Em-Tek Ltd

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation Ljdpey Ehrxjfx Ad Ejaa 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, machine/vehicle number: EVE0800220Z700 1Z, BACCI ARTIST.TGV 6-Axis CNC Machining Center, Year 2022 BACCI ARTIST.TGV is a rigid double-table 6-axis CNC machining center designed for the production of chairs, furniture parts, tables, beds, stair components and other complex solid wood or composite elements. The machine features a robust gantry construction, independent TGV working tables and OSAI numerical control with Business PC interface. It is suitable for precise and flexible machining of complex parts in furniture and joinery production. Main technical data 6 interpolated axes X axis: 2600 mm Distance between columns: 2500 mm Y axis: 2200 mm Z axis: 830 mm C axis: ±400° A axis: unlimited Operating head type T2+2 2 electrospindles, double outlet, 7.5 kW, ER32 tool connection Spindle speed up to 18,000 rpm OSAI digital control with Windows Business PC Programming with PITAGORA, ALPHACAM post processor included Power supply: 380 V / 50 Hz Machine configuration 2 independent patented TGV working tables, 900 mm width each Steel TGV supports, prepared for vacuum connection Lodpfey D Uggex Ad Ejaa 2 vacuum pumps, 100 m³/h each 3+3 clamps for jigless work 2 front supports in X direction for jigless clamping 12 vacuum cups 2+2 side reference supports 1+1 front supports Preparation for future turning unit installation UPS for PC Air conditioner for electrical cabinet Tele-service included BCK tool extension included CE safety guarding included Condition Year of manufacture: 2022 Real condition: very good Machine is still connected and can be tested CE certificate available Lightly used, approx. 2000 working hours Programming with PITAGORA, ALPHACAM post processor included Main advantages Rigid gantry frame for stable and accurate machining Double independent table solution for flexible production Suitable for complex 3D machining operations Efficient workholding with vacuum and clamp system Remote service capability Ready for demonstration under power

Condition: like new (used), Year of construction: 2022, HOLZ-HER DYNESTIC 7535 LIFT – Automatic CNC Nesting Machining Center Year of manufacture: 2022 Working hours: 7887 h Availability: October 2026 High-performance CNC nesting machining center, ideal for processing wood panels, derived materials, plastics, and light alloys. Machine equipped with automatic loading/unloading system with lifting table (LIFT version), designed for high-efficiency industrial production. Main Technical Data - Working area: 4600 x 2200 mm - Axis strokes (X-Y-Z): 6195 x 2935 x 565 mm - Max passage height (Lift): 250 mm - Max speed: Vector speed: 128 m/min Axes: X 80 – Y 100 – Z 25 m/min Working Units - 5-axis HSD electrospindle – 13 kW, up to 24,000 rpm - Cardanic head: C axis ±360° / A axis ±180° - Liquid cooling system - ChipControl sensor for spindle protection - 24-spindle drilling unit with integrated saw 18 independent vertical spindles L-shaped configuration (32 mm pitch) - Tool changer with 18 positions (disc type) Software & Control - Complete CAMPUS V7 Plus CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter - 3D simulation BetterSim - Advanced nesting software BetterNest - File import and intuitive programming - 21.5” multitouch touchscreen control panel - Remote service and real-time diagnostics Worktable & Automation - Nesting table with vacuum system - Vacuum pumps: 1 x 500 m³/h 1 x 250 m³/h additional - Automatic LIFT system (AUT 11): Lifting table 4200 x 2200 mm Laser panel detection - Automatic loading (AUT 21): Gantry-mounted system with 4 suction cups - Automatic unloading: Controlled pusher Unloading table with conveyor belt Additional Equipment - 2 independent working zones - Electronically controlled reference stops - Automatic centralized lubrication - TouchLabel PRO labeling system Lsdpfey D Sp Ejx Ad Esaa - Tool measurement system (TouchTool)

Condition: used, Year of construction: 1999, total height: 3,000 mm, total length: 6,400 mm, total width: 4,300 mm, No. 3269 CNC machining center HOMAG BAZ 41/30K Used, year of construction 1999 Lajdpfx Adoy Dtp He Eea Working dimensions: X 3000 mm / Y 1300 mm / Z 250 mm Gluing unit Drilling and milling unit with 4 spindles Flush milling unit Sanding unit Interchangeable air jet Adjustable milling and drilling unit Under-table milling unit Tool changer 12-station turret changer Control system WoodWOP 5.0 Installation dimensions with safety barrier approx. 6400 x 4300 x 3000 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, number of slots in tool magazine: 24, controller manufacturer: TPA Albatros, Equipment: CE marking, documentation/manual, 4-Axis CNC Machining Center - UNITEAM SPRINT 4012-M Very comprehensive configuration suitable for the production of furniture, doors, and windows Year of manufacture: 2003 CE compliant machine No. of controlled axes: 4 Axis travels: X 4870 mm - Y 1840 mm - Z 250 mm - C 360° (for management of angular heads) Max axis speeds: X 85 m/min - Y 85 m/min - Z 25 m/min Working area: 4200 x 1300 mm No. 6 vacuum bar supports with 3 suction cups each No. 4 panel lifting bars No. 6+2 reference stops No. 6 individually disengageable clamps Vacuum pump rated at 100 m³/h Positioning laser Electrospindle: 9 kW (12 hp) - max speed 18,000 rpm - HSK63F interface Dual automatic tool changer (8 positions on head + 15 positions on Y-axis) Angular head: HSK63F with variable tilting Laodpfxsy Dhg Tj Ad Eoa Independent angular head for boring and saw blade with pneumatic tilt 0/8°, 3 kW (4 hp) motor Independent horizontal motor: 5.6 kW (7.6 hp) - max speed 18,000 rpm Boring unit with 14 vertical drills, 2+2 and 1+1 horizontal drills, 3 kW (4 hp) motor No. 2 HSK63F tool holders included Numerical control: TPA Albatros (upgraded in 2018) with remote control panel Automatic centralized lubrication Front safety mats + full perimeter metal fencing User manuals + electrical diagram + CE certificate Installed machine footprint: 7500 x 3800 x 2350h mm Overall dimensions for transport: 13500 x 2400 x 2400h mm Total weight: 5,000 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call. Ledpfx Aey Dcvvsd Ejaa

Condition: good (used), Year of construction: 2010, functionality: fully functional, type of input current: AC, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 160 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,350 mm, number of axes: 4, SCM Z2 Tech 27-C / very good condition, see pictures Net price: €25,990 Gross price: €30,928 Machine has been used by us 4-AXIS DRILLING AND MILLING CENTER Xilog Plus Drilling unit / saw Horizontal boring head Brand: SCM Model: TECH Z2-27-C Year of manufacture: 2010 / approx. 1,000 hours MACHINING CAPABILITIES: Max. workpiece height: 160 mm Max. workpiece length: 2,700 mm In double post: 1,210 mm Max. workpiece width: 1,300 mm Axis movements: Travel X-axis: 3,060 mm, Y-axis: 1,735 mm, Z-axis: 250 mm Maximum traverse speeds (Vector: 60 m/min) MACHINE CONFIGURATION: 6 pneumatic locking beams, e.g., for vacuum cups 120x120 or 55x120 mm For sale to businesses/trade only Buyer is responsible for dismantling and removal/loading Assistance with dismantling available An invoice with VAT shown separately will be issued. Please also see our other offers! Sale without warranty, guarantee, or return Ljdpsy A Tg Aefx Ad Ejaa All information, images and notes do not constitute guaranteed characteristics and serve exclusively for general description. The information is given to the best of our knowledge and belief but cannot be guaranteed. Offer subject to change. Errors, modifications, and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Lasdpfx Adoy A N Uce Eja Working area X-direction: 200 - 3,250 mm Working area Y-direction: 70 - 1,220 mm Working area Z-direction: 12 - 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4-axis Console table 8 supports in X, manually adjustable 3 vacuum suction cups per console Vacuum connection for templates Laser positioning aid for vacuum suction cups Laser projection for positioning the suction cups Liquid circulation cooling Operator terminal Note: Sale does not include the adapters, tools, and HSK holders shown in the images.

Condition: used, Year of construction: 1997, input voltage: 380 V, input current: 20 A, input frequency: 50 Hz, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,325 mm, travel distance Z-axis: 115 mm, number of axes: 3, number of slots in tool magazine: 5, Vertical spindles: 31 pcs (19 along the Y-axis and 12 along the X-axis) Horizontal spindles: 8 pcs Saw: 1 pc Lsdpfoy Azu Iox Ad Ejaa Number of tool holders: 5 Vacuum pump: 100 m³/h

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Suction pads Lasdey Akr Ajpfx Ad Eoa Mounted air-blow nozzle Newly installed control unit Note: The machine has already been dismantled by the manufacturer.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: AA2-002032, functionality: fully functional, operating hours: 9,974 h, overall weight: 7,450 kg, feed length X-axis: 5,020 mm, feed length Y-axis: 1,680 mm, feed length Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 5,020 mm Y-axis travel: 1,680 mm Z-axis travel: 250 mm Number of axes: 5 Software: SCM XILOG MAESTRO Control systems: SCM PRISMA K, SCM TTS System, SCM TecPad, MORBIDELLI TV Matic, SCM PRO-SPACE, SCM RAPID 12, SCM RAPID 24 Lajdpfx Aoy Akgaed Eea Tool changer: 36 positions Drilling units: 24 x vertical MACHINE DETAILS Machine dimensions (LxWxH): 2,400 x 8,000 x 2,400 mm Total weight: 7,450 kg EQUIPMENT - Vacuum pump with 250 m³/h capacity - Liquid-cooled milling spindle

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, number of axes: 5, overall weight: 6,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, I am offering a FANUM CNC milling machine that is ideal for precise machining tasks. This machine is robustly built and features an intuitive control system that makes operation easier. It is perfect for workshops that value accuracy and efficiency. - Brand: FANUM - Type: CNC milling machine - Color: Light grey with blue accents - Control: Integrated display with keypad and keyboard - Working area: Spacious work surface with T-slots Working area: 3000 x 2000 x 750 mm Suitable for wood and plastics - Year of manufacture: 2015 - Location: Poland The machine is in good condition and fully functional, with normal signs of use that do not affect its performance. It has been regularly serviced and is ready for immediate use in your production. Laodpfey Aa Utex Ad Eea The machine can be viewed in operation by appointment. If you have any questions, feel free to contact me.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: approx. 3250 mm Lsdpfx Aeyzzyzjd Ejaa Working area Y: approx. 1290 mm Working area Z: approx. 125 mm Electrospindle with C-axis Vertical drilling spindles: approx. 19 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Groove saw in X direction Tool changer with approx. 14 positions Work table with 6 beams Programming with WoodWop on Windows system Control panel Vacuum pump 90 m3/h Side safety nets Total power: 18 kW

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Ledpfsyzy S Nox Ad Esaa X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 67 kW (91.09 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, Equipment: documentation/manual, ROVER A FT 2231 Ljdoyzxyrepfx Ad Esaa

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Lajdpsyy U S Isfx Ad Eja Total number of tool changer positions: 14

Condition: new, Year of construction: 2026, max. workpiece length 4400 mm profile spindle 1 Stück main drive 19,2 kW Control Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading Laodoyyqm Uspfx Ad Eoa - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Please note that this stock machine is with us in Oberkochen and is already equipped with many useful options. Tools available at short notice on request! Request an offer and see for yourself unbeatable value for money! VIDEO of the machine on request! Below you will find the technical Description of the machine as a PDF document. We would be happy to sell your used machine to a pay a reasonable price! Suitable stationary or mobile suction on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 32 kW (43.51 HP), travel distance X-axis: 2,100 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 400 mm, number of axes: 3, number of slots in tool magazine: 12, controller manufacturer: SYNTECH, actuation type: pneumatic, total height: 2,350 mm, total length: 3,800 mm, total width: 2,560 mm, overall weight: 1,450 kg, table length: 2,100 mm, table width: 3,100 mm, Equipment: documentation/manual, We sell a complete functional nesting CNC with drilling head and the next specs: Ledpfx Aeyyp Eiod Esaa -spindle HSD 12 KW -driling HSD Italia - 9 pc - changing tool with 12 pos - C axes HSD - 10 vacuum areas - 2 vacuum pump

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AL 00 - 647, functionality: fully functional, 5-axis CNC machining center Software: SCM Xilog Plus Operator software: SCM Panel-Mac X = 3470 mm Y = 1240 mm Z = 180 mm 6 cross beams 6 loading aids Rear & middle stop rows Vacuum pump 90 m³/h Vacuum cup positioning with crosshair laser Disc tool changer with 12 tool positions 5-axis milling spindle 360° 11 kW 20,000 rpm Tool interface HSK 63-F Handheld control unit Drilling head X = 7 Y = 5 X horizontal 2 x 2 Y horizontal 1 x 2 Grooving saw with 5-axis milling spindle Safety device "Bumper" Central lubrication Ljdpfx Ajyyb N Tjd Eeaa

Condition: used, Year of construction: 2002, machine/vehicle number: 2880, functionality: fully functional, travel distance X-axis: 4,550 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 500 mm, We offer this used 5-axis machine CMS P.F./132-2TUCU, year of manufacture 2002. Manufacturer: C.M.S. S.p.A. Year of manufacture: 2002 Model: P.F./132-2TUCU Serial number: 2880 The machine is in perfect working condition. Laedsyx S I Dspfx Ad Eoa If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, CNC machining center for drilling and milling operations on wood panels and derivatives, plastics and non-ferrous alloys. Working area X - Y - Z: 3685 - 1508 - 150 mm Continuous worktable Lateral and frontal reference stops Pendular working mode 2 independent working areas allowing simultaneous machining of 2 identical, mirrored or different parts Lodjywxc Sopfx Ad Eoaa Five-sided machining of the workpiece “Gantry” structure 4-axis milling unit, HSD brand Tool holder: HSK F63 Max rotation speed: 24,000 rpm Inverter 10-position tool magazine on the head Max tool diameter: 215 mm Max tool weight: 4 kg BiesseWorks software Easy programming File import capability Control panel / remote console Teleservice and video diagnostics: real-time support Automatic guide lubrication Vacuum pump: 1 x 250 m³/h Centralized suction pipe diameter: 250 mm Safety devices Side protection strips for the unit Safety photocells instead of mats Perimeter guards with access door Compressed air consumption: 400 NI/min Operating pressure: 7–7.5 bar Air consumption for extraction: 5300 m³/h Machine weight: 4,600 kg Machine documentation: user and maintenance manual, software manual, spare parts catalogue, electrical diagram, CE conformity declaration.

Condition: used, Year of construction: 2010, machine/vehicle number: APK208K8, Used machine in good technical condition, last used in June 2025. Requires inspection and maintenance. Laodpfx Ajywg Rwsd Eoa

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, X working area: 3200 mm Y working area: 1200 mm Electrospindle Vertical drilling heads: 10 Horizontal drilling heads X: 4 Ljdpfx Aoyv Avmjd Ejaa Horizontal drilling heads Y: 2 Grooving saw blade in X direction 16-position tool changer Worktable with 6 beams Software: Biesse Bsolid PICCHIO 2200 vacuum pumps, 90 m3/h Safety mats Protective nets

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Travel Paths: • X-axis: 6170 mm • Y-axis: 1395 mm • Z-axis: 180 mm Machine Structure: • Gantry design with moving machining unit • 10 consoles (ATS) with adjustable vacuum pods • 30 movable support elements • Multi-zone vacuum system (4 working areas along the X-axis) Installation Dimensions: • Machine length: approx. 8850 mm • Machine width: approx. 4020 mm • Working length: approx. 7300 mm Clamping and Vacuum System: • 2 vacuum pumps each with 90 m³/h capacity • Vacuum modules in various sizes (360° rotatable) • Pneumatic clamping systems: • Front stops • Side stops (left/right) • Central stops • Uniclamp clamping units for workpiece thicknesses 40–98 mm • Sensors for recognising lowered stops Machining Units Main Spindle: • Power: 7.5 kW to 12 kW • Speed: up to 24,000 rpm • Tool holder: HSK F63 Drilling Head: • Vertical spindles: • 10 along X-axis • 10 along Y-axis • Horizontal spindles: • 6 along X • 2 along Y Additional Parameters: • Max. drilling diameter: 35 mm • Usable length: 45 mm • Max. projection: 60 mm Tool Change System Turret Tool Changer: • Capacity: 18 tools • Holder: ISO30 / HSK F63 • Max. tool diameter: 200 mm • Max. tool length: 160 mm Additional: • Pick-up changer with 2 positions • Provision for aggregates (e.g., saw units up to Ø 270 mm) Laedpfxoyvz Emo Ad Eea Electrical: • Connection: 400 V / 50 Hz / 3 phase • Power: 22 kW Compressed Air: • Connection: 3/8" • Working pressure: 6 bar • Consumption: approx. 400 NL/min Extraction: • Connection diameter: 250 mm • Air flow requirement: 5300 m³/h • Air velocity: 30 m/s • Pressure loss: 1500 Pa Mechanical Data • Machine weight: approx. 4750 kg Additional Equipment • Automatic central lubrication • Chip conveyor • Air blast device for spindle • Pneumatic pre-installation system • Safety equipment according to Directive 98/37/EC • CNC control (Biesse system)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X working area: 4600 mm Y working area: 1535 mm Z working area: 275 mm 5-axis electrospindle Additional Z-axis support for rear processing units with independent Z-axis Vertical drilling spindles: 29 Horizontal drilling spindles on X-axis: 8 Horizontal drilling spindles on Y-axis: 4 1 grooving saw blade in X direction, diameter 120 mm Chain-type tool changer with 33 positions Pick-up tool changer NC-controlled tool identification system Automatic lubrication system Safety mats XP600 control system, fully PC-based NC-Hops programming system, 1x machine license NC-Hops 7.x Electrical installation, control cabinet, air conditioning Chip conveyor Ledeyvkymopfx Ad Ejaa Vacuum system for 1 vacuum pump 250 m³/h