Delta LT

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET-MW POC 1810 closures production capacity: 32,000 bph at 1.0 L direction of rotation: clockwise availability: beginning of October 2026 Itsdpfxeyluwts Ahwsc

Condition: like new (used), Year of construction: 2016, TETRA PAK CARDBOARD PACKER CBP 32 V400 NEW CONDITION, FOR MULTI CARTON FORMATS LAST VERSION 600V YOM 2016 5477 RUNNING HOURS ONLY!! NORDSON PROBLUE FLEX UNIT AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING Itjdeylny Uspfx Ahwoc

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  Capacity: Max. 13,600 bph Formats: 0.50 L 1.00 L 1.50 L Neck finish: PCO 1881 Alaska Number of cavities: 8 moulds Operating hours: Approx. 35,000 h Scope of Delivery  KRONES CONTIFORM S8 stretch blow moulding machine Preform hopper and feeder Chiller 6 sets of moulds Spare parts Itsdpfx Aheylacuswoc

Condition: used, Year of construction: 2008, operating hours: 99,927 h, functionality: fully functional, machine/vehicle number: 2805, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, manhole location: side, type of input current: three-phase, input voltage: 380 V, pressure: 8 bar, operating pressure: 6 bar, year of last overhaul: 2026, CFT filling block. Number of filling valves: 50, number of capping stations: 6. Working capacity: 20,000 cans of 500 ml per hour. Itedoyk Uptjpfx Ahwsc

Condition: used, Year of construction: 2009, machine/vehicle number: LC603, Technical Specifications & Performance DataThis second hand carton filling and packaging line is engineered for Gable Top Diamond Curve cartons with screw caps, delivering reliable performance for industrial packaging and beverage production. Manufactured by Shikoku and Elopak engineering, the line centers on a Shikoku carton filler and integrates Elopak cap application systems, a cap feeding bunker, complete conveyors with buffering, and an Oystar A+F tray packer for end-of-line operations.Main filler: Shikoku S-PS90HA (Year 2009)Container type: Carton (Gable Top Diamond Curve with screw cap)Compatible formats: 0.5L, 0.75L, 1.0LCap application: 3 × Elopak E-PLA-S30 cap applicators (Year 2009)Cap feeding: Elopak CSFS cap feeding bunker (Year 2009, Serial No. 28119)End-of-line: Oystar A+F Traypacker TF (Year 2011), tray configurations 4×3, 4×2, 2×3Electrical (line standard): 400 V, 50 Hz, 3-phaseFiller electrical/air: 400 V, 50 Hz, 3-phase; Current 177 A; Air 582/533 kPa; Air consumption 1350 NL/minElopak E-PLA-S30 (per unit): 400 V, 50 Hz; Current full load 26 A; Max unit current 40 A; Air pressure 700 kPa; Air consumption 3 NL/min; Weight max 1000 kgElopak CSFS bunker: 400 V, 50 Hz, 3-phase; Current full load 3.6 A; Air pressure 415 kPa; Air consumption 50 NL/minConveyors: Complete conveyor system with integrated buffering sectionDocumentation: Instruction manuals and spare parts documentation includedAdvanced Automation & Control SystemsThe line includes centralized electrical control cabinets and interconnecting cabling to coordinate filler, cap applicators, bunker, conveyors, and tray packer. Clear wiring diagram references on Elopak equipment support maintenance and troubleshooting. Format changeovers between 0.5L, 0.75L, and 1.0L are supported, enabling rapid adjustments for production planning. Pneumatic subsystems are specified with measurable air pressure and consumption, allowing accurate utility sizing and stable automated performance.Centralized electrical control cabinets and cablingDefined wiring diagram references on Elopak modulesPneumatic controls with documented pressure/consumptionFormat adjustment capability for multiple carton sizesIntegrated safety sensors and interlocks on modulesProduction Line Integration CapabilitiesThis used bottling line for gable top cartons is designed as an integrated production cell, from filling and capping to tray packing. The complete conveyor system with buffering ensures balanced throughput between stations and minimizes stoppages. The Oystar A+F Traypacker TF accepts multiple tray patterns, enabling flexible downstream logistics. The modular architecture also allows standalone testing of individual units when required, supporting maintenance and phased commissioning.Inline integration from filling to tray packingConveyors with buffering for flow equalizationMulti-format compatibility: 0.5L, 0.75L, 1.0LSuitable for beverage production in gable top cartonsTray configurations: 4×3, 4×2, 2×3Machine Condition & Maintenance HistoryThe line is presented as ready for operation and is supplied with instruction manuals and spar... Itsdpsyk E S Ssfx Ahwec

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Iodpsyk E Srofx Ahwotc

Condition: used, Year of construction: 2018, functionality: fully functional, EA 629 | MAKRO MAK 5 ADHESIVE LABELLER Year: 2018 Speed: 24,000 bph Direction: Counterclockwise 24 heads No. 6 adhesive stations Itodpfxoyk Ento Ahwec Electronic cams Safety protections

Condition: used, Year of construction: 2013, Labeller CAVAGNINO&GATTI • Year: 2013 • Speed: 8,000 bph Itjdpfx Aheyk Ekzowoc • Direction: Clockwise • 4 cold glue stations (COLLAR, LABEL, BACK LABEL, and GLUE 'I' MARK) • 3 self-adhesive stations (LABEL, BACK LABEL, NECK LABEL) • Electronic cams • Optical centering • 20 heads • Safety protections Bottling Scout Powered by Elitekno Bottling Solutions

Condition: used, Year of construction: 2009, functionality: fully functional, Model: Opera 300 Year: 2009 Speed: 36,000 BPH Rotation: Clockwise American bottles infeed 24 electronic cam plates 3 adhesive stations - 2 Sacmi mobile units - 1 PE mobile module Applicable label types: - Front Itodpfsyk Eiwex Ahwec - Back - Wrap-around - Vignette - Collar / wrap-around collar Optical centering Speed with centering: 22,000 BPH with 0.1L bottles System type: electronic with cameras (vision and computer group) Safety protections Code: EA 669 Bottling Scout powered by Elitekno Bottling Solutions

Condition: used, Year of construction: 2021, functionality: fully functional, Model: Mak-4 20P UA5 L5 CO2 Year: 2021 Speed: 12,000 BPH with glue unit and optical centering 20,000 BPH with adhesive-only, without optical centering Direction: counterclockwise Automatic head adjustment via recipe 20 electronic cam plates Universal clamps Number of stations: 5 adhesive and 1 cold glue (new) (removable) Number of applicable labels: 5 Applicable label types: - Front - Back - Wraparound - Wraparound collar/neck - State Seal I - State Seal L - State Seal U Electronic optical centering with cameras: System (2 cameras with follower system) Iedpfx Aoyk Ehyehwstc System (3 cameras) Safety protections Code: EA 658 Bottling Scout powered by Elitekno Bottling Solutions

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Iedpoyk Ab Djfx Ahwotc

Condition: used, Year of construction: 2014, Overview  This pallet labeller was manufactured in 2014 by LOGOPAK. The machine is designed for applying self‑adhesive labels on pallets. It was in service until September 2025 in a complete RGB line (330 ml) and is currently stopped, still installed, with energy disconnected. The machine is available immediately and can be visited on request. Technical data  Capacity: 60 pallets/hour Application: Self-adhesive pallet labelling Regular maintenance was carried out with two maintenances per year; the last maintenance took place in January 2025 Iodpfx Aoykz Txshwotc

Condition: used, Year of construction: 2021, Overview  This set of 2 inkjet coders was manufactured in 2021 by VIDEOJET. The machines were used for inkjet coding on glass bottles and were in service until September 2025 in a complete RGB line (330 ml). The units are currently stopped, still installed, with energy disconnected. They are available immediately and can be visited on request. Technical data  Capacity: 500 meters/min (up to 60,000 bph) Application: Inkjet coding for glass bottles Maintenance was carried out twice per year; the last maintenance took place in January 2025 Scope of Delivery  Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Itsdoykz Suspfx Ahwsc

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Itsdeykrdbopfx Ahwjc

Condition: used, Year of construction: 1992, Overview  This decrater for returnable glass bottles was manufactured in 1992 by German company KETTNER. The machine was operated until September 2025 in a returnable glass (RGB) line handling 330 ml bottles in 6×4 plastic crates at 2,500 crates per hour. It is still installed with energy disconnected, stopped since September 2025, available immediately, and can be visited on request. Technical data  Capacity: 2,500 crates/hour Formats: 330 ml bottles Plastic crates 6×4 Application: Decrating of returnable glass bottles Operating status: Stopped; energy disconnected Isdpfx Aeyi U N Rshwotc

Condition: used, Year of construction: 1992, Overview  This crate packer (crater) for returnable glass bottles was manufactured in 1992 by German company KETTNER. The machine was operated until September 2025 in a returnable glass (RGB) line handling 330 ml bottles in 6×4 plastic crates at 2,500 crates per hour. It is still installed with energy disconnected, stopped since September 2025, available immediately, and can be visited on request. Technical data Capacity: 2,500 crates/hour Formats: 330 ml bottles Plastic crates 6×4 Application: Crating of returnable glass bottles Operating status: Stopped; energy disconnected Itjdpfx Aheyi U Hvewjc

Condition: good (used), 311 USED Coffee Grinder. We have 2 of these machines. Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Itedpjyi Uu Tefx Ahwoc

Condition: used, Year of construction: 2010, Overview  This bottle washer was manufactured in 2010 by German company KRONES AG. The LAVATEC 358 was operated on 330 ml bottles, achieving a maximum speed of 66,000 bph with a nominal speed of 43,000 bph. The machine is stopped since September 2025, still installed with energy disconnected, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 66,000 bph Nominal 43,000 bph Formats: 330 ml Application: Bottle washing Operating hours: 48,121 h Itodoyi Aywopfx Ahwjc

Condition: used, Year of construction: 2012, Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h Itjdpeyi Almofx Ahwoc

Condition: used, Year of construction: 2010, Overview  This continuous beverage mixer was manufactured in 2012 by German company KHS. The INNOPRO PARAMIX C+ is designed for inline mixing in beverage production. The machine is still installed with energy disconnected and is available immediately. Technical data  Capacity: Up to 16,500 L/h Formats: 330 ml (line reference) Application: Beverage mixing Dimensions: approx. 570 × 230 × 235 cm   Itodsyiz D Ijpfx Ahwec

Condition: used, Year of construction: 2012, Overview  This level & cap inspection machine was manufactured in 2012 by German company HEUFT. The SPECTRUM is designed for quality control of filled bottles, inspecting fill level and closure. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. Technical data  Capacity: Up to 43,000 bph Formats: 330 ml Application: Level & cap inspection on filled bottles Flow direction: Left to right Operating hours: 48,121 h Itedpfxjyizzms Ahwec

Condition: used, Year of construction: 1992, Overview  This depalletizer and palletizer system for returnable glass bottles in plastic crates was manufactured in 1992 by German company KETTNER. The system was operated in a returnable glass (RGB) line for 330 ml bottles running at 43,000 bph until September 2025. It is still installed with energy disconnected, stopped since September 2025, and available immediately. Visits are possible on request. Technical data  Capacity: Up to 60 pallets/hour Application: Returnable glass bottles (RGB) in plastic crates Formats: 330 ml Operating status: Stopped; energy disconnected Scope of Delivery  KETTNER depalletizer KETTNER palletizer Platforms ROBOPAC stretch wrapper Itjdpfx Aheyizxfswsc

