CPinto

Condition: new, Year of construction: 2026, A modern edge banding machine designed for the precise finishing of furniture panel edges. Equipped with robust units and advanced features, it ensures high quality, efficiency, and operational flexibility at speeds up to 12 m/min. An ideal solution for production facilities that prioritize quality and consistency. Edge Banding Machine for Furniture Panels FEATURES AND EQUIPMENT 1. Pre-milling – preparing the edge of the panel for gluing. 2. Standard glue unit equipped with a replaceable glue tank. 3. Trimming of edge ends – precise trimming of the beginning and end of the edge. 4. Finishing milling – perfect alignment of the edge with the panel. 5. Corner rounding. 6. Sanding unit / wet polishing – perfect smoothing and polishing of the edge. 7. Capability to edge band panels with pre-drilled holes. Ncsdozg Eq Sspfx Ah Sju

Condition: used, machine/vehicle number: 008554, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Ncjdpfx Ahszg D Ezj Sou

Condition: used, machine/vehicle number: 008552, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Njdpfx Ahozg D D Do Sscu

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, HOLZ-HER Edgebanding Machine ARTEA 1030 - TRADE SHOW MACHINE Edge thickness, coil material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling - Edge feeder - LR101 gluing system - glue application roller (Teflon-coated) - Pressing unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Pneumatic surface scraper - Buffing unit - Spray device in the infeed and outfeed areas 12 months warranty Delivery, installation, and machine instruction can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Njdpfxezg Axto Ah Sjcu Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Ncsdpfx Aozgwzveh Sju Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: new, Year of construction: 2026, functionality: fully functional, HOLZ-HER edge banding machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed rate: 9 m/min. Glue application in PUR & EVA qualities, easily achieved thanks to the HOLZ-HER GluJet adhesive application system. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling cutters - Edge feeder - GluJet GJ201 adhesive application system - Material buffer - Glue collecting container - Automatic reloading function - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraper unit - Pneumatic surface scraper - Buffing unit - Spray system in the infeed and outfeed area 12 months warranty Nedszgu Dnopfx Ah Socu Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: AH/005553, functionality: fully functional, input voltage: 400 V, input current: 78 A, input frequency: 50 Hz, overall weight: 4,400 kg, Main specifications: Ncedszgnx Sopfx Ah Seu • Panel thickness: max 60 mm • Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] Configuration: • Pre-milling unit • Gluing unit with pressure rollers • End-trimming unit • Top/Bottom trimming unit (rough & fine) • Corner rounding unit • Radius edge scraper • Glue scraper • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing while powered.

Condition: used, machine/vehicle number: 725939, functionality: unexamined, input voltage: 220 V, Edge banding machine for sale. Suitable for DIY enthusiasts and hobby woodworkers. Ncedpfxezggf Re Ah Sju

Condition: new, SCM Olimpic 500 HT - Automatic edge banding machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control console (control panel) - Human-machine interface (HMI) software "Maestro active edge" - Fine trimming and radius cutter head, radius = 1 mm - Fine trimming and radius cutter head, radius = 2 mm - Electronic positioning of the upper pressure bar - Spacers on the infeed guide rail - "SAVENERGY" kit Ncedszgf Idspfx Ah Sju - Interior lighting of the machine housing and the edge banding area - "Nesting" contact rollers - "AAR" 1 release agent spray unit - Spray unit for final finishing of the edge - Spray unit for sensitive edges - Joining unit "RT-V1" - "EASY SIZE" device - Gluing unit "VC-VM" - Ceramic lamp with infrared radiation - Electronic positioning of the pressure rollers - Trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius cutter head "RAS-HP Multiedge 2R" - Planing cutter "RC-N" - Buffing unit "SP-V" Machine is new and still in its original packaging. Commissioning possible in Germany and Austria. Currently, a subsidy of 15% is possible in Germany; we will be happy to assist you with this. Special offer machine at a special price.

