Pakistan machine

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. Itodjzvcknspfx Afkek The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 1993, condition: used, Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h Additional title: 2-stage heat exchanger Itjdpfsztzckox Afksk Capacity: 600 hl/h Hot water: 750 hl/h Operating pressure: 21 bar Operating temperature: 100 °C Length: 2,15 m Width: 0,95 m Height: 2,15 m Weight: 5000 kg Material: EPDM HT / NBR / 1.4439

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Itjdpoztzbyofx Afksk Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Height: 2000 mm

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Ijdpfx Aozty Hnsfketk Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Ijdpjztmurefx Afkstk

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Parker Nitromatic PSA Nitrogen Production Plant – 600 Nm³/h – 99.5% Purity Itsdjzm E Rfepfx Afksk Description A complete industrial plant for nitrogen production using PSA (Pressure Swing Adsorption) technology, designed for continuous 24-hour operation and the production of high-purity nitrogen for industrial applications. The system incorporates air compression, drying, filtration, nitrogen generation, and storage, supplying up to 600 Nm³/h of nitrogen at 99.5% purity in a fully automatic manner. Technical characteristics: • PSA (Pressure Swing Adsorption) technology • Manufacturer: Parker Nitromatic • Nominal capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum generation pressure: 7 bar(g) • Continuous 24-hour operation • Fully automatic operation • Integrated alarm system • Continuous oxygen analyzer with permanent purity reading • Ultra-dry nitrogen • 10,000-liter nitrogen storage tank Included equipment: Compressed air • 3 Atlas Copco GA90 VSD FF compressors • Power per compressor: 90 kW • Variable speed drive (VSD) • Integrated refrigeration dryer • 2,000-liter compressed air tank Air treatment • High-capacity filtration system • Parker MXS107 adsorption dryer • Air quality ISO 8573-1 Class 1.4.1 Nitrogen generation • 6 Parker NitroSource N2-80P generators • Total production: 600 Nm³/h • Integrated oxygen analyzer • Automatic PSA regeneration system Storage • 6 intermediate 1,000-liter tanks • 1 final 10,000-liter nitrogen tank

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Itsdpfx Afezl Screksk Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L Iodpfezlnb Rex Afketk - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing - One or two air hoses are leaking - A test camera is missing - Shipping is possible for an additional charge.

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model - Ultrasonic generator K5 2000W/20kHz - Shipping available for an additional charge. Itodpfx Aezlchlsfkjk

Year of construction: 2015, condition: new, Unused (NOS) Sulzer industrial agitator for tank mixing, with SCABA-S agitator head, stainless steel shaft, and SEW geared motor. The unit is from 2015 and is in new, unused condition. Manufacturer: Sulzer Pumps Sweden AB Type: SVVT-40 / 40SVV35T-M1 Year of manufacture: 2015 Condition: NOS (unused, stock item) Application: Tank agitator / Industrial agitator Agitator type: SCABA-S Motor power: 1.10 kW Process power consumption: 0.80 kW Mains frequency: 50 Hz Motor speed (n1): 1,500 rpm Output speed (n2): 244 rpm Gearbox manufacturer: SEW-Eurodrive Gearbox type: KAF47 Gearbox design: Helical-bevel gearbox Gear ratio: i = 5.81 Motor adapter: 24FF165 Gearbox mounting position: M1 Flange: Special flange Flange diameter: 340 mm Bolt circle: 295 mm Mounting holes: 8 × Ø22 mm Shaft length: 500 mm Shaft design: Solid shaft Shaft material: Material 1.4462 (LDX Duplex stainless steel) Number of agitator elements: 1 Propeller type: 3SHP1 Propeller diameter: 475 mm Propeller material (hub): Material 1.4462 (LDX) Blade thickness: 4 mm Blade attachment: welded Direction of rotation: right (clockwise) Iedpfx Aszlcfwsfketk Axial force: 244 N Torque: 43 Nm Bending moment: 74 Nm Minimum stiffness of tank mounting: 250,517 Nm/rad Tank medium (design): Vegetable oil Design temperature of medium: 65 °C Paint color: RAL 5017 Y-ring: present Flushing connection: no flushing

Year of construction: 2021, condition: ready for operation (used), Two identical VAG diaphragm check valves are available. Nominal size: DN350, pressure rating: PN10, max. operating pressure: 10bar, max. operating temperature: 50°C, medium: water (1st stage filtrate), face-to-face length: 800mm, flange outside diameter: 505mm, flange thickness: 30mm, bolt circle diameter: 460mm, weight: approx. 280kg. Including two flange-to-flange pipe sections. Both items were only in contact with 1st stage filtrate in a drinking water treatment plant. Documentation available. An on-site inspection is possible. Itodpfx Afjzkvkkokok

Condition: repair required (used), Compressor-Controlled Expansion Vessel Automation, Flamco Flexcon M-K 1600, Used machine Manufacturer: Flamco B.V. (Netherlands) – Premium manufacturer of HVAC and heating system technology Type / Series: Flexcon M-K 1600 (Compressor-controlled expansion automaton) System type: Diaphragm expansion vessel with control unit for heating and cooling systems Itedpfx Aozkbcrofkok Nominal capacity: 1600 liters Condition: Used, Compressor is missing from the vessel Overall dimensions: Technical and operating parameters: Maximum working pressure: 6.0 bar / 10.0 bar (depending on specific model variant, to be verified on nameplate) Maximum system temperature: 120 °C Maximum continuous diaphragm temperature: 70 °C Control / Supply voltage: 230 V / 50 Hz (or 400 V depending on the compressor block configuration) Protection class: IP 54 (Dust and splash-water protected control cabinet) Suitable Application Areas: The Flexcon M-K is a high-performance, compressor-controlled expansion unit specifically designed for pressure maintenance in sealed heating, solar, and cooling systems. Industrial and district heating systems: Precise, fluctuation-free pressure maintenance for large-scale heating networks and thermal stations. Office buildings and public facilities: Expansion volume compensation for central HVAC, cooling, and heating systems. Optimal degassing: The compressor-controlled operation minimizes system pressure drops, preventing bubble formation and reducing pipeline corrosion.

