewind shafts for core sizes: 76 mm 40 mm 25 mm  5 magnetic cylinders included in the scope of supply This configuration enables immediate production of a wide range of blank label formats without any additional investment. Machine Condition – The machine is in good condition – Well maintained – Ready for production The Omega 330 has been handled with care and stands as a testament to the long service life and reliability characteristic of AB Graphics equipment. Why choose this ABG Omega 330? Investing in this machine means:  Proven AB Graphics technology with a strong worldwide reputation  High productivity with speeds up to 200 m/min  Flexibility for various label formats and core sizes  Immediate production readiness  A cost-effective alternative to new machinery, without compromising quality This is an ideal machine for converters looking to efficiently expand capacity or enter the blank label production sector with a reliable, established solution.

Year of construction: 2021, condition: good (used), CARTES CE 162 HH - Machine Series: CE160 - Year of Manufacture: 2021 - Serial Number: 216359 Technical Specifications Input and Unwinding Unit: - Integrated unwinder with web tension control - Overprinting photocell for precise register alignment Hot Foil Embossing Stations: - First station: Hot foil stamping unit with transverse foil feed - Second station: Hot foil stamping unit with transverse foil feed Cutting and Processing: - Ultrasonic cutting unit for resin-free textile labels - Maximum web width: 80 mm - Independent cutting mode enabling cuts after each print or every 2nd, 3rd, 4th, or 5th cycle Control and Operation: - Integrated silk screen printing unit (SN 161) - Touchscreen interface for intuitive machine control Drying and Accessories: - Infrared drying oven suitable for conventional and specialty screen printing inks - Overprinting photocell for register accuracy Bcjdpfx Aeycv Hkjf Uow Additional Equipment: - Longitudinal slitter with three adjustable pressure knives - Additional slitting units Why Choose This Machine? The CARTES CE 162 HH is a high-end hot foil embossing platform engineered for converters who require exceptional precision, reliability, and versatility. Thanks to its dual hot stamping stations, advanced register control, and robust CARTES build quality, it ensures outstanding foil application even at high production speeds. This machine is the premium solution for producing high-value labels in the wine, spirits, cosmetics, and pharmaceutical sectors.

Year of construction: 2013, condition: good (used), LINK LABEL ISH 330 Cross Cutter → Year of manufacture: 2013 This machine is designed for precise cross-cutting of both printed and unprinted materials and is particularly well-suited for short production runs, variable cut lengths, and processing transparent substrates. Technical Specifications Unwinding System → Integrated unwind unit → Loop control for stable web tension → Roll end sensor included Maximum Roll Diameter → 550 mm Maximum Web Width Bsdpfjycv Eysx Af Uocw → 330 mm Cutting Length → Variable, programmable via touch screen → Skip function included → Intermediate cut programmable from 0.10 mm to 50.00 mm Maximum Speed → Up to 500 cuts per minute Drive and Control → Computer-controlled drive system → Touch screen operation Material Handling → Suitable for transparent materials → Suitable for printed and unprinted materials → Optical sensor for register control Delivery System → Delivery conveyor for shingled output → Pulse separation system for reliable product separation Infeed and Web Control → Pneumatic pressure rollers → Web tension control via integrated vacuum system → Vacuum pump included Electrical and Air Requirements Power Supply → 220 V → 10 A Compressed Air → Minimum 6 bar Dimensions and Weight Overall Dimensions (L x W x H) → 1,980 x 900 x 1,038 mm Machine Weight → Approx. 250 kg Why This Machine? The ISH 330 Cross Cutter stands out with its high cutting precision, flexible length programming, and superior web control. Its optical register system and vacuum-controlled web tension ensure reliable, consistent results even at high speeds and when working with challenging substrates such as transparent films. With its compact footprint and intuitive touch screen operation, it is the ideal choice for efficient finishing in modern label production environments.

