Laiptu fabrikas

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018/23, functionality: fully functional, operating hours: 12,371 h, travel distance X-axis: 5,709 mm, travel distance Y-axis: 1,650 mm, working width: 1,260 mm, milling spindle speed (max.): 20,000 rpm, working length: 5,200 mm, TECHNICAL DETAILS Working area X: 5,200 mm Working area Y: 1,260 mm Main spindle travel X: 5,709 mm Main spindle travel Y: 1,650 mm Number of workpiece consoles: 8 Drilling unit Total number of drilling spindles: 18 Vertical drilling spindles: 12 Horizontal drilling spindles: 6 Horizontal drilling spindles in the X direction: 4 Horizontal drilling spindles in the Y direction: 2 Milling spindle Motor power: 11 kW Speed: max. 20,000 rpm Tool holder: HSK-F 63 Number of controlled axes: 5 MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Fgjdpfx Ao Ai Emhectoi Phases: 3 Operating hours: 12,371 h EQUIPMENT Drilling unit with 18 spindles Keyway cutter Liquid-cooled milling motor Tool changer with 16 positions Side tool changer with 8 positions PC control

Condition: used, Year of construction: 2020, functionality: unexamined, HOMAG CENTATEQ P-110 V / BMG110/31/F/K, year of manufacture 2020. 5-axis CNC machining center in a moving gantry design. - DRIVE5CS main spindle, 10 kW S6 / 8 kW S1, HSK F63, 1,500–24,000 rpm, liquid cooling - Working area: 3,100 x 1,250 mm for all units at the front stop - Drilling unit: V12/32 High Speed 7500, H4X and H2Y - Grooving saw 0/90 degrees, diameter 125 mm - Tool magazines: 14 positions at the rear and 10 positions linearly on the side - 6 consoles with 1,360 mm length and LED positioning in X/Y - 2 Busch vacuum pumps, each 63 m3/h at 50 Hz - powerControl / powerTouch, 24-inch Full-HD multi-touch - Windows 10 according to manufacturer configuration - woodWOP, DXF import Basic, 3D CNC simulation, MMR and Office Professional listed in the manufacturer configuration; actual versions and transferable license scope subject to agreement - 400 V / 50 Hz Technical specifications according to the original HOMAG configuration. No new functional test guaranteed. Scope of supply, tools, software licenses and availability subject to agreement. Fjde Ai Eg Sjpfx Actegi Price on request. Inspection, disassembly, loading and transport subject to agreement. Contact: DS-Maschinen – Owner David Schulz. Subject to change and errors.

Condition: excellent (used), Year of construction: 2025, Specification: Workpiece Length X: 3100mm Workpiece Width Y: 1250mm (1405mm to back stop) Workpiece Thickness: 260mm including pod 12Kw 5 axis spindle 12 Vertical Drilling Spindles 4 Horizontal Drilling Spindles in the X Direction 2 Horizontal Drilling Spindles in the Y Direction Grooving Saw, can be swivelled 0-90 LED Pod and Rail positioning Aid 10 Position Fixed Lateral Tool Changer 14 Position Rotating Tool Changer Convenience Package Tool Length Check 2 Vacuum Pumps Supply unit for Pneumatic Clamping Elements Fjdpfx Aj Airytsctogi Energy Saving Function Powercontrol with powerTouch woodWop for machine woodMotion simulator for Machine 3 Phase 400V 50Hz CE

Condition: used, Year of construction: 2014, CNC machining center Manufacturer: Homag Type: BMG 512 Year of manufacture: 2014 Technical data - Working area X: 7575 mm - Working area Y: 1900 mm - Working area Z: 300 mm - Independent Z-axes: 2 - Number of milling spindles: 2 - Liquid-cooled milling spindle - Main motor: 18.5 kW in S6 operation, 14.5 kW in S1 operation - Maximum speed: 24,000 rpm - 5-axis spindle - Tool clamping system: HSK-F63 - Tool changing stations: 39 - Pick-up changing station - Tool changer: 2 x 10-position and 1 x 18-position - Number of consoles: 12 - 1 vacuum pump 300 m3/h - Control system: powerControl PC85, Homag power Touch - Software: Homag WoodWop 6.1 Fsdpfxj Aiqrfe Actegi Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, TECHNICAL DETAILS Working area, X-axis: 4,600 mm Working area, X-axis, edge processing: 3,730 mm Working area, Y-axis: 1,535 mm Working area, Y-axis, edge processing: 1,500 mm Panel thickness: max. 225 mm Fsdpfxo Aihynj Actjgi Number of processing stations: 4 Number of rails: 8 Drilling unit Number of vertical drilling spindles: 29 Number of horizontal drilling spindles, X-axis: 8 Number of horizontal drilling spindles, Y-axis: 4 Total number of drilling spindles: 41 Milling spindles Number of milling spindles: 2 Number of controlled axes per milling spindle: 4 Motor power per milling spindle: 12 kW Edge processing Panel height: min. 14 mm Panel height: max. 60 mm Number of edge magazine positions: 4 Horizontal electric spindle Number of outlets: 1 Motor power: 3.5 kW Number of tool positions: 22 EQUIPMENT Console and rail table Drilling unit on top 2 milling spindles on top Automatic tool changer Gluing unit on the main beam of the machine Hot-melt adhesive tank Edge roller magazine with 4 positions Fixed grooving unit on top for grooves in the X-direction Horizontal electric spindle with CNC-controlled positioning Side tool magazine with 22 tool positions Vacuum pump Chip conveyor BiesseWorks Advance programming software Front safety mats CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8804

