Trippolt

Condition: new, Year of construction: 2022, The technique is intended for concentration, calming the mind, and decision-making. Bodpfx Asyhahioaqewh Dimensions: Height 2.8 m, Diameter 1.6 m Made in Lithuania, "MITRONAS Engineering"

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Bsdpoyg N E Isfx Aaqowh

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-site: L & Z VDF Lathe Type: 21 RO Year of manufacture: 1975 Centre height: 210 mm Swing over bed: 430 mm Swing over support: 250 mm Spindle bore: 56 mm Spindle speeds: 15 – 1400 rpm Drive power: 5.5 kW Weight: 2.5 t Chuck Tool holder Bsdpfx Aaeyg Emhoqjwh Coolant system Price: Euro 2,500.— plus VAT, ex-site.

Condition: excellent (used), - Maximum turning diameter over bed: 500 mm. - Maximum turning diameter over gap/bridge: 580 mm. - Turning length between centers: 1500 mm. - Spindle bore: 71 mm. - Spindle speed range: 14–1800 rpm (22 speed steps). Bwedpfx Aaeygy Dusqoh - Main motor power: 11 kW. - Machine weight: approx. 3,000 kg. - Equipped with rapid feeds (0.55 kW motor) - Tailstock with Morse taper 5.

Condition: used, Year of construction: 2007, functionality: fully functional, We are offering this used CNC milling machine OPTIMUM F100, year of manufacture 2007, currently located in Spain. Immediately available. Control: CNC SIEMENS Sinumeric 802S Bsdpfx Ajygwudoaqewh Milling Table: 920 x 280 mm T-slots: 16 / 3 / 65 mm Maximum load: 300 kg Travel distances (X, Y, Z): 450, 300, 400 mm Distance spindle center - column: 410 mm Air consumption: 0.1 - 0.15 m³/h at 0.6 MPa Spindle taper: SK 40 Tool holder: see image 2-54.jpg Drawbar M16 for pneumatic tool clamping: see image 2-54.jpg Speed range: 100 - 8000 rpm Spindle motor power: 4 kW Feed axes (stepper motors): Max. feed rate X: 3000 mm/min Max. torque X: 9 Nm Max. feed rate Y: 3000 mm/min Torque Y: 9 Nm Max. feed rate Z: 3000 mm/min Max. torque Z: 9 Nm Operating voltage: 3 x 400 V, 50 Hz Rated current: 25 A Total connected load: 5.8 kW Dimensions: 1770 x 1450 x 2150 mm Total weight: 1100 kg

Condition: ready for operation (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Turning length: 2800mm Workpiece weight: 5000kg Bodjyghprspfx Aaqowh

Condition: used, Year of construction: 1988, functionality: fully functional, 1 Lead and Screw-Cutting Lathe Manufacturer: Stanko Model: 1M-63b Year of manufacture: 1988 Swing diameter over bed: 700 mm Swing diameter over carriage: 350 mm Turning length: 3000 mm Centre height measured in bed: 320 mm Spindle bore: 70 mm Bwsdeyf Dyqjpfx Aaqeh Spindle speed max.: 10 - 1250 rpm / 24 steps Cross feed: 0.0256 ... 0.378 mm/rev Longitudinal feeds: 0.064...1.025 mm/rev Tailstock quill travel: 240 mm Tailstock taper: MT5 Total power requirement: 14.0 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 5.1 x 1.8 x 1.6 m Travels of carriage: Longitudinal travel = 3000 mm Cross travel = 400 mm Tool post travel = 220 mm Coolant system with pump Accessories: 2 steady rests 3-jaw chuck

Condition: ready for operation (used), Lead and feed screw lathe Manufacturer: VDF Model: MA22 Max. turning length: approx. 1000 mm Bedpfx Aaeyfnabjqewh Centre height: approx. 150 mm Spindle bore diameter: 60 mm With 3-jaw chuck, manufacturer FORKARDT, diameter: 200 mm Coolant system and Multifix quick-change toolpost

Condition: used, Year of manufacture: 1980s/90s Technical data: Bwjdpfxeydk Hhs Aaqeh Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: used, functionality: fully functional, Optimum Gear Drilling Machine B40 GSM MK4 Serial Number: 42194 with Coolant System electrical quill feed thread cutting function integrated machine lamp 400 V 16 A power supply cable motor power: 1.5 kW, 400 V ~50 Hz coolant pump motor: 40 W max. drilling capacity in steel: Ø 35 mm max. thread cutting in steel: M 24 max. drilling capacity in cast iron: Ø 45 mm max. thread cutting in cast iron: M 30 quill stroke: 180 mm throat: 350 mm spindle taper: MK 4 automatic quill feed: 2 steps / 0.1 - 0.2 mm/rev spindle speed: 50 - 1450 rpm number of speeds: 18 steps Bwsdpsydc Hmsfx Aaqoh work table area (L x W): 560 x 560 mm T-slot size: 18 mm max. distance spindle - table: 780 mm base area (L x W): 510 x 500 mm max. distance spindle - base: 1320 mm column diameter: 150 mm dimensions (L x W x H): 730 x 560 x 2220 mm net weight: approx. 580 kg

Condition: used, Year of construction: 1992, Voest-Alpine DA210/2 - Universal Lathe Distance between centers: 2000 mm Swing diameter: 420 mm Spindle bore: 52 mm - 3-axis digital readout - 4-jaw chuck Ø 250 mm - Multifix quick-change tool post - Coolant system - Work area lighting - Chip guard rear wall - Year of manufacture: 1992 Optional accessories: - Fixed steady rest (€650 excluding VAT) Technical Data - Center height over flat guideway: 210 mm - Center height from floor: 1090 mm - Bed width: 330 mm Main spindle: - Spindle nose according to DIN 55027: Size 6 - Spindle bore diameter: 52 mm - Front bearing diameter: 83 mm Bsdpfxoyc Sqro Aaqjwh - Internal taper: Metric 57 - Number of speed steps: 12 - Speed range: 33 - 1500 rpm - Max. torque: 900 Nm Tailstock: - Tailstock quill diameter: 65 mm - Morse taper: MT 4 Slide: - Leadscrew pitch: 6 mm - Tool shank cross section (HxW): 20 x 20 mm Working areas: - Swing over bed: 435 mm - Turning diameter over cross slide: 245 mm - Cross slide travel: 330 mm - Top slide travel: 130 mm - Tailstock quill travel: 120 mm Permissible workpiece weight: - Between centers: 500 daN - Unsupported in chuck: 150 daN Feeds: - Longitudinal feeds: 0.072 - 4.038 mm/rev - Cross feeds: 0.036 - 2.019 mm/rev - Metric threads: 0.05 - 28 mm - Inch threads: 56 - 1 TPI - Module threads: Mod 0.25 - 14 - D.P. threads: 112 - 2 TPI Electric drive: - Motor power: 5.5 kW - Rated motor speed: 1500 rpm Dimensions: - Machine dimensions (WxHxD): 3250 x 1700 x 1100 mm - Weight: approx. 1500 kg

Condition: ready for operation (used), Year of construction: 2000, spindle bore: 60 mm, center height: 270 mm, center width: 1,500 mm, overall weight: 3,000 kg, fagor 8050 Bwodpfx Aajycr Hteqeh Multifix turret type B Ladner 250MM chuck Capacity 1500X540MM Steady rests

Condition: ready for operation (used), functionality: fully functional, Centre distance: 750 mm Swing over bed: 430 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Weight approx.: 2 t Accessories: steadies, Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. Bwodpsycrwfjfx Aaqeh The machine is low-priced and only suitable for simple tasks.

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm Bwodpfx Aaeyaypkjqsh -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: refurbished (used), functionality: fully functional, Lathe Brand: ERNAULT Model: CHOLET 550 Bedpfxjyapkwe Aaqjwh Distance between centers: 1000 mm Center height: 250 mm Max. diameter over bed in front of faceplate: 550 mm Max. diameter over bed: 500 mm Max. swing in gap: 710 mm Spindle bore: 52 mm Morse taper: No. 5 Max. cross slide travel: 350 mm Power: 11 hp

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Center distance: 1000 mm Swing over bed: 420 mm Bjdpfx Aeyah Rvjaqjwh Center height over bed: 210 mm Swing over cross slide: 220 mm Center height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 Size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Power supply: 380 Volts, 50 Hz - Spindle speed selectable across 12 geared steps - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of jaws) - Multifix size B quick-change toolholder, with 3 tool cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Dimensions (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg Very good condition

Condition: good (used), Year of construction: 1988, From business liquidation Kern D20A Bsdpfx Aoyag H Ajaqjwh Year of manufacture 1988 Centre distance 1000 mm Spindle bore 45 mm Turning diameter 420 mm 2-axis digital readout by Heidenhain Speed range from 31.5-1400 rpm Rota-S-Plus three-jaw chuck with various interchangeable jaws Multifix Steady rest Tailstock Work light Coolant pump 2x emergency stop Accessories: 5x Multifix Gr.B Live centre + fixed centre + drill chuck Faceplates Machine feet Spare jaws for chuck 380 Volt Weight 1950 kg Dimensions approx. 2500x1200x1950 mm (LxWxH)

Condition: used, Year of construction: 1970, digital readout ja weight 4,4 t Bjdpfjyacnpex Aaqjwh rapid traverse ja m/min

Condition: ready for operation (used), functionality: fully functional, Eccentric Press Manufacturer: Heilbronn Model: UREP 75 Max. Pressing Force: 75 tons Table Size: 720 x 600 mm Ram Length: 450 mm Ram Width: 300 mm Max. Installation Height: 370 mm Stroke min.: 8 mm Bjdpfx Asx U T Hgsaqswh Stroke max.: 110 mm Hole Length: D 150 mm Ram Adjustment: 80 mm

Condition: used, Year of construction: 2017, functionality: fully functional, Equipment: rotational speed infinitely variable, Pinacho lathe Type SC 250 Year 2017 Bodpfex Ux Dwjx Aaqjwh With digital readout Centre distance 1500 mm Complete

Condition: excellent (used), For sale: metal lathe from the English manufacturer Harrison, model m300, as shown in the photos. The machine is in very good condition. It is equipped with a new 160 mm chuck from Fuerda. Bodpex Ur Amefx Aaqewh Sino brand optical scales have been installed. During test turning over 20 cm, a diameter variation of 0.04 mm was measured. Price is non-negotiable. Net price +23% VAT. Chuck: 160 mm Turning length: 600 mm Swing over cross slide: 220 mm Swing over bed: 320 mm Tailstock taper: MK3 Spindle bore: 38 mm

Condition: used, L + Z Lathe TONGIL- SAEILO Type TIPL-4SP Machine No. 00570319 Year of manufacture: 1985 Centre distance: 1000 mm Swing over bed: 400 mm Swing over cross slide: 210 mm Centre height over bed: 200 mm Centre height over cross slide: 105 mm Spindle bore: 58 mm Spindle speed: 55 - 1600 rpm, 16 steps Feed: Longitudinal and cross Tailstock taper: MT4 Chuck flange: Camlock, taper size 6 Motor power: 4 / 6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear stages - 3-jaw scroll chuck RÖHM Ø 200 mm with stepped jaws - Multifix quick-change tool post size B with 2 exchangeable tool holders Bwedpfx Aaex Urbveqeh - Spindle brake via mechanical foot pedal - Coolant system - Emergency stop - Machine lamp Space required (L x W x H): 2250 x 1050 x 1220 mm Weight: 1500 kg

Condition: good (used), Year of construction: 1975, Offer 24204 Technical data: - Maximum swing diameter over bed: 420 mm - Centre distance: 1000 mm - Spindle bore: mm - Tailstock quill taper: MT 4 - Tailstock quill travel: 200 mm Bedjx Tqg Ijpfx Aaqowh - Spindle speeds: 40 - 2000 rpm - Longitudinal & facing feeds - Metric thread pitches - Imperial threads - Module threads - Drive: 400 V - Includes: 3-jaw chuck - SWS steel toolholder with 3 inserts - Space required: approx. W 2800 x H 1250 x D 950 mm - Weight: approx. 2200 kg

Condition: excellent (used), functionality: fully functional, Distance between centers: 1500 mm Center height: 220 mm Spindle bore: 52 mm Tailstock quill: MK 4 18 speeds: 25 - 2000 rpm Pole-change motor: 2.9 / 5.9 kW with gap bed bridge Bwsdpfsx S Hynjx Aaqjh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3096524, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system Bwodpfx Aaex R Sb Isqjh 3 jaw chuck 165mm diameter Collet chuck Parts catcher Hydraulic tailstock Tool presetter Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system