Biovela Group

Condition: used, An automated acid hydrolysis system for fat determination with 6 sample positions is offered. Sample configuration: 3 chambers with 2 tubes each. Degree of protection: IP20. The system is designed for automated acid hydrolysis for fat determination. The process takes place in an enclosed room. Inspection possible by prior arrangement. Gjdpfxjz Sr I Hj Aipjuh

Condition: used, A mechanical eccentric press is offered. Mechanically operated press ram. Worktable with T-slots and a central through opening. Operating mode selector switch for single stroke and continuous stroke. Control panel with on/off pushbuttons. Emergency stop switch. Indicator light. Foot switch with protective cover. Side-mounted compressed air service unit. Protective guard in the press area. The machine features a heavy-duty press frame and a worktable for mounting dies. The press area is accessible via a hinged protective guard. Inspection possible by prior arrangement. Guedpfjz Sr I Tex Aipoh

Year of construction: 2004, condition: used, A complete dental CAD/CAM system with a dental milling machine, 3D dental scanner, CAD/CAM software and extensive accessories is offered. The system consists of a DCS PRECIMILL M4 dental milling machine and a DCS PRECISCAN D4 scanner. Inspection possible by prior arrangement. Godpjz Sr Ndefx Aipouh

Condition: used, Year of construction: 2006, A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement. Godpfxjz Sr Nkj Aipjuh

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Gjdpsz Sr Nqsfx Aipsuh

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Gusdpez Sr Nwefx Aipjh

Year of construction: 2005, condition: used, Main spindle bore: 42mm, rated voltage: 400V AC, rated current: 45A, connected load: 26kW, control: Siemens SINUMERIK 840D/PCU50, length: 3400mm, width: 1400mm, height: 1750mm, weight: 2.5t, operating hours: >100,000h, spindle hours: 48,348h, with FMB Turbo 5-42 bar feeder, documentation and service reports, regularly maintained, an on-site inspection is possible, available from March 2027. Godpoz Sr N Djfx Aipeuh

Year of construction: 2015, condition: used, Table dimensions: 1250x800x1200mm, connected load: 4kW, length: 1000mm, width: 1850mm, height: 1600mm, with documentation, no maintenance has been carried out, an on-site inspection is possible. Gjdpfx Aiez Sr N Rjpsuh

Year of construction: 1996, condition: used, There are two Arburg ALLROUNDER 220S 250-60 available, connected load: 39kW, an on-site inspection is possible. Gusdpez Sr Rbefx Aipeh

Year of construction: 1998, condition: used, There are five Arburg ALLROUNDER 270C 300-80 available, year of manufacture: 1x 1998, 2x 1997, 2x 1994, an on-site inspection is possible. Gjdpfxoz Sr Rho Aipjuh

Year of construction: 2018, condition: used, There are six Arburg ALLROUNDER 320C 500-170 available, year of manufacture: 1x 2006, 1x 2008, 2x 2012, 1x 2013, 1x 2018, an on-site inspection is possible. Guodpfsz Sr Rnsx Aipoh

Year of construction: 1994, condition: used, There are three Arburg ALLROUNDER 370C 800-225 available, an on-site inspection is possible. Gsdsz Sr Ruepfx Aipjuh

Year of construction: 2019, condition: used, There are two Arburg ALLROUNDER 420C 1000-290 GOLDEN EDITION available, year of manufacture: 1x 2011, 1x 2019, an on-site inspection is possible. Gsdpfx Asz Sr Rzeipsuh

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Sheet metal width: 6500 mm Sheet metal thickness: 3 mm Back gauge – adjustable: 1000 mm Dimensions: 7300x2400x2300 mm Weight: 20000 kg Equipment/Accessories: - 1 set of blades Gujdpfxsz Sr Iyo Aipsh - 5 support arms - Protective doors behind the machine - Sheet metal lifting device

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery - Preform buffer silo | Krones | stainless steel hopper with access stairs - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine - Access platform | Krones | steel platform with stairs and railings Condition Gedpfez Sr Imsx Aipeuh Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Available immediately. Location: Germany. Viewing is possible.

