Uwe Zimmermann

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump Hnodpszux Rbofx Ah Eer 2 tool changers

Condition: ready for operation (used), functionality: fully functional, Equipment: foot remote control, Geka Hydrocrop Hydraulic Ironworker Model: 70 S Angle (90 Degrees):130 x 130 x 13mm Flat: 450 x 15mm Round: 45mm Square:45mm Hodpezux N Rjfx Ah Esnr Punching: 28 Dia Through 20mm Dimensions: 2000 x 1200 x 2000mm High Weight: 1800 Kgs

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00666, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2016.12. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2016.12 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Hnodezux N Djpfx Ah Ejr Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.12 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) Hsdpfxozux Nws Ah Eenr - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/1996, loading space length: 13,460 mm, loading space width: 2,430 mm, loading space height: 3,100 mm, total width: 2,570 mm, suspension: air, tire size: 245/70 R17.5, tire condition: 30 %, wheelbase: 9,490 mm, color: other, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 30% Hsdjzux Nqspfx Ah Eonr Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 7.040 kg Carrying capacity: 31.960 kg GVW: 39.000 kg Identification Registration number: OD-72-TR

Condition: used, Measuring instruments for measuring internal diameters – used bore measuring screw Internal micrometer – tube construction with interchangeable extensions, measuring head with extensions, internal measuring screw set in a case. Measuring screw, measuring range for internal dimension 200-225 mm, scale value 1/100. With extensions: 25 mm 50 mm 100 mm 200 mm 400 mm Price on request. All technical specifications are subject to printing errors and changes. Hedezux Nkjpfx Ah Eonr Sale exclusively to countries within the EU.

Condition: used, axle configuration: 3 axles, first registration: 07/2014, color: other, Year of construction: 2014, Please contact us for more information. Hnedpfozux Ndjx Ah Ejr

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 was manufactured in 2014. It features an installed power of 23.6 kW and operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm Hnsdpfx Aszux I Tjh Ejr • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2024, total length: 11,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,270 mm, color: other, Year of construction: 2024, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle Hnjdpfx Ahszux I Hj Ejr = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 5.160 kg Carrying capacity: 35.840 kg GVW: 41.000 kg Maintenance APK (MOT): tested until 10/2026 Identification Registration number: OV-38-KH

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Hedezux Iyspfx Ah Eenr Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: used, mileage: 391,403 km, power: 221 kW (300.48 HP), first registration: 04/2013, fuel type: diesel, tire size: 315/70, tire condition: 40 %, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2013, Tyre size: 315/70 Tyre profile: 40% Front axle: Steering Rear axle: Double wheels Hedszux Itspfx Ah Eonr

Condition: used, Year of construction: 2005, CNC machining center Manufacturer: Homag Type: PROFI BOF 722/58/18/F/K Year of manufacture: 2005 Technical data - Machining area: X = 6000 mm / Y = 1800 mm / Z = 380 mm from the suction cup - 5-axis swivel head (replaced in 2019) - Rear spindle with Flex5 unit Hnodpfx Ahozux Ime Eer - 2 traversing tool changers with 18 positions each - Computer with Windows 10 (new 1.5 years ago) - Woodwop 8.1 - 2nd vacuum pump, can be switched on/off separately

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 07/2001, total length: 13,840 mm, total width: 2,550 mm, suspension: air, tire size: 425/65, tire condition: 30 %, wheelbase: 9,870 mm, color: other, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles = More information = Axle configuration Tyre size: 425/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 10000 kg; Steering; Tyre profile: 30% Rear axle 2: Max. axle load: 10000 kg; Steering Rear axle 3: Max. axle load: 10000 kg; Steering Weights Empty weight: 8.380 kg Carrying capacity: 39.620 kg GVW: 48.000 kg Hnjdpfszux Igox Ah Eor Identification Registration number: OG-75-RX

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles Hnedpfx Ahezux Iae Ejr 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, axle configuration: 3 axles, first registration: 08/2016, suspension: air, tire size: 435/50R 19.5, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = Hnedpfx Aozux H Noh Ejr - Air Suspension - Disc brakes = More information = Axle configuration Tyre size: 435/50R 19.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.106 kg Carrying capacity: 32.894 kg GVW: 39.000 kg

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F Hedpfx Ahszux H As Eenr - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. Hjdpfxezux Hcs Ah Ejnr The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 08/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods Hnodpfx Ahezux E Se Ejr FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 7 mm Front right - 8 mm Middle left - 7 mm Middle right - 7 mm Rear left - 7 mm Rear right - 8 mm

Condition: used, Year of construction: 2013, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 9.000 1/min Spindle power: 65/54 kW max. torque on the spindle: 575/470 Nm tool taper: HSK-A 100 tool change unit: 60 Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 700 kg weight of the machine ca.: 23 t dimensions of the machine ca.: 3,8 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture Hedpfszux E Ejx Ah Esnr coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis KOMET Komtronic U-axis system with two heads: 1. UAS 160-HSK100-E-Z50-1 with 50 mm travel 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm travel. *

