Schreiner Bartholomaeus

Condition: like new (used), Year of construction: 2021, Felder RL-140 clean air extraction unit with a maximum air volume flow of 2,500 m³/h. Technical specifications: - H3 dust tested - Extraction connection Ø 140 mm - Extraction possible on both right and left sides - Manual chip shaker - 10 m² filter surface area Dujdpfox S I Itsx Abrol - Max. volume flow 2,500 m³/h - Minimal space requirement 1,040 x 898 x 1,940 mm (L x W x H) - From school operation

Condition: ready for operation (used), Year of construction: 2000, Felder RL-160 clean air extraction unit with a maximum volumetric flow rate of 3200 m³/h. Technical data: - Max. volumetric flow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2000 - From a school operation Dusdox S I D Uopfx Abrol

Condition: excellent (used), Mobile extraction unit - 160 mm diameter nozzle - 2.2 kW with adapter and 5 m hose to 140 mm diameter Djdpfx Abjx Srmasrsul

Condition: used, Year of construction: 2012, used extraction unitYear of manufacture: 2012Rated capacity: 2789 m³/hFilter surface: 1.8 m²Max. negative pressure: 1668 PaChip collection volume: 160 lMotor: 1.1 kW, 400 VExtraction port: 1 x 120 mm, 1 x 100 mmAvailability: short-termLocation: Hochheim Dusdjx Rv Dtjpfx Abrjl

Condition: excellent (used), Year of construction: 2016, Clean Air Extraction Unit RL 250 Year: 2016, low operating hours Dujdpsx Ruhwefx Abrjl 5.5 kW motor Pneumatic filter cleaning 250 mm duct connection Filter area: 50 square meters Chip container volume: 2 x 250 liters Dimensions: 2640 x 1200 x 2260 mm Weight: 785 kg

Condition: used, Year of construction: 2016, Available after installation of suction nozzle: left Suction nozzle diameter: 300 mm Nominal airflow: 5100 m³/h Max. airflow: 6000 m³/h Filter area: 28 m² Cleaning: pneumatic jet cleaning Extinguishing unit: powder extinguisher Chip disposal: 4 collection containers Collection volume: 495 liters Filter material: polyester needle felt Negative pressure at Vnenn: 3100 Pa Negative pressure at Vmax: 2500 Pa Installation: mobile Dimension: 3210 mm Motor power: 7.5 kW Electrical connection approx.: 400 Volt/50Hz Storage location: Dujdpfx Abox Rdm Nerjl

Condition: like new (used), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, machine/vehicle number: DED000302, type of input current: three-phase, negative pressure: 2,950 Pa, total height: 2,500 mm, total width: 1,030 mm, total length: 2,650 mm, volume flow: 5,500 m³/h, overall weight: 760 kg, input voltage: 400 V, extraction nozzle diameter: 250 mm, noise level: 73 dB, input current: 10 A, power: 5.5 kW (7.48 HP), rotational speed (max.): 3,000 rpm, input frequency: 50 Hz, We are selling a Höcker Polytechnik extraction system, model "Vacumobil VT250-L", year of manufacture 2023. Only 5 operating hours! The unit was used exclusively with our edge banding machine in the showroom and is in 100% working condition. The chip collection containers have never had to be emptied, as the machine was operated only minimally. ▪ Suitable for installation directly in the working area (depending on dust type) ▪ Low residual dust content < 0.1 mg/m³ (H3) in accordance with TRGS 553 ▪ 100% utilization of thermal energy through air recirculation ▪ Large discharge volume of 3 or 4 tonnes ▪ Online filter cleaning available (at additional cost) ▪ Height less than 2.5 m Dujdpfx Absx N Tb Herel ▪ PLC control, standard with automatic start and text display ▪ Drive with IE3 efficiency class ▪ Optimized filter cleaning ▪ Integrated automatic fire suppression system ▪ Certified back-pressure flap integrated ▪ No explosion venting required for St1 dusts ▪ BG-certified filter material (separation efficiency 99.95%) ▪ Low energy consumption and high extraction performance The machine is available for immediate collection. No known defects. Warranty has expired.

Condition: used, Year of construction: 2006, Used, in excellent condition Low operating hours Ex-government unit Manufacturer: Alko Model: Power Unit 300 P Year of manufacture: 2006 Clean air unit / negative pressure GS dust certified CE type tested Motor 7.5 kW Duedpex Nqvhsfx Abrsl Connection diameter 300 mm Pressure 2,400 Pa Airflow 6,000 m³/h Collection drums 900x600 mm Filter area 30 m² Automatic/pneumatic filter cleaning Filter pressure monitor Soundproofed Integrated extinguishing system Original price approx. 19,545 EUR Space required approx. 3,000x1,058x2,361 mm Weight approx. 880 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, filter area: 28 m², negative pressure: 2,700 Pa, total height: 1,965 mm, total width: 900 mm, total length: 3,600 mm, volume flow: 8,500 m³/h, overall weight: 900 kg, nominal flow rate: 7,130 m³/h, noise level: 70 dB, power: 11 kW (14.96 HP), rotational speed (max.): 3,000 rpm, Extraction system Manufacturer: Spänex Model: SMU Year of manufacture: 2021 Mobile wood dust extraction / chip extraction system Airflow: 8,500 m³/h Rated airflow: 7,130 m³/h Maximum sound pressure level: < 70 dB Negative pressure: 2,700 Pa Motor: 11 kW, 400 V, 50 Hz, 3,000 rpm Extraction connection on the right Suction nozzle Ø 355 mm Filter area: 28 m² 3 chip containers of 165 liters each in the extraction unit Dujdsx Ncd Djpfx Abrol with 3 spare containers (total 6 containers of 165 liters each) Machine dimensions approx. 3,600 x 900 x 1,965 mm (LxWxH) Weight: 900 kg

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Dusdpex I N A Defx Abrsl Height: 3600 mm Depth: 1100 mm Bag length: 200 cm Filter sleeve diameter: 140 mm Number of filter sleeves: 54 pcs Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included

Condition: used, Year of construction: 2017, Design of intake nozzle: right Intake nozzle diameter: 350 mm Rated air flow: 6927 m³/h Max. air flow: 8600 m³/h Filter area: 35 m² Cleaning: pneumatic – jet cleaning Extinguishing system: powder extinguisher Chip disposal: 4 collection containers Collection volume: 495 liters each Filter material: polyester needle felt Negative pressure at rated flow: 3100 Pa Negative pressure at max. flow: 2000 Pa Installation: mobile Approx. weight: 1100 kg Motor power: 15 kW Power connection approx.: 400 Volt/50Hz Storage location: Dsdpfx Ajx Iv S Esbroul

Condition: used, Used unit Motor 400 V / 750 W with filter cloth Duedpfx Abjx H U Ntersl Capacity 100 l mobile Availability: short-term Warehouse location: Flörsheim

Condition: used, Extraction unit Holzkraft ASA1103, good condition, standard equipment, 1.5 kW, 50 kg Price subject to change, errors, misprints and typesetting mistakes excepted. Dusdpfx Aex H Uglsbrel

Condition: used, Year of construction: 1996, Inlet diameter: 160 mm. Nominal air volume flow: 1900 m³/h. Max. air volume flow: 2050 m³/h. Filter area: 9.2 m². Filter cleaning: shaker motor. Chip disposal: 1 collection bin. Collection volume: 200 liters. Filter material: polyester needle felt. Vacuum at nominal flow: 2580 Pa. Installation: mobile. Motor power: 3 kW. Electrical connection approx.: 400 V/50Hz. Storage location: Duodpsx Hwqtofx Abrol

Condition: used, Year of construction: 2010, Intake nozzle diameter: 200 mm Max. air flow rate: 2,789 m³/h Filter area: 1.8 m² Cleaning: Manual Chip disposal: Bag Collection volume: 160 liters Filter material: Polyester needle felt Negative pressure at Vmax: 1,670 Pa Installation: Mobile Approx. weight: 43.5 kg Motor power: 1.1 kW Power supply: 400 Volt/50Hz Storage location: Dusdpfx Ajx Hwqmebrsl

Condition: used, Year of construction: 2025, As-new demonstration unit! List price €8,200, including control panel (operator side), pressure regulating valve LR 1/2. The key design features are: galvanized steel sheet construction; space-saving due to compact design; ATEX-compliant; FSA-tested for pressure shock resistance; low energy consumption with high performance thanks to high-efficiency clean-air fan fitted with special impeller; two large-capacity collection containers with liner bags, collection volume 350 l; high operational safety and extended service life due to BGIA-tested filter bags; compressed air pulse cleaning (‘jet’ cleaning) with time-dependent control for filter surface regeneration; Alpha control system with automatic start (slide control available for a surcharge); connection cable, 5 m long, with plug; residual dust content in exhaust air below 0.1 mg/m³; passed GS-H0-14 "GS-H3" test. Suction nozzle arrangement: left. Rated air flow*: 1,447 m³/h; max. air flow: 1,900 m³/h. Negative pressure at interface (at rated air flow): 3,500 Pa; (at max. air flow): 2,700 Pa. Filter surface: 10 m². Suction nozzle: 160 mm. Motor – fan: 2.2 kW, 400 V, 50 Hz, IE3. Collection volume: approx. 350 liters. Compressed air connection: 1" (on-site). Sound pressure level: 72.0 dB(A). Dimensions (L x W x H): 1,840 x 1,020 x 1,990 mm. Location: Dedpfxex Hwqgo Abrjul

Condition: used, Year of construction: 2025, New display machine! Powerful dust extraction unit according to DIN 8416 for the extraction of processing machines, suitable for installation in the working area outside explosive atmospheres. Key design features include: - Robust, galvanized steel sheet construction - Space-saving, compact design - Delivered ready for operation - Low energy consumption with high performance due to clean air side high-performance fan with special impeller Duodpfx Absx Hwp Asrjl - 2 large-volume collection containers with insert bags - Collection volume approx. 350 l - High operational safety and long service life through filters certified by the German employers' liability insurance association - Motorized filter cleaning device with automatic control and runtime addition - PLC control with automatic start (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Manufactured according to DIN 8416 - Residual dust content in the exhaust air under 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" testing Technical data: Suction nozzle arrangement: left Nominal airflow rate*: 1,450 m³/h Max. airflow rate: 1,950 m³/h Vacuum at the interface*: - at nominal airflow: 3,200 Pa - at max. airflow: 2,700 Pa Filter area: 10.3 m² Suction nozzle: 160 mm Nozzle height, approx.: 1,500 mm (centered) Fan motor: 2.20 kW, 3x400 V, 50 Hz Shaker motor: 0.12 kW, 3x400 V, 50 Hz Pre-fusing: 16 A (on-site) Sound pressure level: 73.0 dB(A) Weight, approx.: 365 kg Dimensions (L x W x H): 1,648 x 1,012 x 1,990 mm * Required specification according to GS-HO-07 at 20 m/s and loaded filter bags (beech test dust). In delivery condition and under practical conditions with coarser dust, the suction performance is significantly higher. Location: Rieth

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, input voltage: 380 V, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Dujdpfx Abox Hi Rxsrol Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3257 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Duodpfx Abox Hi H Hsrel Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Mobile extraction unit Spänex Mobil - 380 Volt - 0.75 kW Dusdsx E Dc Tjpfx Abrel - 120 mm Ø suction connection - 1440 m³/h air flow rate

Condition: used, Year of construction: 2015, Suction nozzle diameter: 300 mm Rated air flow: 5087 m³/h Air flow monitoring: differential pressure indicator Filter area: 32 m² Residual dust content: less than 0.1 mg/m³ Chip sack volume: 4 x 131.5 l Filter cleaning: pneumatic Motor power: 7.5 kW Dsdpfsx Eltgjx Abrsul Extinguishing system: yes Machine length: 3689 mm Machine width: 1590 mm Machine height: 2555 mm Weight: 967 kg

Condition: used, Year of construction: 1997, intake connection: 200mm Maximum volume flow: 3200 m³/h nominal volume flow: 2862 m³/h volume flow: Differential pressure indicator Vacuum: 2336 pa filter area: 16,8 m² Residual dust content: smaller 0,2 mg/m³ SPL: db chip bag volume: l Duedjx Edmvjpfx Abrjl filter regeneration: pneumatic motor power: 4 kW machine length: 2300 mm machine width: 900 mm machine height: 2200 mm weight: 350 kg

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Djdpfx Abox Edmpsrjul Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. POWER UNIT 300P - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l - Includes compressed air cleaning - Includes automatic shutoff system Dusdpfx Ajxz Rg Isbrel

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Motor output 5,5 kW Duodpfxjxzuxne Abrel Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm