NachhalTick GmbH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, cutting dimensions 4300x4300 mm cutting height 95 mm beam feed with grippers 90 m/min cutting speed up to 150 m/min, infinitely adjustable main motor power 13.5 kW Ihsdpfxoylbdte Afaou scoring saw motor power 2.2 kW blade diameter 350 mm label printer 4 air tables extraction requirement 3800 m³/h external dimensions 6500x7700 mm

Condition: ready for operation (used), machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Feed Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed reverse: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed reverse: 90 m/min Angle Cutting Package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angle accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Ihodpfx Aoyla I Refaeu Required air pressure: 6 bar Compressed air consumption: 120 NL/min Air extraction velocity: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection for chip channel: 1 x 200 mm Extraction connection for pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT - Power Concept - Angle cutting package - Grooving and cut-out package - Automatic ejector fence - Labelling package - Data interface to storage systems Note: Further information regarding the machine configuration can be found in the attached document.

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: Standard 3 TRK 6220A Year of manufacture: 1994 Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Power: 4.4 kW Speed: 4,750 rpm Two small notches in the rear area of the saw blade shaft. Lower guide for the saw blade guard is missing. Ihodpfx Asyiazvefaju

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Horizontal panel saw Max. panel width: 3800 mm Isdsyh Nfzjpfx Afaehu Max. panel length: 3200 mm Max. main blade projection: 80 mm Max. cutting height: 70 mm 9 clamping grippers 4 front support tables

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Iedpfx Afeyhnmgoashu Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Control: VISIOLINE with PIOS Professional V2.0.0.x Labelling package incl. label printer

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 0-240-75-0703, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, NEW PRICE ONLY 79,900 EURO!!! Price valid only until February 28, 2026! Don't miss this opportunity! Isdpfjygyvdox Afaohu Background: HOLZMA has been part of the HOMAG Group since 1987. In March 2017, HOLZMA Plattenaufteiltechnik GmbH was renamed to HOMAG Plattenaufteiltechnik GmbH, streamlining the brand under the slogan ‘one company, one brand’. Within the HOMAG Group, HOLZMA stands for precision in panel cutting. The brand’s panel saws (SAWTEQ series, formerly HPL) are renowned for their reliability and form the backbone of furniture manufacturing, combining high performance with advanced automation. We invite you to purchase a NEW and outstanding HOMAG SAW-TEC B-400 Pro Line panel saw, extended version, equipped for automatic storage handling. Offered saw is BRAND NEW. Purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The machine was only started up by the Homag service team— it has never been used since. Both the model and the Homag brand are benchmarks in the industry, regarded globally as leaders in cutting-edge, premium machinery. Our unit is exceptionally well-equipped, featuring virtually every option available. A basic version of this saw costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended, automatic-storage-compatible model with additional features is valued at about 190,000 EURO net (807,500 PLN net)*. Advantages - High throughput enabled by automatic loading and extended saw blade projection. - High efficiency requiring relatively little floor space. - Engineered for optimized material flow and precise logistics. - Ready for integration in networked production environments. We maintain direct contact and support with HOMAG, should the saw require on-site installation and commissioning for the new owner. In our opinion, the discount we offer—over 45% off the new price—represents an unrivaled value for buyers seeking a modern, automatic-storage-ready saw, or even for customers who do not yet need automated storage, future-proofing their investment and saving up to 90,000 EURO net (approx. 400,000 PLN net)*. Of course, the saw can also be operated independently of an automated storage system. General notes regarding this offer: - The machine is BRAND NEW but manufactured in 2020; thus, no warranty or guarantee is provided. - No returns are possible. - The price in the advertisement is exclusive of VAT (23% for Polish buyers), which will be added to the invoice—please check how we present the price in the listing. - Single owner. * 1 EUR = 4.25 PLN. Welcome to all prospective buyers. We are property owners and developers in Poland, building houses and apartments in Warsaw (Poland's capital). All listed machines are our property, largely acquired as settlements from tenants in the furniture industry. We know their history and technical condition, consistent with our descriptions. We remain in direct communication with manufacturers (Homag, Otto Martin, OMC Machinery, FANUM) for maintenance support. Since these machines are surplus to our needs, we offer them at very attractive prices, especially considering they are essentially unused. Assistance with transportation across Poland or the EU is available. We invite you to inspect the equipment prior to purchase.

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 4,300 mm, cutting depth: 4,300 mm, This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information. Ijdpsygw Auofx Afaehu • Main motor power: 9 kW • Optimized travel speeds of the main saw via additional frequency converter • Automatic electronic clamping detection for detecting panel corners • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment • Label printer

Condition: good (used), Year of construction: 2007, We offer for sale a very well-maintained HOLZ-HER 6210 panel saw center. Ihodpfxsydn Rqs Afaeu The machine has been inspected, regularly serviced, and is in excellent technical condition. 🔧 Basic specifications: • Cutting dimensions: 4250 × 3850 mm • Overall machine dimensions: 6636 × 4420 × 1980 mm • Main motor: 11 kW • Scoring motor: 2.2 kW • Manual mode, EasyPlan, cut optimization ⚙️ Construction: • Robust frame and precision linear guides • Stable and precise operation even with large formats 🚚 Delivery and service: • We provide turnkey delivery of the machine, including: • Transport • Installation • Calibration • Operator training • We also ensure the supply of spare parts, consumables, lubricants, and regular maintenance.

Condition: used, Year of construction: 2003, TECHNICAL DATA SHEET 1. General Information Ijdpfjydimaox Afaehu Manufacturer: SCHELLING Anlagenbau GmbH Country of Origin: Austria Machine Type / Model: FX-H 430 / 400 Machine Number (Serial No.): 220.047 Year of Manufacture: 2003 Machine Condition: Used / Second-hand 2. Application Primary Application: Plywood cutting Material Type: Plywood sheets and wood-based panels Cutting Type: Straight panel cutting, industrial panel sizing 3. Electrical Specifications Supply Voltage: 400 V Frequency: 50 Hz Phase: 3-phase (3~) Rated Current: 40 A Installed Power: 21 kW 4. Mechanical / Functional Characteristics Machine Category: Industrial cutting machine Construction: Heavy-duty industrial steel frame Drive System: Electric motor-driven cutting unit Control System: Siemens components (to be confirmed) 5. Safety & Compliance CE Conformity: Applicable (documentation to be confirmed) Safety Features: Emergency stop, protective guards

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg Iodeyc Sggspfx Afajhu EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: excellent (used), Year of construction: 2007, - Working area: 4400x4400 mm Ihsdsycic Eepfx Afaou - Diameter: 72 mm - Main saw: 7.5 kW - Scoring unit: 1.1 kW

Condition: good (used), Year of construction: 2008, functionality: fully functional, Used Panel Dividing Saw MAYER PS 2 Z - Year of manufacture: 2008 - Processing dimensions: 4300 x 2200 mm - Immediately available - Rear lifting table with powered heavy-duty rollers Iedpfx Ajx Tcymofaohu - Electronic pusher unit - All roller conveyors and air cushion tables included - Ideal for bundle cutting

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 220.242, functionality: fully functional, saw blade diameter: 350 mm, cutting length (max.): 4,300 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Ihodpfsx Sqpmjx Afasu Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), Year of construction: 2008, Machine Data Holzma HPP 230 43/43 Cutting length: 4300 mm Cutting width (program fence travel): 4300 mm Roller rail element: 10 lanes, 1 piece Roller rail (element, 2 lanes): 5 pieces Clamping grippers: 6 pieces, first 3 are 2-finger; others are 1-finger air cushion tables: 4 units, 1800 x 650 mm Central blower: 1 unit Technical Data: Saw blade projection: 75 mm Saw carriage feed: forward 1–120 m/min, reverse constant at 120 m/min Program fence speed: forward and reverse 80 m/min (EU limited to 25 m/min forward) Automatic cutting height control; pressure beam height control Ihjdpox Sp Sasfx Afaju Angle alignment device, min. pressure width 0 mm; max. pressure width equals full cutting length Main saw motor: 7.5 kW with pneumatic saw stroke Scoring saw motor: 1.1 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value: 13 kW Power Control CADmatic 4 – Practive control system Optimization software SchnittProfit Practive for Office Labeling package including label printer

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (program pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping Jaw System Combi profile rail element, 2-track: 9 pieces Clamping jaws: 7 pieces Iedjx Nf E Repfx Afaehu Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Air cushion table nozzle manifold: 70 x 70 mm Feed and Program Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed backward: constant 130 m/min Program pusher speed forward: 80 m/min Program pusher speed backward: 80 m/min

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift cut size: 4,300 mm x 2,200 mm Panel size for lift table feed, max.: 4,300 mm x 2,200 mm Panel size for lift table feed, min.: 1,200 mm x 400 mm Stack Heights Stack height of lift table, floor-level installation, max.: 560 mm Stack height of lift table, pit installation, max.: 780 mm Lift table load capacity, max.: 4 t Roller Rails Roller rail element, 10-track: 1 pc Roller rail element, 2-track: 6 pcs Clamps Spacing: 75/275/475/1,075/1,825/2,625/3,425 mm Ihodpfx Afjx Nf Eqsaeu Extraction and Air Cushion Tables Extraction device position: 2,375 mm Air cushion table with rollers, 2,160 x 800 mm: 1 pc Air cushion table with rollers, 2,160 x 650 mm: 3 pcs Central blower: 1 pc Air cushion table nozzle pipe: 70 x 70 mm

Condition: not inspected (used), Year of construction: 1993, power: 11 kW (14.96 HP), cutting width (max.): 4,300 mm, saw blade diameter: 400 mm, cutting length (max.): 4,260 mm, cutting height with scoring (max.): 105 mm, Equipment: scorer, Machine including Laweco conveyor lines with lifting device, load capacity 5,000 kg, platform size 4,100x2,100 mm. The machine comes from a company liquidation. Iodpox Iuzxefx Afaohu

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Ijdpfjx Ebzdox Afajhu Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 Ihedjx Aqdcepfx Afaju 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: good (used), Year of construction: 1983, functionality: fully functional, power: 5.8 kW (7.89 HP), input current: 9 A, saw blade diameter: 300 mm, total width: 1,200 mm, space requirement height: 2,700 mm, space requirement length: 5,200 mm, Striebig Vertical Panel Saw Manufacturer: Striebig AG (Switzerland) Model: 5220 A Year of manufacture: 1983 Machine type: Vertical panel saw / vertical saw Version: Manual Technical Data Saw Unit Iedsx Af Amepfx Afajhu Speed: 4,750 rpm Motor & Electrical Motor power: approx. 5.80 kW Connection: 400 V / 50 Hz / three-phase Dimensions & Weight Machine footprint (W x H): approx. 520 × 270 cm (= 5,200 × 2,700 mm) Weight: approx. 750–850 kg Additional Features Robust industrial design Suitable for chipboard, MDF, OSB, laminated timber, coated panels Proven Striebig quality

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Iodexy Ng Rspfx Afajhu Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, operating hours: 1,200 h, Panel dividing saw Holzma HPP 380 Profiline with automatic labeller. Iodpfx Afoxytlkoashu

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Panel saw Giben Prismatic 2 SPT H.100 with rear loading Ihsdpjxyq I Nsfx Afaou Year of production: 2003 Technical condition: very good Technical details: 4500 mm wide rear loading panel saws with 7 panel feed clamps, side lay-down, 4 air cushion tables of 1300x500 mm and one of 2000x500 mm. Cutting height 100 mm

Condition: used, Year of construction: 1999, machine/vehicle number: 00103, functionality: fully functional, input voltage: 380 V, cutting height (max.): 110 mm, saw blade diameter: 400 mm, total length: 7,500 mm, total width: 6,600 mm, total height: 1,700 mm, overall weight: 7,700 kg, cutting length (max.): 100 mm, compressed air connection: 7 bar, cutting height with scoring (max.): 90 mm, feed length X-axis: 4,800 mm, feed length Y-axis: 4,800 mm, feed length Z-axis: 100 mm, Panel saw with a cutting length of 4500 mm, equipped with a rear table for panel loading. The machine is operational and will be disassembled due to installation of a new machine. Ihjdpfx Afoxwqlpeasu

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Panel saw Holzma HPP 22 Year of manufacture: 1997 Technical condition: good, machine fully operational Ihodpfxoxvybqj Afaju Technical data: - Maximum panel size: 4200 x 200 mm - Saw blade projection: 140 mm - Cutting length: 4300 mm - Installed power: 26 kW