REMIswiss (ibeXtra Sàrl)

Condition: used, Year of construction: 2002, functionality: fully functional, Z-axis travel 400 mm X-axis travel 400 mm Y-axis travel 200 mm Table surface, length x width Fsdpeztq Trefx Amgepk 1020 x 700 mm

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Fpjdpsztp Emofx Amgek Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Fodpfezr D Dnsx Amgepk

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min Fpedpszrh N Usfx Amgek rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS-Steuerung, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled Fodpfjzpypzex Amgspk MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, overall weight: 3,600 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details. - Voltage: 3 x 400 V- Frequency: 50 Hz- Power: 9 kVA- Rated Current: 15.2 A- Additional Equipment: ICS Cool Energy i-Chiller external cooling unit mounted on wooden pallet- Additional Equipment: Standalone operator console terminal with screen, keyboard, and mouse Fpsdpfszpa Abjx Amgek

Condition: good (used), Year of construction: 2015, functionality: fully functional, GF AgieCharmilles CUT 2000 S Wire EDM Machine – Year 2015 – EROWA Tooling Package High-precision CNC wire EDM machine from GF AgieCharmilles in excellent technical condition. Manufacturer: GF AgieCharmilles Model: CUT 2000 S Year of manufacture: 2015 Axis travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm Maximum workpiece size: 750 × 550 × 250 mm Maximum workpiece weight: 400 kg Machine hours: Operating hours: 73,182 h Erosion hours: 16,508 h Technical data: Power supply: 3 x 400 V Machine weight: approx. 3,500 kg Equipment: • Automatic wire threading • CNC control system GF AgieCharmilles • Complete EROWA tooling package included • Multiple EROWA fixtures and clamping elements • Precision EDM tooling and accessories (see photos) Advantages: • Very reliable EDM machine for tool and precision part manufacturing • High cutting accuracy and excellent surface finish • Modern GF AgieCharmilles control system Condition: The machine is in good working condition. Fsdpfxjznyq Ae Amgspk Machine is currently powered and can be inspected and tested under power. Location: Czech Republic Availability: Immediately

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Fodoznttdjpfx Amgspk Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Fsdpfsznkk Tjx Amgspk Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Charmilles Robofil 4030 SI-TW Wire-Cut Electro-Discharge Machine. Serial No. 174621 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Fsdpfxjznkkms Amgspk Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Please Note: this lot has been professionally decommissioned and secured for transit Fodeznkivopfx Amgopk Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Fodpfozncqlex Amgepk Ready for inspection under power.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000S Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Fodezlx A Sspfx Amgopk Available wire diameters: 0.05 – 0.30 mm incl. option KIT 50 Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handheld control box for convenient setup VISION 5 control system 15" LCD color screen, jog shuttle and mouse Incl. AGIESETUP 3D Incl. Conic-Plus option for improved taper Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We will gladly perform an individual test cut. We also offer commissioning and training on-site for this machine.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 220 mm Travel range, Z-axis: 220 mm Maximum workpiece dimensions: 1,000 × 550 × 220 mm Maximum workpiece weight: 750 kg Maximum taper: ±45° / 220 mm Standard taper: 30° Wire diameter: 0.1–0.3 mm Cutting speed: 300 mm²/min Fjdpfxjzlnrcj Amgjpk MACHINE DETAILS CNC control: PC-based multi-processor control Accuracy and surface finish Surface roughness Ra: min. 0.22 µm Measuring resolution: 0.05 µm EQUIPMENT Windows XP Touchscreen

Condition: used, Year of construction: 2003, operating hours: 34,621 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 34621 Std Verfahrwege X 350 mm Fpsdpfx Amozkhltogek Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003

Condition: used, Year of construction: 2003, operating hours: 25,407 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Fjdpfozkhgdsx Amgjpk Working Hours 25407 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, overall weight: 2,640 kg, TECHNICAL DETAILS Workpiece weight (max.): 4,100 kg Travel range, X-axis: 350 mm Travel range, Y-axis: 250 mm Fpedpfszi D Ubex Amgek Travel range, Z-axis: 250 mm Travel range, U-axis: ±45 mm Travel range, V-axis: ±45 mm Max. taper angle: ±10° Max. workpiece dimensions: 820 mm x 680 mm x 250 mm Table dimensions: 700 mm x 480 mm MACHINE DETAILS Machine weight: 2,640 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, Equipment: cooling unit, documentation/manual, Sodick AQ 300 L operating hours: 16906 year of manufacture: 2007-11 linear servo control Fodpfezgu I Tox Amgopk x, y, z 300 x 200 x 200 mm u, v 80 mm wire diameter 0.15-0.3 mm (0.25 mm installed) max. workpiece dimensions 740 x 440 x 200 mm (x, y, z) max. workpiece weight: 300 kg chiller deionization cartridge complete documentation machine is powered on for inspection

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage Fpedpfxjzgt N Ae Amgsk With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module AGIEVISION control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Fpjdpfszgt Ixox Amgek Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Large bobbin kit. Fpodpfx Aezf Akysmgok

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Fpodezcpifopfx Amgek Machine can be inspected while powered on.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Fsdpfozcaxkjx Amgopk Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training.

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Fedpfxjzbimhs Amgspk Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, AGIECUT Excellence 2F Year of manufacture: 2002 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface roughness: 0.1 µm Ra Max. cutting rate in cylindrical cutting: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand box Includes AGIE-Setup 3D Fsdpfxszbbndo Amgopk After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by our technicians. We would also be happy to offer commissioning and training services.