Audinnov

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 21,000 rpm, working length: 3,750 mm, TECHNICAL DETAILS Machining length with bar support: 3,750 mm Machining length without bar support: 3,500 mm Travel range X-axis: 3,500 mm Travel range Y-axis: 280 mm Travel range Z-axis: 300 mm Positioning speed: 30 m/min Positioning accuracy: ±0.1 mm Spindle power: 6 kW Spindle speed: 21,000 rpm Spindle interface: HSK F63 Tool positions: 5 Max. tool diameter (manual): 200 mm Max. tool diameter (automatic): 92 mm Max. saw blade diameter: 500 mm MACHINE DETAILS Air consumption: approx. 50 l/cycle Laodjznczkjpfx Ak Aod Compressed air requirement: > 7 bar Power supply: 400 V, 3-phase Note: The machine's operating hour counter is defective and cannot be read. The machine was only used in a single-shift operation.

Condition: reconditioned (used), functionality: fully functional, X working area: 3,100 mm Electrospindle: 1 HSD, ISO 30 taper – max. 18,000 rpm Lajdpfx Akszmyuxe Asd Tool changer positions: 5+1 Worktable: 4 automatically positioned clamps Weight: 1,950 kg Dimensions: 5,472 x 1,900 x 2,200 mm

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads Ledpezmrhkjfx Ak Asad X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2011, condition: used, Used EMMEGI TRIMMER E CNC edge trimming machine for sale, manufactured by Fratelli Rinaldi S.r.l., designed for the automatic cleaning of welded corners on PVC frames and sashes. The machine features numerical control via an industrial PC, monitor, and keyboard, with the ability to recall different machining programs depending on the profile to be cleaned. The TRIMMER E model performs the machining process using 3 interpolated axes and an automatic cycle. The 300 mm diameter blade allows for the cleaning of the external corner of different profiles. The machine also features upper and lower units for the removal of weld beads and the machining of internal and external corners. Key features: manufacturer: Fratelli Rinaldi S.r.l. / Emmegi; model: TRIMMER E; year of manufacture: 2011; CNC machine for cleaning the corners of PVC profiles; automatic machining cycle; control via industrial PC; 3 interpolated axes; cleaning blade diameter 300 mm; upper and lower machining units; programming of different profiles; pneumatic clamping of the frame; protected machining cabin; CE marking. Used machine, available at our facility in Termini Imerese (PA), Italy. Inspection and testing possible by appointment. Additional photographs, technical information, and operating videos are available upon request. Lasdpfx Ajzmhq Uok Asd Availability: immediate.

Year of construction: 2001, condition: used, Profile height: max. 150 mm Ljdpfszmhqzjx Ak Asad Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spray device 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Lajdpfxjzlnvue Ak Aod Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ledszlat Sspfx Ak Ajad Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 178000012, Machine in new condition, barely used. Laedpjzk Ndqofx Ak Ajd

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: C105642, functionality: fully functional, operating hours: 1,960 h, Machine in good condition, with little use. Lajdpfx Ajzk I Dcek Asd

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2686017, For sale is a steel cutting machine from ROTOX, type SZA268, manufactured in 2020. Laedsziandepfx Ak Asd The ROTOX SZA268 is an automatic sawing machine used for cutting steel rectangular tubes and steel profiles with a wall thickness of up to 4 mm. The 90° sawing unit with hydraulic feed enables precise cuts, which can be performed either parallel to a ROTOX PVC cutting line or according to a cutting list. The length positioning is controlled by a servo axis, and the machine features a PC control and a profile-independent clamping system for flexible operation. Technical data: Dimensions: Machine width: approx. 12.5 m without protective fence Machine depth: with 10 mm table: approx. 2500 mm without protective fence with 20 mm table: approx. 3500 mm without protective fence Machine height: approx. 1900 mm Weight: approx. 2560 kg incl. feeding magazine for 10 reinforcing bars and removal table with pusher Cutting angle: 90° Cutting length min / max: 250 / 3500 mm Usable tools: All saw blades must comply with EN 847-1 and be approved for the speed of the saw motors. Saw blade: Ø 450 x 4.0 x 50 mm, Z300 Material to be processed: Steel or aluminum reinforcing bars for window construction Bar length min / max: 450 / 6500 mm Profile height min / max: 7 / 80 depending on the contour mm Profile width min / max: 28 / 80 depending on the contour mm Electrical: Mains connection: 3/N/PE~ 50 Hz 230/400 V ± 5 % Power: 2.4 kW Rated current: IN= 16 A Fuse: B 16 A Mains connection cable (type): H05RR-F 5G2.5 qmm Protective conductor: 10 mm² Cu Saw motor: 230/400 V; 50 Hz; 1.5 kW; 5.7/3.3 A Output speed: 65 1/min Lubrication: 0.6 l mineral oil CLP 220 Pneumatics: Operating pressure: 7 bar Limit pressure: min. 6 bar (also during operation) max. 8 bar Compressed air quality: ISO 8573-1: 2010, Class 7.2.4 Pressure switch: Warning pressure 6 bar / Shut-off pressure 5 bar Air consumption: approx. 60 l per cut Hose connection: Ø inner 9 mm Hydraulic linear drive Operating pressure: 160 bar Stroke: 200 mm Motor: 24 VDC; 500 W Workpiece clamping: Pneumatic Permissible ambient temperature during operation: min. 15 °C and max. 40 °C Operating manual available in digital format. Subject to prior sale, changes and errors.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm Lsdpszhuyfofx Ak Aoad EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door Lajdpfx Aezhkbfok Aod - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Year of construction: 2009, condition: excellent (used), Elumatec SBZ 140, extended version: 7.6 meters Weight approximately 5000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety guard Light curtains Automatic clamping detection Central lubrication Ledpozhg S Tefx Ak Asad Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer. Max. milling diameter: 80 mm Max. sawing diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, -90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (in many configurations) Control: 4-axis CNC system, with PC control, color screen, USB & network. Software: eluCam. Automatic material clamping, automatic positioning via indexing pins Pendulum/shuttle operation (two work zones), which improves production cycle time. In addition to milling and drilling, it can also tap, saw, and perform profile machining – all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT is reclaimable for businesses).