Condition: excellent (used), functionality: fully functional, mileage: 153,000 km, first registration: 02/2023, maximum load weight: 1,983 kg, overall weight: 7,490 kg, color: white, driver cabin: day cab, Year of construction: 2023, IVECO NEW EUROCARGO ML80E22P EVI_E E6 MY2015 - Chassis ZCFAH80G102731994 Year 13.02.2023 - EURO 6E Gusdpfsz Sr Igjx Aipjh Engine: Tector 7 (800 Nm) - 6728 cc - 6 Cylinders Common Rail – 220 hp – 153,000 km Transmission: ZF Astronic 6AS 800 TO – Automatic/Sequential Cab: Short MLC-MY 2015, Low Roof - Air Suspension on Rear Axle Body: Color white IC194. Tires: Size 235/75R17.5 SPECIFICATIONS: GVWR: 74.90 tons - Payload: 19.83 tons - Wheelbase: 4185 mm TRUCK EQUIPMENT: Air Conditioning, ABS (Anti-lock Braking System + Electronic Stability Control), AEBS, Towing Version with Rockinger Tow Hitch, ADR Preparation, ADR Disconnect Switch (Cab Only), Immobilizer, Cruise Control, Hill Holder, Lane Departure Warning System (LDWS), Engine Brake with Retarder Function, Heated Urea Tank, Power Steering, Electric Windows, Sunroof, Central Locking, LED Daytime Running Lights (DRL), Fog Lights, High Comfort Air Suspension Driver's Seat, Air Suspension and Heated Passenger Seat, Electric and Heated Mirrors, Sun Visor, Spoiler BODY: FIXED BODY WITH DROP-SIDE – Usable dimensions approximately 615 * 2.50 m (height 2.45 m) - Sliding posts TAIL LIFT - Brand: DAUTEL - Serial number: DSN22-05243 Lifting capacity: 10 tons

Condition: used, mileage: 312,500 km, power: 330 kW (448.67 HP), first registration: 01/2023, fuel type: diesel, color: blue, gearing type: automatic, Equipment: ABS, air conditioning, central locking, cruise control, had accident, parking heater, Special equipment | Axle load - measuring device | Equipment package: Safety | Airbag, driver's side | Driver assistance system: Distance control | Air horn | Driver assistance system: High beam assist and cornering lights | Suspension: Front springs 7.5 t, 2 leaves | Sliding roof, electric | Upper comfort bunk, narrow | Fuel tank: Combination tank, aluminum - 790 liters diesel + 120 liters urea solution (AdBlue) | Fuel tank: Additional tank 480 liters, aluminum, right | Cool box / refrigerator | Engine brake, reinforced | Rain sensor | Key with remote control | Driver's seat, sprung comfort seat | Cab: L ClassicSpace, 2.30 m, tunnel 170 mm | Cab variant: ClassicSpace | Cab floor with engine tunnel 170 mm | Cab: Width 2.30 m | Cab: Height 600 mm | Cab variant: L | Suspension: Leaf spring / air suspension | Power windows | Speed limiter (cruise control) | Air conditioning | Lower comfort bunk | Engine 12.8 liters - 330 kW R6 diesel (OM 471) | Wheelbase variant 3700 mm | Co-driver's functional seat | Water pump, regulated | Central locking with remote control | Permissible total weight 18.00 t | Auxiliary heater (water) | Secondary oil retarder | L cab BigSpace, 2.50 m, tunnel 120 mm | Tires, tubeless, 315/70 R 22.5, front / front axle / rear axle | Tires, tubeless, 315/70 R 22.5, rear | Requirement: FleetBoard Manager App | Lower comfort bed | Colors & Interior | Paint color: azure blue | FRONT RIGHT ACCIDENT DAMAGE (see pictures) Sale exclusively to commercial businesses, excluding any warranty. Gjdpsz Sr Iasfx Aipeuh

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz Guodpfxez Sr H Nj Aipjh - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: excellent (used), Year of construction: 2008, overall weight: 1,038 kg, Semi-automatic band saw for mitre cuts with high cutting accuracy. This machine allows for stepless 90° cuts, as well as mitre cuts to the right and left up to 30° (60°). Standard equipment of the machine: - Sturdy welded construction of the saw arm enables low-vibration sawing. - Hydraulically controlled lowering speed of the saw arm - Hydraulic clamping of the material - Hydraulic cutting pressure regulation (solid material – pipe) - Electrical belt tension monitoring with saw blade breakage control - Carbide saw blade guides and guide rollers - Coolant pump with dual supply to the saw blade guides - Driven chip brush - Bi-metal saw blade M 42 Guodpfxjz Sr H Ae Aipjh Cutting ranges: 90° 440 or 610 x 440 or 610 x 440 45° R 440 or 500 x 190 or 360 x 440 45° L 440 or 510 x 180 or 460 x 390 30° R 330 or 330 x 170 or 170 x 440 30° L 350 or 350 x 170 or 330 x 310 - Drive power: 3.0 KW // 400 V // 50 Hz - Belt speed: 19 / 46 / 65 / 90 m/min - Saw blade dimensions: 5200 x 34 x 1.1 mm - Dimensions: 2600 x 850 x 1420 mm - Weight: 1038 kg

