Fräs- und Drehmaschinen Zubehör Rainer Mörz und Holger Hagen GbR

Condition: ready for operation (used), controller manufacturer: Fanuc, Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. Kdedpfx Absxppngjrou spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Number of axes: 6 Toolchanger: yes Number of rotations: 500 - 20 000 rpm Power principal motor: 5 kW

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe Kjdpfexpil Sjx Abrsdu

Condition: ready for operation (used), travel distance Z-axis: 820 mm, feed length X-axis: 2,060 mm, feed length Y-axis: 1,016 mm, nominal power (apparent): 46 kVA, controller manufacturer: Meldas 500, total height: 3,200 mm, total length: 5,600 mm, total width: 3,750 mm, empty load weight: 23,000 kg, Hartford HV-80S X: 2060 - Y: 1016 - Z: 820 mm CNC Kdedpexpghdjfx Abreu Table dimensions: 2100 x 1050 mm Depth of throat (uprights-spindlecenter): 1050 mm Admission in spindle (ISO): BT 50 Power on the spindle: 18/14 kW Toolchanger: yes Number of toolholders: 20 positions Number of rotations: 40 > 3000 rpm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 20, control type: CNC control, number of axes: 3, For sale is our used but maintained and good condition Deckel Maho DMC635 machining center due to machine park upgrade. The machine is available for inspection and can be put into production immediately. The milling machine has mainly been used in single-shift, small batch production. Upon request, it can be sold with 20 tool holders and a vise. Year of manufacture: 2008 Operating hours: 17,641 h Control: Sinumerik 840D Table clamping area: 790 x 560 mm X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Kedpfx Aexl Ubdebrodu Spindle speed: 0 - 10,000 rpm Number of controlled axes: 3 Through-spindle cooling: no Spindle taper: SK40 Tool changer: yes Tool magazine capacity: 20 Rapid traverse: 30 m/min Dimensions (L×W×H): 3300x2905x2705 mm

Condition: used, Year of construction: 2021, X Axis 24.0 in (610 mm) Y Axis 16.0 in (406 mm) Z Axis 16.0 in (406 mm) 10+1 pallet pool, UMC Max Speed 15,000 rpm Taper BT40 Magazine Capacity 50+1 Programmable coolant nozzle Air through spindle Coolant through spindle Renishaw probe WIFI camera Extra coolant filter B Axis – Tilt (S.A.E / Metric) Travel 120° to -35° Max Torque 1854 ft-lbf (2514 Nm) Brake Torque 900 ft-lbf (1220 Nm) Ksdpfexl D Ersx Abrodu C Axis – Rotation (S.A.E / Metric) Travel 360° / 360° Max Torque 1854 ft-lbf (2514 Nm) Max Part Swing 18.0 in (457 mm) Brake Torque 900 ft-lbf (1220 Nm) Platter Diameter 15.70 in (400 mm) Max Weight on Platter 500 lb (226.8 kg) Max Weight on Platter w/Pallet Pool 200 lb (90.7 kg) T-Slot Width 0.626 in to 0.630 in (15.90 mm to 16.00 mm) Number of Std T-Slots 5 T-Slot Center Distance 2.48 in (63 mm) Max Tool Diameter (full) 2.5 in (64 mm) Max Tool Diameter (adjacent empty) 5.0 in (127 mm) Max Tool Length (from gauge line) 12 in (305 mm) Max Tool Weight 12 lb (5.4 kg) Coolant Capacity 55 gal (208 L)

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend kruiskopbewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen variërend van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. Kedpfx Asxlu T Hsbrodu - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 22 Nm - Gereedschapswisselaar met 150 posities Opties die op deze machine zijn gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge druk koeling (40 tot 70 bar) door spindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapsintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van daaruit profiteert hij, via het gietijzeren portaal, van alle trillingsdempende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt thermische inertie en is jarenlang bestand tegen bewerkingen, wat resulteert in zeer nauwkeurige en stijve reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Admission in spindle (ISO): HSK-A63 Power on the spindle: 40 kW Number of axes: 5 simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Kdsdpfsxlf D Nex Abreu Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: good (used), Year of construction: 2006, 5-axis simultaneous. X-1016 mm Y-508 mm Z-635 mm Distance spindle nose – machine table (~ max.) 742 mm (29.2 in) Spindle nose to table (~ min.) 107 mm (4.2 in) Kdodsxk Uzujpfx Abrou

