myProLab GmbH & Co. KG

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from the year 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t Itedpfx Aozmrmyechji GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Side cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence checked Heating and cooling function checked Speed test performed LAN communication and buffer battery checked Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of supply: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories according to pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Loading by forklift is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), CTS Type: C-70/600 CTS C-70/600 Climate Test Chamber Air-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Itodpfx Acszmq Tlehji Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface as per documentation Digital outputs for test specimen control Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including existing documentation / operating manuals Scope of delivery as shown in the pictures The device can be inspected by appointment. Loading with a forklift can be arranged. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Itjdpfx Acezmqx Iehei Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Year of construction: 2004, condition: good (used), functionality: fully functional, For sale is a temperature testing cabinet from the brand Weiss, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Weiss Umwelttechnik GmbH • Model: KWP-64/75 Itodpfx Acezmaa Uehji • Internal dimensions: approx. 500 x 400 x 325 mm • Temperature: approx. -70° to +130° Celsius • Refrigerant: R404A / R23 • Rated power: approx. 1.4 kW • Year of manufacture: approx. 2004 • Condition: Used, fully functional The cabinet can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €150 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on truck. Errors in technical data and prior sale are reserved.

Condition: excellent (used), Walter+Bai LFV100-HH Servo-Hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-Hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including hydraulic power unit PAC-40, PCS8000 Digital Controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial production. The original Walter+Bai testing software, the corresponding software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-Hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K25788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control: Walter+Bai PCS8000 Digital Controller Digital testing machine control Original Walter+Bai testing software available Original software dongle available Industrial PC included in the scope of delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Power Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic hydraulic power unit Water-cooled design Designed for continuous operation PCS8000 Digital Controller mounted Dimensions: Testing Machine (W × D × H): approx. 1,150 × 850 × 2,650 mm Hydraulic Power Unit PAC-40 (W × D × H): approx. 800 × 700 × 1,150 mm Overall transport dimensions (L × W × H): approx. 1,600 × 1,100 × 2,800 mm Weight: Testing Machine: approx. 1,350 kg Hydraulic Power Unit PAC-40: approx. 250 kg Total weight: approx. 1,600 kg Shipping weight: approx. 1,850 kg Clamping System: 2 × mechanical wedge clamping heads Walter+Bai WGR-100-M Several sets of clamping jaws Clamping and mounting accessories as shown in the pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Several sets of clamping jaws Handheld control unit Separate control unit with emergency stop Testing and mounting accessories as shown in the pictures Condition: Used Year of Manufacture 2019 Optical condition as shown in the pictures. Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Sets of clamping jaws Handheld control unit Itedpfxjzlz Rxo Achei Control unit Further accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Instron 5584 Universal Testing Machine, 100 kN Manufacturer: Instron Ltd. Model: 5584 Type: SPRING SF1392-E1-L12-SPL Year of Manufacture: 2007 Machine Type: Universal Testing Machine / Spring Testing Machine Maximum Test Force: 100 kN For sale is a used Instron 5584 Universal Testing Machine with a maximum test force of 100 kN. The system was developed for highly precise spring, compression, and material testing and is ideal for testing laboratories, research institutions, quality assurance, and industrial manufacturing operations. The scope of supply includes the testing machine, the Instron 5800 controller, industrial PC, monitor, keyboard, mouse, and other accessories as shown in the pictures. Technical Data: Manufacturer: Instron Ltd. Model: 5584 Type: SPRING SF1392-E1-L12-SPL Year of Manufacture: 2007 Maximum Test Force: 100 kN Power Supply: 240 V AC / 1~ / 50–60 Hz Mains Current: 25 A Control Voltage: 24 V AC / 50–60 Hz Max. Ambient Temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door, no additional opening space required Controller 5800 (W × D × H): approx. 280 × 570 × 650 mm Equipment: 100 kN testing frame Protective enclosure with sliding door Instron 5800 Controller Industrial PC Monitor Keyboard Mouse Operator console Base Extension Model 2910-061 Test plates / compression tools as shown in the pictures Technical documentation as shown in the pictures Important Note: The original Instron testing software, including a valid software license, is required for operation of the system. The software and the software license are not part of this offer. According to the manufacturer, a corresponding modification is required for recommissioning. Due to the missing software, a functional test could not be carried out. Therefore, the sale is primarily aimed at specialized companies for recommissioning or retrofitting. Transport Data: Itodpfezlp Ixex Achji Machine weight: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg Shipping weight according to the manufacturer: approx. 1,565 kg Shipping dimensions (L × W × H): approx. 2,795 × 1,600 × 1,295 mm Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of supply: Instron 5584 Universal Testing Machine Instron 5800 Controller Base Extension Model 2910-061 Industrial PC Monitor Keyboard Mouse Operator console Test plates / compression tools Technical documentation Other accessories as shown in the pictures Availability: upon agreement. Scope of supply as shown in the pictures. The workbench shown in the picture is not included in the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Iodpfezlidtox Achsti Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), WEISS TECHNIK SC 1000 Salt Spray Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 1000 Machine Type: Salt Spray Test Chamber / Corrosion Test Chamber Test Chamber Volume: approx. 950 liters For sale is a used Weiss Technik SC 1000 salt spray test chamber. The system was developed for professional corrosion, salt spray, and condensation water testing and is ideal for testing laboratories, the automotive industry, research institutions, and industrial quality assurance. The system is equipped with a programmable color touch control panel, an Ethernet network interface, and a test chamber volume of approx. 950 liters. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of Manufacture: 2015 Test Chamber Volume: approx. 950 liters Power Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated Power: 2.6 kW Rated Current: 11.3 A Compressed Air Connection: 4–10 bar (max. 10 bar) Deionized Water: 3–5 bar Control System: Programmable color touch control panel Ethernet network interface RS232 interface Dimensions: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test Chamber Dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test Chamber Volume: approx. 950 liters Equipment: 950-liter test chamber Programmable color touch control panel Ethernet network interface RS232 interface Salt spray testing Condensation water testing Isdpfxszlgyre Acheti Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Transport Data: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Transport Weight: approx. 220 kg Condition: Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of Supply: Weiss Technik SC 1000 salt spray test chamber Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds. Itjdpfx Aozlccischoi An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as: casting alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%). The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name B23Zpkshvo a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging. It has two libraries: 900 and 800.

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of Manufacture: 2017 Machine Type: Corrosion Testing System / Climate Change Testing System Test Chamber Volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate air conditioning unit and Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation tests and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical Data: Model: 618-1000 Series: CORROCOMPACT 617 Serial Number: 16855/005 Test Chamber Volume: 1,000 liters Power Supply: 3+N+PE AC 400 V / 50 Hz Connected Load: 5 kVA + 9 kVA (air conditioning unit) Fuse Rating: 3 × 32 A Compressed Air Connection: 6–10 bar Deionized Water Connection: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU Version: 2.2.3 HMI Version: 2.2.3 Air Conditioning Unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of Manufacture: 2014 Serial Number: 14-2430 Refrigerant: R507 Connected Load: 3.3 kW Max. Operating Current: 8.4 A Compressor Power: 1.3 kW Evaporator Fan: 0.18 kW Condenser Fan: 0.28 kW Steam Humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External Dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with Hood Open: approx. 2,500 mm Internal Dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC Touch Panel Separate Air Conditioning Unit 1,000-Liter Test Chamber Climate Change Testing Salt Spray Testing Condensation Testing Automatic Test Programs Compressed Air Connection Deionized Water Connection Salt Solution Connection Exhaust Connection Floor Drain Supported Test Standards: DIN EN ISO 11997-1 DIN EN ISO 6270-2 AT ISO 11503 ASTM D2247 VDA 621-415 B P-VW 1210 DIN EN ISO 9227 NSS VDA 233-102 DIN EN ISO 6270-2 AHT DIN EN ISO 9227 AASS DIN EN ISO 9227 CASS ASTM B117 D171058 DIN EN ISO 6270-2 CH DIN 50958 ISO 9227 BS 3900 Part F2 DIN 55991 Transport Data: Test Chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Air Conditioning Unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Isdpjzk A Ebsfx Achjti Weight of Test Chamber: approx. 600 kg Weight of Air Conditioning Unit: approx. 500 kg Total Weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition according to the pictures. Scope of Delivery: ERICHSEN CORROCOMPACT 618-1000 Air Conditioning Unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BX1-FR100SN.A4K-004, For sale is a high-quality Zwick/Roell material testing machine, consisting of: Load frame Z100 Machine type, axial: BX1-FR100SN.A4K-004 Machine type, torsion: BXC-TD0500.A4K-002 Force sensor, type Series K (100kN) Torque sensor, type Series NM (500Nm) Itsdpszkugksfx Achji Various ZPVs (Central Test Specifications) The system comes from a laboratory setting and was used for mechanical material testing. All devices are used, well-maintained, and fully functional.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, ZwickRoell Z100 THW Allround Table Top Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Year of Construction: 2024 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a like-new ZwickRoell Universal Testing Machine, Type Z100 THW Allround Table Top, manufactured in 2024. The machine is suitable for highly precise tensile, compression, bending, and material tests in research, development, quality assurance, laboratories, and industrial applications. The testing system is equipped with a 100 kN XforceK load cell, state-of-the-art measuring and control technology, and comprehensive documentation, including operating instructions, testing, and calibration documents. Technical Data: Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Article Number: 3023272 Works Number / Serial Number: 746182 Year of Construction: 2024 Testing Force: 100 kN Test space height (bottom): 1,285 mm Test space height (top): 1,400 mm (with additional cross member) Test space width: 1,040 mm Cross member speed: 0.0001 to 1,500 mm/min Return speed: max. 2,500 mm/min Control deviation: max. 0.05 % Stroke resolution: 0.484471 nm Positioning accuracy: ±2 µm Control cycle: 1,000 Hz Power connection: 400 V / 3-phase / N / PE Mains frequency: 50 / 60 Hz Current consumption: max. 9 A per phase Power consumption: approx. 6 kVA Protection class: IP32 Itsdpfezktr Sjx Achoi Load Cell: Manufacturer: ZwickRoell Series: XforceK Serial Number: 832082 Nominal force: 100 kN Nominal sensitivity: 2 mV/V Dimensions: Load frame height: 1,769 mm Overall height with base frames: 1,884 to 2,694 mm Width: 1,360 mm Width with base frames: 1,536 mm Width including machine electronics: 1,729 mm Depth with base frames: 781 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 215 kg Base frames: approx. 34 kg System weight with typical components: approx. 315 kg Maximum total weight according to nameplate: 385 kg Equipment: Electromechanical two-column testing frame 100 kN XforceK load cell Electronic measuring and control technology Programmable test sequences Digital measurement data acquisition Mechanical holding brake Control panel with emergency stop Original ZwickRoell operating manual Testing and calibration protocols Measurement process capability studies (Cg/Cgk) Calibration markings present CE marking Accessories as shown in the pictures Condition: Used Year of construction 2024. The machine is in very good condition. Testing, maintenance, and calibration documents are available. Optical condition as shown in the pictures. Scope of supply: ZwickRoell Z100 THW Universal Testing Machine 100 kN XforceK load cell Original operating manual Testing and calibration documents Documentation Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), INSTRON 4507 Universal Testing Machine Manufacturer: Instron Limited, High Wycombe, England Type: 4507 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Maximum Test Force: 200 kN For sale is a used electromechanical universal testing machine, INSTRON 4507, series 4500. The testing system is suitable for tensile, compressive, and material testing of metals, plastics, composite materials, and other materials. The system features a microprocessor-controlled load frame, separate control cabinet, operator console, industrial PC, and extensive accessories as shown in the images. Technical Data Manufacturer: Instron Limited Series: 4500 Model: 4507 Country of Manufacture: Made in England Maximum Static Test Force: 200 kN Supply Voltage: 240 V AC Mains Frequency: 50 / 60 Hz Current Consumption: 10 A Machine Weight: approx. 1,330 kg Operator Console Separate digital operator console Microprocessor-controlled control Alphanumeric display (16 digits) 32 function keys Display for force, stress, and strain values Filter and calibration functions Data interface Programmable test sequences Dimensions (W × D × H): 355 × 470 × 267 mm Weight: approx. 7 kg Cable length: 4.5 m Control Cabinet Electronic control cabinet, series 4500 Standard equipment: Overall control Load frame control Force control Preparation for recorder interface Preparation for strain monitoring Dimensions (H × W × D): 635 × 280 / 380 × 394 mm Weight: approx. 32 kg Cable length to load frame: 3.5 m Equipment Electromechanical load frame 200 kN load cell Hydraulic grips Operator console Electronic control cabinet Industrial PC Monitor Keyboard Mouse Emergency stop device Digital control, series 4500 Accessories as shown in the images Applications Material testing Tensile tests Compressive tests Material characterization Quality assurance Testing laboratory Research and development Universities Automotive industry Plastics and metal testing Environmental Conditions Operating temperature: +10 °C to +39 °C Storage temperature: -40 °C to +66 °C Relative humidity: 10–90% (non-condensing) Shipping Data Machine weight: approx. 1,330 kg Control cabinet: approx. 32 kg Operator console: approx. 7 kg Transport on a pallet or by a freight forwarder is required. Condition Used. The machine was last used in an industrial setting. Optical condition as shown in the images. Normal age-related signs of wear are present. Scope of Delivery INSTRON 4507 Universal Testing Machine 200 kN load cell Hydraulic grips Operator console, series 4500 Electronic control cabinet Iodpfszktavjx Achoti Industrial PC Monitor Keyboard Mouse Operating manual Other accessories as shown in the images Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Shaker Fixture Cube / Mounting Cube Material: Magnesium For sale is a high-quality, used Shaker Fixture Cube made of magnesium, designed for vibration and shock testing systems. The mounting cube serves as a universal adapter and clamping device for securing test specimens, fixtures, and measurement setups on electrodynamic vibration testing systems (shakers). The precision-machined mounting surfaces with a threaded grid on all sides allow for the flexible implementation of various test setups. The magnesium design offers high rigidity with a low weight, making it particularly suitable for dynamic vibration and environmental testing. Technical data Manufacturer: BAT Type: Shaker Fixture Cube / Mounting Cube Material: Magnesium Dimensions: approx. 400 × 400 × 400 mm Thread size: M8 Itodpfxjzkhxts Achji Threaded grid on all sides Precision-machined mounting surfaces Several large through-holes for mounting Features Robust, lightweight magnesium construction Precision-machined mounting surfaces Multi-sided threaded grid Large corner through-holes Industrial design Application areas Electrodynamic vibration testing systems Vibration testing Environmental testing technology Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Transport data Dimensions: approx. 400 × 400 × 400 mm Weight: approx. 35 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear consistent with age. Scope of delivery Magnesium Shaker Fixture Cube Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube with Adapter Plate Manufacturer: BAT Machine Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Design: with lateral adapter plate For sale is a high-quality, used magnesium clamping cube for vibration and shock testing systems. The Fixture Cube serves as a universal clamping and adapter device for securing test specimens, fixtures, and assemblies on electrodynamic vibration testing systems (shakers). The precision-machined clamping surfaces with numerous threaded holes allow for the flexible configuration of various test setups. The laterally mounted adapter plate further expands the range of applications. Technical Data Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Dimensions: approx. 330 × 330 × 330 mm Precision-machined clamping surfaces Thread pattern on multiple sides Large through-holes at the corners Lateral adapter plate made of aluminum Features Magnesium lightweight construction Precision-machined clamping surfaces Multi-sided thread pattern Adapter plate made of aluminum Industrial design Application Areas Electrodynamic vibration testing systems Vibration testing Environmental simulation Automotive testing technology Aerospace Electronics testing Testing and development laboratories Isdpfxezkhv So Achjti Quality assurance Shipping Data Dimensions: approx. 330 × 330 × 330 mm Weight: approx. 30–40 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of Delivery Magnesium Shaker Fixture Cube Adapter plate Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to change, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Magnesium Shaker Fixture Cube / Clamping Cube Material: Magnesium Thread size: M8 Iedpszkgqnjfx Acheti For sale is a high-quality used magnesium clamping cube for vibration and shock testing systems. The fixture cube is used for the flexible mounting of test specimens, fixtures, and adapters on electrodynamic shakers. The numerous M8 threaded holes on several sides allow for a wide variety of test setups to be realized. The magnesium design ensures high rigidity while maintaining low weight and is ideal for applications in environmental, shock, and vibration testing. Technical data Dimensions: approx. 