Oasis Windows (Canada) Inc.

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 3,800 kg, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 180 mm, machine/vehicle number: 122000029, TECHNICAL DETAILS Maximum bar diameter: 180 mm Spindle speed: 6,000 rpm Maximum speed: 20,000 rpm Ledpjzgfvbefx Am Teac MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current draw: 25 A Maximum motor current draw: 20 A Short-circuit strength (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Weight: 3,800 kg

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg Lodpezf I Uwofx Am Tsac New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm Ljdpfx Amozf I Tte Teac handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: used, End mill diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Ledpfxozfk Sfe Am Tsac Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Pneumatic material feed via foot switch Weight: approx. 280 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 S PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS ), • Ability to perform operations on aluminum and PVC profiles, such as channel cutting, drilling, marking, cutting at different angles, etc. • 10 high-speed, air-cooled spindle motors specifically designed for aluminum. • Average axis speeds exceeding 120 m/min. • Precision 3-axis profile clamping station. • Profile feeding capacity of 7 pieces. • Profile processing length: maximum 6500 millimeters / minimum 600 millimeters. Ledpszd Rndsfx Am Teac • Automatic profile length detection feature. • Windows-based, user-friendly interface with easy adjustment options. • Data transfer via USB, online remote monitoring system. • Remote connection support. • 23.8" touchscreen, high-performance display. • Servo-controlled cutting unit that allows for precise cutting between 30 and 150 degrees, with an accuracy of ±0.1 degrees. • Automatic transfer of cut profile waste to a collection cart via a conveyor system. STANDARD EQUIPMENT • Ø550 millimeter saw blade. • Automatic scrap chip conveyor discharge unit. • Barcode printer. OPTIONAL EQUIPMENT • Compatibility with CAM programs. • Optional length. • Belt-type output conveyor. • Safety barrier (sensor).

Year of construction: 2026, condition: excellent (used), machine/vehicle number: 2220024396, Milling machines. Lsdpszdq Uqefx Am Tjac

Year of construction: 2005, condition: good (used), Double-head PVC profile welding machine. Lasdszdqpbjpfx Am Toc

Year of construction: 2015, condition: used, machine/vehicle number: 169 6019, In very good condition. Ljdozdql Aopfx Am Toac

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 6080008264, In very good condition (almost perfect). Lsdpfozdp Rwjx Am Toac

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: LA398, In very good condition. Laodszdp H Ejpfx Am Tjc

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. Ledpezcz Dnsfx Am Tsac “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Number of controlled axes: 4, digital Axis X travel (longitudinal): 6500 mm Axis Y travel (transversal): 1095 mm Axis Z travel (vertical): 800 mm Axis A rotation (vertical rotation): 0° to 180°, continuous Maximum axis X speed: 80 m/min Maximum axis Y, Z speed: 64 m/min Maximum axis A speed: 10,000 °/min Electric spindle power in S1: 7.5 kW, 20,000 Maximum electric spindle speed with standard HSK-F Configurable, independent work areas on the axis 9-position tool changer Lajdpfxjzczwuo Am Toc Jaw positioning Number of standard stops: 4

Condition: new, Year of construction: 2026, VIDEO available upon request – Affordable four-axis profile machining center (X, Y, Z + I – rotary axis for the table) for the automatic 3-sided machining of profiles made of aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speeds: 120 to 24,000 rpm Space requirement, including mobile control panel and rear safety fence: approximately 5.5 m x 3.1 m x H 2 m Lajdpfozcnztsx Am Tjc Weight: approximately 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear work area protection by safety fence with access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Year of construction: 2011, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 18.000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm minimum quantity spraying Autonomous belt tensioner shift 20 pneumatic material clamps Pendulum operation through two light barrier areas Laodpfjzcm A Njx Am Tsc label printers Barcode scanner chip conveyor belt suction Manual control console Spindle in like-new condition (infeed force is approximately 16 kN) Loading is included in the price Weight: approx. 14,000 kg