Condition: ready for operation (used), travel distance Z-axis: 508 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 760 mm, controller manufacturer: Mazatrol M2, total height: 2,990 mm, total length: 3,105 mm, Mazak VQC 30/50B X:1500 - Y:760 - Z:508 mm Table dimensions: 1600 x 800 x 500 mm Ksdpfx Abjxgv Syerjdu Max weight on the table: 1500 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 11 kW Toolchanger: 24 positions Number of rotations: 30 -> 3150 rpm

Condition: excellent (used), Year of construction: 2014, High-Performance Machining Center Spinner VC1200-HS / Siemens 840-SolutionLine Technology: In-line direct drive, spindle speed 12,000 rpm, power 28 kW, torque 178 Nm, tool holder SK40. Kdedjxcwgwspfx Abrju Equipped with Siemens 840D Solutionline control system and 15" color screen, featuring a graphical user interface for shop floor programming (Siemens "ShopMill") and software version "Operate". Milling spindle up to 12,000 rpm with in-line direct drive. Travel distances: X-1200 mm, Y-730 mm, Z-650 mm; rapid traverse 48 m/min. Tool taper size 40 according to DIN 69871-A, drawbar bolt according to DIN 69872-A. General Features: - Air blast system for spindle taper - High-speed automatic tool changer with dual-arm changer for 32 tools - Linear guides on all three axes - Full enclosure with splash guard and work area lighting Technology: In-line direct drive, spindle speed 12,000 rpm, power 28 kW, torque 178 Nm, tool holder SK40 Tool magazine: 32 tool positions, dual-arm changer. Clamping surface 1,400 x 710 mm. Maximum table load 1,000 kg. Rapid traverse X/Y/Z 48 m/min. Chip management: scraper belt chip conveyor. Coolant supply: internal coolant supply (IKZ system) with filter, 22 bar, and additional 350-liter tank. Direct position measuring system in X/Y/Z (glass scales). Workpiece measurement with probe, BLUM TC52. Tool magazine: dual-arm tool changer for 32 tools. Pneumatics: compressed air connection at the spindle head. Control options: Siemens MyDynamics, 5-axis milling package.

Condition: excellent (used), Year of construction: 2015, High-Performance Machining Center Spinner VC1200-HS / Siemens 840 SolutionLine Technology: In-line direct drive Spindle speed: 12,000 rpm Power: 28 kW Torque: 178 Nm Tool holder: SK 40 General: - Equipped with Siemens 840DE-SolutionLine control system and 15" color screen - Features graphical user interface for shop-floor programming (Siemens "Shop-Mill") and software version "Operate" - Milling spindle up to 12,000 rpm with in-line direct drive - Travels: X-1200 mm, Y-730 mm, Z-650 mm - Rapid traverse: 48 m/min - Tool taper size 40 according to DIN 69871-A, pull studs according to DIN 69872-A - Air blast unit for spindle taper - High-speed automatic tool changer (double-arm) for 32 tools Tool Magazine: - 32 magazine positions, double-arm tool changer - Clamping surface: 1,400 x 710 mm - Max. table load: 1,000 kg - Rapid traverse in X/Y/Z: 48 m/min - Linear guides in all 3 axes - Full enclosure with work area lighting - 4th axis with Siemens motor and direct measuring system (Heidenhain encoder) Further Equipment: - Chip disposal via scraper belt chip conveyor - Coolant supply with internal coolant system (IKZ), filter, 22 bar, and additional 350-liter tank Kedpfxsxcwf Hs Abrsdu - Direct path measuring systems in X/Y/Z (glass scales) - Workpiece measurement with touch probe, BLUM TC52 - Tool magazine: double-arm tool changer, 32 tools - Compressed air: connection at the spindle head - Control options: Siemens MyDynamics, milling package, 4 axes - 4th-axis rotary table MRNC-320N with Siemens motor and direct measuring system (Heidenhain encoder) - Tailstock NTTS-320, height-adjustable for rotary table

