Mark Scheuerle GmbH

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, This machine is in excellent technical condition and is available immediately. Tools and a vise are not included in the scope of delivery. Technical specifications are attached in PDF format. Lhjdpfx Aozgv N Som Tjh The following options have been retrofitted: CMP 60 measuring probe Handwheel Engraving function

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating hours: 15,950 h, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Lsdpfszgu Utsx Am Tshh Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation - 3D measuring probe - Belt filter system with IKZ 20 bar - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 Ledpfxezguh He Am Tohh milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Ljdpfx Aszguhysm Tehh Spindle cooler

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Coolant system Lighting Guarding Ljdpfx Aozguf Sjm Tshh

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Ljdpezf Iqrefx Am Tjhh Technical Specification Taper Size BT 40

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, Work area Ledozf Hupepfx Am Tshh Travel range X: 1,000 mm Travel range Y: 550 mm Travel range Z: 500 mm Clamping area (L x W): 1,100 x 502 Table load: 700 kg Spindle Speed: 12,000 rpm Power: 20.9 kW (25% duty cycle) Torque: 178 Nm (25% duty cycle) Tool holder: BBT 40 (conversion to SK 40 possible) General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite casting Rapid traverse rate: 36 / 36 / 30 m/min Equipment Chip management: Chip conveyor incl. chip flushing in the work area Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Temperature management: Cooling unit for spindle oil Run-in assistance: Electronic handwheel Network connection: Ethernet interface 4th axis: PLC-side preparation Conversion kit to SK 40: Included

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller model: Okuma OSP-P300MA-e, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, Travel X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Distance from table surface to spindle nose: 150 – 610 mm Distance from column front to spindle center: 720 mm Table Dimensions: 560 x 1,300 mm Working area: 560 x 1,300 mm Table surface: 4 T-slots (width: 18 mm, pitch: 125 mm) Distance from table surface to floor: 800 mm Max. table load: 900 kg Spindle (Cabezal) Spindle speed: 50 – 15,000 rpm Speed ranges: Two ranges, infinitely variable speed Motor: 22 / 18.5 kW (10 min / continuous rating), VAC type Lhedpfx Aozf A R Hom Toh Torque: 199 N·m Spindle taper: 7/24 taper, No. 40 Spindle bearing inner diameter: 70 mm Feedrates (Avances) Rapid traverse rate (X, Y axes): 40,000 mm/min Rapid traverse rate (Z axis): 32,000 mm/min Cutting feedrate (X, Y, Z axes): 1 – 32,000 mm/min Automatic Tool Changer - ATC Changer type: Twin-arm type (Double-arm) Tool shank: MAS BT40 Retention knob (Pull stud): MAS Type 2 Magazine capacity: 32 tools, random memory Max. tool diameter (adjacent): Ø 90 mm Max. tool diameter (without adjacent tools): Ø 125 mm Max. tool length: 300 mm Max. tool weight: 8 kgf Dimensions and Weights Machine height: 2,750 mm Floor space (Footprint): 2,470 x 3.105 mm Machine weight: 7,500 kgIncluded Options Chip conveyor: MAYFRAN MT 10 (Rear side discharge) Coolant through spindle - CTS: (15 bar, 20 L/min) Workpiece measurement probe: RENISHAW Tool length measurement and breakage detection probe: RENISHAW Tool Life Management function Helical cutting function Rigid tapping DNC-T1

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control system with ShopMill Travel ranges X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Lsdpfx Amozfx Uus Tohh Internal coolant system Chip conveyor Measuring probe

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Lodpfx Aszfx T Djm Tohh Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details. Additional equipment Lsdpfszfqacex Am Tohh • Chip conveyor Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, controller manufacturer: HEIDENHAIN, controller model: 530, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 x 530 mm and a spindle speed of 10,000 rpm, making it suitable for various machining tasks. The machine includes a paper belt filter and optional chip conveyor. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Machine currently not funcional. Contact us for further details. Defect: Heidenhain UE241 inverter defective Lsdpfx Amjzfgpgj Tshh • Approx. 7,000 spindle hours • Paper Belt Filter • Chip Conveyor • Tool Taper: SK40 • Internal Cooling • Rated Power: 25 kVA • Fuse Protection: 35 A • Voltage: 400 V / 50 Hz / 3 PhMachine currently not funcional

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Input voltage: 400 V Lhjdpfszd Aigex Am Tjh Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: excellent (used), Spinner MVC 1100 + 4th/5th axis indexing head Year of manufacture: 2005 Control system: - Fanuc control Travel ranges: - X - 1100, Y - 610, Z - 610 mm Spindle: - Tool holder: SK40 - Speed range: max. 8000 rpm Table design: - Clamping surface: 1200 x 600 mm Lhedpfx Amszd Ad Dj Toh - Max. table load: 1000 kg Tool magazine: - Tool changer: 24 magazine positions Additional options: - Chip conveyor - Coolant through spindle (CTS) - Documentation Delivery time: - Immediately available Info: - New spindle in X-Y-Z - New main spindle bearings in 2025 - 4th axis indexing head

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, table load: 300 kg, overall weight: 3,300 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 10,100 W, number of slots in tool magazine: 14, tool weight: 3,000 g, number of axes: 3, This 3-axis Brother S1000X1 was manufactured in 2018. It features impressive travels of 1,000 mm in the X-axis, 500 mm in the Y-axis, and mm in the Z-axis. The machine includes a robust table size of 1,100 x 500 mm and a maximum table load capacity of kg. If you are looking to get high-quality machining capabilities, consider the Brother S1000X1 vertical machining centre we have for sale. Contact us for further details. • Control: Brother CNC C00, 12.1" color LCD • Table: 1,100 x 500 mm; height from floor 810 mm • Spindle: distance nose-to-table 180–480 mm; tool holder MAS BT30; pull stud MAS P30T-1 • Feed rates: Rapid (X/Y/Z) 50 / 50 / 56 m/min; cutting 1–30 m/min; acceleration (X/Y/Z) 2 / 1.3 / 2.2 G • ATC: 14 tools (optional 21); max tool Ø110 mm; max length 250 mm; tool-to-tool 0.8 s; chip-to-chip 1.4 s • Accuracy: Positioning mm; repeatability ±0.004 mm • Electrical/Air: AC 380 V, 3-phase; air 0.4–0.6 MPa • Standard features: Through-spindle coolant; rigid tapping; helical interpolation; conical interpolation; tool life management; automatic tool wear compensation; High Precision Mode BI (30-block look-ahead); High Precision Mode AIII; automatic power-off; program memory 100 MB Lhodpfx Aszdz T Rom Toh Technical Specification Taper Size BT 30

Condition: good (used), Year of construction: 2009, functionality: fully functional, 3 x Hyundai-Kia / WIA VX500 CNC Vertical Machining Centers A total of 3 identically equipped Hyundai-Kia / WIA VX500 CNC vertical machining centers are for sale. All three machines are located next to each other at the same site and are identically equipped, each including a mounted 4th axis / NC rotary table on the machine table. Manufacturer: Hyundai-Kia Machine / WIA Corporation Model: VX500 / VX500 F21i-MB Machine Type: CNC Vertical Machining Center Control: FANUC Series 21i-MB Number of Machines: 3 units Year of Manufacture: 2007 & 2009 Tool Clamping: BT40 / NT40 Tool Magazine: 30-position 4th Axis: Yes, each mounted Machine Weight: approx. 7,000 - 7,500 kg per machine Technical Data per Machine Travel X-axis: 1,060 mm Travel Y-axis: 510 mm Travel Z-axis: 635 mm Table Size: 1,200 x 500 mm Max. Table Load: 800 kg Spindle Speed: 80 - 8,000 rpm Optional / possible according to documentation: up to 10,000 rpm Spindle Power: 15 / 11 kW Spindle Clamping: BT40 / NT40 Rapid Traverse X/Y: 36 m/min Rapid Traverse Z: 30 m/min Lhodpfszdv R Rjx Am Teh Working Feed: 1 - 15,000 mm/min Smallest Input Unit: 0.001 mm Positioning Accuracy according to documentation: ±5 µm over full travel Repeatability Accuracy according to documentation: ±2 µm Tool Changer Automatic Tool Changer Tool Magazine: 30 positions Tool Call: Random Max. Tool Diameter: 90 mm Max. Tool Length: 300 mm Max. Tool Weight: 8 kg Tool Change Time Tool-to-Tool: approx. 3 seconds Chip-to-Chip Time: approx. 7 seconds Equipment per Machine FANUC Series 21i-MB CNC Control 4th Axis / NC Rotary Table, mounted Automatic Tool Changer 30-position Tool Magazine BT40 / NT40 Tool Clamping Coolant System Spindle Cooling / Main Shaft Cooling Unit AR Filtrazioni Oil Mist Extractor / Filtration System Full Protective Enclosure Work Area Lighting Electronic Handwheel / MPG Load Meter Spindle Override Feed Override Feedrate Override Chip Conveyor Function on Control Panel Automatic Door Function on Control Panel Tool Holders visible in the Magazine Clamping Devices / Vise or Fixture visible in the Work Area Description The machines are suitable for general CNC milling operations, toolmaking, jig and fixture manufacturing, single-part production, small-batch production, and precise machining operations. Due to the mounted 4th axis, the machines are suitable not only for conventional 3-axis milling but also for 3+1 machining. All three machines are located next to each other and can be offered together as a package or, if necessary, individually.