Year of construction: 2015, condition: good (used), Machine type: P 440 D Serial number: P122 0315 Year of manufacture: 2015 Maximum working width / format: – 17 inch (approx. 432 mm) Certification: – CE compliant Machine configuration: – Feeder / infeed unit – Two gluing stations, suitable for window and corner window patching Bjdpjycv Eaefx Af Uscw – Web guiding system with register and deflection units – Operator control panel – Delivery unit (stacking or winding configuration) Condition The machine is in very good technical condition. It was originally purchased as a backup unit and shows only minimal operating hours.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Impression count: 319,874 cycles. Min. format: 100 mm Max. format: 300 mm Printing on self-adhesive paper (40-220 g/m²) 4 IR lamps Hot stamping section. Exposure and developing device. Inspection possible. Documentation available. Disassembly is possible. Bedpfxsyb Szne Af Ujcw

Year of construction: 2012, condition: excellent (used), functionality: fully functional, For sale: SMAG E-CUT S 330, a robust, versatile, and high-productivity roll-to-roll label finishing system. Designed for digital and conventional printing lines seeking flexibility, precision, and premium value-added finishes. This equipment is ideal as a complement to digital presses, enabling lamination, die-cutting, slitting, and rewinding in a single workflow. Bedpfxjyapy Ee Af Uscw -> General data: - Model: E-CUT S 330 - Year of manufacture: August 2012 - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind roll diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and Units: - Unwinder with ultrasonic web guide - Fully rotating flexo station - Lamination unit - Semi-rotary die-cutting with Z 160 magnetic cylinder - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Longitudinal slitting unit with up to 10 knives - 2 rewinders - Matrix rewinder -> UV System: In 2017, an air-cooled Phoseon UV-LED lamp was installed, improving energy efficiency and reducing maintenance. -> Key strengths: - High industrial productivity and reliability - Great versatility for both digital and flexo jobs - Precise and stable die-cutting - Ready for a wide range of materials - Ideal for short to medium runs with quick job changeovers -> Equipment condition: - Machine in good working order, well-maintained and operational. - Available for inspection and testing without obligation. Reason for sale: Restructuring / change in production strategy.

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") Bcjdpfx Aox Ngflef Uow • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: good (used), Year of construction: 2014, • Manufacturer: PRISMA s.r.l. • Model / Machine Type: MS-330 • Year of Manufacture: 2014 • CE Certified _____ Technical Specifications General Data • Printing Technology: o Screen printing (flat-bed) o Hot foil stamping o Flat-bed die-cutting • Number of Colours: 4 screen printing units • Maximum Web Width: approx. 330 mm • Maximum Printing Width: approx. 320 mm (depending on screens & tooling) • Substrates: o Self-adhesive paper o Films (PP, PE, PET) o Special materials for industrial & decorative labels _____ Machine Configuration (as installed) Unwind Section Bjdpfex Hin Rjx Af Uocw • Motorized unwind unit • Adjustable web tension control • Suitable for roll-fed self-adhesive materials _____ Printing Units • 4 independent flat-bed screen printing stations • Precision mechanical register system • Individual print parameter adjustment per unit • Designed for high-opacity inks and special effects _____ Drying System • Intermediate drying between print stations • Hot-air / IR drying (as in line configuration) • Optimized airflow extraction via central exhaust system _____ Hot Foil Stamping • Integrated flat-bed hot foil stamping unit • Precise pressure and dwell-time control • Suitable for decorative and functional foil applications _____ Die-Cutting • Flat-bed die-cutting station • Suitable for complex label shapes and short repeats • Clean cutting performance on paper and filmic substrates _____ Rewind Section • Motorized rewind • Stable roll formation • Suitable for production and finishing rolls _____

Condition: good (used), Year of construction: 2010, SER.AI.PRINT Model: 330 Year of Manufacture: 2010 _____ Technical Specifications • Printing Technology: o 2-colour screen printing o Hot foil stamping o Flat-bed die-cutting • Maximum web width: approx. 330 mm • Printing width: up to 320 mm (depending on tooling) • Substrate range: o Paper o Self-adhesive materials o Films (PP, PE, PET, etc.) • Printing units: o 2 independent screen printing units o Servo-controlled register system • Hot foil unit: o Flat-bed hot foil stamping o Precise foil positioning and pressure control • Die-cutting: o Flat-bed die-cutting station o Suitable for labels and special shapes • Drying system: o Hot-air / IR drying (depending on configuration) • Unwind / Rewind: o Powered unwind and rewind o Adjustable web tension control • Control system: o Central operator panel o User-friendly machine control • Electrical specifications: o 400 V / 50 Hz / 3-phase (European standard) _____ Bsdpsx Hinwjfx Af Uocw Machine Condition • Well maintained • In good working order • Available for inspection by appointment _____

Condition: good (used), Year of construction: 2006, Main Features & Equipment • Unwinder with Web Guide Ensures precise alignment of the web material right from the beginning of the process. • Infeed Nip Unit Bjdpfxjx Hh Eue Af Uecw Provides stable and controlled web tension. • Feeder System Ensures smooth, continuous transport and feeding for uninterrupted production. • Lamination Tower Enables film lamination for surface protection or special finishing effects. • Flatbed Die-Cutting Unit Suitable for high-precision die-cutting applications. • Rotary Die-Cutting Unit Comes equipped with: o Re-register system (ideal for pre-printed webs) o Die load cells for optimized pressure control and enhanced cutting quality • Matrix Stripping Tower Facilitates efficient waste removal for continuous operation. • Outfeed Nip Roller Stabilizes web tension before rewinding. • Rewinder Produces finished rolls for shipping or further processing.

