VOSS Fluid GmbH

Condition: used, Gas-fired chamber furnace, high-temperature hearth car furnace without electrical control Industrial furnace, hardening furnace, annealing furnace, muffle furnace, chamber furnace, convection furnace, heating furnace FORNI & FORNI, Type PULSAR 2.7 Serial No. REV, Year of manufacture 2011 Temperature range: max. 1150°C Total internal volume: approx. 3.8 m³ Guodps Aki I Hefx Anwji Usable volume on the hearth car: 2.7 m³ Internal depth: 2,000 mm Internal width: 1350 mm Door width: 1220 mm Internal height: 1440 mm Hearth car insertion width: 1000 mm Heating capacity: 180 kW (gas-operated) Power connection: 400 volts, 50 Hz - Front door for front-side loading and unloading - Front door with electric door locking - Hearth car insertion, car insertion device on swivel casters - Includes two insertion cars (1 inserted in the furnace, 1 extra) - Includes scaffolding material for the hearth car furnace (high-temperature charging rack material for building charging racks) - Level installation on the shop floor - No electrical control cabinet available - Without electrical control, without temperature control Space requirement: Width 230 cm x Depth 340 cm x Height 260 cm Weight: approx. 5000 kg Price quoted in the current condition, without control cabinet, as shown in the picture.

Condition: used, Electrically powered chamber furnace with air circulation, PADELTTHERM (Leipzig), Type 2700/600 Heating furnace, convection chamber furnace, circulation furnace for annealing and stress-relieving Industrial furnace, chamber circulation furnace, electrically heated, with air circulation Chamber furnace, convection furnace, annealing furnace, muffle furnace Year of manufacture 2003 Temperature range max. 600°C Usable internal volume 2.7 m³ Internal width 1500 mm Internal height 1500 mm Internal depth 1250 mm Heating power 81 kW Connected power approx. 90 kW Mains connection 400 volts, 50 Hz, 160 amps (3-phase) Gsdpfx Ans Akh Injweui - Electric lift-up door for front loading and unloading - Lift-up door movement via geared motor - Electrical control with temperature control, located beside - Electrical heating (Zone 1) 40.5 kW - Electrical heating (Zone 2) 40.5 kW - Hot air circulation fan (Zone 1) 3 kW - Hot air circulation fan (Zone 2) 3 kW - Temperature controller PMA KS98, Type 9407 963 00001 - Adjacent electrical control cabinet (W80 x D40 x H200 cm) - Electrical wiring diagram available Space requirement: Width 245 cm x Depth 190 cm x Height 380 cm Transport height: 295 cm (guide and suspension for lift-up door removed) Weight approx. 5000 kg Price quoted for the current condition, including control cabinet, as shown in the picture.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Muffle furnace, Thermconcept KK815/13/S, with an output of 50 kW and a maximum operating temperature of 1,280 °C. The furnace is designed for continuous operation. Gujdpe Aiwf Rofx Anwsi Several units available.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN347467, functionality: fully functional, Chamber furnace, fully overhauled, 12-month warranty -Maximum temperature 650 °C -Internal dimensions W x D x H: 600 x 750 x 600 mm -External dimensions W x D x H: 1250 x 1700 x 1750 mm -Capacity: 250 liters -Nabertherm controller -Pneumatic lift-up door -Heating time to maximum temperature: 90 minutes -1 bottom plate -1 internal plate (3 additional plates available at an extra charge) -Additional thermocouple (batch thermocouple) -Extra 50 mm feedthrough -No exhaust, no controlled cooling -Weight: 650 kg -Power consumption: 20 kW -Documentation, CE declaration -Electrically tested and with current DGUV test report Guodpfx Ano Aivvhewoi The furnace has been overhauled. All contactors and relays have been replaced. Heating elements have been inspected and measured. Very good condition. Inspection by appointment. Furnace, furnaces, muffle furnace, industrial furnace, chamber furnace, firing furnace, sintering furnace, annealing furnace, laboratory furnace, hardening furnace, ceramic furnace.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: AC, temperature: 1,300 °C, inner dimension length: 750 mm, inner dimension width: 350 mm, inner dimension height: 250 mm, total length: 1,400 mm, total width: 1,000 mm, total height: 1,400 mm, overall weight: 330 kg, Equipment: CE marking, El. heated chamber oven Rohde Type: ME 65/13 SG Temperature: 1300°C Current: 29 A Power: 20 kW Voltage: 3/N/PE AC 400 V Frequency: 50 Hz Volume: 65 Liter Interior dimensions (W x D x H): 350 x 750 x 250 mm External dimensions (W x D x H): 1000 x 1400 x 1400 mm Weight: 330 kg Insulation: 2-layer Heating: 3-layer Gedpfxs Aiq Tns Anweui Heating elements: Support tube

Condition: used, Year of construction: 2000, functionality: fully functional, Gas-heated forging chamber furnace from IOB Weinheim, available from company stock. The system features a recuperator, two burners, and an electrically powered lift-up door. Equipment: • PMA KS92 temperature controller • JUMO LOGOPRINT 500 temperature recorder • Siemens SIMATIC S5-95U control system Gsdpfx Ans Aia Umjwoui The existing drawing dated May 18, 2000, has the number 5440-20/0. Drawings, electronic documentation, and photos of the furnace, interior, and control system are available. A warm demonstration can be arranged upon request. Condition and inspection: The machine is functional and can be demonstrated under power by arrangement. To the seller’s knowledge, no defects are known. Availability and pickup: Available immediately. The buyer is responsible for disassembly, loading, and transport. The exact scope of delivery and the pickup date will be agreed upon.

