Michael Heil

Condition: good (used), Machines are in good working condition. Gedpfxez Nxfye Aipouh

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm Gusdjzy R Rkspfx Aipsh 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Gjdpfozx S E Hex Aipsuh Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, It is an semi-automatic machine fitted for small parts cleaning by Ultrasonic. Godpfxozvh E Ro Aipouh

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, heating capacity: 3 kW (4.08 HP), overall weight: 300 kg, input voltage: 380 V, year of last overhaul: 2026, Two-stage machine: the first stage uses ultrasonic cleaning, and the second stage is for rinsing without using the ultrasonic function. Guodozt Riajpfx Aipeh

Condition: good (used), Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: ZN, Stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD -Operating frequency: 25 kHz -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg Gjdpfxezn H Als Aipjuh

Condition: new, Year of construction: 2026, 4-Chamber Ultrasonic Cleaning System HA 4x24L DIS Ultrasonic cleaning – Ultrasonic rinsing – Rinsing – Drying Frame/housing/tanks made of stainless steel 1.4301 Basket dimensions: L x W x H 300 x 220 x 200 mm Guedpoznhvaefx Aipeh Tank volume: 24 liters Heating power per tank (1-3): 1,200 watts (up to 80 °C) Including level monitoring/overheating protection Including insulated hinged lids on each station Tank 1 including ultrasonic cleaning (400/800 W) including surface rinsing and oil separator Tank 2 including ultrasonic cleaning (400/800 W) and air injection/turbulence Tank 3 including air injection/turbulence Tank 4 hot air dryer/convection dryer up to 100 °C (power: 2,000 watts) 3 x baskets made of stainless steel 1.4301 included (mesh size: 10 x 10 mm; max. load weight: 10 kg) External dimensions, approx.: L x W x H 2,700 x 480 x 920 (h) mm Required connections: Mains connection: 400V 3PH+N 50/60Hz Connected load: approx. 8.5 kW

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. Gedpfx Aijzmxlpopjuh The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: refurbished (used), Year of construction: 2004, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 014404, total width: 2,600 mm, total length: 1,750 mm, total height: 2,350 mm, maximum load weight: 50 kg, tank capacity: 230 l, compressed air connection: 6.5 bar, input voltage: 380 V, year of last overhaul: 2026, Hösel Solvacs-2 with additional distillation unit. The system and the distillation unit have both undergone a professional general overhaul. The system is connected to the power supply and is ready for inspection and a test run. The system requires external cooling. Gedpfx Aiszln Iqspeuh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Ultrasonic cleaning and passivation are possible (citric acid-based), CNp vacuum process for, e.g., blind holes. Gjdpfx Aszhv Udeipouh Suitable for high-purity industries, the electronics industry, ranging from coarse/pre-cleaning tasks under robust industrial conditions to fine and ultra-fine cleaning processes. Batch size: 670 x 480 x 300 mm. Components made of metal, plastic, or ceramic. Suitable for bulk materials or positioned individual components. Fully or partially automated, e.g., diesel injection components.

Condition: used, Year of construction: 2018, functionality: fully functional, total width: 1,381 mm, total length: 3,170 mm, total height: 2,056 mm, maximum load weight: 40 kg, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, 2-chamber ultrasonic cleaning system with a goods lift and manual transfer unit to move items from chamber 1 (cleaning) to chamber 2 (rinsing). Oscillation/movement of goods is performed via the goods lift. Basket: 600x400x400h mm - Loading can be done directly at the goods lift from the front. Godpfozgwqwex Aipsuh Both chambers are equipped with ultrasonic transducers (at the bottom); frequency: 40 kHz, power: 1200 watts (peak 2,400 watts). Chamber internal dimensions: 750x450x520h mm, volume: approx. 120 liters; chamber material: stainless steel 1.4571. Both chambers are equipped with an oil separator (manufacturer: Belki) and a candle filter (9 3/4" - fineness 100 or 50 microns, selectable). Heating in both chambers: 2 kW each. Connection power: 12 kW - supplied ready for connection with a 32-ampere plug.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, total width: 3,000 mm, total length: 3,000 mm, total height: 2,800 mm, IFP - KP 100 WTR Metal Degreasing and Cleaning System Key Specifications: - New system: Year of manufacture 2026 - Usable media: Water with cleaning additive - Basket dimensions (LWH): 670 / 480 / 300 [mm] - Throughput: approx. 4 batches/hour - Filling volume: 1130 liters - Connection power: 33 kW - Compressed air: 6 bar - System weight: 2600 kg System Equipment - Fully enclosed system design - Rotating and pivoting mechanism Godpfxjzf Hp To Aipsuh - Front loading - 3 x Flood pre-treatment tanks (heated) - 1 x Process filter cleaning tank - 1 x Process filter rinsing tank - 1 x Process filter rinsing tank 2 - Surface rinsing - Glass door - Electropolished work chamber - Oil separator - Hot air drying - Vacuum drying - Sliding table with two positions - Dosing system for cleaning agents - Ultrasonic 1 kW / 25 kHz (power adjustable) - Spraying via four nozzles - 12" touch panel - Automatic water replenishment

