Stagas MB

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-20-3177, functionality: fully functional, Panel thickness 8 - 50 mm Feed rate 11 m/min Extendable workpiece support ESC electronic control Solid/PVC edge 0.4 - 3 mm Strip and roll magazine Knife for tape separation Jointing cutters 2 x 2.2 kW 12000 rpm Lrodpfx Abjyw Rbgs Esi Infeed fence manually adjustable with SIKU counter Glue pot below. Glue application roller switchable for with/against feed Glue station overhauled and cleaned by service technician in 2025 Pressure station with 1 powered pressure roller and 1 follow-up roller End trimming with 2 motors, swiveling 0 - 12°, 2 x 0.18 kW 12000 rpm Flush/chamfer/radius cutters 2 x 0.27 kW 12000 rpm Pneumatically controlled radius scraper Pneumatically controlled surface scraper Chip collection box Weight approx. 1000 kg Total length 3570 mm Electrical connection approx. 9.5 kW

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. Ledpfx Ajyw Nu Eeb Ejri • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: excellent (used), Year of construction: 2016, I sell the fully equipped edge banding machine IDM Stefani Solution MDR T-ER4S, year 2016: Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Heating lamps Lodpfx Aeyw Aiveb Ejri Edge banding with preheating tank / AirFusion included Material pressure zone servomotoric adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotoric adjustable Corner rounding 4-motor servomotoric adjustable / Multiradius unit Radius R2 scrapers servomotoric adjustable / Multiradius unit Glue scrapers manual adjustable Polishing brushes Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 10-60mm Edge thickness 0,3-15mm Feeding speed up to 25m/min. PUR glue possible. FE-MA-TECH unit included Second glue tank absolutely new included. Only 344.000 meters edgenbanded ! Very good condition, fully working!

Condition: excellent (used), Year of construction: 2011, operating hours: 10,150 h, Manufacturer: BRANDT Model: Ambition 1600 GC Grooving unit Equipment: Pre-milling unit – DIA heads Maximum edge thickness: 12 mm Feed speed: 18 m/min Pneumatic unit Lsdpfx Abjywzc Is Ejri Maximum edge height: 66 mm Glue granulate container Trim saw, 2 motors, straight or chamfered cut End rounding unit, 2 motors Profile scraper Flat scraper Polishing machine Dimensions: Length: 6600 mm Width with grinding disc: 1400 mm Height: 1800 mm Weight: approx. 2900 kg

Condition: excellent (used), Brandt Optimat KDN340 Edge Bander Glue application by roller Tank features exchangeable system (machine is supplied with only one tank) Pneumatic pre-cut guillotine Pressure rollers End-trimming saws Top/bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45mm Max. edge thickness (in roll): 3mm Feed speed: 10m/min Machine length: 310cm Ljdpfxjywwqzs Ab Eeri The machine is well-maintained and in very good condition.

Condition: used, OTT Tornado FÜ + PU PLC control unit with 7" TFT color touch display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit - jointing Fully automatic roller magazine Fully automatic edge band magazine Pneumatic flush trimming 0-3° Flush milling - 12mm Radius milling R-2, R-5 Lrjdeywuvnopfx Ab Esi Chamfer milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof enclosure with central extraction Cleaning set with 4-way spray system, high-precision buffing unit, and glide agent spraying system First delivered in 2006 Machine is WORKSHOP TESTED and in TOP CONDITION Available ex stock Lieboch

Condition: good (used), Year of construction: 2017, On behalf of our client, we offer for sale a Biesse machine approximately 10 years old in good condition. A suitable investment for starting new production with a limited budget. Ljdjywup Ujpfx Ab Eori

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) Lrsdpfx Abeywk Elj Eji EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED Lsdpfx Abeywh Epo Eori First delivered in 2016 Available ex stock Lieboch

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate settings Fully automatic edge magazine for coil and strip material Gluing station: Glue pellets + PUR application Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for coil and strip material up to 3 mm (6 mm) edge thickness Adjustable bevel from 0-10° on the trimming saws Lodpfx Aoywh A Ieb Eori Milling unit, flush milling, radius milling, bevel milling - 15° Scraper unit for bevels and radii Flat scraper unit - finishing Machine is INSPECTED and in TOP CONDITION from a very well-maintained workshop Available from stock in Lieboch

Condition: used, Holz Her Sprint 1317-1 FÜ + PU Lrjdpfxeywhv Uo Ab Esi heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm Lrjdpfx Abjyv Da He Esi - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Lrjdpfx Absyvy D Ie Eei Frequency converter A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Exact configuration on request.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Technical specifications: Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6–60 Edge thickness (mm): 0.4–6 Lsdpfxjyvwk Ss Ab Eeri Feed speed (m/min): 10 Overall length (mm): 4930 Weight (kg): 1420 Equipment: Control system with 15" touch screen Jointing unit with 2 milling heads Edge feed GluJet adhesive application system, 2.3 kW, automatic glue height adjustment, nozzle with sensor Pneumatic pressure unit Pneumatic end trimming unit Diamond cutters left & right with CM technology Corner copying unit with diamond cutters Surface scraper Buffing unit Special features: Extendable workpiece support Motorized pressure bridge adjustment with NC axis via program control Diamond jointing cutters left & right Extraction hoods for end trimming unit MOT 4 multifunction milling unit Pneumatic vertical tracing rollers Pneumatic tilting device for MOT 4 milling unit MOT 2 scraper unit with chip collection box Spray device for infeed and outfeed areas Availability: by arrangement Location: Röllbach

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Lodpfeyvt Exjx Ab Ejri Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Lrsdpfeyvr H Isx Ab Eji Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: excellent (used), Hebrock 3003 Edgebander Well equipped, option to inspect prior to purchase Pre-milling units Zero-joint AirTronic system – glue-free, hot air technology Glue application by roller, Interchangeable glue tank Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids Lrodpfxjyvq Dfs Ab Esi Cut-off saw for final trim Top/bottom milling unit, R1 – R2, pneumatically adjustable Corner rounding unit, pneumatically adjustable Pneumatic flat scraper Maximum workpiece height: 50 mm Maximum edge thickness in roll: 3 mm Feed speed: 10 m/min Very good condition, fully functional Leasing options available

Condition: good (used), Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Lodpfxoyvh Sye Ab Ejri Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: used, Year of construction: 2022, Connected load 7.8 kW, multi-radius blade (R2/R1), surface levelling blade, plastering station, chassis with pneumatic 3-point adjustment, jointing up to 50 mm workpiece thickness, corner milling unit R=2, LED internal lighting, release agent spraying system, cleaning agent spraying system. Storage location: Supplier. Lredpfx Aboyvht Re Eoi

Condition: excellent (used), Year of construction: 2019, I sell the edge banding machine Cormak EBM 200, year 2019. Configuration: Lrodpfxjyu U N Ij Ab Eoi Edge banding EVA glue Radius milling R2 Polishing brushes End cutting saws separated Edge thickness 0,4 - 3,0mm / Veneer edges possible Element height 10-50 mm Top feeding band Total length 2060mm Very good condition, fully working.

Condition: used, Year of construction: 2011, used, in excellent condition, low operating hours Lsdpfx Aeyu U Epsb Eeri Manufacturer: Lange Model: B85K Year of manufacture: 2011 Machine no.: 132 CE type-certified Edge thickness: 0.4 – 3.0 mm Max. workpiece height: 50 mm Min. workpiece width: 75 mm Min. workpiece length: 120 mm Feed rate: 7 m/min Cutting from the coil Cutting unit: 0.2 kW Flush milling - chamfer milling: 2x 0.27 kW Flat scraper Extraction connection D 120 mm Space requirement approx. 2200 x 1130 x 1300 mm Weight approx. 600 kg Total connected load 2.5 kW Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 7,845 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, HOMAG Ambition 2260 Lrodpfeyu S Iusx Ab Eei

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Lredpfx Aoyu If Nsb Eji Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: excellent (used), Edgebander BRANDT Ambition 1220 PRE-MILLING UNITS Glue application by roller Tank features quick-change function (machine is supplied with only one tank) Pneumatic pre-cut guillotine Pressure rollers Finish-cutting saws Top/bottom milling unit R1-R2 (pneumatically adjustable from 1mm to 2mm) Corner rounding unit Profile scraper (pneumatically engaged) Pneumatic flat scraper Max workpiece height: 60mm Max edge thickness in roll: 3mm Max feed speed: 11m/min Ledpfxsyu H Hfj Ab Eeri Machine length: 430cm Machine is well-maintained and in very good condition. Leasing purchase available.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, operating hours: 1 h, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,230 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Authorized FELDER Group Dealer for Albania and Kosovo. We offer this NEW FORMAT4 Tempora F400 45.03L X-motion edgebander, year of construction 2024. Showroom machine only a few meters for testing purposes. It includes 1 year warranty from Felder Group. The machine year is December 2023. It is fully equipped machine, with extra options such as changable gluepot and large digital display (x-motion). We guarantee everything about the machine and we can even provide installation from Felder certified technician that has installed over 100+ Felder Temporas in the region. Feel free to ask for any information. Lrodoyuz I Repfx Ab Eei If you have any questions or need more information, feel free to send us a message or give us a call.