Condition: used, Ampere Rack Armour® shelf support protector, size M. Condition: used, good condition Manufacturer: Ampere System Product: Rack Armour® Size: M Suitable shelf support width: 88–100 mm Height: 600 mm Outer shell material: HDPE (high-density polyethylene), wall thickness > 7 mm Inner material: Highly flexible energy-absorbing foam Weight: approx. 1.2 kg Color: signal yellow Impact absorption: frontal impact up to 2.4 t Assembly: can be done without tools (assembly aid recommended), no floor fastening required Hnjdpfxezux Exs Ah Esr Availability: we have several in stock, please inquire about the desired quantity! Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guardrails Grating Back wall grating Depth stops Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with competent and personal advice as your experienced specialist dealer for new and used shelving systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net, ex warehouse. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change. Items are subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. For new goods, the respective manufacturer's guarantees apply.

Condition: used, mileage: 597,614 km, power: 340 kW (462.27 HP), first registration: 12/2008, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,100 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 8,600 mm, total width: 2,500 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2008, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle 1: Max. axle load: 9000 kg Front axle 2: Max. axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Max. axle load: 11500 kg Hsdpfozux Erex Ah Eenr Weights Empty weight: 14.160 kg Carrying capacity: 27.020 kg GVW: 41.000 kg Max. towing weight: 50.000 kg Maintenance APK (MOT): tested until 09/2026 Identification Registration number: BV-RF-67

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Hedpfx Ahozux Els Eonr Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, functionality: fully functional, mileage: 247,738 km, power: 172 kW (233.85 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 6,440 kg, maximum load weight: 5,475 kg, overall weight: 11,990 kg, tire size: 245/70 R 17.5, axle configuration: 2 axles, wheelbase: 5,400 mm, next inspection (TÜV): 07/2027, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 46 m³, loading space length: 7,500 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, Year of construction: 2017, operation weight: 11,990 kg, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, electric window regulation, hill-start assist, onboard computer, power assisted steering, power mirror, soot filter, spoiler, tachograph, tail-lift, traction control, DAF LF 230 FA – 4X2 – EURO 6 – BODY AND TAILGATE FIRST REGISTRATION: 04/24/2017 247,738 KMS ENGINE: 6 CYLINDERS – PX-7 – 234 HP EURO 6 STANDARDS AD BLUE PARTICULATE FILTER SHORT CAB WHEELBASE: 5.0 MM AIR SUSPENSION (REAR) RAISE/LOWER VALVE ABS – EBS – TRACTION CONTROL – AEBS – LANE DEPARTURE WARNING – HILL START ASSIST ZF AS-TRONIC 6-SPEED AUTOMATIC GEARBOX ENGINE BRAKE CRUISE CONTROL MULTIFUNCTION STEERING WHEEL Hjdpszux Efofx Ah Esnr ON-BOARD COMPUTER AIR CONDITIONING POWER WINDOWS AND MIRRORS CENTRAL LOCKING ROOF SPOILER POLYFON BODY: 7.500 X 2.460 X 2.300 MM SIDE DOOR REAR CURTAIN FOLDING TAILGATE LIFT: DHOLLANDIA TYPE DHRC.15, CAPACITY 1,500 KGS TIRES: 245/70 R 17.5 GVW: 6,440 KGS GVM: 11,990 KGS PAYLOAD: 5,475 KGS

Condition: used, Year of construction: 2001, Year: 2001 Condition: good Technical specification: - Number of spindles: 1 - Drill hole diameter: 2–9 mm - Distance from the edge of the paper to the hole: 28 mm - Vertical spindle movement: lever-operated - Maximum paper stack height: 50 mm - Machine dimensions (H × W × D): 65 × 70 × 53 cm - Power consumption: 0.2 kW - Working table width: 450 mm - Drill rotation speed: constant - Weight: 48 kg - Voltage / frequency: 230 V / 50 Hz The CITOBORMA 111 paper drill is the best-selling paper drilling machine in the Nagel range. It is used not only in bookbinding and printing companies, but also wherever a manual hole punch is no longer sufficient, such as in banks, offices and larger companies. The Citoborma 111 quickly, easily and safely drills paper stacks of up to 50 mm. The machine requires minimal physical effort to operate and can be used by virtually anyone. For standard office applications, the manufacturer has preset the following hole spacing configurations: - 2 to 4 holes: 80 / 80 / 80 mm - 4 holes: 45 / 65 / 45 mm - 3 holes: 108 / 108 mm Hnedpezux D Usfx Ah Eer - 6 holes: 19 / 19 / 50 / 19 / 19 mm

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: Hnsdpfxozux D Ie Ah Eor min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)