Condition: ready for operation (used), Year of construction: 2019, Edgebander manufactured in 2019. This SCM Olimpic K 560 features a feed speed of up to 18 m/min and is equipped with a 7" color touchscreen control for easy operation. It includes a 2-motor Round X rounding group for corner rounding and trimming, along with various optional groups for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K 560 machine we have for sale. Contact us for further details. Key features • Feed speed up to 18 m/min with 600 mm panel spacing, even with corner rounding • Touch 7 color touchscreen control with graphics, program management, diagnostics, and digital glue temperature control • 2-motor Round X corner rounding group for corner rounding and trimmingTechnical specifications • Feed speed: 12–18 m/min • Workpiece thickness: 8–60 mm • Edge thickness (roll): 0.4–3 mm • Edge thickness (strip): 0.4–6 mm • Max edge cross-section (roll): 135 mm² • Max roll diameter: 800 mm • Edge overhang: 2 mm top / 2 mm bottom • Workpiece spacing: 600 mm • Min workpiece length: 140 mm • Min workpiece width: 95 mm (60 mm with special setting) • Minimum length (roll material): 180 mm • Minimum length (strip material): 220 mm • Opening of workpiece pressure bar: 560 mm • Working height: 900 mmControl system (Touch 7) • 7" color touchscreen (16:9) • Graphical display and simulation of all units • Control of all units and automatic start functions • 60 freely editable programs • Full PLC control with encoder monitoring • Digital glue pot temperature control • Diagnostics with operator assistance Ncjdpfx Ajzgcl Tsh Sou • Statistics: piece counts, edge meters, chain runtime • Pass selection: first or second processing passProcessing units • Joining milling: two diamond jointing cutters, 1.8 kW each, 12,000 rpm • Glue unit VC-S4.1: 3 kW heating, 1.5 kg tank, Fastlock quick-change, motorized main + three pressure rollers • Trimming unit K/SEL: two HF motors 0.35 kW each, 12,000 rpm, swivel 0–15° • Flush milling unit R-K: two HF motors 0.55 kW each, 12,000 rpm, tool radius R2 • Round X corner rounding: two HF motors 0.35 kW each, 12,000 rpm, backlash-free precision guides • Scraper unit RAS-K: tool radius R2 • Polishing unit SP-V: two motors 0.18 kW each, 3,000 rpm Additional equipment • Autoset T-ER2 automatic changeover: • Switching between first and second passes • Automatic edge thickness change (e.g., 0.4 mm to 2 mm) • Release agent/anti-adhesive spray system AAR • Glue scraper unit RC-V • H=64 mm diamond tools for rectifying/pre-milling group

Condition: used, Year of construction: 2000, machine/vehicle number: 13304, type of input current: three-phase, workpiece height (max.): 45 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 2,250 mm, edge thickness (max.): 3 mm, actuation type: electric, total length: 10,000 mm, total width: 8,500 mm, Equipment: CE marking, documentation/manual, We offer a two-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3, manufactured in 2000, renowned for its reliability and efficiency in professional edge processing. This model handles workpieces with a thickness of 10 to 45 mm and a width of 270 to 1300 mm, offering versatility in working with various materials. The feed rate ranges from 6 to 30 m/min, enabling efficient production while maintaining high quality. The machine handles edge banding with a thickness of 0.7–3 mm and workpieces with a length of 270 to 2250 mm, making it an ideal solution for demanding industrial applications. This is a robust option for companies seeking proven machines in good working condition. The machine features a new Beckhoff control system. It is possible to purchase the entire line, including a roller conveyor equipped with a conical rotating table and a two-chamber automatic loading station. Ncsdpszgb A Djfx Ah Seu

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Maximum workpiece dimensions for processing: 2500 x 1300 mm Workable workpiece dimensions: 2500 x 1000 mm 2 Panel clamping devices Infeed worktable (panel support) Outfeed table (with motorized belts) Software: woodWOP Nedpfx Ahezga E De Sjcu

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive Ncjdpfx Ajzf Ircjh Sou The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with descriptive content. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel splitting/milling units: 1 Number of edge processing units: 4 Gluing system: EVA hot melt adhesive The machine consists of the following processing units: Panel splitting/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Trimming Number of motors: 1 Nodpfjzf Id Sjx Ah Sjcu Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Pressure roller Pressure with idler rollers Panel support guides Edge roller magazine Glue pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8570

Condition: excellent (used), BRANDT optimat kdf350C edge banding machine Pre-milling cutters Edge gluing with a roller Pneumatic pre-trimming cutter Pressure rollers Final trimming cutters R1-R2 top and bottom milling unit Corner rounding unit Profile edging unit Flat edging unit Max. element height 50mm Max. veneer thickness in roll 3mm Feed rate 11m/min Machine length 390cm Machine inspected, very good condition Ready for operation Nodpjzfyyrjfx Ah Socu

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 1552.3, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, total height: 1,380 mm, total length: 2,700 mm, total width: 750 mm, overall weight: 750 kg, For sale is a used BI-MATIC S.r.l. edge banding machine, model Starter, without a joining unit. The machine is in technically perfect condition and is ready for immediate use. Year of manufacture: 1999 Panel thickness: 8 – 40 mm Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 5 mm Glue: Granules Heating time: approx. 5 – 6 minutes Dimensions: Ncjdjzfpt Uopfx Ah Seu Length: 2700 mm Width: 750 mm Height: 1380 mm Weight: approx. 750 kg The machine can be inspected and tested by appointment. A forklift is available on site for loading, so the machine can be easily loaded onto a trailer or truck. The machine is sold used, excluding any warranty, guarantee, or right of return. If you are interested or have any questions, please do not hesitate to contact us.

Condition: excellent (used), Felder TEMPORA F400 edge banding machine Ncodezfiqtepfx Ah Sou Pre-milling cutters, Glue application via roller, Replaceable tank Tank capacity 1.5 kg Heating time 10 min Pneumatic guillotine for pre-trimming Liquids Ready-to-use trimming balls Up-and-down milling unit R1-R2 Corner rounding unit, Profile trimming cutter Flat trimming cutter, Cleaning fluids Polisher, Max element height 48 mm, Max edge band thickness in roll 3 mm, Feed rate 12 m/min In my opinion, the technical condition is very good. Year: 2024 Machine length: 423 cm Inspection and testing possible on-site.

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Njdezfapmepfx Ah Secu Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: ready for operation (used), Year of construction: 2008, operating hours: 7,900 h, Edgebander manufactured in 2008. This OTT Tornado features a maximum panel thickness of 60 mm and a minimum panel length of 150 mm. It includes a CombiMelt Glueing System and a double end trim unit for efficient processing. If you are looking to get high-quality edgebanding capabilities, consider the OTT Tornado machine we have for sale. Contact us for further details. - Operating Hours: Approx. 7,900 hours (Calculated average from 2021-2026 following computer replacement in 2021)- Voltage: 3x400 VAC- Current: 31 A- Power: 19.5 KW- Frequency: 50 Hz- Control Voltage: 24 VDC- Max Fuse: 35 A - 5x6mm²- Edge Dimensions: Max. 65 x 2 mm / 55 x 12 mm- Panel Thickness: 8 - 60 mm (Up to 42 mm for premilling)- Panel Length: Min. 150 mm- Panel Width: Min. 70 mm- Control System: Panel Lodge System / Beckhoff 15" Color Touch Screen- Glueing System: CombiMelt Glueing System (Modular design for EVA and PUR hot melt, 1.5-liter hopper)- Premilling Unit: 2 HF motors (2.2 kW, 12,000 rpm) with diamond tools- Edge Magazine: For coiled edge material (0.4 - 3.0 mm) with automatic cutting device adjustment- Double End Trim Unit: 2 HF motors (0.3 kW, 12,000 rpm), automatic positioning 0°/3°- Rough Trimming Unit (Bfc): 2 motors (0.7 kW, 12,000 rpm)- Fine Trimming Unit: 2 HF motors (0.3 kW, 12,000 rpm) for radius 2-5 mm- Radius Scraper: Two-side tracing, automatic positioning with separate dust collection container- Corner Rounding System (KF-a): 2 HF motors, double-parallelogram guidance, max height 60 mm Technical Specification Ncsdpjzd U N Esfx Ah Ssu Feed Speed 14 m/min

Condition: used, functionality: fully functional, FELDER RL300 Wood Dust Extractor Specifications: • Condition - used, after a comprehensive inspection • Manufacturer - FELDER • Model - RL300 • Turbine motor power - 9.2 kW • Filter cleaning system with compressed air • Dust collection drawer - 2 x 250 liters • Maximum capacity - 7,880 m3/h • Weight approx. 750 kg • Overall dimensions - 265 x 112 x 225 cm (L x W x H) Additional information: • The machine is in very good technical condition and ready for immediate use. • The fire extinguisher system is not charged. • The photos shown reflect the actual condition of the item being sold. • Possibility to turn on and test the device on site. • Free training on machine operation (at the company's premises). • The price stated in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using MDD's fleet, courier companies, or external carriers. • We can provide financial support in the form of leasing or a lease loan. Nodpozd S U Sofx Ah Socu

Condition: used, Year of construction: 2008, machine/vehicle number: T/41288, functionality: fully functional, power: 19.5 kW (26.51 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 14 m/min, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2008. Type: TORNADO-TOP Machine No.: T/41288 Year of manufacture: 2008 Power type: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 19.5 kW Control voltage: 24 VDC Nedpfx Ajzd Dvzsh Socu Maximum fuse rating: 35 A – 5×6 mm² Weight: If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2023, machine/vehicle number: Profi-HPP300/43/43, functionality: fully functional, operating hours: 4,134 h, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 3,200 mm, workpiece length (max.): 3,800 mm, HOMAG SAWTEQ S-300 profile line CNC panel dividing saw (Profi-HPP300/43/43) with a large touchscreen and a maximum speed of 150 m/min. Specifications Manufacturer: Homag GmbH (Germany) Type: SAWTEQ S-300 profile line Design: CNC panel saw Configuration: Profi-HPP300/43/43 Year of manufacture: 12-2023 Serial number: 0-240-87-3107 Control: large touchscreen Capacity/max.: 3,200 x 3,800 x 5,600 mm Speed: 150 m/min CE: yes Design/features Clamping bar Additional loose blades Ball-roller table with air jets Dust extraction pipes Receipt printer Homag/Pica Machine manuals available Recorded operating hours: Number of cuts: 31,843 Operating time: 4,134.18 hours Main operating time: 587.18 hours Condition Used Has already been professionally disassembled and moved by Kisjes Transport Apeldoorn (using a combination vehicle). Dimensions Assembled: 645 x 831 cm Photos Photo 1 to 21: assembled installation at its original location Photo 21 to 51: disassembled installation at the current storage location Njdpezd Dlijfx Ah Sjcu Auction information

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit Ncjdpfx Ajzdzmkjh Sju 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: used, Holz Her Sprint 1329 Black Edition Nsdpfx Ajzdzlmjh Sscu Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 18.5" touchscreen control panel, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed fence, 1350 mm MOT Edge magazine, fully automatic for coil and strip material, MOT Gluing station GLU-JET cartridges – hot melt and PU adhesive, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle Press unit 1913 mot., motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of 0-10° bevel on the miter saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius trimming Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end faces, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as anti-static agent at the press unit Infeed area, electronically controlled release agent spray device Press unit, electronically controlled anti-static spray device Outfeed area, electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), Felder TEMPORA F800 Edge Bander Liquids Ncjdpfxozdtlxo Ah Ssu Pre-milling cutters, Glue application via roller, Replaceable tank Pneumatic pre-trimming guillotine Liquids Final trimming blades Up-and-down milling unit Corner rounding unit, Profile scraper Cleaning liquids Flat scraper, Polishing unit, The machine features NC control Max. element height 60 mm, Max. veneer thickness in roll 3 mm, Feed rate 12 and 20 m/min Central lubrication In my opinion, the technical condition is very good. Year - 2019 Inspection and testing on-site is possible. Purchase via leasing is possible.