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance Data This complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs. Production speed: 24,000 bph Primary application: Hot-fill juice Container handling: PET bottles Validated format example: 0.5L Manufacturing years: 2010 (core equipment), 2011 (palletizer) Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400) Line type: Blow, fill, cap, label, wrap, and palletize Configuration: Integrated continuous production with matched throughput across stations Advanced Automation & Control Systems The line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment. Centralized line control with coordinated drives for consistent throughput Operator-friendly interfaces for speed matching and format adjustments Safety guarding and interlocked access doors Emergency stop circuitry across critical stations Quick-change features to support format and product adjustments Itjdoyipa Ropfx Ahwoc Production Line Integration Capabilities This second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats. Inline operation from blow molding to palletizing Compatible with PET cylindrical bottle formats; validated at 0.5L Hot-fill processing designed for juice products End-of-line shrink wrapping and palletizing for stable distribution packs Potential to adapt speeds and formats within the design envelope of each component Machine Condition & Maintenance History The line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment. Operational status: In production Core equipment years: 2010; palletizer: 2011 Well-known OEM components to support parts and service availability Operational Per...

Condition: used, Year of construction: 1996, machine/vehicle number: PST27, Technical Specifications & Performance Data This TMCI Padovan Tunnel Pasteurizer is a robust second hand machine designed for continuous thermal treatment in beverage production and industrial packaging environments. Built in 1996 and CE certified, it offers reliable tunnel pasteurization with multi-zone temperature management. It is suitable for integration in a used bottling line, ensuring consistent pasteurization units across containers moving on a conveyor through sequential heating, holding, and cooling zones. Manufacturer: TMCI Padovan Machine type: Tunnel Pasteurizer Year: 1996 Certification: CE compliant Control instrumentation: ERO ELECTRONIC TKS temperature controllers, GEFRAN module, operator HMI with recipe management Zones indicated on panel: Second heating, Pasteurization, First cooling Displayed setpoints/values observed: examples include 35.0 °C, 26.0 °C, 23.0 °C; live PV readings visible on the panel Operation mode: Continuous tunnel with conveyorized product flow Advanced Automation & Control Systems The machine features dedicated temperature controllers for each zone to maintain stable conditions, with clear PV/SV displays and alarm management. The interface provides accessible parameters and recipe handling for fast adjustments between products and pasteurization targets. Multiple ERO ELECTRONIC TKS PID controllers with OUT1/OUT2 indicators and alarm thresholds (min/max temperature) Integrated HMI with Italian-language menus for management and recipes Interlocks and safeguarded operation, labeled interlock functions on the panel Emergency stop and illuminated status indicators for real-time state feedback Designed for straightforward setpoint editing and zoned control to stabilize pasteurization units Production Line Integration Capabilities This tunnel pasteurizer is engineered for inline use with upstream fillers and cappers and downstream dryers, labelers, and packers within beverage production and broader industrial packaging processes. It accommodates standard conveyor interfaces and supports format flexibility through adjustable guides and dwell-time control via line speed. Inline or standalone operation with conveyor connection points Adaptable to multiple container formats and line speeds Suitable for integration in used bottling lines handling a range of beverage SKUs Recipe-based settings to streamline changeovers and maintain thermal profiles Machine Condition & Maintenance History The control panel shows active instrumentation with readable process values and setpoints, indicating functional electronics. As a well-maintained second hand unit, it is presented in working condition and ready for operation subject to standard commissioning and line integration procedures. Routine cleaning and sanitary maintenance are supported by the tunnel’s industrial design. Itedpfxsyipaks Ahwec Operational control electronics with visible PV/SV on controllers CE compliance maintained Standard preventive maintenance recommended for pumps, sprays, conveyors, and heat exchange circuits Operat...

Condition: used, Year of construction: 2005, functionality: limited functionality, CIP line for pipeline cleaning features 3 insulated tanks of 2000 l each, automatic concentration dosing, conductivity and return temperature measurement. Control system overhauled in 2016 (complete electrical cabinet and steam valves). Equipment is in operating condition (PLC communication module removed). CIP capacity is 25,000 l/h. Iedpfoyimruex Ahwotc