Atoutcloc

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used, well-maintained radial drilling machine, V-TRADE, model: ZX3840. Isdpfxjz Tdkvo Ad Nebc Drilling capacity in steel: 40mm. Thread cutting up to M30. Spindle taper: MK4. Spindle speed range, continuously adjustable via two gear stages: 50-315/315-2000 rpm. 8 automatic feeds: 0.08-0.5 mm/rev.

Condition: used, 5-ton forklift - All-terrain - Diesel - Validated periodic inspection Year: 2008 Only 2800 hours Validated periodic inspection until September 1, 2026 Lifting capacity: 5 tons Lifting height: 4 meters Unladen weight: 7.6 tons - Maintenance and inspections performed: • Simple axis lubrication completed • Chain tension check: OK • Ready for work / ready for sale - Equipment and benefits: • 2-wheel drive (front) • Diesel engine with very low fuel consumption • Large carriage for very wide pallets Ibsdsz Tdkcspfx Ad Nec • Hydraulic side shift • All-terrain model: ideal on soft ground, dirt, or unpaved parking areas • Does not get stuck • More photos available upon request • VAT recoverable • €17,500 (excluding VAT) - Delivery possible

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Rehm vacuum vapor phase soldering system Year of manufacture: 04/2014 Service recently performed by Rehm in October 2026 Vacuum package Manual loading and unloading of the process chamber in the operator area Air cooling directly above the assembly in the cooling area 1 basic work piece carrier, 650x650mm Automatic Galden filling system (25 kg HS 240) Water-cooled cooling section Ijdpfx Adsz Tdi Ss Nobc Camera for process monitoring

Condition: used, power: 360 kW (489.46 HP), IVECO STRALIS 360 EEV – 2013 580,000 km – mileage increasing. GVWR: 32 tonnes Payload: approximately 17 tonnes 360 hp engine Equipment carrier platform: 9.30 m x 2.52 m Hydraulic winch with remote control, 8 tonnes capacity Ibedpoz Tdi Esfx Ad Nec 2 seats Recent technical inspection, valid until 09/01/26 (clean bill of health) Maintenance history available Truck has been regularly maintained and serviced, with available history. The maintenance history shows numerous interventions over the past 4 years: brakes, tires, gearbox, cooling system, turbo, clutch, sensors, AdBlue/NOx system, electrical system, and winch… No further maintenance costs expected. Truck in good overall condition. Solid platform, no perforations. Some surface rust marks. Price: €45,000 excluding VAT - Available immediately

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Equipment: CE marking, foot remote control, A used, well-maintained hydraulic swiveling bending machine by Dr. Hochstrate. Ibsdpjz Tdixsfx Ad Noc Type: 2500x6mm Bending length: 2500mm Bending thickness in steel up to 400N/mm²: 6mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5381-2013, Year of construction: 2013, load capacity: 1,600 kg, fuel type: electric, battery model: DIN 43535, 3PzS or 4EPzS types, remaining battery capacity: 90 %, battery voltage: 24 V, fork carriage width: 800 mm, fork length: 1,195 mm, turning radius (outer): 1,780 mm, overall weight: 1,540 kg, total height: 4,790 mm, total width: 880 mm, Equipment: pallet forks, Doosan LEDS16IP — 1.6t electric platform stacker General Drive: Electric, walk-behind Capacity (Q): 1.6 t (1,600 kg) Load centre distance (C): 600 mm Load distance (X): 836 mm Year 2013 Serial Number 5381-2013 Ibodsz Tdirepfx Ad Nsc Max. mast height 4,790 mm Unladen weight incl. battery: 1,540 kg Initial lift (h5): 120 mm Overall width (b1): 880 mm Fork dimensions (thickness/length): 185 / 1,195 mm Outer fork spread (b5): 575 mm Aisle width for 800×1200 pallet, lengthways (Ast): 2,520 mm Turning radius (Wa): 1,780 mm Performance Travel speed, laden/unladen: 9.0 / 10 km/h Travel speed, pedestrian/stacking mode: 5 / 3.5 km/h Lift speed, laden/unladen: 0.13 / 0.20 m/s Lowering speed, laden/unladen: 0.49 / 0.23 m/s Gradeability, laden/unladen: 6 / 8 % Electrics Drive motor (AC): 2.3 kW Lift motor (DC): 3 kW Battery: 24V, up to 500 Ah (DIN 43535, 3PzS or 4EPzS types) Max. battery weight: 400 kg Controller: AC pulse control (drive and lift)

Condition: used, functionality: fully functional, load capacity: 350 kg, We are offering for sale two robust and complete industrial mezzanines, ideal for optimizing and creating additional space in a warehouse, workshop, or commercial premises. First mezzanine – 4.5 m × 21.5 m - Height 6 m, i.e., 3 m per level * Dimensions: 4.5 m × 21.5 m * Area per level: 96.75 m² * Installation on 2 levels * Total area: 193 m² * 2 staircases included * 30 mm wooden flooring * Guardrails included * Price: €13,500 excluding VAT - Delivery possible Iedpsz Tdilefx Ad Njbc Second mezzanine – 4.5 m × 17.7 m - Height 6 m, i.e., 3 m per level * Dimensions: 4.5 m × 17.7 m * Area per level: 79.65 m² * Installation on 2 levels * Total area: 159 m² * 2 staircases included * 30 mm wooden flooring * Guardrails included * Price: €11,000 excluding VAT - Delivery possible This set is particularly interesting for warehouses, storage facilities, workshops, offices, or commercial activities, offering a significant capacity for creating additional space without extending the building.

Condition: used, functionality: fully functional, load capacity: 500 kg, 825 m² storage platform + storage unit - 500 kg/m² - MANORGA (FR) Mezzanine, 825 m² platform + storage unit Very nice industrial mezzanine from the MANORGA (FR) brand, in excellent condition, completely disassembled, identified, and palletized for easy and quick reassembly. Main features: Area: approximately 825 m² Dimensions: 32.5 m x 25.5 m Admissible load: 500 kg/m² 30 mm thick wooden floor in very good condition Height under structure (under beam): 3.00 m Column spacing: approximately 5.5 m x 4 m 49 columns, 120 x 120 mm section Guardrails on all 4 sides: approximately 120 linear meters 2 access staircases Approximately 60 neon light fixtures Storage units under the mezzanine: 7 units, see last photo Approximately 150 sandwich panels + 7 high-end, insulated double doors, already disassembled Iedpfx Adjz Tdh Uo Njbc Sandwich panels 3000x1160mm - 65mm thick Several extra pieces included White double-leaf door - 65mm thick Condition and packaging: Entire set in very good condition Disassembly carried out carefully by professionals All elements are numbered Identification and assembly plans provided Set ready for reassembly Stored on pallets Loading onto your truck is free of charge Price: €59,000 (excluding VAT)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, EKRA Serio 5000 screen printer SMEMA interface Single-lane configuration Automatic width adjustment Clima module Camera system (top/bottom) Automatic screen cleaning unit Ijdpsz Tdh Iefx Ad Nsbc Program manager

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, overall weight: 7,000 kg, Equipment: documentation/manual, X-axis travel: 1.400 mm Y-axis travel: 630 mm Ibsdpfx Ajz Tdhued Nec Z-axis travel: 500 mm Table dimensions: 1.800 x 630 mm Max. table load: 1.500 kg Spindle taper: ISO 50 Spindle speed range: 45 tot 2.240 rpm Featured with: - Heidenhain Positip DRO - Vertical/Horizontal milling head - Horizontal milling arbor support - Horizontal milling arbors - Manual spindle quill 100 mm - Coolant system - Machine user manuals

Condition: used, Year of construction: 2020, functionality: fully functional, load capacity per storage section: 500 kg, Mezzanine, 760 m² storage platform Iodpez Tdhnefx Ad Nsbc Very nice industrial mezzanine from 2020, in excellent condition, completely disassembled, marked, and palletized for easy and quick reassembly. Main features: Area: 750 m² Dimensions: approximately 45 m x 17 m (see plan) Allowable load: 500 kg/m² Floor covering: very high-end grating Height under structure (under beams): 4.50 m Height on floor level (on beams): 5.00 m Column spacing: approximately 4.3 m x 5.8 m Condition and packaging: Complete set in very good condition Disassembly carried out carefully by professionals All elements are numbered. Marking and assembly plans provided. Set ready for reassembly Stored on pallets Free loading onto your truck Price: €67,500