Condition: good (used), Year of construction: 2006, A Heidenhain iTNC530 system is installed. Kodpoxbzrnefx Abrjdu Axes: X 3000 mm, Y 900 mm, Z 900 mm Table: 3000 x 900 mm Table load: 6000 kg Working speed: 3000 rpm Rapid traverse: 20000 mm/min Tools: 24 Motor: 22/27 kW Milling head – semi-automatic (see photo) Indexing range: A-2.5° B-2.5° The machine is not equipped with through-spindle coolant supply.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 30 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 2500 x 950 x 850 [mm] - Rapid traverses rates (X/Y/Z) : 16 / 16 / 16 [m/min] TOOL CHANGER Kdodpfxjxbh S Uj Abrsu - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 2500 x 950 [mm] - Maximum weight upon table : 3500 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 54.2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 6.480 x 4.315 [mm] - Machine height : 3.595 [mm] - Machine weight : 23.000 [kg] MACHINE HOURS - Number of working hours : 5.190 [h] EQUIPMENT - CNC : Fanuc i Series - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump - Spindle cooling unit - Chips conveyor - Tool probe - Workpiece probe : Renishaw - Oil mist extractor - Electric transformer

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Kedpoxadmrefx Abrjdu Toolchanger: yes Number of toolholders: 30 positions

Condition: good (used), Year of construction: 2009, Technical details shown on picture. Machine is in good working condition. Kjdpfx Abjw Ut I Aoredu 4.axis. Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1222021152, travel distance X-axis: 3,500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, Rational machining of aluminum, plastic and steel profiles 3-axis control - Working length 3500 mm Continuous clamping area allowing for clamping of profiles up to 7 meters long with roller conveyor support. - Simple graphic operator guidance. - Automatic control of clamping position. - Automatic measurement of profile length - 1-circuit clamping system. - Continuous bed surface. - Complete machining of profiles that are in a stationary state prevents damage to the profiles. - Fast positioning of the machining unit (up to 50 m/min.) in the x-axis ensures a robust drive with minimal wear - Highly dynamic servo drives with measuring device and digital servo controller. - Electronic 3-axis industrial PC control, color screen and floppy disk drive for online connection, barcode scanner. Network connection R3 45 10/100 Mbit - Machine number: 1222021152, year of manufacture 2007 Machining length: standard 3500 mm Milling range X-axis: 3500 mm without end face machining Milling range Y-axis: 350 mm Kdjdpfxsw Tm Rhs Abrju Milling range Z-axis: 280 mm Rapid traverse Y-Z: max. 30 m/min. Rapid traverse X-axis: max. 50 m/min. Positioning accuracy: +/- 0.1 mm Milling speed: 1 – 21000 1/min. Milling power: 6.0 kW S6 Tool changer We can offer professional assembly and operator training

Condition: good (used), Year of construction: 2004, Model: COMET ISOLA ES381 V06 Year: 2004 Control: ISAC ‘X’ axis Stroke: 7280mm ‘Y’ axis Stroke: 525mm ‘Z’ axis Stroke: 380mm Kjdpfjw Rfy Nex Abrodu Spindle Taper: ISO 40 Spindle Speeds: 24,000 RPM

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M-44206402122CFA, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hurco VMX 42, year 2002 X travel: 1060 mm Y travel: 610 mm Kedpfx Abjw Nirterodu Z travel: 610 mm Control: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: drum type, 24 positions Feed rate XYZ: 3 – 7,000 mm/min Rapid traverse XY: 30 m/min Rapid traverse Z: 20 m/min Table size: 1220 x 510 mm Table load capacity: 1.1 t

Condition: good (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 200 mm, workpiece weight (max.): 250 kg, table width: 420 mm, table length: 750 mm, For sale is a Heckler & Koch CNC machining center, model BA20, from the year 1984. The machine was only used for prototype production and comes with a tooling package for thread cutting and milling. CNC control system HKCNC781-2, 4-axis control via dialog input, also operable with externally created programs. Pneumatic rotary indexing table. Footprint (L x W x H): 235 x 235 x 300 cm. Machine weight: 3500 kg, accuracy: +/- 0.01 mm, automatic tool changer with a 7-second tool change time. The machine can be tested under power and inspected prior to purchase. Loading via overhead crane is possible; transport arranged by agreement. Ksdsw Euypepfx Abrjdu

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 12010, Hartford model BLOCKBUSTER PRO-4210-S travelling table, double column CNC vertical machining centre. With Fanuc 18iMB control Heavy Cast Iron Construction Heavy Duty Hardened & Ground Solid Slideways Table Traverse (X) - 4,050 mm Cross Traverse (Y) - 2,100 mm Ram Traverse (Z) - 780 mm Table Area - 4150 x 2040 mm Rapid Traverse Rates (X,Y,Z) - 12,000 mm/min Full Splash Guarding System Coolant System Electrical Cabinet Ventilation System Spindle Oil Cooler Twin Screw Type Swarf Augers, Link Type Chip Conveyor & Chip Bucket Auto Power Off Remote MPG Full Splash Guard (CE) Link Type Chip Conveyor & Bucket Coolant System Auto Power Off Centralized Auto Lubrication Remote Manual Pulse Generator Spindle Oil Cooler Kdsdpfjw Dd D Ujx Abrou 3 Axis Absolute Encoders Oil/Coolant Separation System Rigid Tapping Work Lamp Levelling Blocks & Bolts Spindle Air Blast Handbooks & Electrical Drawings Operation Finish Lamp Foot Switch for Tool Clamp/Unclamp Drum/Rack Type ATC RS-232 Interface Screw Type Swarf Augers 4th Axis Preparation Rotary Table - Golden Sun CNCB631RV 4th axis rotary table with Hydraulic clamping and with 25” chuck, 10” bore size and Spindle Tailstock with 10” bore and 25” 3 Jaw Chuck. Spindle nose taper to DIN 69871 X TRAVEL 4050 mm Y TRAVEL 2100 mm Z TRAVEL 780 mm DISTANCE OF SPINDLE NOSE TO TABLE 225 - 1005 mm WIDTH BETWEEN COLUMNS 2300 mm TABLE WORKING SURFACE 4150 x 2040 mm MAX. TABLE LOAD 10000 Kgs SPINDLE DRIVE MOTOR (FANUC) 26 Kw MAX. SPINDLE SPEED (GEARSHIFT) 6000 Rpm SPINDLE NOSE TAPER BT50 CUTTING FEEDRATE (X/Y/Z) 7000 mm/min RAPID TRAVERSE RATE 12,000 mm/min AXIS DRIVE MOTORS (X/Y/X – FANUC) 9.0 / 7.0 / 4.0 Kw DRUM/RACK TYPE TOOLCHANGER 20 Stations MAX. TOOL WEIGHT 15 Kgs MAX. TOOL DIMENSIONS 125 Dia x 350 mm MACHINE WEIGHT 35,500 Kgs FLOOR SPACE 11500 x 6050 mm

Condition: excellent (used), Year of construction: 2007, For sale: Haas Super Mini Mill machining center in very good technical condition. The machine was manufactured in 2007. Inspection and testing are possible. Kdsdpsw A Azpsfx Abrju

Condition: used, Year of construction: 2014, 2014 built Hurco VM30i with single MAX screen Hurco Control. Note: Photographed on Site...more pictures to follow when the machines arrive in Bristol. Fitted with Max control, 10,000 RPM BT40 spindle. In super condition given their age! . Specification: X Axis stroke mm 1.270 Y Axis travel mm 510 Z Axis stroke mm 510 Spindle nose to table surface mm 100-610 T slot (WxDxN) mm 5x18 Working table area (LxW) mm 1.320x510 Spindle Speed rpm 10.000 Main motor kw 15 Motor torque Nm 102 X/Y/Z Axis cutting feedrate mm/min 24/ 24/ 24 Pull stud SK40 Tool storage capacity pc 20 Max. Tool Diameter mm 89 Max. Tool Length mm 250 Max. Tool Weight Kg 7 Machine weight Kg 4.245 Floor space (LxWxH) mm 4.083x2.743x2.576 Standard configuration Control: WinMax Kjdpfxjwzlupo Abredu Spindle 10.000 RPM Swing arm type 20 tool ATC Pocket and island milling Rigid tap and tapping Remote Jogbox