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09.05.T rev 03, Mecal MC309 Nike. In working order Lodpfx Amszcfrcj Tjac

Year of construction: 2014, operating hours: 9,544 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040735, Machining length max. 7,720 mm without face machining Machining length max. 7,600 mm with face machining Travel range X-axis 7,720 mm, feed rate max. 63 m/min Travel range Y-axis 845 mm, feed rate max. 60 m/min Travel range Z-axis 620 mm, feed rate 60 m/min Swivel range A-axis -90° 0° +90° Machining direction top/front/rear/ (left/right) Positioning accuracy +/- 0.1 mm Spindle power 11 kW; S1, water-cooled Spindle speed Max. 24,000 rpm Tool interface HSK 63 F Laodpfx Asza D Scsm Tec Tool changer automatic Tool storage locations in magazine 8 slots Automatic tool changer for angled head 1 slot Disc milling cutter diameter 120 mm Tool length (from taper) 150 mm Clamp displacement automatic Clamps 8 pieces Operating system Windows Production software EluSoft, EluCAM Compressed air connection 7 bar Electrical connection 400 V, 3-phase, 50 Hz, 25 A Air consumption per minute Approx. 185 l with spray Space requirement L x W x H 11,240 mm x 3400 mm x 2950 mm Weight 8200 kg

Condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material clamps Automatic feed Laodpfoza Aa Ejx Am Toc minimum quantity spraying Weight: approx. 200 kg

Condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material clamps Automatic feed minimum quantity spraying Weight: approx. 200 kg Ljdpoza Aaxefx Am Teac

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6287010291, Elumatec SBZ 682 XXL CNC Machining Center for Aluminium Profiles Available for sale: Elumatec SBZ 682 XXL, a high-performance CNC machining center designed for efficient and precise processing of aluminium profiles. The maximum profile length is 7.5 meters. The 10.5-meter version was offered by Elumatec as an optional upgrade. Key Features: • Up to 8 CNC spindles for milling and drilling operations • 360° machining capability for maximum flexibility • Ideal for aluminium window, door and façade profiles • Profile lengths up to approximately 10.5 meters • Automated loading, clamping and machining processes • High productivity and precision for industrial applications Market Availability The Elumatec SBZ 682 XXL is rarely available on the used machinery market. Most comparable machines currently available are newer models such as the SBZ 686 XXL, which belongs to the same product family and offers a useful reference for functionality and performance. For further information, technical specifications or viewing arrangements, please get in touch. Deutsh Elumatec SBZ 682 XXL CNC-Bearbeitungszentrum für Aluminiumprofile Zum Verkauf steht eine Elumatec SBZ 682 XXL, ein leistungsstarkes CNC-Bearbeitungszentrum für die präzise und effiziente Bearbeitung von Aluminiumprofilen. Die maximale Profillänge beträgt 7,5 Meter. Die Ausführung mit 10,5 Metern wurde von Elumatec als Sonderausstattung angeboten. Hauptmerkmale: • Bis zu 8 CNC-Spindeln zum Fräsen und Bohren • 360°-Bearbeitung für maximale Flexibilität • Ideal für Fenster-, Tür- und Fassadenprofile aus Aluminium • Profilbearbeitung bis ca. 10,5 Meter Länge • Automatisches Zuführen, Spannen und Bearbeiten • Hohe Produktivität und Präzision im industriellen Einsatz Laedpszawt Tefx Am Tjc Verfügbarket Maschinen des Typs Elumatec SBZ 682 XXL sind nur sehr selten auf dem Gebrauchtmarkt zu finden. Als Vergleich können neuere Modelle wie die SBZ 686 XXL herangezogen werden, die zur gleichen Produktfamilie gehören und ähnliche Leistungsmerkmale bieten. Für weitere Informationen oder eine Besichtigung kontaktieren Sie uns gerne. Polski Centrum obróbcze CNC Elumatec SBZ 682 XXL do profili aluminiowych Na sprzedaż oferujemy Elumatec SBZ 682 XXL – zaawansowane centrum obróbcze CNC przeznaczone do wydajnej i precyzyjnej obróbki profili aluminiowych. Maksymalna długość profilu wynosi 7,5 metra. Wersja o długości 10,5 metra była oferowana przez firmę Elumatec jako opcjonalne wyposażenie. Najważniejsze cechy: • Do 8 wrzecion CNC do frezowania i wiercenia • Obróbka w zakresie 360° zapewniająca maksymalną elastyczność • Idealna do produkcji okien, drzwi i fasad aluminiowych • Obsługa profili o długości do około 10,5 metra • Automatyczne podawanie, mocowanie i obróbka materiału • Wysoka wydajność oraz precyzja pracy Dostępność Model Elumatec SBZ 682 XXL bardzo rzadko pojawia się na rynku maszyn używanych. Jako punkt odniesienia można traktować nowsze modele, takie jak SBZ 686 XXL, należące do tej samej rodziny produktów i oferujące podobne możliwości produkcyjne. W celu uzyskania dodatkowych informacji lub umówienia prezentacji prosimy o kontakt.