Condition: good (used), functionality: fully functional, Equipment: centralized greasing system, emergency stop, foot remote control, Punching power: 70 Ton Punching capacity: ø30 mm in 20 mm steel Throat depth: 510 mm Cutting capacity: 500 × 18 mm flatsteel 130 x 12 mm anglesteel Ibjdoz Tdhhopfx Ad Nsc Featured with: Foot pedals Many punches and tools

Condition: used, mileage: 46,534 km, power: 88 kW (119.65 HP), first registration: 11/2023, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, Total permissible weight: 3300kg Iedpfx Aoz Tdg Red Nsbc

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel Ibedpfjz Tdg Dsx Ad Njc 6.0 mm Aluminium Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Featured with: - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 800 mm, spindle bore: 105 mm, turning diameter over bed slide: 1,100 mm, center width: 1,500 mm, turning length: 1,500 mm, overall weight: 5,500 kg, Distance between centres: 1.500 mm Swing: ø 800 mm over cross slide ø 1.100 mm over bed ø 1.380 mm in gap Spindle bore: ø105 mm Speed: 4,8 - 640 rpm Featured with: - 3-jaw chuck ø 380 mm Ibodpfx Aoz Tdgqsd Njc - 4-jaw chuck ø 500 mm - Clamping plate ø 1100 mm - Moving steady ø 200 mm - Machine user manuals

Condition: good (used), functionality: fully functional, cutting height (max.): 420 mm, cutting width (max.): 420 mm, control type: manual, Equipment: documentation/manual, motor brake, Cutting capacity 90° flat: 420 × 420 mm Cutting capacity 90° round: ø 420 mm Ijdpfx Aez Tdgdjd Nobc Blade speed: Vario 17 – 110 m/min Blade dimensions: 5800 × 38 × 1,3 mm Country of origin: Germany Motor power: 5,5 kW Machine (L×W×H): 300 × 220 × 190 cm Machine weight: 3200 kg

Condition: used, empty load weight: 8,807 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2025, Equipment: ABS, Unladen weight: 8807 kg, permissible total weight: 39000 kg, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tire size: 385/65 R22.5, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle at the front, pallet box, electronic braking system EBS, spare wheel holder (2x), bolted chassis, portal doors, temperature recorder, double-deck EURO pallet with beams, connection plug 1x15 and 2x7 pole, anti-spray, international customs seal, telematics system. You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Iedpfxez Tdf He Ad Nebc

Condition: good (used), Year of construction: 2019, functionality: fully functional, volume flow: 8.64 m³/h, filter area: 120 m², suction capacity: 12,000 m³/h, Equipment: type plate available, Extraction capacity: 6,000–8,640 m³/h Max. fan capacity: 12,000 m³/h Total filter surface: 120 m² Number of filter elements: 12 Operating hours: 2.045 Featured with: - Central welding fume extraction and filtration system - Filter material ePTFE membrane - Automatic compressed-air filter cleaning Iodpfx Aez Tdfyed Njbc - W3 Welding fume class - Touchscreen control - Additional extraction point Country of origin: Germany Motor power: 7.5 kW Machine (L×W×H): 370 × 190 × 280 cm Machine weight: 1.220 kg

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: HN-ALU, DEMAG ALUMINUM overhead crane, span approximately 3x2m Load capacity / lever load: 500 KG - 0.5 tons Technical data of the system: Crane track made of Demag aluminum rails, 180mm The system is delivered complete: Rails, travel units, end plates, cable carrier, etc. Includes a 500kg Kito chain hoist. The crane is disassembled and immediately available. Very good condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Ibedpfx Aez Tdftod Noc Demag KBK1, KBK2 and KBK3 rails are in stock! Demag KBK systems are also available. Load capacity 125KG - 1600KG. Please inquire about your crane track with overhang load and dimensions.

Condition: as good as new (ex-display), 7250 Lleal Reception Trough,Double Sigma Kneader MIxer,1500L Industrial Screw Discharge Buffer Tank, 2022, Used machine Manufacturer: Lleal, S.A. Equipment: Reception Trough Model / Capacity: I500 L Year of manufacture: 2022 Serial / Item number: 18725/2 / 5904 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 59 A Total power: 30.25 kW Condition: Used, like-new industrial condition Technical and operating parameters: Operating principle: Buffer and reception trough with bottom discharge extruder screw (without mixing blades) Discharge screw drive: approx. 30 kW Safety standards: CE marked, 2006/42/CE Machinery Directive Design, Operation: High-capacity 1500-liter industrial reception and buffer trough manufactured by Lleal. Designed without agitators or mixing blades, its primary function is to store high-viscosity or paste-like materials and transfer them continuously and smoothly using the integrated 30 kW bottom discharge screw to downstream packaging or processing equipment. Suitable Application Areas: Receiving and buffering pastes, doughs, or viscous masses discharged from kneaders/mixers. Intermediate storage and controlled feeding in chemical, pharmaceutical, and food process lines. Dosing and conveying heavy, non-flowing materials. 7251 - Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Iodjz Tdd Aspfx Ad Nobc Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Manufacturer: Lleal, S.A. Model: AME-1250-SF Year of manufacture: 2022 Serial / Item number: 18725/1 / 5104 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 173 A Total power: 90.25 kW Design: ATEX / Ex Explosion-proof execution (Group II) Condition: new, like-new industrial condition Overall dimensions (A x B x C): 4143 x 2635 x 1950 mm Mixing tank volume: Useful volume: 750 liters Total volume: 1400 liters Technical and operating parameters: Mixing blade drive: 2 pcs mixing motors, total 60 kW Extruder screw drive: 30 kW Operating principle: Heavy-duty Sigma/Z-blade kneader-mixer with integrated bottom discharge extruder screw Safety standards: CE marked (0163), 2006/42/CE Machinery Directive, and 2014/34/UE ATEX Directive Design, Operation: Top-tier high-capacity industrial Lleal AME-1250-SF extruder kneader mixer. In the 1400-liter total capacity bowl, powerful twin mixing blades driven by 60 kW total power homogenize highly viscous, dense materials. Following the process, the 30 kW bottom discharge extruder screw efficiently empties and shapes the product without air entrapment. Suitable Application Areas: Large-scale chemical and pharmaceutical processing of dense pastes, adhesives, and sealants. Heavy-duty plastics, rubber, silicone, and resin compounding and homogenization. Industrial food and cosmetics processing of heavy doughs, creams, and viscous masses

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN231, ABUS ZHB overhead crane system with dimensions approximately 7.8 x 6 m (6 m span) Load capacity / lifting capacity: 500 kg - 0.5 tons Technical data of the system: Crane system consisting of ABUS HB200 rails with 2 drive units System is delivered complete: HB rails, rail connectors, trolleys, drive units, end plates, supports/hangers, etc. including 500 kg ABUS chain hoist Length of steel structure: approximately 8.5 m Overall width (outer edge of steel structure): approximately 5.2 m Total height of crane: approximately 4.87 m Top of rails: approximately 4.3 m Bottom of rails: approximately 4.08 m Top of bridge: approximately 4.02 m Bottom of bridge: approximately 3.81 m Hook height: approximately 3.7 m Supports: HEB120 with 40x40 cm base plates, rails: INP260 Crane is disassembled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg Isdsz Tddcopfx Ad Nobc Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. Isdpfx Adsz Tdcxj Nebc The saw is in very good technical condition and can be tested at our warehouse in Přerov.

Condition: excellent (used), Live tools for cnc lathe Moriseiki Isdpfx Aez Tdcred Nsbc NL-2500 NL-3000 NLX-2500 SL-150 SL-65 SL-75 ZT-1000 ZT-1500 MT-1000 MT-1500 Daewoo Puma 700LM Nakamura WT-150 WT-300 Mazak Hyperturn 4500

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Iodpfx Adjz Tdcfo Nebc

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, suspended monorail including steel structure with floor-level control Dimensions of the steel structure: approximately 7.5 x 4 m, with 1 Demag bridge crane, 2 tons Useful load/lifting capacity: 2000 kg - 2 t Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams Length of steel structure: approximately 6 m Length of travel rails: approximately 7.5 m Ijdpfxoz Tdb Us Ad Nebc Overall width of steel structure: approximately 4 m Overall height of crane: approximately 4.64 m Top of travel rails: approximately 4.4 m Bottom of travel rails: approximately 4.15 m Hook height: approximately 3.2 m System is delivered complete: Steel structure/supports made of HEB160 (approximately 10 cm embedded in concrete), travel rails IPE300 including power rail/power supply 1 single-girder crane with 2000 kg Demag PK10 chain hoist with floor-level control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see photos Shipping by freight forwarder or collection only by prior arrangement.