AVR Engineering

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, actuation type: hydraulic, controller model: Delem Touch, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 100 mm, overall weight: 7,700 kg, total length: 3,600 mm, total width: 1,650 mm, total height: 2,400 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Technical Data Manufacturer: Trumpf Type: TruBend 3100 – B26 Year of Manufacture: 2014 Capacity: 100 t Bending Length: 3060 mm Distance Between Uprights: 3384 mm Stroke Length: 200 mm Dimensions: approx. L 3.6 x W 1.65 x H 2.40 m Weight: 7.7 t Equipment - Controlled axes: X, X1, R, Z1, Z2 - Self-adjusting combined crowning system - Machine control: Multi-Touch Delem - Amada tool clamping system, top and bottom - Work area lighting - Laser-safe safety light curtain Pedpj Agck Sjfx Amlegu - Control panel with foot pedal - Large tool set All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, total length: 3,000 mm, Equipment: CE marking, documentation/manual, foot remote control, • Effective cutting length: 3,050 mm (max 3,100 mm) • Maximum cutting capacity (Fe / Rm = 420 N/mm²): 6 mm - 8 mm • Throat depth (Gooseneck / Throat): 500 mm • Distance between uprights: 3,200 mm • Back gauge stroke: 1,000 mm (motorized) Pgjdpfj Afy Ugsx Amlsu • Installed power (Motor): 11 kW • Voltage / Frequency: 380 V / 50 Hz • Minimum pneumatic pressure: 6 bar • Approximate machine weight: 9,000 kg

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 745003, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA 65, bending force (max.): 110 t, table height: 800 mm, oil tank capacity: 200 l, overall weight: 13,000 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 3,000 mm, input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, F.lli Farina 3-axis, 4100-ton press, 110-ton capacity. Year of manufacture: 2003. Delem 65 control system. The machine is still in perfect working order and is for sale due to limited use. Pjdpfx Ao Afwybemlegu

Condition: excellent (used), Year of construction: 2021, 2021 Bystronic Xact Smart 225/4100 CNC Press Brake with Bystronic ByVision Controller Thrust: 225 T. Maximum working length: 4,100 mm. Maximum stroke: 200 mm. Rapid traverse speed: 140 mm/s. Working speed: 1–10 mm/s. Return speed: 115 mm/s. S.No: XACT21278SE (2021). Note: Machine located in Czestochowa, Poland. Pgode Ad Dplspfx Amlsu Machine weight: 15,000 kg.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Cutting performance Cutting length: approx. 3,200 mm MACHINE DETAILS Manufacturer and model Manufacturer: Beyeler Type: CP-3100X13 Machine type: Plate shear Dimensions and weight Pgode Adu Tuspfx Amlju Length: 4,000 mm Width: 2,400 mm Height: 2,300 mm Weight: 10,000 kg

Condition: ready for operation (used), Year of construction: 2006, pressing force: 102 t, This 4-axis Durma ADS 25100 was manufactured in 2006. It features a press force of 100 tons and a length of 2500 mm, making it suitable for various bending applications. If you are looking to get high-quality bending capabilities, consider the Durma ADS 25100 press brake we have for sale. Contact us for further details. Pgjdj Adrvaspfx Amlsu Technical Specification Bending Length 2500 mm

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Pgjdpfxo Aa Dc Ds Amlou Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Control: CNC Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Year of manufacture: 2008 Psdpfj Aazxijx Amlegu

Condition: used, Year of construction: 2001, 3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Pgsdsz Tfmrspfx Amlou Condition & Maintenance: As can be seen in the attached images, all machines have been regularly maintained as part of the annual safety inspection (UVV). The last inspection for all units took place in the summer of 2026. The machines are currently still in operation and are fully functional. Inspection & Contact: An on-site inspection is possible on weekdays until 2:00 PM.

Condition: good (used), Description: Pjdpfxoz S Hw Aj Amlsgu The machine is in good technical condition, and a test run is possible upon prior agreement. Tooling included. Distance between uprights: 3,700 mm. Stroke: 320 mm. Maximum opening between table and ram: 535 mm. Upright overhang: 510 mm. Width of work table: 90 mm. Approach speed: 140 mm/s. Working bending speed: 10 mm/s. Return speed: 140 mm/s. Range of back gauge X: 820 mm. Range of R-axis: 150 mm. Main motor power: 18.5 kW. CNC control: Delem DA-65. Lubrication: central. Weight: approximately 20,800 kg.

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning Pgodpfx Asz S D Tujmleu

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Technical data: Pgedpfez R Rkfox Amlou - Max. working length: 3340 mm - Stand opening: 2600 mm - Max. pressing force: 100 t - Overhang: 400 mm - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Condition: used, Year of construction: 2008, 2008 Axe & Status Durma E40300 CNC Hydraulic Press Brake With Durma DU6000 Control & Assorted Press Brake Tooling Capacity 4,050 Width x 300 Tonne Bending Force. Stroke 245mm. Distance Between Columns 3,550mm. Maximum Top Tool Weight 75kg. Maximum Bottom Tool Weight 87kg. S/No. 7553083315 (2008). Pgsdpfx Amez Rw Rwolsu With Tooling Rack With Contents Of Press Brake Tooling, Trolley With Press Brake Tooling, Sick Safety Light Guards, Foot Switch & 2 Front Arm Supports. Overall Dimensions L5,600 x W2,500 x H3,100mm. Weight 17,500kg.

Condition: excellent (used), Die block, 80 x 80 mm with V-grooves approx. 86°, length 2500 mm Pjdpfx Amsz Ndppslogu

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 200 l, overall weight: 7,500 kg, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, pressing force: 110 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC press brake 110 t × 3200 mm – MTP SPB 110/3200 with Delem DA-66S, 6+1 axes – NEW, IN STOCK New electro-hydraulic servo-synchronised CNC press brake with 1100 kN bending force and 3200 mm worktable, controlled by the Delem DA-66S 24" touch-screen CNC with 3D graphics. 6+1 CNC axes (Y1, Y2, X, R, Z1, Z2 + V crowning), servo main drive, laser safety guard. The machine is in stock in our warehouse and ready for immediate dispatch. KEY FEATURES • Delem DA-66S CNC: 24" full-touch colour screen, 3D graphics, automatic bend-sequence calculation, Profile-S2D offline software • 6+1 axes: Y1, Y2 (ram), X, R (back gauge depth/height), Z1, Z2 (finger positioning) + V (CNC crowning) • Electro-hydraulic servo synchronisation of Y1/Y2 with GIVI (Italy) linear scales on both sides, resolution 0.005 mm • ESTUN servo main motor – up to 60% energy saving, quiet operation • Rexroth hydraulic valve block and pump, NOK seals, EMB fittings • CNC motorised wedge crowning (V axis) – automatic deflection compensation along the full table length • Servo back gauge on Taiwan ball screws and double linear guides, 3-section adjustable stop fingers • Upper tool quick clamping (accuracy 0.02 mm), height-adjustable front sheet supports • Safety: DSP (Italy) laser guard, rear light curtain, KACON foot switch, Schneider electrics • Rigid frame verified by FEA, machined in one set-up on a CNC gantry machining centre TECHNICAL DATA • Nominal force: 1100 kN (110 t) • Worktable length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Max. opening height: 480 mm • Ram speed: rapid approach 180 mm/s, working 13 mm/s, return 170 mm/s • Ram repeatability: ±0.01 mm; positioning accuracy ±0.02 mm • Back gauge repeat positioning accuracy: ±0.02 mm • Workpiece straightness: 0.3 mm/m Pgjdpez I S Drsfx Amlju • Main motor: 8.5 kW servo • Dimensions (L × W × H): 3850 × 1650 × 2680 mm • Weight: approx. 7 t • Year of manufacture: 2026, CE marked STANDARD DELIVERY Press brake, levelling bolts, foot switch, operation manual, CNC manual, hydraulic and electrical schematics, foundation drawing, CE certificate. Condition: new. In stock – immediate dispatch. Terms: price net, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Transport can be arranged to any European destination – delivery quote on contact.

Condition: excellent (used), Year of construction: 2003, operating hours: 60,000 h, Press force / Bending length: 1700 kN / 4080 mm TrumaBend control system / Standard: Pgsdpfx Aez I Suksmlsu 2D graphics control, color, DELEM.

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Pgjdpfx Amez H Udlslsu Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PB11032, stroke length: 250 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table height: 850 mm, oil tank capacity: 400 l, overall weight: 8,000 kg, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, pressing force: 110 t, clearance between the columns: 2,600 mm, distance table to ram: 2,700 mm, ram plate length: 3,200 mm, ram plate width: 1,700 mm, table length: 3,200 mm, table width: 300 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1100 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2600 mm 5 Stroke 200 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY Pgodpfoz H Skvex Amleu 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Type: V85 Capacity: 2050 x 85 tons Pgsdpfxsz Hwi Rs Amlsu Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table CNC crowning

Condition: excellent (used), Year of construction: 2006, Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Response time: max. 95 ms Pgsdpfx Asz Hl Nfsmlju Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Weight of the press: 7,300 kg Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V= Compressed air connection: 6 bar

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Pedez Hka Aspfx Amlsgu Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, DURMA E30120 CNC DOWNSTROKING PRESSBRAKE. 3 METRES 120 TONNES CYBELEC DNC 60 CONTROL Pgsdpfx Amsz Hfhuslou SAFETY GUARDS

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Capacity: 4000 x 100 tons Weight: 7700 kg Pgedpfx Asz Hbu Remlju The machine can be placed in a museum and is sold as is, where it is.

Condition: used, Year of construction: 2000, overall weight: 9,200 kg, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Psdpfx Amoz Ak Dislsgu Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2009, Used 3-meter Safan E Brake Pgodpfszz N R Eex Amlou Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons E Control CNC control system Y1, Y2, X, R, Z1, and Z2 CNC control Wila New Standard hydraulic top clamping system Year of manufacture: 2009 New PC installed