Condition: ready for operation (used), travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 510 mm, nominal power (apparent): 15 kVA, controller manufacturer: Siemens 810, total height: 2,220 mm, total length: 2,480 mm, total width: 2,740 mm, empty load weight: 4,500 kg, rotational speed of tool magazine (max.): 8,000 rpm, additional equipment features: yes, afstand tussen spindel en tafel: 150 660 mm Siemens uitgerust met ShopMill Table dimensions: 1000 x 450 mm Depth of throat (uprights-spindlecenter): 550 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 7,5 kW Number of axes: 3 axes Toolchanger: yes Kdjdpjwwbfiofx Abrsu Number of toolholders: 20 positions

Condition: excellent (used), Year of construction: 2002, Equipment: documentation/manual, We have 1 Benzinger 5_at_Work machine for sale: Benzinger 5_at_Work – (2002) with ATC (automatic tool changer) and magazine for 20 tools, stone setting option (space for 10 stone magazines), microscope (for ring centering), Blum laser (for tool setup and cutting edge inspection), SK30 holders (for horizontal and vertical tooling, including high-frequency pneumatic spindle). Several SK30 tool holders are available, including flycutters and high-speed holders (high-frequency pneumatic spindles). Kdodpfxjwmbctj Abrou

Condition: used, Year of construction: 2022, Fully integrated turning and tilting table with counter bearing Ksdpewkum Tefx Abrsdu Additional fixed table on the left for the first machining side X-travel of 1,530 mm High dynamics and speeds of 20,000 rpm Fully encapsulated work area, separate from the Tool magazine Good accessibility Easy to automate with pallets and robots X-axis travel 1,530 mm Y-axis travel 530 mm Z-axis travel 465 mm Rotary table diameter 5th axis 650 mm Number of tools 54 Spindle speed 20,000 rpm Tool Holder HSK63 U-1530 MACHINE: Advanced build variant for highest performance level in U5 5-axis version Strokes X=1530mm, Y=530mm, Z=465mm Linear guidance in all three axes Required setup elements on the machine bed for adjustment Full cladding splash guard + working area light High Precision MILLING SPINDLE: Up to 20,000 rpm in fit-motor spindle With direct drive without belt Liquid cooling Tool mount on HSK63 spindle TOOL MAGAZINE: With 54 tool stations High-speed intelligent controller version With fast-running tool chain Separated from working area by pneumatic flap U-1530 FIXED TABLE: With T-slots for fixing workpieces and clamping devices 160mm top plate available for distance table/spindle for tall superstructures and use of tailstock DIRECT MEASURING SYSTEMS in X/Y/Z-Axis: For increased positioning accuracy and improved heat transfer Designed with Heidenhain scales and integrated in control Version with SIEMENS control with the following features: Attention: Siemens general conditions for software products are valid SIEMENS 840D control with features: New developed: SPINNER-SPIOS 24" Touch Control Panel for 10.4 applications Ultra-compact design with reduced panel footprint for premium ergonomics Multitouch layout, colorful flat panel display with Multi touch functionality Integrated Edge devices for full digitization Easy to use and user interface 2-Axis Rotary Tilt Table D=650: High precision “S” design Made in Germany with direct measuring systems on both rotary axes Designed for demanding machining operations Equipped with high-power gear Rotary feed for automatic operations and pallet changer Equipped Features: Pre-tensioned high-performance brakes in B and C axis Designed for clamping during emergency stops High axial stiffness Increased accuracy in the tilting axis Heavy Duty Table: Max load capacity 650 kg Tilting force and accuracy designed for serious machining Hydraulic Brake: For large rotary table in C-axis Increased rigidity during machining Counter-Balance Function in B-axis: Compensates tilting moment on the rotary table with workpiece force Enhanced stability during machining 6-Fold Rotary Feed: Inside the center of the C-axis 6-channel designed for media connection Max hydraulic pressure of 240 bar or additional exhaust ventilation connections High pressure tank: 70 bar capacity with paper band filter for flushing, located centrally through the spindle, stand-alone next to the machine with additional coolant volume, including high-pressure pump and level monitoring. Additional blower: Air at headstock for cooling with air instead of liquid. Compressed air supply: Supplying via milling spindle, alternatively to coolant high-pressure through spindle. Rinsing gun: Installed in the working area for cleaning. Preparation: For SPINNER-Blum Touch probe with IR receiver for wireless transmission. "Advanced Surface" For optimizing the machining surface. "Spline Interpolation" To shorte...