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, total width: 2,920 mm, total length: 5,720 mm, total height: 3,360 mm, maximum load weight: 50 kg, heating capacity: 59 kW (80.22 HP), warranty duration: 6 months, input frequency: 50 Hz, year of last overhaul: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Maximum loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Loading station with transport trolley Godpfxoy H Uzvo Aipjuh 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz - switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable), including lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large separate oil separator. - Automatic cover on Tank 1 - Media filtration in all tanks (via cartridge filter) - Complete system enclosed and with exhaust extraction - Control system: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Electrical connected load: 59 kW The system can also be dismantled and re-installed at a new location by our specialist technicians for an additional charge, if required. Water treatment for Tank 4 (final rinse) can be supplied at extra cost. Test cleaning possible at any time, the system is powered up.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DZ-202409012, heating capacity: 3 kW (4.08 HP), power: 1.5 kW (2.04 HP), operating temperature: 95 °C, usable tank capacity: 99 l, Equipment: documentation/manual, The machine was purchased new from the manufacturer in 2024, has only been used briefly, and is therefore in like-new condition! The system consists of four independent chambers and enables a complete cleaning process, including washing, rinsing, and drying. TECHNICAL DETAILS Number of units: 4 Housing material: Stainless steel AISI 304 Wall thickness: 2 mm Units: Ultrasonic washing chamber and ultrasonic rinsing chamber Ultrasonic power: 1,500 W (30 transducers) Frequency: 40 kHz Heating power: 3 kW Maximum operating temperature: 95 °C Circulation and filtration system Dynamic lifter system (“up & down” technique) for enhanced cleaning performance Final rinse chamber Tank capacity: approx. 99 l Heating power: 3 kW Hot air drying chamber Heating power: 3 kW High-performance blower Temperature control MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,880 x 1,350 x 1,180 mm Machine weight: approx. 480 kg EQUIPMENT Separate fluid supply and discharge for each chamber Suitable for use with industrial cleaning chemicals Stainless steel wire baskets Drain valves and level sensors Electronic control system Gusdpfx Aieyx Annopoh Complete technical documentation and certificates The washing system is designed for precision cleaning of machined metal parts, particularly for the removal of machining oils, chips, and fine particles following turning, milling, or grinding operations.

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. Gedpfx Aijywua Tspjuh The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 840 mm, total length: 1,040 mm, total height: 900 mm, maximum load weight: 200 kg, heating capacity: 6 kW (8.16 HP), tank capacity: 275 l, warranty duration: 1 months, type of input current: three-phase, inner dimension height: 420 mm, inner dimension length: 700 mm, inner dimension width: 500 mm, compressed air connection: 7 bar, input voltage: 400 V, input frequency: 50 Hz, WJS MTS Tool Washing Machine - Features an automatic system for cleaning tools of resin and other residues. - The carrier plate holding multiple tools is moved up and down in the cleaning bath, ensuring that all surfaces, channels, and recesses are cleaned quickly and thoroughly. - Additionally, two ultrasonic modules are utilized to significantly reduce cleaning time. - The system operates quietly and is both user- and environmentally-friendly, as only water-soluble cleaning agents are used and the cleaning process takes place within a closed unit. - The system is fully automatic and requires no supervision, saving time and money while ensuring tools are cleaned perfectly and gently. The WJS MTS-U system can also clean machine parts and other materials. Guodoym N Uiepfx Aipjh - Suitable for all alkaline and acidic agents, as well as solvent-based cleaners. Ex works price Delivery time: 10-12 weeks One machine available from stock, subject to prior sale.

Condition: good (used), basket dimensions 0 control 0 total power requirement 0 kW weight of the machine ca. 0 t ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Gjdpfx Aijyfh Rtopsuh Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power* (W) 800 Heating power (W) 800 Usable volume (liters) 8.6 Weight (kg) 14.8 Tank material: Stainless steel Housing material: Stainless steel 1.4301 External dimensions (W / D / H) (mm) 390 x 330 x 410 mm Usable dimensions W / D / H (mm) 300 / 240 / 140 With basket

Condition: new, Year of construction: 2026, total width: 680 mm, total length: 780 mm, total height: 670 mm, maximum load weight: 15 kg, tank capacity: 105 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, Tank dimension: (lxwxh) 900 x 600 x 500mm Gusdpjx E S H Tjfx Aipoh Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray without optional lifter function

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Godpfxjxx Swvj Aipsuh Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 52915, Technical characteristics: # Payload Capacity: Basket size 530 x 320 x 233 mm Gedpfxjxwmkzj Aipjuh # Tank capacity: 420L # Type of detergents: modified alcohol solvents # Washing chamber loading capacity: Max. 70 KG # Ultrasonic equipment: 4000W, 25kHz # Mechanical weight: 6000 Kg Electrical Equipment # Operating voltage: 400Vx3 # Connection power: 31 kW / rated current 63A Dimensions # Machine Dimensions (L×W×H): 2800 × 1750 × 2300 mm Equipment consists of: # Main machine Hosel, manual loading/unloading with special stainless steel support Machine status: WORKING

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication Gujdpexuzyfsfx Aipjh - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: new, Year of construction: 2025, functionality: fully functional, maximum load weight: 200 kg, warranty duration: 24 months, Available ex-stock Switzerland – immediate delivery! 24 months warranty Gsdpfx Aew Ic Hnoipouh Net capacity: Cleaning area: D=900 mm Internal height: 530 mm Loading weight: 200 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - 2 washing pumps for efficient cleaning - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter plate Accessories: 1x transport trolley with pull-out basket Steam extraction Automatic level top-up Oil skimmer, model WE Draining device / floor flushing with hoses and manual ball valve

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Guodpfxow Ewl Ue Aipsh Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Godpfx Asv U A Izjipeuh Demonstration system from the Glogar Technology Center, available immediately

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 Gusdpfx Aisv Nztxopeh THIS DEVICE HAS NEVER BEEN USED.