Forst- und Holztechnik Schröder

Condition: new, - NEW - General features and technical data: - 4-knife helical cutterhead, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal screws - Chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Dust extraction port 150 mm - Electrical components and safety devices in accordance with CE standards Features and technical data SP 63 A: - Planing width: 630 mm - Motor: 50 Hz, 5.5 kW / 7.5 HP - Infinitely adjustable feed rate from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (input of the planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Includes: - Motor with 7.5 kW / 10 HP, incl. automatic star-delta starter Order No.: 04/03 & 61/10 - Extension for thickness table, 600 mm Order No.: 70/03 - Cutterhead system TERSA, incl. reversible knives Isdpfx Aozd Hckedrjau Order No.: 28/03 - 1 rubber infeed roller & 2 rubber outfeed rollers 630mm

Condition: good (used), Year of construction: 2017, CALIBRATION – PLANER MACHINE, Iedpfxezd E R Hj Adreau MANUFACTURER – LEDINEK COMPANY, Model ROTOLES 400 D – S, Year of Manufacture – 2017. Condition of the machine – good.

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1100 mm Height: 1400 mm Isdpfszd Evvox Adreau

Condition: excellent (used), Catalogue number 7695 Iajdpszdzprofx Adrsu TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)

Condition: new, Thickness planer type S 63 A,Partnership EditionTechnical data:working width: 630 mm4-knife planer shaft system TERSA, d=120mm: 4.800 rpmmax. chip removal planing according to CE: 8 mmmin./max. thickness pass: 3/310 mmmin. workpiece length: 250 mmfeed rate: stepl. 6 - 20 m/minmotor 380 Volt / 50 Hz.: 7,5 kWsound level according to EN 27960: 86 - 90 dB(A)basic equipment:thicknessing table adjustment via 4 trapezoidal thread spindleselectromotive thicknessing table stroke with electronicpositioning deviceelectrics according to CE standard magnetic brakecircuit breakeremergency stop switchsafety switch planer shaft coverexhaust port d=150mmthicknessing table extension 600 mm Iasdpfozdu U Iex Adrju

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,600 rpm, total length of planing tables: 900 mm, overall weight: 690 kg, Equipment: CE marking, documentation/manual, HOUFEK Thicknesser 530 mm | 5.5 kW | 4 Knives | Electric Lift Table | 2017 HOUFEK!! HOUFEK THICKNESSER! Professional wood thicknesser from 2017. Used machine, fully functional, ready to work. Solid construction with a weight of 690 kg ensures stability and high-quality material processing. TECHNICAL SPECIFICATIONS: - Maximum material width: 530 mm - Minimum material length: 320 mm - Working height range: 3–250 mm - Table length: 900 mm - Table width: 550 mm - Main motor power: 5.5 kW (7.5 HP) - Spindle speed: 4600 rpm - Number of knives: 4 pcs (TERSA) - Spindle diameter: 120 mm - Spindle length: 550 mm - Feed motor power: 0.58 / 0.75 kW - Feed speed: 4 / 8 m/min - Dust extraction port: 150 mm - Power supply: 400 V / 50 Hz - Machine dimensions: 1050 × 1000 × 1200 mm - Weight: 690 kg Equipment: Electric table height adjustment Mechanical table position measurement Automatic star/delta switch Segmental roller pressure Serrated feed roller Four-point table support Two feed speeds: 4 and 8 m/min CE certificate The machine is ideal for a carpentry workshop, sawmill, or company involved in the production of furniture and wooden elements. Condition: used, normal wear and tear appropriate for its age. Possible to inspect on-site. It is possible to test the machine on-site. Financing options are available through leasing or installments. The machine has been technically inspected and is ready for further operation. It is possible to start and test the machine on-site, which allows you to assess its condition and operating parameters before purchase. For the convenience of our customers, we offer financing options in the form of leasing or installments. We assist with the formalities and selection of the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Iaodozc U Nkjpfx Adrou jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Condition: good (used), Code: 0408 Brand: CMC - ITALY Model: SP 630 - CE Standard Automatic thickness planer for joinery, furniture, custom-made furniture, wooden joinery, sawmills, timber carpentry, plastics and various - CE Standard Technical specifications: Working width 630 mm Max working height 300 mm Iodpfxezc Hrde Adrjau Min working height 4 mm usefu thickness capacity 8 mm N° 4 knives Rotational speed 5000 rpm Feed speed 4–20 mt/min Working height display Motor power Hp 7,5 Table lifting motor power 0,5 Hp Feed motor power 0,75 Hp Suction inlet diameter 120 mm Overall dimensions mm 1200 x 1120 x 1150 h Weight kg 870

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB/132228, functionality: fully functional, SCM S520 PLANER Working width: 520 mm Planing height: 250 mm Planing cylinder: helical blades Number of blades: 4 Height adjustment: electric Thickness display: scale Feed speed: 2 speeds Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 5.5 kW Dust extraction port: 140 mm Machine length: 1200 mm Machine width: 1400 mm Iasdpfx Aszcyzfodreu Weight: approx. 900 kg Available in ARDENNES

Condition: excellent (used), CATALOGUE NO. 7916 Iedozcu Tvspfx Adrsau TECHNICAL DETAILS - Working width: 510 mm - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)

Condition: ready for operation (used), Schelling D66 Planer width 650 mm Maximum planing height 220 mm Number of knives 4 Table length 1,100 mm Number of feed rollers 1 Main motor 5.5 kW Table rollers Knife shaft with strip planing knives Material transport via steel roller Iasdpfx Aozcutpedreu Weight approx. 1,085 kg Space required, length 1.2 m Space required, width 1.4 m Space required, height 1.1 m Condition: Functionality tested

