Renovators Paradise

Condition: used, Gubish 6-spindle deburring machine. Fjdpfx Aszz Rn Ssi Iogg Also available set of drums for planing, price on request.

Condition: good (used), functionality: fully functional, units span 1350mm two motors 5,5kW feeding from magazine hydraulic feeder Fgodpfx Aiszz Nizj Isg manual regulation of top pressure

Condition: good (used), functionality: fully functional, maximum working width: 600 mm maximum working height: 200 mm sides – interchangeable heads rollers in the table Fgjdpfx Aozz Nihoi Isg manual adjustment of the distance between the side heads smooth feed rate adjustment electric table adjustment multi-blade saw at the outfeed with a 11 kW motor side heads with 6.6 kW motors each total power: 40.55 kW year of manufacture: 1991

Condition: good (used), functionality: fully functional, max working width 530mm max working height 180mm max working height with side heads 170mm changenable side heads rolls in the table manual regulation of side heads Fgjdezz Nibepfx Ai Ieg two feeding speed electric table adjustment weight 2600kg

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm Fgjdpezz Nh Dofx Ai Ijg height of side heads 10cm changenable side heads 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: excellent (used), functionality: fully functional, Min./max. workpiece height: 15-100 mm Min./max. workpiece length: 500-2000 mm Fsdszz Nhkepfx Ai Isgg Min./max. workpiece width: 25-230 mm Feed speed: 5-36 m/min

Condition: good (used), Planer line lumber lift machine feed delivery table stacker Fgjdpfx Aiozz Ik Ds Iog various types of cutters sharpening machines

Condition: good (used), planer model U23E Fedpfx Aezz Iitei Iogg

Condition: not inspected (used), Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Fjdpozz Ai Usfx Ai Ijgg Working height 140 mm Feed motor 4 kW

Condition: excellent (used), Catalog number 8107 TECHNICAL DATA - max. width of workpiece 400mm - max. thickness of workpiece (electrically adjustable) 130mm - digital display of material height Fedpfx Aozzyq Aji Iegg – top: - pressure rollers (for short workpieces) - twisted feed roller - ejectors - planing roller (spiral) 7.5kW - pressure - smooth, feed metal roller – bottom: - infeed table - planing roller (spiral) 5.5kW - 2 sliding rollers in the bottom table - stepless feed speed adjustment 0-10m/min - electrical height adjustment - lifting motor 0.37kW - feed motor 1.5kW - diameter of dust extraction nozzle 2x130mm - central lubrication - dimensions (L/W/H) 2270x1900x1620mm - weight approx. 2100kg ADVANTAGES - spiral rollers - heavy cast iron machine, top and bottom rollers, both with their own motors - pressure rollers that hold the workpiece firmly and evenly, ideal for short workpieces - excellent condition – used planer, not repainted Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Feed rate: 5 - 30 m/min Feed motor: 5 kW Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Fgedpfjzzv Abjx Ai Isg Bottom: 7.5 kW Right: Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: good (used), Year of construction: 1997, Weinig Profimat 23E Fgodpfxezzlpkj Ai Isg Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table length: 2,000 mm Feed motor: 3 kW Spindle arrangement: Bottom: 5.5 kW Right: Left: 7.5 kW Top: 11 kW Bottom: 7.5 kW

Condition: used, Technical specifications: Max. planing width: 230 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom 5.5 kW right + left 11 kW Fedpfx Aezza Ibei Isgg top 7.5 kW Number of steel feed rollers: 4 Number of rubber feed rollers: 1 Diameter of extraction nozzle: 120/140 mm Infinitely variable feed speed adjustment: 6-22 m/min Feed via cardan shafts Lubrication pump for the work table 1 smooth roller in the table Pressure: 6 atm Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1460 mm Height: 1850 mm

Condition: used, Year of construction: 2017, Four-sided planer Manufacturer: WINTER Holztechnik Type: Timbermax 5-23 Year of manufacture: 2017 Technical data - Number of spindles: 5 Fedpfjzy Nx Hex Ai Iogg - Processing range: 20-230 x 8-160 mm - Feed rate: 6 - 36 m/min - Suitable for processing wet wood - Weight: approx. 3,800 kg - CE marked Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 Fgodpfezy Nxtox Ai Ieg 214 KW

Condition: like new (used), Year of construction: 2023, Weinig Powermat 700 (Solid Profile P700) 6 spindle four-sided planer machine * Machine as new, 0 operating hours * 6x Weinig Powerlock with 8000 RPM Bottom - right - left - top - top - bottom Feed speed 5-40 m/min Infeed table 2 meters Axial and radial CNC adjustments for spindles 2, 3, and 5, 6 Radial CNC adjustment for spindle 4 Table surfaces with Marathon coating Automatic Waxilit pump Operating concept Comfort Set Fgjdpfxozy Nvls Ai Isg Powercom Plus

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, working width: 260 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, spindle speed (min.): 7,000 rpm, Weinig Powermat 700 (Solid Profile P700) 6 spindles Fgsdpfx Aozy Nr Hji Isg 260 mm wide 160 mm high 40 mm spindles 7.000 rpm Feed speed 5-40 m/min Bottom 11.0 KW Right + left motor joint motor 11.0 KW Top 11.0 KW Top 7.5 KW Bottom 7.5 KW Radial CNC controlled adjustment and positioning left + top spindles Marathon coating for machine tables and fences (excl. infeed table) 2.5 Meter infeed table Memory Plus operating system

Condition: excellent (used), Workpiece dimensions: Data Workpiece length = 260-3000 mm Working width = 50-230 mm Working height = 10-70mm Cross conveyor table specification: Conveyor length = 2200 mm Conveyor width = 1000mm Adjustable overall height = 810 mm Number of flat crossfeed chains= 5 ( 80mm, 280mm, 500mm, 900mm and 2200mm) Feed speed = 18 m/min Feed motor = 0.75 kW (1 hp) Fgjdezyz Adopfx Ai Isg Accelerator specification: Feed roller width = +/- 50 mm Driven feed rollers = 4pcs (2 top, 2 bottom) Feed motor, hydraulic = 5.5kW Feed roller diameter = 170mm upper and 100 mm lower Infeed speed infinitely variable = 20-140 m/min Max.cycle rate/min. = 60

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed Fgedpfx Aiszyl T To Iog - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers Fgsdpfx Aezx Sv Sji Ijg - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min Fgjdozx Suuspfx Ai Iog - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8060 TECHNICAL DATA - max. width of workpiece: 230mm - max. height of workpiece: 180mm - number of spindles: 5 1) horizontal lower: 230mm, 7.5kW 2) vertical right: 180mm, 5.5kW 3) vertical left: 180mm, 5.5kW 4) horizontal upper: 230mm, 7.5kW - 4 spindles with electric up/down adjustment from the control panel 5) horizontal lower: 230mm, 7.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm – top: - 6 feed rollers, toothed, including 2 double rollers - 2 feed-out rollers, rubber – bottom: Fsdpfxszx Spxj Ai Ijgg - feed roller, toothed, driven, with swivel mechanism in the lower table, in front of the first spindle - 2 pneumatic side pressure rollers - feed-out roller, metal, smooth - all rollers with pneumatic pressure - length of feed table: 2180mm - table adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor approx. 1.1kW - stepless feed speed control via frequency inverter - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 5x150mm - dimensions (L/W/H): 4100x1750x1900mm - weight approx. 3800kg ADVANTAGES – with 5 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 68900 PLN Net price: 16405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of workpiece: 200mm - max height of workpiece: 140mm - number of spindles: 4 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 140mm, 4kW 3) vertical left: 140mm, 4kW Fgodozx Sn Uopfx Ai Ijg 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm – top: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed roller, rubber, double – bottom: - side pressure roller - infeed roller, toothed, driving, angled in the lower bed - side pressure roller - outfeed roller, driving, metal, smooth - all rollers are pneumatically pressed - length of infeed bed: 1600mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed rate adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x140mm - dimensions (L/W/H): 3200x1700x1750mm - weight: 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12357 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - max. width of workpiece 220mm - max. height of workpiece 130mm - 8 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 130mm 7.5kW 3) vertical left 130mm 7.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 220mm 11kW – 5th spindle with electrically adjustable up/down movement 6) horizontal lower 220mm 5.5kW 7) horizontal lower 220mm 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360° 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter – from below: - infeed roller, toothed, pulling, pivoting in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan rollers - rollers with pneumatic pressure - stepless feed speed adjustment + 2 speeds 10-60m/min Fgedszx Rlxspfx Ai Ijg - feed motor 10kW - electric adjustment of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - dimensions of the control cabinet (on pallet) 1020x1000x2230mm - weight approximately 5000kg ADVANTAGES – with 8 heads – universal spindle – ideal for both wet and dry wood – German production, WEINIG brand – unpainted – very few operating hours – used planer, in perfect condition Net price: 125900 PLN Net price: 29976 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations) Fsdpfezx Rkzex Ai Isgg