Engimotion

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,854 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, type of input current: three-phase, overall weight: 750 kg, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, feed length X-axis: 380 mm, feed length Y-axis: 284 mm, feed length Z-axis: 380 mm, noise level: 78 dB, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP . Last print was run on 30th October 2026. It is still able to actively print. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units Cjdpfo Ah Hcaox Acfshd 7 x 220L drums of PA12-HR (clean reusable powder feed stock) 1 x Spare Steel 220L Drum to suit Processing Station 1 x Pack of various consumables (print heads,fusing agents, detailing agents, fusing lamps, wiper blades, filters, cleaning rolls) Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract is active until 30/1/2027. The buyer will need to arrange a new service contract and recertification with HP on relocation. That cost is not included in our price. Sand Blaster Cabinet and ATEX Vacuum also available to purchase separately - please ask for details

Condition: used, functionality: fully functional, Year of construction: 2018, Printer was used at research centre but last 5 year after the printer was repaired , there was changed printing head in 2021 and since there the printer was not used much Codpfx As Ah E Nrjcfjhd

Condition: used, functionality: unexamined, Year of construction: 2018, operating hours: 1,270 h, Printer was relocalised to different production plant but was never again installed in new location and new production director Chedpo Ah Edgefx Acfod prefare different 3D printing technology - HP.

Condition: used, functionality: fully functional, machine/vehicle number: 3-1-01699-02-37 (5LM37), Year of construction: 2015, operating hours: 46,537 h, type of input current: three-phase, input voltage: 400 V, input current: 16 A, laser power: 10,000 W, feed length X-axis: 275 mm, feed length Y-axis: 275 mm, feed length Z-axis: 420 mm, power: 10 kW (13.60 HP), We are offering a used 3D Systems ProX 350 3D printer, manufactured in 2015. Type: ProX 350 Manufacturer: 3D Systems Year of manufacture: 2015 DMLS (Laser Beam PBF) - Powder 3D Printing Technology. Materials: Metal (used Titanium) - Ceramic Electrical supply: 3 × 400 V AC + N + PE Frequency: 50–60 Hz Rated current: 16 A Power: 10 kW Rated short-circuit current: 6 kA Cedpo Ahyw Tsfx Acfshd Serial number: 3-1-01699-02-37 Compliance: 21 CFR 1040.10 and 1040.11 Machine sold complete with the following components: -Powder feeding unit -External filter -Vacuum pump -Blower -Recycling unit -Chiller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 199 h, type of input current: AC, input voltage: 240 V, input frequency: 50 Hz, electrical fuse: 10 A, Very good condition with original equipment and tools. Only 200 print hours. Chedpfx Ao Ahyt Tocfjd

Condition: used, functionality: fully functional, machine/vehicle number: 200123013-09, Year of construction: 2018, type of input current: three-phase, overall weight: 1,360 kg, input voltage: 208 V, input frequency: 50 Hz, laser power: 10,000 W, feed length X-axis: 381 mm, feed length Y-axis: 330 mm, feed length Z-axis: 457 mm, We offer a used 3D Systems PROX 500 3D printer, model ProX 500 (132540-00 Rev A), designed for polymers, manufactured in 201. Manufacturer: 3D Systems, Inc. Model: ProX 500 Cjdo Ahq I Ropfx Acfehd Materials: Polymers Serial Number: 200123013-09 Electrical Supply: 208 V AC, three-phase, 50/60 Hz Apparent Power: 10 kVA Weight: 1360 kg Short-circuit interrupting current: 200 kA Electrical Diagram Number: 132508-00 Laser Class: Class 1 laser product; Class 4 laser inside Included option: ProX MQC (2017) S/N 20052303004 Donalson Torit DCE If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: repair required (used), functionality: not functional, machine/vehicle number: 125-00100(L0449), Year of construction: 2015, operating hours: 12,259 h, input voltage: 230 V, input frequency: 50 Hz, laser power: 5,000 W, electrical fuse: 21 A, feed length X-axis: 914 mm, feed length Y-axis: 609 mm, feed length Z-axis: 914 mm, We are offering for sale an industrial Stratasys Fortus 900mc (900mc V0-A-Classic) 3D printer, manufactured in 2015. The machine is sold as is, and requires some work to be put back into service. Technical specifications: Manufacturer: Stratasys Model: Fortus 900mc (900mc V0-A-Classic) Year of manufacture: 2015 Codpfxe Ahp A Ho Acfohd Print head: P5-1 Technology: 3D printing by fused deposition modeling (FDM) Condition: Requires repair Compatible thermoplastic materials: ABS-M30 ULTEM 1010 ULTEM 1010 CG ULTEM 9085 ULTEM BLACK ULTEM 9085 CG To enable the machine to be put back into service, the following work is required: Replacement of the fan. Replacement of the loading bay. The estimated cost of the repairs is approximately €10,000. Additional information: This machine represents an opportunity for an industrial company or a 3D printing specialist wishing to acquire a Stratasys Fortus 900mc that needs to be refurbished. For any questions, requests for additional information, or to arrange a visit, please do not hesitate to contact us by message or by phone.