300 × 300 × 300 mm Material: Magnesium Thread size: M8 Threaded holes on several sides 2 lifting eyes for transport Internally weight-optimized design Application areas Electrodynamic vibration testing systems Shock testing systems Environmental testing technology Automotive Aerospace Electronics testing Quality assurance Research and development Testing laboratories Equipment Robust magnesium design Precision-machined clamping surfaces Thread pattern on several sides Lifting eyes Industrial design Transport data Dimensions: approx. 300 × 300 × 300 mm Weight: approx. 30–40 kg Condition Used From industrial use. Normal wear and tear consistent with age. Optical condition as shown in the pictures. Scope of supply BAT Magnesium Shaker Fixture Cube Scope of supply as shown in the pictures Shipping by freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Year of construction: 2011, condition: used, The LECO TC-400 ON analyzer is a highly precise laboratory instrument for determining the oxygen and nitrogen content in solid samples. This system is typically used in metallurgy, materials testing, research, and quality assurance, providing reliable elemental analysis for a wide range of inorganic materials. The TC-400 operates as an inert gas fusion analyzer (ON/O-N analysis) and enables: Determination of oxygen (O) and nitrogen (N) in solid samples Analysis of metals, alloys, ceramics, and powder materials Highly precise measurement through fusion extraction in a graphite crucible Automated sample loading (depending on the configuration) Evaluation via integrated analysis software Repeatable results for quality and process control Documentation and data management via TCWin Analysis Software (Version 4.24) Iedpfx Aszkaa Aschoti Thanks to its robust LECO technology, the TC-400 offers stable performance, high measurement accuracy, and a proven analytical platform for demanding applications in research and industry.

Condition: excellent (used), For sale: a Vötsch VT 7004 climate chamber, designed for precise research and testing under controlled temperature conditions. This unit is suitable for use in laboratories, quality control departments, materials research, electronics, and the automotive industry. The chamber is equipped with an electronic temperature controller, an efficient cooling system, and a forced air circulation system that ensures uniform temperature distribution throughout the working chamber. The interior is made of stainless steel, which facilitates cleaning and ensures high durability. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VT 7004 Year of manufacture: 2000 Device number: 58566024350010 Power supply: 230 V AC, 50 Hz Rated power: 2.0 kW Rated current: 10 A Refrigerant: R404A – 0.7 kg R23 – 0.22 kg Maximum working pressure: 25 bar Interior: stainless steel Electronic temperature controller Forced air circulation Isdpfxszi U Tno Acheti Door with silicone seal Lighting and service access port in the chamber Compact design Condition: Used unit. Visually in good condition. The chamber is clean and complete. Sold in the exact condition as shown in the pictures.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: Itjdpfxozi T Nhe Achji R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: used, Technical details: Itodpjzi R R Asfx Achei traction force: 250 kN control: SCHENCK HYDROPULS PSB *

Condition: excellent (used), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for continuous professional operation. For sale is a professional climate test chamber from Weiss Technik, model WK 5/55-120, manufactured in 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range from 10–95% RH, the chamber covers a broad range of testing scenarios. The spacious test chamber of approximately 5 m³ allows for testing of larger components or assemblies. Technical highlights: - Temperature range: -55°C to +120°C - Climatic range: 10–95% RH - Heating/cooling rate approx. 1.5 K/min - Requires water cooling Technical data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume - Test space volume: approx. 5 m³ - External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm - Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55 °C to +120 °C - Heating/cooling rate: approx. 1.5 K/min - Climatic range: 10 – 95 % RH - Dew point range: +4 °C to +85 °C Electrical data: - Mains connection: 3/N/PE AC 400V ±10% 50Hz - Rated power: approx. 47 kW (depending on configuration) - Rated current: 71 A - Customer-side fuse: 63 A Cooling water: - Water cooling required - Maximum cooling water consumption: approx. 7 m³/h - Inlet temperature: approx. 20 °C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: Iedsziztujpfx Acheti - Weiss Technik climate test chamber WK 5/55-120 - Control system - Operating manual (German) - Nameplate & documentation Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data! All information provided without liability.)

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) Iodpfxozizr Ro Achjti For further questions, we are happy to assist you by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Itedpfxezizrks Achei Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) Ijdpfxeziznfj Acheti - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time Itedpfx Acszizmzshji - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: