Rapid-Press

Condition: good (used), Renz Punch 500 perforator The device is in very good condition. New model with regulation Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole + a cutout for the pendant. Gsdezdaydspfx Anxjbn Manufacturer’s description: Perforation device with a working width of up to 500 mm The device is designed for continuous operation and high loads The work cycle is activated by a foot pedal Perforation of up to 40 sheets (4 mm) in one cycle Quick and easy replacement of perforating strips Possibility of using strips with/without a recess for the hanger Possibility of using QSA strips (quick format change by turning off selected needles without having to remove the strip) Possibility of using two-part strips – one tool allows perforation of both books without a recess for a hanger and calendars with a recess for a hanger (in this case, perforation without a recess for a hanger up to 465 mm) Device with 3-phase power supply Weight 120kg

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 330 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Godpfxozdaw No Anxsbn Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: good (used), HSM ProfiPack P425 Cardboard Shredder This machine produces filling material from cardboard waste. Made in Germany. In like-new condition, the machine is ready for production. Description: This high-performance filling material machine processes multiple layers of cardboard into padding mats or filling material, depending on your needs. The cardboard is simultaneously scored and profiled, creating a flexible mat of the desired width. The machine is equipped with casters for easy relocation. Advantages: Gbsdpfx Anszdawisxen – Hardened cutting rollers made of solid steel – Strong and efficient drive suitable for continuous operation – Adjustable material feed speed – Adjustable output material volume – Infinitely variable working width adjustment with a scale allowing for cutting filler material to any size – Intuitive operation via a durable control panel with LED messages – Integrated turbo function prevents blockages – Safe operation thanks to a safety switch – Equipped with wheels with brakes – Strong drive enabling cutting of 2-3 sheets of cardboard – Weight: 175 kg – Dimensions (H x L x W): 1040 x 570 x 770 mm

Condition: good (used), Multigraf Touchline C-375 Automatic Creasing Machine This machine is in very good condition and fully functional. Purchased from a small digital printing house. Year of manufacture: 2014. This is the most efficient creasing system on the market, featuring a robust design. Made in Switzerland. Can be connected to the Multigraf Touchline TF-375 folding machine. Controlled via a touchscreen color monitor. Technical specifications: Maximum sheet size: 375 x 660 mm Min. sheet size: 105 x 148 mm Gbodpfx Anezdavlexen Maximum speed: 6000 sheets/h Material weight: 80-400 GSM Power supply: 230 V Weight: 180 kg

Condition: good (used), Renz Punch SU 500 Perforator This machine is in very good condition. The set includes a base for the machine. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforating machine with a working width of up to 500 mm Godpfxszdauue Anxjbn Designed for continuous operation and heavy loads Function cycle activated by a foot pedal Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforating strips Available with or without a cutout for the hanger Power supply: 3-phase, 380V. Weight: 170 kg.

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. Godezdar Hspfx Anxsbn This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, manuelle Rillmaschine - Perforiermaschine / manuel Creasing - Perforation machine Nut- und Perforationsmaschine / Creasing and Perforation machine Halin & Schächinger CP Serial-No. 2708 Arbeitsbreite / Working width max. 500mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation Gjdpezbawdjfx Anxjbn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Gbsdszbarzepfx Anxsn Nut- und Perforationsmaschine / Creasing and Perforation machine Pernuma 1470H Serial-No. 3473 Arbeitsbreite / Working width max. 500mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation   Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Nut- und Perforationsmaschine / Creasing and Perforation machine Foellmer EX Serial-No. 156 Arbeitsbreite / Working width max. 450mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation Gsdpjzbah Nofx Anxobn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: as good as new (ex-display), functionality: fully functional, working width: 450 mm, A very nice semi-automatic creasing machine is for sale. Gbedpfx Ajza Ufmjnxsn Brand: Cyklos, type GPM 450 SA. Features a program memory and touch display. Heavy-duty metal construction. You are welcome to test this machine at our location. We can arrange transport and packaging and load it into a truck or container for you. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Gbsdpfx Anszaz N Esxsn Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Weight: 400gsm programmer Weight: 150kg Gbsdpsy Umiuefx Anxjn Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: excellent (used), Year of construction: 2016, Equipment / Additional information: Gbodpfx Ajy Ukp Ssnxsn new tool for perforating

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator This machine is in very good condition. It comes from a government institution. Gjdpfx Anoy Tu I Aexjbn Includes a 4x4mm perforation tool with a cutout for the hanger. This two-module tool is designed for continuous operation and heavy loads. The unique „Two-finger” system ensures perfect reception of sheets of varying weights. After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Two-piece perforation strips can be used, allowing for the perforation of both books and calendars. Perforation up to 2.4mm in a single cycle. Quick and easy replacement of perforation strips. Perforation strips can be used with or without a cutout for the hanger. Quick format change by switching off selected needles without having to remove the bar. 230V power supply Weight 720kg Made in Germany.

Condition: good (used), Bacciottini Pit Stop AFSpeed ​​Automatic Creaser The device is fully operational and ready to use. It is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Gedpfx Aey Tu Ivenxjbn Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 100 x 150 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 200 kg Dimensions: 1600 x 800 x 1200 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, STC-Ref:G-791-0203 GraphicWizhard GW-8000 ,Year: 2002 Gsdjy Tnm Eopfx Anxobn equipped: - Creasing and perforation unit - Sheet size max. 45 x 45 cm - Output max.8000 strokes/hr. - Paper weights: 45-300 g/m² - autom. suction air sheet entry - perforation, slitting, and creasing are possible - Program control - spare parts - spare tools --> available: 05/2026

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Gbjdpfx Aney S Edfjxen Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Minimum Creasing Distance: 0.1 mm A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Gjdpfxey Spaqo Anxebn Net Weight: 180 kg Dimensions: 150 x 75 x 120 cm

Condition: good (used), KAS Crease Matic Auto 50 Automatic Creaser Machine in very good condition, from a state-owned institution. Gbodpfxjy Sd Uvo Anxen Description: Working width up to 500 mm. Sheet length up to 999 mm. Programmer with the ability to store up to 28 creasing/perforation positions. Sheet feeding is automatic, and the machine has a built-in Becker compressor. Easy-to-use control panel with the ability to store up to 99 programs. Sturdy metal construction mounted on wheels for easy movement. A longitudinal perforation tool is included. Creasing of digital prints and laminated sheets is possible. Four creasing widths are included with the machine. Large work table. 230V power supply. Weight 190 kg.

Condition: good (used), Cyklos RPM 350 Plus Automatic Rotary Perforator Machine in very good condition, ready for production. Gbedpfxoy Sd Upj Anxsn Description: Automatic perforating device with a working width of 350 mm. Frictional sheet feed. Capable of producing 1-5 perforation lines per sheet. Feeder and output tray adapted to A3 and smaller formats. Easy to use. Option to upgrade with a creasing disc. Sheet counter. Adjustable feed speed from 70-130 sheets per minute. 230V power supply. Weight 20 kg. Made in the Czech Republic.

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Gedpfjy Sd Uijx Anxsbn Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: good (used), Foellmer 45 ME Creaser Gbsdpjy Nzlasfx Anxon The machine is in very good technical and visual condition. One owner since new. This is the newest model, currently in production. The machine has a working width of 450 mm. 380V power supply. Equipment includes a creasing bar, front margin, and side margin. This creaser is recommended for larger runs. It is quiet and powerful thanks to its geared motor drive. It is operated by a foot pedal.

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Godsy Nzk Nspfx Anxebn Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Gjdpfx Asy Nzkvsnxebn Non-stop vacuum feeding with the option of adding material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Machine with an enlarged format up to 1000mm. Technical data: Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm

Condition: like new (used), functionality: fully functional, overall weight: 169 kg, Various types of machinery for sale due to company liquidation. Check out my other listings too! . Gedpfxsy Ahh Us Anxobn For sale: a Duplo DC-516 printing finisher with conveyor belt in perfect working condition.