Year of construction: 2018, condition: used, Loma Systems IQ 3+E metal detection conveyor The conveyor drive motor must be connected separately. Ijdpszc N D Ajfx Afketk The machine was previously used in an inline configuration. Year of manufacture: 2018

Year of construction: 2022, condition: used, functionality: fully functional, Solid Fuel Steam Boiler and Accessories- 3 t/hour-8 Bar- Buhar Kazanı ve Ekipmanları Isdpoy R U T Tofx Afketk Types of Solid Fuel : Coal and Pellet Automatic Weighing System for Solid Fuel, Steam Temperature :172 ºC

Condition: like new (used), Zum Verkauf steht ein Posten Edelstahl Prozessschläuche. Gesamtmenge: 63 Stück – Edelstahl geflochtene Industrieschläuche – verschiedene Längen und Anschlüsse – robuste Ausführung für industrielle Anwendungen Die Schläuche stammen aus industrieller Nutzung und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere zeigen guten Zustand. Eine vollständige Prüfung aller Schläuche wurde nicht durchgeführt. Geeignet für: – Lebensmittelindustrie – Getränkeindustrie (Brauereien) – Chemische Industrie – Wasser- und Prozesstechnik – Wartung und Ersatzteile Inklusive mehrere größere / schwerere Schläuche. Sehr interessanter Posten für Industrie oder Handel. Iodpfx Afjy Nf Aisketk Verkauf vorzugsweise komplett. Preis: 690 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: lot of stainless steel process hoses Total quantity: 63 units – stainless steel braided industrial hoses – various lengths and fittings – robust design for industrial use The hoses originate from industrial application and were professionally dismantled. Some units have been checked, several appear to be in good condition. Full inspection has not been performed. Suitable for: – food industry – beverage industry (breweries) – chemical processing – water treatment – maintenance and spare parts Includes several larger / heavier hoses. Very attractive lot for industrial users or resellers. Preferably sold as one lot. Price: 690 € negotiable Location: Slovakia (EU) Worldwide shipping available

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Itjdpfoy Iamtsx Afksk

Condition: used, Checkweigher Mettler Toledo IND560 Scale manufacturer: Mettler Toledo IND560 Ijdpfsyyynbsx Afkstk Equipped with sensor and stop system for checkweighing purposes Machine has been tested for functionality

Condition: new, Zum Verkauf stehen 70 Stück Edelstahl Rückschlagventile. – Material: 1.4408 (AISI 316) – Nennweite: DN15 / 1/2" – Druckstufe: PN63 – Zustand: neu, unbenutzt (Lagerware) Die Ventile stammen aus industriellem Lagerbestand und wurden nie installiert. Geeignet für: – Chemische Industrie – Lebensmittelindustrie – Wasseraufbereitung – Prozessanlagen – Wartung und Ersatzteile Sehr interessanter Posten für Industrie und Handel. Verkauf einzeln oder als Komplettpaket möglich. Preis: 49 € pro Stück Mindestabnahme: 5 Stück Komplettpreis für 70 Stück: 2.800 € Standort: Slowakei (EU) Versand europaweit möglich Iedpfx Aeyxqq Defkjtk For sale: 70 stainless steel check valves – Material: 1.4408 (AISI 316) – Size: DN15 / 1/2" – Pressure rating: PN63 – Condition: new, unused (warehouse stock) The valves originate from industrial stock and were never installed. Suitable for: – chemical industry – food processing – water treatment – process engineering – maintenance and spare parts Very attractive lot for industrial users or resellers. Available individually or as a complete lot. Price: 49 € per unit Minimum order: 5 units Full lot price (70 units): 2,800 € Location: Slovakia (EU) Worldwide shipping possible

Year of construction: 2024, operating hours: 960 h, condition: used, functionality: fully functional, Crusher and Screening Machine Year of manufacture: 2024 Location: 54611 Hallschlag Iedpfx Afeytdgaeketk Application: Designed for the reduction of charcoal undersize material, followed by screening and filling into big bags or, alternatively, pneumatic conveying into silos. The smooth roller mill was originally used for the size reduction of clay. These machines offer a wide range of applications and are capable of handling and processing various materials. Plant components: 1. Screw conveyor 1 2. Screw conveyor 2 3. Screw conveyor 3 4. Crusher (smooth roller mill) and steel frame 5. Tumbler screen and steel frame 6. Elevator 1-3 7. Pneumatic conveyor vessel (“sand sender”) 8. Big bag unloading station 9. Piping for extraction/ventilation 10. Electrical/electronic systems in a container The prices listed in the document reflect our acquisition costs. Individual or complete purchase of components is possible. Prices and further technical details available on request.

Condition: ready for operation (used), Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power. Itodpfxjylzicj Afkek

Condition: ready for operation (used), Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power. Iedpfx Asylzhxsfketk

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Isdpfx Aeylzhrefkjtk

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: Itjdpfx Asyi Ezkefkok - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM Iodpfx Afeyhc T Iskotk - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm Isdpfx Afjygvncekotk Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen.