Go.Tec!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Spindle taper: BT 40 Max spindle speed: 12,000 rpm Kodpfxoylw Uzo Ahwjdh Table width: 457 mm Table length: 1,321 mm Max table load: 800 kg. Machine dimensions: 3,300 x 2,330 x 2,570 mm Machine weight: 6,200 kg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table size D500 mm Table load 300 kg Ksdpfx Ahsylw Tdowodh X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degrees C rotation 0.001 - 360 degrees Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22.4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazine 30+1 positions Max. tool diameter (adjacent) D64 mm Max. tool diameter (adjacent slots empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kg Machine weight 6500 kg Machine dimensions LxWxH = 4420 x 2340 x 2540 mm

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Kdodpjylrn Aofx Ahwsh Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Taper:BBT 30 Workingtable: Clampingsurface:800 x 400 mm Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 1139797, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, We offer this ready for use Haas VF-2 vertical machining center, year of construction 2017. Manufacturer: Haas Model: VF-2 Year of construction: 2017 Kdedpfx Ajyll Dqohwsh In perfect working condition, comes with Chip auger, programmable coolant, WIPS and Rigid tapping. Comes with Renishaw probe and several SK40 toolholders as well as tool assembly station, 2 x tool carts, compressor, packing table, packing tape and bubble wrap. Moving countries so would like to get this sold and out of the shop as soon as possible.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 510 mm Kdsdsylk Eyepfx Ahwoh Z-axis travel: 610 mm Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax EQUIPMENT 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel

Condition: used, Year of construction: 1994, Technical details: x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm tool taper: SK40 spindle speed max.: 12.000 U/min Tool changer: 30 fach electronic handwheel Kdsdpfxeyk Urus Ahwoh chip conveyor *

Condition: excellent (used), Year of construction: 2018, 5-Axis Universal Machining Centre DMG Mori CMX 70 U Control: DMG Mori SLIMline Multi-Touch Control (Operate on Siemens) Year of manufacture: 2018 Travel: X-axis 750 mm Y-axis 600 mm Z-axis 520 mm B-axis °-10/+95 C-axis °360 Clamping area rotary axis Ø 800 x 620 mm Spindle taper: SK 40 Tool magazine: 30 stations Spindle speed: 20 – 12,000 rpm Accessories - Chip conveyor - Renishaw measuring probe kit - 3D measuring probe, infrared - Robot interface - Belt filter system 600 L - Extraction - Internal coolant – 20 bar high-pressure pump Kjdpfjyk T S Hjx Ahwedh

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 112745, travel distance X-axis: 700 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 560 mm, controller model: BROTHER, spindle speed (max.): 16,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 08/04/26 and 16/04/26! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 360 mm Travel Z-axis: 560 mm Spindle speed: 16,000 rpm Number of tool changer positions: 14 Tool holder: BT 30 MACHINE DETAILS Control: BROTHER Operating voltage: 380 V Connection: 21.5 kVA Frequency: 50/60 Hz Dimensions & Weight L x W x H: 2200 x 1800 x 2400 mm Machine weight: 3 t EQUIPMENT Air monitoring Tool breakage control Kdodpsyk Hqvjfx Ahweh 4th axis (rotary and indexing table)

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 112097, travel distance X-axis: 700 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 560 mm, spindle speed (min.): 16,000 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on schedule between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 360 mm Travel Z-axis: 560 mm Spindle speed: 16,000 rpm Tool changer positions: 14 Tool holder: BT 30 MACHINE DETAILS Control: BROTHER Operating voltage: 380 V Connection: 21.5 kVA Frequency: 50/60 Hz Kdodpfsyk Hbzjx Ahwoh Dimensions & Weight L x W x H: 2200 x 1800 x 2400 mm Machine weight: 3 t EQUIPMENT Air monitoring Tool breakage detection 4th axis (indexing and rotary table)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, controller model: HAAS, table width: 1,320 mm, table length: 460 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is set up in our warehouse and can be inspected under power! Machine is equipped with: - Chip conveyor - Internal cooling - Programmable coolant nozzle - 24-position tool changer - Rinse gun - Coolant tank - 2 machine lamps - Approx. 40 tool holders including tools - Original documentation. Kjdpfx Ajyk Erfshwedh

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: BV1403, SPINNER VC750 Travel axes: X=760mm, Y=460mm, Z=460mm Rapid traverse up to 36 m/min Robust cross table design with particularly compact footprint High-performance milling spindle up to 12,000 rpm Power 11 kW (S6/40%) In-line spindle with direct drive, without belts / SK40 TOOL MAGAZINE with 24 tool stations Control system: SIEMENS 840DE with the following standard features: - SPINNER SPIOS 24" touch panel for Industry 4.0 applications - Height-adjustable, swiveling, and tilting operator panel for optimal ergonomics - including engraving cycles - 24" LCD flat color display with multi-touch functionality - User memory 2 GByte - 15 workpiece zero point offsets - 1 free USB interface - Ethernet interface (standard) SPINNER MULTI-CONTROL WHEEL on the operator panel All key setup functions integrated in one control element Kjdpfx Aoyk Ar Aehwsdh SHOPMILL, 3D SIMULATION, REMAINING MATERIAL DETECTION, DXF Reader, PROBING FUNCTIONS for probe system integration UNIVERSAL CHIP CONVEYOR VC750 Preparation of the spindle for high pressure use with additional tank up to 22 bar Preparation for SPINNER standard measuring probe STANDARD DOCUMENTATION IN GERMAN Consisting of machine manual and CNC manuals, delivered in digital form via the control system. Hardcopies available at additional cost. Lifting eye set for crane unloading, set of 4 pieces Mandatory for crane transport Standard two-tone paintwork in light grey RAL7035 and blue-grey RAL5008 Electrical specification to EU standard as follows: Operating voltage: 3x400V +/-10% Network frequency: 50Hz (+/-2%) TN network (5-wire) Remarks: The price includes warranty services only within Germany. For new and demo machines, images shown are not necessarily of the specific machine but of comparable models. Accessories such as clamping devices or tool holders are included only if specifically listed in the technical description. Please request a detailed ex works quotation. Visit our factory near Munich or one of our showrooms. We may also have other comparable machines available. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3s HAAS VF-2SSYT CNC Vertical Machining Center manufactured in 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a capacity of 30+1 tools. The machine has been lightly used and is in excellent condition, offering travels of 762 mm in the X-axis and 508 mm in both Y and Z axes. Consider the opportunity to buy this HAAS VF-2SSYT vertical machining center. Contact us for further details. • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm • T-slot center distance: 125 mm • Spindle: • Max torque: 122 Nm @ 2000 rpm • Drive: Inline Direct-Drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/Oil injection • Tool changer: • Type: SMTC • Capacity: 30+1 tools • Max tool diameter: 64 mm (127 mm with adjacent pocket empty) • Max tool length: 279 mm • Tool-to-tool: 1.8 s • Chip-to-chip: 2.4 s • Feedrates: • Max cutting feed: 21.2 m/min • Rapids (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: Kdodjykrz Hspfx Ahwoh • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity 208 L • Air requirements: • Air required: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar • 4th-axis ready Additional equipment • Mist/vapor extraction system • Automatic water and oil dosing system for coolant • Integrated coolant oil separator • Renishaw probe system • 2 vises • Complete set of high-quality toolholders, end mills, and drills

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Kdjdpfxeykay De Ahwoh Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: used, Year of construction: 2001, functionality: fully functional, Manufacturer/Model: HURCO VMX40 Year of manufacture: 2001 Condition: Very good Location: Germany Kdodpfx Asykaadshwsh Delivery/loading possible. X-axis: 1020 mm Y-axis: 510 mm Spindle speed: 10,000 rpm Technical data: Table dimensions: 1222 x 510 mm Tool holder: SK40 With accessories and documentation

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. • Table size: 920 x 380 mm Additional equipment • EROWA Robot Multi automation Kdsdpfoyizugox Ahwsh Technical Specification Taper Size HSK 50

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Kdjdpfxsyifm De Ahwjh Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center - CE marking - Year of manufacture: 2011 - Control: Fanuc Oi-MD - Travel X / Y / Z: 720x480x530mm - Distance spindle nose / table: 100-630mm - Table size: 800x480mm - Max. table load: 500kg - Spindle taper: BT-40 - Spindle speed: 8000 rpm - Spindle motor: 7.5 / 5.5 kW - Rapid traverse X / Y / Z: 48 m/min each - Feed rate: 1-10000 mm/min - Tool changer: 24 positions - Tool change time (T-T): 3 sec - Max. tool weight: 7kg - Max. tool diameter: 80mm - Work light - Coolant system - Chip conveyor - Electronic handwheel Dimensions (LxWxH): 2.8x2.2x2.8 meters / Weight: 4400kg Kjdpfx Aoyidrrjhwsdh Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC HAAS VF-2SS 2011 Kdjdpfxsyh Rwxs Ahwsh 2 units CNC HAAS VF-2SS 2011 Fully functional

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC HAAS VF-1 2011 2 units CNC HAAS VF-1 Kjdeyh Rwropfx Ahwodh Fully functional

Condition: used, Year of construction: 2023, An as new 2023 and hardly used, XYZ TMC 750 Toolroom VMC with RMX wide screen control, additionally specified with: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter - cost in excess of £50,000 + VAT when new! Specification: Working Area 743 x 425 x 489mm Table Size 830 x 410mm Spindle Centre to Column 500mm Spindle to Table 100 - 600mm Column Front to Table Centre 305 - 745mm Rapid Feedrate 20 M/min Cutting Feedrates 1 - 20,000 MM/min Max Table Load 500kg T Slot Size 16mm T Slot Number & Pitch 3 off @100mm Spindle Speeds 5 - 8,000 rpm Spindle Motor 11kW (15hp) Kodpfoyh Ixmjx Ahwodh Spindle Taper BT40 20 Station Carousel ATC Chip to Chip Tool Change Time 8 secs Max Tool Diameter 100mm Max Tool Weight 7kg Coolant Tank Capacity 125L Ballscrew (Grade C3) 32mm Dia P8 AC Servo Motor Max Torque X = 5 Nm / Y = 5 Nm / Z = 10 Nm Machine Weight 3,500kg Footprint 2,392 x 2,460 x 2,670m

Condition: good (used), Year of construction: 2008, CNC Vertical Machining Center MICROCUT MC 800 B, year 2008, equipped with FARGO 8055M. Spindle taper ISO 40 Maximum spindle speed: 6,000 rpm Travel: X 800 mm, Y 400 mm, Z 450 mm Table: 850 mm x 450 mm Kdodpfsyhzkijx Ahwsh Tool magazine with 20 positions Good condition, demonstration possible, machine documentation available.

Condition: used, Year of construction: 2011, operating hours: 16,000 h, machine/vehicle number: 1090229, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 524 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, workpiece weight (max.): 1,550 kg, table load: 1,550 kg, rotary table diameter: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, tool diameter: 127 mm, input voltage: 400 V, type of input current: AC, Machine: Haas VF 3 Serial No.: 1090229 Year of manufacture: 2011 Operating hours approx.: 16,000 h Travel X/Y/Z: 1016 mm / 508 mm / 524 mm Spindle speed: 10,000 rpm, belt-driven spindle Table size approx.: X 1219 mm & Y 457 mm Table load: 1,550 kg Tool stations: 20, ISO / CAT 40 Rapid traverse X/Y/Z: 25 m/min Machine dimensions (LxWxH): approx. 4,000 mm / 2,800 mm / 2,600 mm Machine weight: approx. 5,600 kg. Special options: Hinged belt chip conveyor incl. 4 cross conveyors Kedpfx Asyhmcyehwedh Handwheel HRT 310 P3 / SN318596 Renishaw TS27 R + OMP 40 Software options: Sync tapping M19 Rotating and scaling Macro Through-spindle coolant (IKZ) 20 bar 4th axis for HRT 310 Software version 18.28A Repairs in January / February 2026: Spindle has been re-bedded, taper ground and balanced Tool carousel replaced LED interior lights replaced Spindle belt replaced Machine location: Solingen, North Rhine-Westphalia (NRW)

Condition: like new (used), Year of construction: 2016, operating hours: 689 h, functionality: fully functional, Wonderful 3-axis machining center High-performance machining center SPINNER VC750 with Siemens (840DE-SolutionLine V2) Equipped with Siemens 840DE-SolutionLine control Hardly used, only for experimental purposes at an engineering service provider 15" color screen with graphical user interface for shopfloor programming Siemens "Shop-Mill-OPERATE" 7 Combi-Drive Milling spindle up to 12,000 rpm, "In-Line" direct drive Power 11 kW (S6/40%) Traverses X=760 mm, Y=460 mm, Z=460 mm; 36 m/min Tool taper size 40 according to DIN 69871-A, pull studs according to DIN 69872-A Spindle taper air purge system High-speed automatic tool changer with double-arm changer for 24 tools Linear guides on all three axes Required leveling elements at the machine bed for alignment Ksdpfx Aeyhic Aohwjdh Full splash guard enclosure + coolant system + work area lighting Two-tone paint finish RAL 7035/5008 Internal coolant supply 698 power-on hours Approximately 110 spindle hours The VC750 is our dynamic and compact machining center. It is especially suitable for use in job shops and training facilities. The machine is specialized for economical and versatile production of small to medium-sized workpieces. In terms of cost efficiency, it is unmatched.

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Kdedpfxsyg R S Nj Ahwoh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 785 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 530 mm, table width: 500 mm, table length: 900 mm, spindle speed (max.): 8,000 rpm, XYZ LPM Vertical Machining Centre Model: LPM Year: 2016 ‘X’ axis Travel: 785mm ‘Y’ axis Travel: 470mm ‘Z’ axis Travel: 530mm Kedpfx Ajyg N Aaehwedh Table Size: 900 x 500mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Automatic Toolchanger: 16 station