Swiss Gourmet Wassmer

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Kwsdpfxsycqzie Aaxot Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2004, number of beds: 4, first registration: 03/2004, total length: 7,200 mm, total width: 2,300 mm, total height: 2,600 mm, overall weight: 1,600 kg, empty load weight: 1,275 kg, Equipment: bathroom, onboard kitchen, parking heater, twin bed,

Condition: used, axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 435/50R19,5, tire condition: 40 %, color: black, Year of construction: 2017, Equipment: ABS,

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Kwedpfxeycqy Eo Aaxjt Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Kjdpfx Aasycqyxsxjwt Price: On request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Kwedpfxsycqyro Aaxst Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, 10 cup wheels vertical glass edging machine total number of working meters : 60.000 witth extended in - and outlet conveyors and higher rack . min. glass size : 40 x 40 mm glass thikness : 3 - 55 mm Kwsdpoycqylofx Aaxet speed : 0,4 - 6 m/min.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Dahlih MCV-1500 – Technical Specifications Machine Type: Vertical Machining Center Manufacturer: Dahlih Model: MCV-1500 Axis Travels X-Axis: approx. 1,500 mm Kjdpfxsycqx Uo Aaxewt Y-Axis: approx. 630 mm Z-Axis: approx. 700 mm Spindle Spindle Taper: BT / ISO 50 Spindle Motor Power: approx. 15–17 kW Max. Spindle Speed: approx. 4,500 rpm Tool System Automatic Tool Changer: approx. 24 tools Table Table Load Capacity: approx. 1,300–1,500 kg (depending on configuration) Control System Typically equipped with Fanuc CNC control

Condition: good (used), Year of construction: 2011, CNC-automatic lathe Kwodpfeycqx Isx Aaxst brand: STAR type: SR-32 J Type N new in: 2012 equipped with: FANUC 32i Model B Steuerung Synchronspindel angetriebene Werkzeuge C-Achse Rückseitenbearbeitung Hochdruckpumpe Späneförderer Teileförderband Feuerlöschanlage Ölnebelabsaugung Stangenlademagazin FMB TURBO 3-36

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Kwsdpjycqxzofx Aaxst Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1997, Boy 80 M Year of manufacture: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Injection pressure: 2085 bar Metering volume: 147.6 ccm Clamping unit : clamping force: 80 t tie bar distance: 410x358 mm size of clamping platens: 680x555 mm ejector: hydraulic clamping unit: toggle lever Control system: Procan CT Additional equipment: * Dimensions: Weight: 3200 kg Kwedpfx Aasycqxuexet Length/width/height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Kwodpjycqxhefx Aaxjt Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Kwedpfx Aeycqw Roaxet Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit : clamping force: 55 t tie bar distance : 360x335 mm size of clamping platens: 665x600 mm Ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 16.624 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Kwodjycqw Dopfx Aaxet Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Year of construction: 2026, Surface Grinding Machine 400 × 1000 The 400 × 1000 surface grinding machine is an advanced solution designed for high-precision flat surface grinding in the machine-building industry. Equipped with automatic feeds on all three axes and a digital readout system, it ensures excellent machining accuracy while maintaining a rigid and robust construction. A key advantage of this magnetic surface grinder is its ability to handle heavy loads up to 600 kg, making it a reliable choice for demanding production applications. Construction and Performance The machine is built on a heavy-duty bed construction that provides high rigidity and effectively minimizes vibrations during operation. The spindle runs at 1450 rpm and is mounted on precision bearings, ensuring stable operation of the grinding wheel with dimensions 350 × 40 × 127 mm. The hydraulic system controls the longitudinal table movement within a speed range of 7–23 m/min, while automatic cross and vertical feeds enable precise motion control. The 406 × 1020 mm working table, equipped with an electromagnetic chuck, facilitates secure workpiece clamping and enhances operational safety. An integrated coolant system with a 0.14 kW pump efficiently dissipates heat, preventing thermal distortion and ensuring dimensional stability. Precision and Productivity Precision is achieved through advanced feed mechanisms and accurate control systems. The automatic intermittent cross feed (0.1–8 mm) and vertical feed increments down to 0.005 mm allow machining tolerances below 0.01 mm, which is essential for components with high dimensional requirements. Productivity is further enhanced by a maximum table travel of 450 × 1130 mm and a cross feed speed of up to 990 mm/min, enabling efficient machining of large surfaces without compromising accuracy. The grinding wheel operates at an optimized speed, ensuring uniform material removal, reduced wheel wear, and a surface finish of Ra below 0.2 μm. The three-axis digital readout system eliminates manual positioning errors, shortens setup time, and increases throughput in production cycles. Technical Data Working table size: 406 × 1020 mm Maximum table travel: 450 × 1130 mm Table T-slots: 14 × 3 mm Longitudinal table speed: 7–23 m/min Maximum distance from table surface to spindle center: 570 (460) mm Kwjdpjycqwwofx Aaxot Maximum load capacity (including chuck): 600 kg Automatic intermittent cross feed: 0.1–8 mm Rapid cross feed: 990 mm/min Handwheel feed (cross): 0.02 mm (0.001") per graduation 5 mm (0.2") per revolution Grinding wheel dimensions: 350 × 40 × 127 mm Grinding wheel speed: 1450 rpm Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid vertical feed: 480 mm/min Handwheel feed (vertical): 0.005 mm (0.0002") per graduation 1 mm (0.04") per revolution Spindle motor power: 5.5 kW Hydraulic oil pump motor: 2.2 kW Coolant pump motor: 0.14 kW Vertical drive motor: 1 kW Cross feed drive motor: 0.04 kW Machine weight: 4000 kg Machine dimensions (L × W × H): 3300 × 2400 × 2000 mm Standard Equipment 3-axis digital readout Electromagnetic table 406 × 1020 mm Grinding wheel Grinding wheel balancing arbor Grinding wheel flange Tool kit 24V machine lighting Coolant system