Condition: good (used), functionality: not functional, machine/vehicle number: 155-11000 (K10170), Year of construction: 2017, operating hours: 3,000 h, input voltage: 208 V, input current: 18 A, input frequency: 50 Hz, laser power: 5,000 W, Industrial 3D printer – Stratasys Fortus 450mc Technology: additive manufacturing via fused deposition modeling (FDM). Year of manufacture: 2017. Compatible materials (thermoplastics): ABS-ESD7 ABS-M30 / M30i ASA Nylon 12 Chsdpfx Ace Ahpf Hefjd PC-ABS ISO / PC ULTEM 1010-CG ULTEM 9085-CG Overall condition and technical information: Machine is functional at approximately 90%. Reconditioning of the spool supports is required. Software version: 6.2.6624.0. Print head number: P2-1. Industrial machine designed for the production of prototype parts, functional parts, and small production runs in technical thermoplastic materials.

Condition: used, Year of construction: 2014, Printing technology: FDM: build process using molten plastic Build volume X × Y × Z: 254 × 254 × 305 mm Layer thicknesses: 0.178 / 0.254 / 0.330 mm Codpfx Ao Ahklujcfehd Model material: ABSplus P430 Support material: SR-30, soluble support material Material supply: Separate cartridges for model and support material Cartridge capacity: Approximately 922 cm³ per cartridge Network connection: Ethernet RJ45 Software: Stratasys Insight for print preparation Power supply (as per nameplate): 100–240 V, 12–6 A, 50–60 Hz Product number: 163-00500

Condition: new, functionality: fully functional, Year of construction: 2026, Industrial SLS for real production work Fuse X1 brings production-scale SLS into a compact industrial system. Its large chamber supports full-size parts and dense batches, while thermal imaging, 13 independent thermal zones and Print Intelligence help maintain stable conditions throughout the build. Large-format builds A 61.5 L chamber provides 7.5 times the build volume of Fuse 1+ 30W for full-size prototypes and dense production runs. Production throughput A 120 W fiber laser and 30%+ packing density are designed to put more parts into each build and increase weekly output. Cedpfo Agcx Rsx Acfjhd Failure prevention Print Intelligence combines computer vision with Adaptive Temperature Control to detect anomalies and protect the rest of a build. Please request current lead time and current pricing. Buy your production system from people who live and breathe SLS. IM3D is not simply a Formlabs reseller. We are an SLS specialist and service-oriented partner with the technical depth to support your system before installation, during onboarding and throughout production. SLS is our field We focus on industrial SLS systems, powders and production workflows, not a broad catalogue of unrelated desktop printers. Maintenance knowledge We know what keeps SLS equipment productive and can help with preventive maintenance, troubleshooting and practical operator guidance. SLS-trained technicians Our technical team understands the complete process, from machine setup and parameter selection to stable day-to-day production. A complete production cell We help configure the printer, powder handling, post-processing, materials and service plan around the parts you need to make.