Condition: used, Year of construction: 2007, x-travel . mm y-travel . mm z-travel . mm control SIemens type Shopmill 840 D Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Lsdpfx Aozdu Ubem Tshh please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, x-travel . mm y-travel . mm z-travel . mm control SIemens type 840 D ECOLINE Shopmill Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Lhedjzdu Tdspfx Am Teh Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2015, Dugard CY2 – 52MB Twin Spindle Double Y Axis CNC Lathe S/No. CY2040502 (2015) with Mitsubishi M700 CNC Control, Double Y Axis Twin Turret Machine with Main and Sub Spindle, A Axis Contouring Capability, Max Bar Size 52mm, Spindle Speed Max 6000rpm, Spindle Collet Size TRB-52, Travels X1 – 210mm, Y1 – 460mm, Z1 – 250mm, X2 – 480mm, Y2 – 460mm, Z2 – 270mm, 48 Tool Total,12 Tool Driven on Main Spindle, 3 Tool Driven on 2nd Spindle, Orion Spindle Oil Chiller Unit, Smartec DS1404 High Pressure Coolant System, LNS Fox WS500 Oil Mist Filter Extractor, 3m Barload Automatic Bar Feeder Type MOG. S/No. 25130103 (2013), Machine Size: 3.4 x 2.15 x 2.1m, Machine Weight: 6000kg Lsdpfx Aozdtfrem Tshh Location: These lots are located in Ashford, Kent, Birmingham & Burton on Trent, UK. Please see individual lot for dismantling and loading charges.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine with only 3,275 spindle hours! Lhjdjzdkgajpfx Am Toh TECHNICAL DETAILS Travel in X-axis: 1,100 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 1,000 kg, total height: 3,355 mm, table width: 700 mm, table length: 1,350 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5 h, coolant supply: 20 bar, distance table center to spindle nose: 130 mm, number of slots in tool magazine: 40, tool length: 250 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Equipment of the Axon VMC 1270 Siemens 828D control unit Travel range X/Y/Z – 1,200/700/700 mm 12,000 rpm direct drive spindle 40-position chain magazine with dual-arm gripper Heidenhain glass scales in X/Y/Z IKZ 20 bar (internal cooling system) Chip conveyor Air cooling, internal/external Automatic workpiece measurement system Renishaw OMP 40 Chip flushing system Lhsdpfozddy Iox Am Tsh Coolant spray gun Handwheel Compressed air gun Status LED in the machine housing

Condition: used, Year of construction: 2004, x-travel 1040 mm y-travel 600 mm z-travel 500 mm feed 30 m/min control Siemens type 840 D table surface area 1250x600 mm table load 800 kg Lhsdpfx Ajzdcb Rom Tsh Tool changer 30 Fach spindle taper ISO SK 40 turning speeds 12000 U/min total power requirement 24 kvA weight of the machine ca. 8,8 t dimensions of the machine ca. . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 560 mm z-travel 510 mm feed 36 m/min control Siemens type Shopmill 840 D table surface area 800x500 mm workpiece weight 600 kg Tool changer 30 spindle taper ISO SK40 turning speeds 12000 U/min Lhodpfx Amozdcbde Tjh weight of the machine ca. 5 t dimensions of the machine ca. 4000x5000x3000 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, x-travel 1050 mm y-travel 510 mm z-travel 560 mm control Matzatrol type M Plus table surface area 1300x550 mm 1,5 t workpiece weight max. 1500 kg Tool changer . turning speeds . U/min weight of the machine ca. 8,9 t dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Lhedpfx Aozdca Tjm Tjh apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2019, operating hours: 6,617 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, operating hours of spindle: 4,373 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE (Minimum Quantity Lubrication) Ljdpfx Amszc Ni Se Tshh • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-Speed Machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,373 hours of cutting time (Spindle On Time) • 6,617 hours of cycle time