Condition: used, Year of construction: 2008, functionality: fully functional, Elumatec 130 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Wrench measurement Laedpfsy U Dtqex Am Tjc 8 pneumatic material clamps Light barrier Very good condition

Year of construction: 2003, condition: good (used), Elumatec profile machining centre, model SBZ 130. Laodpfx Aoy Uzy Ujm Toc 8-position tool changer 2 machining zones for shuttle mode Length: 7,200 mm Automatic clamping adjustment

Condition: used, Pneumatic Glazing Bead Saw / Mitre Saw – Elumatec GLS 192/06 – Year 2005 with electronic positioning system for cut length management. Equipped with a protected cutting unit featuring integrated safety systems, electronic control, and a robust structure designed for intensive industrial use. The machine ensures precise machining operations with high productivity and excellent cutting quality. Main Features: Brand: Elumatec Model: GLS 192/06 Application: cutting PVC and aluminum profiles Heavy-duty industrial frame with high rigidity Cutting area protection system Ergonomic and user-friendly controls Suitable for window and door manufacturing Used machine in good working condition Technical Specifications: Blade diameter: 200 mm, 98 mm (45° mitre cut) Blade speed: 2,800 rpm Cutting unit feed: pneumatic Output power: 900 W Power supply: 3/PEN 400 V Frequency: 50 Hz Current: 4.8 A Installed power: 1.8 kW Speed: 2800 rpm Operating pressure: 7 bar Laedpfx Aey Uw Eaom Tec Dimensions: approx. 5100 x 1050 x 1180 mm Weight: 140 kg Ideal for: Window and door production PVC/aluminum frame workshops Precision industrial machining operations

Condition: used, Year of construction: 1994, Profile milling cutter for profile edging (aluminum or PVC) max. disc cutter diameter 300mm with spray system with pneumatic material clamping Ljdpjy Uvflefx Am Tjac with dust extraction port 400 Volt, 80 mm cutting depth, 100 mm spindle length Profile can be adjusted for miter cuts.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Bar loading warehouse Maximum bar length that can be loaded: 7500 mm Bar positioning unit Trolley travel speed: 0-60 m/min Milling unit: 4 electric spindles, 4.5 kW each Tool shank: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Z-axis travel: 350 mm Cutting unit with pneumatic positioning Ledoy Tqabepfx Am Teac Blade diameter: 550 mm Cutting angles: 45° – 90° – 135° Automatic discharge

Year of construction: 2008, condition: excellent (used), functionality: fully functional, - Bar loading warehouse Maximum length of bars that can be loaded: 7500 mm - Bar positioning unit Carriage traverse speed: 0-60 m/min. - Milling unit with 4 electric spindles, 4.5 kW each Tool holder cone: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Lasdpfxjy S E H He Am Tec Z-axis travel: 350 mm - Cutting unit with pneumatic positioning Blade diameter: 550 mm Cutting angles: 45° - 90° - 135° - Automatic unloading