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm - 2 tool magazines Ljdpjzgv Hwofx Ak Ajad - 2 mitre heads - profile length measurement - 4 pneumatic clamps - automatic clamping adjustment - manual control panel - E550 control unit - spindle with 6 kW power - light curtain safety system Video of the machine in operation available upon request.

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Lsdjzgfvbepfx Ak Aead Note: Further technical details regarding the machine can be found in the attached document.

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Lsdozf I Uwopfx Ak Asad Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Lodpfx Aozf I Ttek Asad Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: used, End mill diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Ledpfszfk Sfex Ak Aead Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Pneumatic material feed via foot switch Weight: approx. 280 kg

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1223330255, For sale is a reliable Elumatec SBZ 122/33 3-axis CNC profile machining center. Lajdpfx Aezd R Iqsk Aed The machine has been used exclusively in a high-end aluminum window and door production facility; therefore, it has been professionally maintained and has never been subjected to substandard or neglectful operating conditions. This model is an industry standard for milling and drilling aluminum, PVC, and thin-walled steel profiles. The equipment operates flawlessly, maintains its factory accuracy, and is fully ready for production. We are selling the machine due to a factory upgrade and modernization plan. For seriously interested buyers, we can provide a video demonstrating the machine in operation. Additional Information: • Inspection: The machine is currently connected to power and compressed air. It can be inspected and tested live on-site in Kaunas, Lithuania. • Loading/Transport: The buyer is responsible for organizing transport, but we can assist with loading the equipment. For further details or to arrange an inspection, please contact us at the number provided. Price: €25,500 + VAT. Open to negotiation on-site. Sold by a company; an EU-VAT invoice can be issued (0% VAT available for EU VAT-registered buyers outside Lithuania).

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 S PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS ), • Ability to perform operations on aluminum and PVC profiles, such as channel cutting, drilling, marking, cutting at different angles, etc. • 10 high-speed, air-cooled spindle motors specifically designed for aluminum. • Average axis speeds exceeding 120 m/min. • Precision 3-axis profile clamping station. • Profile feeding capacity of 7 pieces. • Profile processing length: maximum 6500 millimeters / minimum 600 millimeters. Ledszd Rndepfx Ak Aoad • Automatic profile length detection feature. • Windows-based, user-friendly interface with easy adjustment options. • Data transfer via USB, online remote monitoring system. • Remote connection support. • 23.8" touchscreen, high-performance display. • Servo-controlled cutting unit that allows for precise cutting between 30 and 150 degrees, with an accuracy of ±0.1 degrees. • Automatic transfer of cut profile waste to a collection cart via a conveyor system. STANDARD EQUIPMENT • Ø550 millimeter saw blade. • Automatic scrap chip conveyor discharge unit. • Barcode printer. OPTIONAL EQUIPMENT • Compatibility with CAM programs. • Optional length. • Belt-type output conveyor. • Safety barrier (sensor).

Year of construction: 2026, condition: excellent (used), machine/vehicle number: 2220024396, Milling machines. Ljdpfx Aezdq Uqek Asad

Year of construction: 2005, condition: good (used), Double-head PVC profile welding machine. Lsdpfxjzdqpbo Ak Asad

Year of construction: 2015, condition: used, machine/vehicle number: 169 6019, In very good condition. Lasdpfx Aszdql Ask Asd

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 6080008264, In very good condition (almost perfect). Laodpfxozdp Rwe Ak Asd

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 400 6071 LA398, In very good condition. Ljdpfx Aozdp H Eek Asad