Condition: used, Year of construction: 2020, INTERMAC VERTMAX 3.3 – Year 2020 Maximum sheet size that can be machined: 6000 x 3300 mm Minimum sheet size that can be machined: 500 x 300 mm Machinable glass thicknesses: 4 - 26 mm Suction cup carriage speed: 80 m/min Gsdpfx Aisz Sr Hpspjuh Y-axis speed: 40 m/min Speed of glass feed on input and output roller modules: 30 m/min Electrospindle power: 1 x 9.5 kW (S1), 1 x 6.5 kW (S1) Maximum spindle rotation speed: 12000 rpm Maximum diameter of the front grinding wheel: 150 mm Maximum diameter of the rear grinding wheel: 100 mm Maximum drill diameter: 80 mm Tool coupling: ISO 40 Tool magazine capacity: up to 18 + 19 positions Maximum power consumption: 63 kW Working direction: Left to Right Operating hours: 2302

Condition: used, mileage: 45,898 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, empty load weight: 2,391 kg, maximum load weight: 1,109 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,932 mm, loading space length: 3,272 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior lining, wooden loading floor, L2 chassis length, right-hand mirror with electric adjustment, H2 roof height, air suspension seat, high roof, touchscreen, partition, accident damage, heat-reflecting glass, clock & tachometer, brake pad indicator, active headrest, 3-door, 1st owner, Euro 6e, green environmental badge (4), inductive charging for smartphones, steel rims, rear-view camera, black, passenger airbag, sliding door on the right, navigation with color monitor, color monitor for navigation system, shift paddles, parking assistance camera, parking assistance sensors rear, parking assistance sensors front, traction control, electric windows (2), seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wood trim, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, country version Germany, further equipment available, errors and prior sale excepted, trade-ins possible, financing possible, please contact us, we will prepare a customized offer for you. Nationwide delivery possible. A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable in inclination and height, CT1 vibration damper, D03 high roof, D50 continuous partition, E07 hill-start assist, E1B storage compartment for smartphones incl. wireless charging, E1D digital radio (DAB), E1E navigation, E1U USB socket 5 V, E46 socket in the cab, E57 electrical system for trailer socket, E7M MBUX multimedia system, ES5 charging package instrument panel, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF4 storage compartment above the roof lining, FF5 storage compartment above the windshield, FJ1 folding cover for storage compartment, FJ4 storage compartment under the cockpit, FZ5 anti-theft alarm system, G43 9G-TRONIC, H15 seat heating for Gsdpoz Sr Hiefx Aipouh

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00731, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Gjdpfxsz Sr Hcj Aipouh Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: like new (used), Demo Konica Minolta AccurioPress 6120 for Sale Key Specifications: Gedpfx Aiez Sr E Sjpouh Print speed: Up to 120 pages per minute (A4) Print resolution: 1,200 × 1,200 dpi Printing: Black & white Paper sizes: Up to SRA3 Paper weight: 40–300 gsm (up to 350 gsm with compatible optional paper feeders) Automatic duplex printing High-capacity paper handling: Up to 18,000 sheets with optional configurations Condition: Demo machine Total print count: 23,524 If you are interested in the machine or have any questions, please feel free to contact me.

Condition: used, Used, two-story modular building system from the manufacturer ALHO, consisting of classrooms, sanitary facilities, and exterior staircases. Manufacturer: ALHO GmbH Year of construction: 2005 Design: Two-story modular building Number of modules: 19 Floors: 2 Total length: approx. 30.14 m Total width: approx. 17.82 m Gusdpoz Sr Exsfx Aipeh Previous use: School building Room layout: Classrooms, corridors, sanitary facilities, and utility rooms Sanitary facilities: Several WC rooms on the ground floor Windows: Plastic windows Heating: Radiators in the rooms Lighting: Ceiling lights Ceilings: Suspended grid ceilings Electrical installation: Sockets and cable ducts Access: Exterior steel staircases with railings Documentation: Floor plans for the ground floor and upper floor available Condition: Used, with some damage to flooring and ceiling panels

Condition: used, Year of construction: 2015, functionality: fully functional, INTERMAC CUTTING LINE (2015) INTERMAC GENIUS 37 L.M.A Laminated Glass Cutting Table Max. Dimensions: 3710 x 2750 mm Thickness (Laminated): 33.1 - 88.12 mm Thickness (Monolithic): 3 - 10 mm Speed: 100 m/min Precision: +/- 0.5 mm Power: 12 kW Godjz Sr Efopfx Aipeuh + INTERMAC GENIUS 37 CT Cutting Table for Monolithic Glass Max. Dimensions: 3710 x 2750 mm Thickness: 3 - 19 mm Precision: +/- 0.15 mm Power: 6.5 kW