Condition: used, Year of construction: 2019, functionality: fully functional, Sputtering System – Aurion Plant Technology Manufacturer: Aurion Plant Technology System Type: B-VPA-28 Serial Number: 302343 Technical Data and Equipment The sputtering system has a total weight of approximately 7,000 kg and dimensions of 6,217 × 3,500 × 2,100 mm (W × D × H), each without vacuum pumps. The chamber volume is approximately 670 liters. The maximum ambient temperature is 25 °C. The electrical mains connection is with 400/230 V at 50 Hz. The connection power is approximately 100 kVA with a current draw of approximately 125 A. Substrate and Heating System Substrate dimensions: 38 × 31 × 1.08 mm Gujdpfx Ae Ah Tlgenwei Transport pallets: 416.9 × 504.5 mm Capacity: 144 substrates per transport pallet Substrate heating up to a maximum of 250 °C Vacuum and Process Gas System Achievable final pressure: < 1 × 10⁻⁷ hPa Process gas: Argon 2 Bronkhorst F-201CS flow controllers, each with 500 mln/min Coating System 2 DC generators ADL GX 150/800, each with 15 kW Vacuum components (Pfeiffer Vacuum) 4 × Roughing pump DUO 35 2 × Roughing pump DUO 65 2 × Rotary vane pump Okta 500 3 × Turbo pump HiPace 1200 U 1 × Turbo pump HiPace 2300 U Valve technology from VAT Control and Automation Technology The system control is based on a Siemens SIMATIC S7 controller and includes a panel PC with WinCC for operation and process visualization.

Condition: used, Year of construction: 2021, Electrically heated, twin-track tunnel furnace (push furnace) for debinding and sintering of PTC ceramics, manufacturer Riedhammer, type TP12.75/2X20/15-E-145, serial number R5-11-0040, order number RME-21-002610, year of manufacture 2022; usable volume approx. 0.6 m³, furnace length 12.75 m, usable width 2 × 200 mm, usable height 150 mm; maximum operating temperature 1,470 °C, including debinding up to 650 °C and sintering process up to 1,450 °C; electrical heating using Kanthal wire heating elements and SiC heating elements, maximum heating power 360 kW; 19 control zones, 19 load transformers; conveyor plate system with 126 conveyor plates in the furnace, plate dimensions 202 × 202 mm; conveyor speed 126–450 mm/h, furnace cycle time approx. 9–31.7 hours; measuring and control system, electrical connection value 659 kVA, 400 V, 50 Hz, pre-fuse 3 × 400 A; including handling system, manufacturer Theilinger, year of manufacture 2020, machine platform and control cabinets; noise emission below 80 dB(A). Godps Ah Tipjfx Anwjui

Condition: like new (used), Firing base, kiln plate made of cordierite, perforated -Dimensions: L x H x W 500 x 600 mm x 14 mm -Color: white -For use as a support plate/firing plate -Used once for testing Larger quantities available, price depending on quantity! Gujdpfx Aj Ahyawsnwji High-tech fine ceramics, plates for thermal processes, laboratory supplies or for firing ceramics.

Condition: like new (used), Al2O3 feet, system can be stacked as desired. Each 12.5 mm in height. Available only in quantities of 120 pieces per packaging unit. Suitable for the burner plates (see image), stack dimensions 266 x 183 mm. Larger quantities available, price quoted based on quantity! High-tech fine ceramics, plates for thermal processes, laboratory use, or firing ceramics. Guodpfe Ahx U Isx Anwoi

Condition: like new (used), Firing base, furnace plate made of aluminum oxide, available in two versions: - Dimensions: L x H x W 267 x 183 mm x 1.5 mm - Dimensions: L x H x W 267 x 183 mm x 2.0 mm - For use as a support plate or firing plate for small parts, e.g., for ceramic or metallic components (MIM, CIM) Gsdpfxj Ahx T Ae Anwsui - Used once for testing purposes Larger quantities available, price offered based on quantity! Also available as a complete stack (last image)! High-tech fine ceramics, plates for thermal processes, laboratory use, or firing ceramics.

Condition: like new (used), Firing base, kiln plate made of cordierite Dimensions: L x H x W 266 x 183 mm x 5 mm Suitable as a base plate or support plate. Guodpj Ahx Saofx Anwji Larger quantities available; price depends on quantity! Also available as a complete stack (see last image)! High-tech fine ceramics, plates for thermal processes, laboratory equipment, or for firing ceramics.

Condition: used, Year of construction: 2010, A reflow soldering oven with nitrogen operation is offered. Power: 70kW. Nitrogen consumption: approx. 21m³/h. Cooling: 20l/min at min. 2bar. Exhaust air: 400m³/h. Inspection possible by arrangement. Godpfx Ano Ahq Nkowsui

Condition: like new (used), High-tech fine ceramics, plates for thermal processes, laboratory equipment, or for firing ceramics: -Base plate made of cordierite from Kyocera -Support plate made of 1.5 mm thick aluminum oxide from Kyocera -Feet made of aluminum oxide from Kyocera, with a through-hole for precise alignment, can be stacked as desired 1 stack: Length 266 mm x Width 183 mm Free height per foot: 12.5 mm Gujdpe Ahi Aajfx Anwji Larger quantities available, price offer dependent on quantity!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Electric convection oven, France Etuves XXL08, manufactured in 2023, 622 operating hours. The unit can be accessed with a pallet truck or lift table. Approximately 10 mm edge. - Capacity: 8000 liters - Max. temperature: 200°C, can be increased to 250°C upon request - Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm - External dimensions (W x D x H): 2559 x 2578 x 2665 mm - Equipped with the original France Etuves C3030 controller (1 program with 4 steps) or, upon request, with a Jumo controller - Includes exhaust fan - Double door - Heating power: 36 kW - Total power: 39.8 kW - Power supply: 400V, 3-phase, 50 Hz - Weight: 1300 kg - Documentation, CE declaration - Electrically tested and with current DGUV test report We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by arrangement. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, chamber oven, heating oven, chamber convection oven, annealing oven, tempering oven, convection chamber oven. Gsdps Ahixzjfx Anwoui

Condition: used, Hardening furnace, muffle furnace NABER type 31S Machine no. 10604, year of manufacture 1973 Temperature range: approx. 1150°C Internal dimensions (W x D x H): 1000 x 700 x 380 mm Heating power: 42 kW Connection voltage: 400 volts, 50 Hz - Simple temperature control Gedpe Agpf Nsfx Anwsui - Control unit mounted on the furnace - One heating element is damaged Space requirement: Width 170 cm x Depth 200 cm x Height 200 cm Weight: 1550 kg Good condition

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 20307, functionality: fully functional, power: 108 kW (146.84 HP), input voltage: 400 V, input current: 270 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,120 °C, inner dimension length: 3,000 mm, inner dimension width: 450 mm, inner dimension height: 200 mm, total length: 16,800 mm, total width: 1,726 mm, total height: 2,398 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Conveyor belt tunnel furnace manufactured by Mahler. We used this furnace for the annealing of C-steel parts, utilizing 100% Exogas. The control system has already been upgraded, and all necessary maintenance and repair work has been carried out regularly. Inspection is possible by arrangement. Gusdpfx Ae Af Imaonwsi Disassembly and removal will be carried out by the buyer, in accordance with the applicable safety and environmental regulations.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! -Drawers extend via telescopic slides Gusdpfx Anj Aa Aivswei -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm Gsdpsz Tfc Tofx Anwjui -Weight: 87 kg

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Gujdpfx Aez Snfcsnwei Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 200.170, functionality: fully functional, operating hours: 1,000 h, power: 18.75 kW (25.49 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 750 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,500 mm, total width: 1,400 mm, total height: 1,500 mm, overall weight: 400 kg, number of chambers: 1, number of shelf rows: 1, control type: manual, actuation type: electric, Equipment: CE marking, For sale: ThermConcept recirculating oven due to business closure. Very even temperature distribution in the combustion chamber. Manual control with timer. The oven was operated in production at a maximum of 500°C and is in perfect working order. The door seal is in good condition. Guedpfx Ansz Rn Hcewji

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Gjdpfjz Rn Duox Anwoui

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Gusdpfx Anez Rn Dzjwsi

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced. Gusdpfez I Tt Iex Anwei

Condition: used, Year of construction: 1982, power: 36 kW (48.95 HP), input voltage: 380 V, temperature: 950 °C, control type: manual, actuation type: manual, SIMPLON Industrial Annealing/Hardening Furnace (36 kW, max. 950 °C) For sale is a robust industrial annealing furnace from the brand SIMPLON (Albert Baumann Aue/Sa. Industrial Furnace Construction). This furnace is ideal for the thermal treatment, annealing, or hardening of metallic workpieces and is equipped with a solid furnace door that can be manually operated via a lever mechanism. Technical Data & Equipment Details: Guodpfx Ansz Iv H Rewji Manufacturer: SIMPLON / Albert Baumann Aue/Sa. Industrial Furnace Construction Year of Manufacture: 1982 (according to the nameplate "82") Order Number: 12362 Maximum Temperature: 950 °C Connected Load: 36 kW Voltage: 380/220 Volts Control: Integrated analog control panel with a stepped switch and analog temperature display (scale x100 °C). Condition: Used industrial quality with visible signs of wear and superficial rust on the housing, consistent with its age.