Condition: used, Year of construction: 2013, Technical specifications: Build volume/build size max: 1,000 × 800 × 500 mm, layer thickness up to 27 microns, high speed: up to 3 base resins, 27 µm resolution, super-high speed: 1 base resin, 55 µm resolution, PolyJet UV technology, 110-240 V, dimensions: 2,870 x 1,960 x 2,105 mm, weight: 2,200 kg; NOTE: The printer was fully overhauled by STRATASYS in 2025, and an upgrade costing approximately €135,000.00 net was installed; additionally, it comes with accessories such as an exchangeable print plate with a mobile lifting frame, various spare parts, and various printing materials. Fully functional condition. The machine is already located at another site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Chodpo Af Nl Rofx Acfsd

Condition: like new (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, input voltage: 380 V, input frequency: 50 Hz, BigRep PRO – Industrial Large-Format 3D Printer | Professional FFF/FDM Printer - Information - (The printer will be inspected and adjusted/configured again by qualified personnel before sale. During this process, it is also possible to update the firmware and software add-ons, thus bringing the printer up to the latest version if required.) - Machine Description - For sale is an industrial large-format 3D printer, the BigRep PRO, manufactured by BigRep. The system is designed for the additive manufacturing of large-volume components, prototypes, functional models, and customized parts. Due to its large-format printing volume, the machine is particularly suitable for companies that want to manufacture large-sized components economically and with a high degree of design freedom. Compared to manufacturing on smaller 3D printers, correspondingly sized components can be manufactured in larger, continuous segments or – depending on the geometry and material – as complete components. The system offers a wide range of applications in industrial product development, mechanical and plant engineering, model making, and the production of jigs, fixtures, and customized plastic components. - Application Areas and Advantages - The BigRep PRO is particularly interesting for the production of large-format plastic components and the flexible production of individual components. Typical application areas are: Production of large-volume prototypes and functional models Manufacturing of housings, covers, and structural plastic parts Production of models for design, architecture, and industrial development Manufacturing of jigs, fixtures, and production tools Development and manufacturing of customer-specific components Chedpfe Afyybox Acfed Small-series production and individual spare parts production Manufacturing of components for mechanical and plant engineering Additive manufacturing enables the rapid implementation of individual designs and offers interesting economic advantages, especially for complex geometries and small quantities. - Sale - The BigRep PRO is offered for sale due to a company restructuring. The machine is suitable for companies that want to expand their capabilities in additive manufacturing or enter the industrial large-format 3D printing market. If you are interested, we are happy to provide further information. An inspection of the system is possible by prior arrangement.

Condition: used, functionality: fully functional, machine/vehicle number: 2919007, Year of construction: 2019, operating hours: 3,300 h, total length: 2,600 mm, total height: 2,700 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 400 W, Equipment: compressor, LM SOLUTIONS SLM 280 – 2019 – 800 HOURS – €60,000 Industrial 3D metal printer for sale – Proxicad Srl, Italy Proxicad Srl is offering for sale an SLM Solutions SLM 280, an industrial machine for the additive manufacturing of metal components, year 2019. The machine is used and is stated to be in perfect working order, with 800 operating hours recorded. The SLM 280 is intended for industrial applications requiring the production of metal components using laser powder bed fusion (LPBF) technology. Key features: Brand: SLM Solutions Model: SLM 280 Year of construction: 2019 Operating hours: 3300 Condition: used, in perfect working order according to the seller Location: Abruzzo, Italy Csdpfx Ace Ad Nypofshd Asking price: €50,000, negotiable

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W Codpfx Ae Adqx Tocfehd - Layer thickness: 110 microns - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. Chsdpfjz U Ap Hsx Acfsd - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Includes material parameters for: - 316L stainless steel (1.4404), - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - Internal sieving device - to be mounted on top of dose chamber - External sieving station QM Powder - for independent inertized sieving process --- Size: 1050 x 995 x 1600 mm --- Weight: 350 kg Chsdpjz T Nc Defx Acfjd --- Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz --- Compatible with bottles and Concept Laser M2 powder containers - Wet vacuum cleaner for powder materials Ruwac NA7-11 - Electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - Stylish storage for 4 powder containers (some containers included with the machine) --- Size: 1150 x 1220 x 870 mm (H x W x D) --- Weight: 250 kg Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank -- Extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H -- Chamber: 350 x 500 x 250 mm (W x D x H) -- External dimension: 840 x 1160 x 1320 mm (W x D x H) -- Weight: 260 kg + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: like new (used), functionality: fully functional, machine/vehicle number: GEADDL-MLAB-G02-900028, Year of construction: 2021, operating hours: 800 h, total length: 1,220 mm, total height: 1,850 mm, total width: 705 mm, type of input current: AC, overall weight: 700 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, laser power: 100 W, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, table width: 90 mm, table length: 90 mm, We offer this showroom Concept Laser Mlab 100R metal 3D printer - Laser Powder Bed Fusion system (LPBF / SLM) Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 100 W singlelaser, 2D optics ScanLab - Build envelope: 90 x 90 x 80 mm - Max. scanning speed: 7 m/s - Focus diameter: 50 μm - Layer thickness: 15 - 50 μm - Connected loads: 1,5 kW; Power supply 1/N/PE AC 230 V, 16 A connector - Inert gas supply: 1 gas connection provided - Ar or N2 (machine was used with argon mostly) - Filtering system: integrated - Dimensions 705 x 1220 x 1848 mm (W x D x H) - Weight: approx. 600 kg Codpsz Tut Ujfx Acfjhd - Operating conditions: 15 - 30°C - Holders for different recoater blades types included - A few stainless steel build plates included Includes material parameters for: - Remanium star CoCr alloy, - Parameters for other materials can be inquired from manufacturer. (316L, 17-4 PH, TiAl6V4, CpTi,...) Machine has been used with remanium star only. It is biomedically clean. Age and condition: like new Machine installed at showroom in 2021 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days. Basically, not more than 5% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers service safety patches and updates until this date have been applied. Machine clock: 800 hours - not a "Laser ON time", that is expected significantly lower. Original price: 100.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator with integrated compressor: Parker HPN2-12500C-E - no need for compressed air + 3.000 Eur - Table sieving station Retsch AS 200 + 1.000 Eur - Isolation transformer - needed if machine is connected to home-grade (30 mA) breaker. + 1.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3315N130, Year of construction: 2015, total length: 995 mm, total height: 1,600 mm, total width: 1,050 mm, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, electrical fuse: 16 A, space requirement length: 3,000 mm, space requirement height: 2,400 mm, space requirement width: 1,200 mm, Misan is Czech authorized reseller for machining centers and metal AM machines. Concept Laser QM Powder - inertized industrial powder sieve: - For Concept Laser / GE Additive / Colibrium Additive M2 powder containers. Also compatible with M1 and Mlab bottles. May be used with another machines with compatible bottles. - Suitable for steel, aluminum, inconel, titanium alloys. - Size: 1050 x 995 x 1600 mm Cjdpfoz Tf Hfsx Acfehd - Weight: 350 kg - Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz - Requires inert gas supply: argon or nitrogen, 5 bars Equipment used by customer. First installed in 2015. Fully refurbished by Misan now (new seals, filters, hoses, overflow bottle,...), clean and functional. New container console. Original price: 25.000 Eur We are awaiting your contact. Video conference can be set up if needed. Sieving station can be seen at our showroom. Visit is possible upon contact.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system is available immediately! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible print cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90% RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90% RH, non-condensing Installation: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Operating weight: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lift system Interchangeable print cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cord Ethernet cable USB stick Operating manual CE marking Print Core AA 0.4 – 2 pieces Chedpfxjz Tf D Dj Acfsd Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, For Sale: EOS IPCM P Transitube powder mixing and feeding system. Mix your SLS powder and feed it to your printer. Commonly used with EOS P770, P760, P730, P700, P396, P395, P390, P3850, P380, P360, P350. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs! Cjdpfx Ajz Scqtjcfjhd

Condition: ready for operation (used), Year of construction: 2023, operating hours: 402 h, total height: 1,065 mm, total width: 645 mm, overall weight: 120 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2023. This FORMLABS Fuse 1 + 30W features Selective Laser Sintering (SLS) technology with a build volume of 165 × 165 × 300 mm. It is equipped with a 30 W Ytterbium Fiber Laser and a 10.1" interactive touchscreen for user-friendly operation. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 + 30W machine we have for sale. Contact us for further details. 4 x Fuse 1+ units available • Technology: Selective Laser Sintering (SLS) • Build Volume (W × D × H): 165 × 165 × 300 mm Codpfx Acsz R Syhefohd • Layer Thickness: 110 µm • Build Speed (20% Packing Density): 0.5 L/h • Laser Type: Ytterbium Fiber Laser • Laser Power: 30 W • Laser Wavelength: 1070 nm • Laser Spot Size (FWHM): 247 µm • Beam Divergence: 3.24 mrad • Galvanometer: Formlabs Custom 3rd Generation • Hopper Capacity: 14.5 L • Connectivity: Wi-Fi (2.4 GHz + 5 GHz) • Connectivity: Gigabit Ethernet (1000 Mbit) • USB Interface: USB 2.0 • Display: 10.1" Interactive Touchscreen • Display Resolution: 1280 × 800 • Power Supply (EU): 230 VAC, 7.5 A, Single Phase • Power Frequency: 50/60 Hz • Material Refresh Rate: 30–50% • Supports Required: No • Laser Safety Class: Class 1 Laser ProductThey all have roughly the same number of operating hoursThey all come with a stand and are equipped with a printer cartridge Optional, not included: • 2 x Fuse Sift Station (Compatible Post-Processing Unit: Fuse Sift) available • Optional Feature: Nitrogen (Inert Gas) Printing • chambers

Condition: excellent (used), Printing process: Polymerization of a photosensitive resin in successive layers. Light source: UV Resin system: Resin vat for photosensitive resin Build platform: 330 x 400 mm Build platform material: Marble Recoater: Present UV head: 1 x UV head Axes: X, Y, Z, V, and R axes V-axis: Lifting system for resin vat Chjdpfxoz Rmipe Acfsd Z-axis: Build platform R-axis: Recoater system Counterweight: Present

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,143 h, travel distance X-axis: 406 mm, number of axes: 3, This 3-axis Stratasys FDM TitanTI T0031 was manufactured in 2004. It features a build envelope of 406 x 355 x 406 mm and is compatible with various model materials including ABS and PC-ABS. The machine includes additional accessories such as an ultrasonic cleaning tank and replacement print tips. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI T0031 machine we have for sale. Contact us for further details. - System Software: v2.4.0- Model Material Compatibility: ABS, ABSi, PC, PC-ISO, PC-ABS, PPSF- Optional Accessories: Ultrasonic cleaning tank unit (Evolution WP / Genosonic), replacement print tips (T12, T16, T-class headworks), cleaning brushes, maintenance tools, heat-resistant safety gloves, Superlube synthetic lubricant, CGS Stage grease, build sheets/pallets (including stacked build trays and fixing accessories in box labeled), additional material canisters (SR-20 Soluble Support, PC-ABS Model BLK, PC_S Support) Cjdjz Nlw Nepfx Acfshd

Condition: ready for operation (used), Year of construction: 2002, operating hours: 852 h, travel distance X-axis: 406 mm, number of axes: 3, Plastic 3D printer manufactured in 2002. This Stratasys FDM TitanTI supports various model materials including ABS and PC, with a tip size of T16. It features an envelope temperature set point of 145 °C and comes with optional accessories such as software, maintenance tools, and a large ultrasonic wash bath. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI machine we have for sale. Contact us for further details. - System Software: v2.4.0p1- Model Materials Supported: ABS, ABSi, PC, PC-ISO, PC-ABS, PPSF- Tip Size Model: T16- Tip Size Support: T16- Envelope Temperature Set Point: 145 °C- PC Material Volume: 1512.53 cm³, 26.76 cm³- PC_S Material Volume: 1512.53 cm³, 857.12 cm³ Codpjz Nlq Nofx Acfehd

Condition: ready for operation (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Internal dimensions of the installation space: approx. 400 × 400 × 500 mm MACHINE DETAILS Chodsz Ilt Hspfx Acfsd Operating voltage: 240 V Frequency: 50/60 Hz Rated current: 6–12 A Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 2,000 mm Weight: 500 kg External reference: Alesco - Lot 1