Universität Graz

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible. Dwsdpfsxvrvgox Ac Hod

Year of construction: 1987, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible. Dwjdexvddvjpfx Ac Hjd

Condition: used, functionality: unexamined, RAMBAUDI M3 milling machine with DRO. Dividing head. Table 1300 x 300 mm. Travels: X 950 mm, Y 300 mm, Z 450 mm. Spindle ISO40 – 3000 rpm. Dwjdpfx Aoxvcyijc Hed

Year of construction: 2022, condition: like new (used), functionality: fully functional, controller model: CNC-Steuerung, total length: 1,745 mm, total width: 1,877 mm, total height: 2,100 mm, machine/vehicle number: 411546, The Kunzmann milling machine WF 410 M is very rare and has only been used for light-duty work. It is therefore immediately ready for operation. Working area: Longitudinal: 410 mm Dwjdpexvbkgsfx Ac Hod Cross: 350 mm Vertical: 450 mm Main drive (100%/25% duty cycle): 8.5/16.2 kW Speed range: 1–4,500 rpm Tool holder: SK 40 DIN ISO 7388-1 Feed range: up to 5 m/min Display/traverse control: TNC 128 Weight: approx. 1900 kg Clamping surface: 650 x 375 mm T-slots: 5x 14H7 Table load: 250 kg

Condition: good (used), PACKAGE with 5 machines Dwsdpsxvbiijfx Ac Hed automated table

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, LINE GICAMILL S24/6000 gantry milling machine from 1990. CNC NUM 760F. X 6000, Y 2600, Z 1000. Table size 6000 x 2000 mm. Distance between columns 2445 mm. Clearance under crossbeam 1335 mm. Spindle 35 kW, 1620 rpm. Siemens motors. Dsdpfx Asxu U Rwoc Hswd

Condition: used, Year of construction: 2010, functionality: fully functional, Model: ZX 6350 C SN: 1004026 Supplied with the following configuration: - SINO 3-axis digital readout, Model: SDS-6-3V - Milling head rotatable and swiveling +/- 90° - Quill feed operated via cross handle or fine feed with handwheel - Spindle speed range: 40 – 1,750 rpm - Automatic table feed on X-axis - Manual tool clamping vertical/horizontal with M12 drawbar - Manual clamping on all 3 axes - Coolant system - Chip tray - Lighting - Including accessories: (machine vice HP-40) - Technical documentation Dedoxu Uwkjpfx Ac Hjwd - CE-compliant version - Weight: 1,120 kg Technical Specifications: Table size: 280 x 1,000 mm Number of T-slots: 5 pcs. T-slot size: 14 mm Max. drilling capacity in ST37: Ø 30 mm Travels: X-axis: 490 mm Y-axis: 260 mm Z-axis: 460 mm Spindle head (manual): 330 mm Vertical milling head: Quill travel: 120 mm Spindle taper: ISO 30 Motor output: 1.5 kW Spindle speed range: 115 – 1,750 rpm Spindle speed steps: 8 (115 - 230 - 290 - 360 - 580 - 720 - 875 - 1,750) Horizontal spindle: Spindle taper: ISO 30 Motor output: 2.2 kW Spindle speed range: 40 - 1,300 rpm Spindle speed steps: 12 (40 - 60 - 80 - 110 - 150 - 200 - 270 - 380 - 510 - 680 - 950 - 1,300) For horizontal spindle operation, the upper beam with head can be fully rotated +/- 90° on the column. Feeds X-axis: Number of feeds: 8 steps (24 - 40 - 65 - 100 - 185 - 285 - 470 - 720 mm/min.) Min. distance spindle nose to table: 95 mm Max. distance spindle nose to table: 470 mm Dimensions (LxWxH): 1,520 x 1,330 x 2,220 mm Weight approx.: 1,120 kg

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Dwjdpoxu I Atofx Ac Hjd

Condition: ready for operation (used), controller manufacturer: Mazatrol 640, empty load weight: 19,000 kg, total length: 3,274 mm, total width: 8,100 mm, total height: 3,546 mm, Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Dwodpfexuwxqsx Ac Hed Maximale werkstukafmetingen: 3240 x 880 x 640 mm Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 800 mm Travel Z-axe: 585 mm Dimensions clamping space- table: (2x) 750 x 3240 mm Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: max 6000 rpm

Year of construction: 1986, condition: ready for operation (used), Table dimensions X/Y: 1600mm/380mm, max. workpiece weight: 700kg, travel X/Y/Z: 1000mm/420mm/400mm, rapid traverse: 3m/min, power: 11kW/15kW. Machine dimensions X/Y/Z: approx. 2450mm/3300mm/1850mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Dwedpfx Acexuvpho Hjd