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of construction: 2006 Spraying unit: Metering volume: 36 ccm Clamping unit: Clamping force: 30t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request Kwsdpfx Aasycqv Toxst

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Kedpfx Aajycqv Hsxewt Price: Upon request

Condition: used, New: No Please contact us for more information. Kwsdpfx Aoycquvjaxst

Condition: used, mileage: 241,369 km, power: 485 kW (659.42 HP), first registration: 08/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 7,050 mm, total width: 2,550 mm, total height: 3,980 mm, Year of construction: 2023, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional Options and Accessories = - Adaptive cruise control - Roof spoiler - Double glazing - Electrically folding exterior mirrors - Remote central locking - LED headlights - Leather interior - Lift axle - Air suspension - Microwave - Engine brake - Radio - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater (parking heater) = Notes = Scania S660 V8 6x2 bogie. Retarder. Adjustable fifth wheel. Full air suspension. Leather seats. Heated and ventilated driver’s seat. Microwave. Coffee maker. Fridge. = Further Information = Technical information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Kwsdpfxsycqupo Aaxot Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 295/80R22.5; Twin tires; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Rear axle 2: Tire size: 275/70R22.5; Twin tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Weights Unladen weight: 10,375 kg Payload: 17,625 kg gross vehicle weight: 28,000 kg Interior Upholstery: Leather Financial information Price: On request Identification Type number: S660 V8 / 6x2 BOOGIE / RETARDER = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We strive to provide accurate information to the best of our ability, however, no rights can be derived from the provided texts.

Condition: used, Year of construction: 2007, number of beds: 4, total length: 9,150 mm, total width: 2,500 mm, total height: 2,519 mm, overall weight: 2,000 kg, Equipment: bathroom, onboard kitchen, parking heater, single beds, Accessories, extras, and additional components not installed by the manufacturer are not included in the sale price. These are provided free of charge. Free accessory: awning tent Since this caravan has never been registered, a full inspection report is required for registration. This can be obtained for an additional charge of €600.00, including gas inspection and new tires. Financing is available through CreditPlusbank. Ksdsycquiepfx Aaxswt

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine by the deadline, between 23.03.2026 and 27.03.2026! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm Kwodpfx Ajycquceaxot MACHINE DETAILS Hydraulic system Oil capacity, base machine: approx. 500 dm³ Oil capacity, scissor lift table: approx. 20 dm³ Cooling system (closed) Cooling unit R81: approx. 175 litres Cooling unit R101: approx. 260 litres Utility connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross section: 4 × 25 mm² Main fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supplies: 220 V AC Open cooling system Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed air Required pressure: 6 – 12 bar Max. airflow at 6 bar: approx. 2,275 Nl/min Machine tolerances Angle accuracy: ±1° Dimensional tolerance of bent parts: ±0.2 mm Repeatability: ±0.1 mm Positioning accuracy during centering: ±0.1 mm Straightness of bent parts: ±0.1 mm/m Tool change time: Automatic during loading/unloading Length adjustment: Via bending program and in increments of 4 (5) mm Dimensions & Weight Space requirement (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Estimated up to 3,000 mm Total weight (without oil fill): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Remarks: Robot converted to use magnetic lifter EQUIPMENT Various spare parts in wooden crates

Condition: new, Year of construction: 2026, functionality: fully functional, CBN Borazon Grinding Wheel for CORMAK DG13M Drill Sharpener – precise and durable grinding disc High-quality CBN borazon grinding wheel dedicated to the CORMAK DG13M drill sharpener is a consumable element that directly affects sharpening quality and the service life of cutting tools. It ensures precise HSS drill sharpening across the full range handled by the machine. Its construction is optimised for demanding workshop and industrial conditions, offering high efficiency and minimal abrasive wear. Main product advantages Dedicated to the CORMAK DG13M sharpener – ensures perfect fit and optimal operating parameters. CBN (borazon) abrasive material – optimal for sharpening HSS high-speed steel tools. Vibration-free operation – high dynamic balance of the wheel eliminates vibrations and improves sharpening quality. High durability – significantly outlasts standard aluminium oxide wheels. Stable sharpening parameters – ensures repeatability and accuracy even during series regeneration of drills. Construction and technology CBN wheel (Cubic Boron Nitride) is the second hardest abrasive material after diamond, yet far more resistant to temperature and wear when working with HSS steel. The specialised bond and precise geometry make it ideal for applications in sharpeners such as the CORMAK DG13M, where edge accuracy and long tool life are essential. The wheel is optimised for direct mounting on the machine spindle axis, ensuring minimal runout and reliable grinding performance. Precision and work efficiency The use of a CBN wheel in drill sharpeners such as the DG13M results in significantly improved operating parameters: shorter sharpening time, lower tool temperature and reduced risk of burning. The high rigidity of the abrasive allows for a uniform and sharp cutting edge while maintaining the correct rake angle and drill geometry. This makes drill sharpening more repeatable and efficient. Ensure the highest sharpening quality – choose a grinding wheel for the CORMAK DG13M sharpener Kwsdpsycqt Sofx Aaxet Replacing a worn wheel with the original CBN borazon grinding wheel ensures optimal sharpening quality in drill sharpeners. Thanks to the wheel’s high efficiency and durability, you minimise downtime and improve process performance. Order now and restore full precision to your CORMAK DG13M drill sharpener!

Condition: used, functionality: fully functional, power: 46.19 kW (62.80 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 4,925 kg, number of seats: 1, shovel volume: 0.85 m³, Year of construction: 2021, machine/vehicle number: 2472038, Equipment: UVV, all wheel drive, cabin, Technical specifications Year of manufacture: 2021 Engine: Diesel, 62.8 hp (46.2 kW) Displacement: 3.3 l Bucket capacity: 0.75 - 1.25 m³ Straight tipping load: 4,220 kg Steering type: KL Max. dump height: 2.33 m Dimensions (L x W x H): 5.57 m x 1.80 m x 2.49 m Operating weight: 4,925 kg Maximum speed: 20 km/h Kwedpjycqwqsfx Aaxet Fully functional, general signs of use

Year of construction: 2018, condition: used, New: No Power: 313 kW (426 HP) VAT/margin: VAT qualifying Kwedpfxoycqtle Aaxet

Year of construction: 2018, condition: used, New: No Power: 313 kW (426 HP) VAT/margin: VAT qualifying Kwedpfx Aaeycqtfoxst