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 510 mm, tool diameter: 110 mm, number of blades: 4, actuation type: electric, – Very good condition – Made in Italy – Quiet operation TECHNICAL SPECIFICATIONS: – Planing width: 510 mm – Planing height: 250 mm – Motor power: 4 kW – Number of knives: 4 pcs Ijdpfozcpf Tox Adroau – Shaft diameter: 110 mm – Infeed roller in the table – Electric height adjustment – Row of anti-kickback pawls – Toothed helical shaft – Smooth steel shaft – 4 feed speed settings: 5 / 8 / 12 / 18 m/min – Outlet diameter: 160 mm – Machine dimensions (L/W/H): 110 / 110 / 130 cm – Weight: 650 kg

Condition: excellent (used), Catalog number 7734 TECHNICAL DATA - Roller width: 630mm - Max. thickness of the workpiece: 230mm - 4-knife planing roller * Top: - Pawls - Toothed feed roller - Pressure roller - Planing roller - Pressure roller Iajdozcmx Depfx Adrou - 2 smooth feed rollers * Bottom: - Adjustable roller in the lower table - Motor approx. 7.5kW - Stepless feed speed adjustment - Diameter of the dust extraction nozzle: 145mm - Dimensions (L/W/H): 1250x1300x1300mm - Weight: 908kg ADVANTAGES - Made in Italy - Very good condition - Used thickness planer Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: new, Catalogue number O231 - New machine, in stock - CE certificate TECHNICAL DATA - Main motor power: 5.5 kW (7.5 HP) - Feed motor power: 0.5 kW (0.75 HP) - Shaft diameter: 120 mm - Spindle speed: 5,500 rpm - Feed speed: 4 – 20 m/min - Max. working width: 630 mm - Min. working length: 280 mm - Max. working height: 300 mm - Min. thickness: 5 mm - Max. cutting depth: 8 mm - Number of knives: 4 pcs - Extraction port diameter: 160 mm - Machine dimensions: 1250 x 1270 x 1180 mm - Weight: 870 kg Original photos Ijdpfszcd Ddsx Adroau Net price: 35,000 PLN Net price: 8,300 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: excellent (used), Catalogue number 7987 TECHNICAL DATA - Roller width: 500 mm - Number of knives: 4 pcs Iodjzcc U Ispfx Adreau - Max. thickness of workpiece: 230 mm – From above: - Anti-kickback fingers - Toothed, feed-in roller; pulling, swiveling - Pressure bar - Planing shaft - Pressure bar - Smooth, feed-out roller; pulling - Motor: 4 kW - Electrically adjustable table height - 2 feed speeds: 8/12.5 m/min - Dimensions (L/W/H): 1000x1000x1050 mm - Weight: 620 kg ADVANTAGES – Made in Italy – Used thickness planer, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: good (used), SCM S63 Thicknessing Machine Type: S63 Iodpfx Adjzcc Uborsau Working width: 630 mm 4 knives in the cutterhead 2 rollers in the table Electric height adjustment of the table

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW Iaodpfxezcc Syj Adrju - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7172 TECHNICAL DATA - planing width: 640 mm - max thickness of workpiece: 230 mm - 4-knife cutterhead Top section: - anti-kickback fingers - toothed, powered infeed roller - pressure bar - planing cutterhead - pressure bar Iasdpfxoza D I Re Adrsu - smooth, powered, metal outfeed roller Bottom section: 2 adjustable sliding rollers in the table - main motor: 5.5 kW - electric table lifting: approx. 0.25 kW - two feed speeds: 0.75 kW - extraction port diameter: 160 mm - dimensions (L/W/H): 1320x1270x1380 mm - weight: 903 kg ADVANTAGES – made in Germany – used thickness planer, in very good condition Net price: 21,900 PLN Net price: 5,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), SCM S52 thickness planer Iaodpfx Asza Dg Hsdrsu Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, digital height display, 160mm dust extraction port, 5.5KW motor, quiet operation, machine in good condition.

Condition: excellent (used), CATALOGUE NUMBER 7914 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max thickness of the workpiece 250mm – from above: - pawls/ejectors - toothed infeed roller, pulling - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling – from below: - adjustable rollers in the lower bed 2 pcs - motor 7.5kW - electric bed lifting - lifting motor 1.1kW - 2 types of feed speed - feed motor 1.3kW - dimensions L/W/H 1130x1300x1200mm - weight 1026kg ADVANTAGES – manufactured by the Polish brand JAROMA Iodpfx Aszabftodroau – electric bed lifting – DTR documentation – used thicknesser, very good condition Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg Iodpfszabfgex Adrsau ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates)

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Iaodoy T Rgzspfx Adrsu Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg Ijdpfjy T Rf Rex Adroau FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 210 mm * From above: - Pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft Iasdpfxey T Rfws Adreu - Pressure rollers - Smooth outfeed shaft, pull-type * From below: - Adjustable rollers in the lower bed, 2 pcs - Motor: 4.4 kW - 2 types of feed speeds - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - Made in Germany - Used thickness planer, very good condition Net price: 12,900 PLN Net price: 3,071 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (The price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7599 TECHNICAL DATA - Shaft width 410mm - Number of knives 4 pcs - Max thickness of workpiece 240mm - Top: - Ratchets - Toothed, pull-type, and helical feed roller - Pressure rollers - Planing roller - Pressure roller - Smooth pull-type delivery roller - Motor 5.5kW - Electric brake - Manual table lifting - 2 feed speed types 7, 14 m/min - Diameter of extraction nozzle 120mm - Dimensions (L/W/H) 900x1030x1100mm - Weight 350kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations) Iaodpfx Asy T Rfqjdrsu

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: Iajdpfx Aoy T Rd Hedrsu - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)