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Model NF 8/32 Year of manufacture: 1986 Slot width up to 32 mm Working length up to 6100 mm Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables, holders, milling cutters, coolant system, Dsdpfx Acoxuc N Uo Hswd digital display Weight: 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: ready for operation (used), A conventional universal milling machine H. Ernault Somua is available. Table dimensions X/Y: 1600mm/370mm, travel X/Y/Z: 1000mm/320mm/440mm, spindle taper: ISO50, speed: 2000rpm, power: 7.3kW. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1600mm, weight: approx. 2500kg. The NC display and coolant system are defective. The machine shows an offset of 0.4mm on the X-axis. An on-site inspection is possible. Dwsdpfjxt Rmfex Ac Hjd

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area Dodpext Nzbsfx Ac Hswd - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: good (used), Table length: 2500mm; Module: 20 Dwodpfx Aoxt Nlgjc Hjd

Condition: used, Year of construction: 2023, Maximum sheet thickness 14 gauge Overall length 10' Technical specification: 2023 EFM-1014CNC, 10' x 14 Ga. - Sheet Metal Bending Machine | CNC Folder #7806 ESA CNC control, manufactured in Italy Large 16-inch digital touchscreen display Max. 99 bends per program Memory for up to 2,000 programs Profile library with graphics Programmable radius bending Programmable angle/angle correction 48-inch CNC backgauge with table and fingers Performance Mild/hot-rolled steel, tensile strength 60,000 PSI Stainless steel/cold-rolled, tensile strength 85,000 PSI Soft aluminum, tensile strength 28,000 PSI Closing beam Opening beam 14 Ga. 18 Ga. 10 Ga. / 1/8” thickness 26 Ga. 24 Ga. Dwedpextt Nijfx Ac Hjd Bending length capacity 10'1" Bending angle, programmable 0-135 degrees Bending capacity, mild steel 24 Ga. Bending capacity, stainless steel 28 Ga. Large beam/clamping beam opening 4-7/8" Min. reverse bend 1/2" Max. backgauge table travel 48-3/8" Min. backgauge table distance 1/2" Backgauge repeatability 0.0039" Backgauge table height 35-3/4" Bending beam motor 4 HP, 3-phase, 35 A Wiring: 220 V AC Backgauge servo motor 2 HP, 3-phase 220 V AC Clamping beam motor 1-1/2 HP, 3-phase Wiring: 220 V AC Machine weight: Shipping weight: 9,850 lbs 10,150 lbs Machine dimensions (L x W x H): Shipping dimensions: 168" x 79" x 67" 174" x 80" x 71"

Year of construction: 2011, condition: ready for operation (used), X-axis: 1150mm, y-axis: 710mm, z-axis: 710mm, number of tool positions: 32, rapid traverse/feed rate: 30m/min, working area height: 2578mm, tool holder: SK40, accuracy: 10μm, speed: 18,000/min, drive power 40% ED: 28kW, control: Heidenhain iTNC 530, power connection: 80A, connected load: 48kVA, length: 4228mm (including rear wall and chip conveyor), width: 3458mm, total height: 3256mm, chip conveyor height: 965mm, weight: 10.5t, operating hours: 30,521h, spindle hours: 15,386h. With Zeroclamp 12 pots 138 (zero-point clamping system). An on-site inspection is possible. Dwjdpfx Aoxtpqvjc Hed

Condition: used, 1 pc CNC milling machine SHINRI ZK5140C-3 with machine vise, tool cabinet and various accessories, as shown in the pictures and subject to inspection, self-dismantling. Color: blue. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 1/Enclosure. Shipping: Collection by buyer only - Shipping is not offered for this item! Dwsdjxrcbfjpfx Ac Hsd

Year of construction: 1982, condition: ready for operation (used), Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible. Dsdexq Eybspfx Ac Hjwd

Condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, grinding wheel diameter: 100 mm, table length: 330 mm, table width: 110 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of the business. Placing a bid obliges the bidder to collect the machine within the specified period from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Table dimensions: 330 x 110 mm Grinding wheel diameter: 100 mm MACHINE DETAILS Dimensions & Weight Dsdpexqnuhjfx Ac Hewd Dimensions (L x W x H): 800 x 650 x 1,500 mm Weight: 200 kg

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 1,000 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 1,900 rpm, machine/vehicle number: 50025, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 19 – 1,900 rpm Dwsdpfexqmpdox Ac Hod MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 900 x 1,600 mm Weight: 700 kg

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 10800 mm Measurements height 3100 mm Machine weight 16000kg This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine. Application Types Dedpfxexp Smfj Ac Hswd Milling

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. Dodpjxp Sk Dofx Ac Hswd De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,150 mm, volledige CNC indexeerfreeskop (2x 2,5°) Dwodpsxpkifsfx Ac Hsd gereedschapswisselaar met 30 posities koeling door spindel Longitudinal travel X-axe: 3600 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm

Year of construction: 1970, condition: ready for operation (used), Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Dsdpfx Aoxph Skoc Hswd

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 10,000 kg, total length: 5,200 mm, total width: 2,900 mm, total height: 2,760 mm, U22 internationale freeskop Dedpfxoxpggmj Ac Hjwd Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2000 x 700 mm Power on spindle: 22 kW Type of millinghead: U22 Admission in millinghead (ISO): ISO 50 Max speedrange: 20 > 4000 rpm