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Bedpfxex Hh A Ho Af Uecw Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: good (used), Year of construction: 2013, • Model: GM DC5V8-BXE • Year of Manufacture: 2013 • Web Width: 200 – 520 mm • Substrate Thickness: 20 – 200 microns • Machine Speed (Semi-Rotary): up to 55 m/min Unwind & Web Control • Unwind unit with max. 700 mm diameter • BST web guiding system with splice table • Touch screen control panel Printing & Surface Treatment • Servo-controlled flexographic printing unit Bcsdpfxjx Hab Ue Af Ujw • UV curing unit • Vetaphone corona treatment unit Finishing & Converting Modules • Laminating unit • Die-cutting unit, die plate size 50.8 – 520.7 mm • Magnetic cylinder: Z 200 • Semi-rotary die cutting • Slitting unit • Waste rewind up to 500 mm diameter • 2× rewind stations Integration • Pre-installed buffer system for Xeikon digital press (Ideal for inline or near-line workflow)

Year of construction: 2000, condition: good (used), KOPACK 250 SUPER 6-colour letterpress press with flexo varnishing unit, full UV configuration, flat-bed and rotary die-cutting. This machine is engineered for high-quality self-adhesive label production and provides a compact, efficient setup including UV printing, die-cutting, and web handling. Below you will find the complete technical specification and commercial terms. Testing and inspection at the installation site can be arranged upon request. Technical Specification General Information Manufacturer: KOPACK Model: 250 SUPER Printing technology: 6 × letterpress printing units 1 × flexo varnish/coating unit Applications: Labels, self-adhesive materials, paper and film substrates Web & Format Maximum web width: 250 mm Rewind/unwind diameter: up to 800 mm (CI drum) Core diameter: 76 mm (3”) Material types: paper, self-adhesive laminate, film substrates Bcjdpsx Ez Tvjfx Af Ujw Printing method: Complete UV curing system Register: Mechanically driven register system with gears Drying & Surface Treatment UV system: Full UV configuration Corona treater: Sherman Corona Treater installed (for improved ink and varnish adhesion on films) Web Handling Web guiding system: BST Web Guide Material transport with edge guiding and tension control Manual splicing table Printing & Finishing Units 6 × letterpress colour stations 1 × flexo varnish/coating unit Flat-bed die-cutting station Rotary die-cutting unit Integrated waste matrix removal and rewinding Electrical / Controls Central control panel Emergency stop system UV safety interlock protection Electrical documentation available (where present) Included Accessories Standard plate cylinders Die-cutting frames/rotary tools (as available) UV lamps with power supply units Web guide sensors and display panels

Condition: good (used), functionality: fully functional, • Model: Legi-Air LA404Z-LH-500-112 • Machine type: Automatic labeling and print & apply system • Typical application: Product, carton, and pallet labeling • Features: - Print and apply labels in a single step (Print & Apply) - Precise label positioning at high speeds - Variable label sizes and layouts Bedpfex Aid Ujx Af Uecw • Equipment: - High-performance print module (model-dependent: Zebra / Sato / Intermec) - Automatic applicator arm (LH 500–112 Series) - Sensor and safety technology • Benefits: - High reliability for 24/7 industrial operation - Fast label changeover - Compatible with ERP / production lines • Application areas: Logistics, packaging, food, pharmaceuticals, industry • Condition: Standard machine

Year of construction: 2011, condition: good (used), functionality: fully functional, • Model: Domino A400CP + Leibinger LKS 5 • Machine type: Industrial continuous inkjet printer (CIJ) with camera system • Year of manufacture: 2011 • Application: Marking, coding, and quality control • Features: - High-speed coding for packaging and products - Precise inkjet marking (date, batches, text, codes) - Integrated Leibinger LKS 5 camera system for code and print inspection • Areas of use: Food, pharmaceuticals, packaging, industrial production • Condition: Standard machine • Advantages: - Reliable print quality - Automatic fault detection system (camera) Bcsdsx Aib Tepfx Af Uow - Minimal downtime

Condition: good (used), Year of construction: 2019, DOMINO N610i | DIGITAL UV INKJET LABEL PRESS (up to 7 colors including high-opacity white) • High-resolution digital UV inkjet system for professional label production • Supports up to 7 colors (CMYK + White + White) • 600 dpi native resolution with 4 grey levels (nominal 1,340 dpi) • Print speeds up to 75 m/min • Wide range of compatible substrates: paper, PET, PP, PE • Designed for industrial, household, personal care, automotive, chemical, pharmaceutical, food, and beverage applications • Short setup times and consistent print quality • Durable Domino construction and global service support _____ 2. MACHINE DATA Specification Details Manufacturer DOMINO Model N610i Technology UV Inkjet Year of Manufacture September 2018 First Installation February 2019 Operating Hours 6,110 hrs (as of November 2025) Installed Colors CMYK + White + White (6 channels active) Print Resolution 600 dpi native incl. 4 grey levels (nominal 1,340 dpi) Printing Speed Up to 75 m/min Web Width Up to 340 mm Print Width Up to 333 mm Printheads 18 Kyocera Micro-Piezo printheads (4 replaced in 2025) Ink Type UV-curable inks Drying System Integrated UV curing units Substrate Compatibility Paper, PET, PP, PE Digital Front-End ESKO RIP Version 2.2 Unwind Unit Max. 1,000 mm Ø Rewind Unit Max. 1,000 mm Ø Machine Dimensions W 570 cm • D 200 cm • H 180 cm Ink Cabinet Dimensions W 120 cm • D 52 cm • H 81 cm Production Status Machine currently in operation Availability Estimated end of February 2026 _____ 3. INCLUDED COMPONENTS • Domino N610i print engine with 18 Kyocera Micro-Piezo printheads Bsdpfxsxzr Imo Af Uocw • UV curing system • Unwind unit (Ø 1,000 mm) • Rewind unit (Ø 1,000 mm) • Vetaphone corona treatment module • Web guiding module • Web cleaning system • Anti-static control system • Digital front-end with ESKO RIP v2.2 • Color management system • Remote diagnostics & support capabilities • Ink cabinet • Complete operator workstation • All components supplied in 'AS IS' running condition

Year of construction: 2007, condition: ready for operation (used), Offered is a Kocher + Beck rotary die cutter/rotary die cutting system, sheet die cutting machine approx. year 2007. Sheet format X/Y approx. 500mm/720mm, material thickness up to max. 0.5mm, die cutting width max. 540mm, unwind max. 732mm, axial adjustment of the magnetic cylinder: +/-7.5mm, machine dimensions X/Y/Z: approx. 2100mm/1150mm/1500mm, weight: approx. 450kg. Inspection possible by arrangement. Bcjdsxy R E Uepfx Af Uew

Year of construction: 2005, operating hours: 8,200 h, condition: used, functionality: fully functional, machine/vehicle number: 003685, Used DEMAK LCE SUPPAUT Resin Mixing & Dosing System – Complete with pallet truck – Export Ready * Year: 2005 | Origin: Italy (Turin) | Serial: 003685 * Type: MISC BIC (Bicomponent resin system) * Supports 2-component resins: epoxy, polyurethane, silicone * Two material tanks with agitators * High-precision automatic A+B dosing * Servo-driven distribution head & working table * Includes pallet truck Condition: Fully operational, very good condition Bcodjxywmlspfx Af Ujw Price: Negotiable – For export Shipping: Worldwide shipping available, ready for immediate delivery Keywords (for search): resin processing, epoxy machine, polyurethane, silicone, potting, encapsulation, electronics manufacturing, export industrial equipment

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Bedpexw Uqvsfx Af Ujcw Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Digital label finisher Valloy Duoblade WX I with four cutting heads. Machine used only for demonstration purposes. Main technical information: Media width: 100-350 mm. Bcsdjxv Adzepfx Af Uew Number of cutting heads: 4 units. Automatic selection and adjustment of heads according to the cutting file Cutting speed up to 9 m/min. Maximum label size: 350x600 mm. Cutting accuracy: +/-0.2 mm. Automatic web tension control with magnetic powder brake CCD camera for reading registration marks and job numbers Lamination system "Web guide" system Sheeter option