Condition: used, Year of construction: 2009, power: 42 kW (57.10 HP), TECHNICAL DETAILS Number of vertical drilling spindles: 30 Number of horizontal drilling spindles, X-axis: 6 Number of horizontal drilling spindles, Y-axis: 4 Total number of drilling spindles: 40 Milling spindle Number of controlled axes: 4 Motor power: 12 kW Grooving unit Tool diameter: max. 120 mm Tool magazine 1 Number of tool slots: 22 Tool magazine 2 Number of tool slots: 8 MACHINE DETAILS Width: approx. 4,300 mm Length: approx. 2,200 mm Total installed power: 42 kW EQUIPMENT Drilling unit, top Milling spindle, top Fixed grooving unit for grooving in the X-direction Tool magazine at the rear of the machine Tool magazine on the machining head BiesseWorks programming software Automatic panel loading system Lift table Automatic panel stacking system Motorized transfer Vacuum pump The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Fodpfxs Aihnne Actjgi External reference: 7087

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 10,000 h, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,260 mm, workpiece width (max.): 1,260 mm, workpiece height (max.): 165 mm, number of axes: 3, number of slots in tool magazine: 16, total length: 5,727 mm, total width: 4,060 mm, Equipment: documentation/manual, Biesse Roveer K 1232 CNC Machining Centre – 2014 Fgedpo Aihhlsfx Actji We are offering for sale our 2014 BIESSE ROVER K 1232, a professional industrial CNC machining centre. The machine is currently in daily production, fully operational, and available for inspection and testing under working conditions. Reason for sale: We are upgrading our machinery and replacing this CNC machining centre with a new machine. Operation and Maintenance The machine has been operated on a single-shift schedule, 5-6 hours per day, 5 days per week. It has an estimated 10,000–15,000 operating hours. Regular maintenance has been carried out throughout its service life, and the machine has not experienced any major issues. Only genuine BIESSE spare parts have been used for maintenance and repairs. The machine is currently installed and operating in our production facility, allowing potential buyers to inspect and test it under real production conditions. Location: 4341 Nyírvasvári, Hungary Asking price: €37,500 For further information, detailed technical specifications, additional photos, or to arrange an inspection, please feel free to contact us. Technical details: ROVER K 1232 Year: 2014 Working fields: X= 3260 mm; Y = 1260 mm; Z = 165 mm; Vector speed: 84 m/min Length of the working tables (not included) = 1200 mm EC Safety devices with safety mats Wired remote keyboard 6 ATS panel supports - L = 1200 mm - 24 sliding bases 6 Back line stop with a stroke of 96 mm 6 Middle line stop, positioned at 630 mm 4 Side stops with a stroke of 96 mm (2 Lh + 2 Rh) 12 Clamping units for narrow pieces with mechanical locking 4 Lifting bar supports for ease of loading 90 m3/h rotary vane vacuum pump 18 vacuum module - Size 132x146 - H29mm 3 vacuum module - Size 132 x 75 x 29 mm 3 vacuum module - Size 132 x 54 x 29 mm Automatic lubrication system 13.2 kW (17.7 HP) Electrospindle with HSK F63 adaptor and air cooling 360° rotation interpolating unit – Torque C-Axis Blowing unit for electrospindle BH30 2L Boring Head with automatic lubrication Heat exchanger unit for liquid-cooled systems 16-position Revolver Toolchanger, positioned on the X-axis carriage HSK F63 Aggregate with 1 outlet, collet coupling, or sawblade with a maximum diameter of 180mm 180 mm sawblade for manually tiltable aggregate and 2 spindles for horizontal routing or sawing BiesseWorks Advanced - Machine version; requires the numerical control BH660 BiesseWorks Advanced - Office version; 2 hardware protection keys included

Condition: used, Year of construction: 2005, power: 23 kW (31.27 HP), travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,900 mm, TECHNICAL DETAILS Working area X-axis: 3,390 mm Working area Y-axis: 1,570 mm Travel range X-axis: 4,400 mm Travel range Y-axis: 1,900 mm Panel passage: max. 250 mm Number of processing stations: 2 Fodpfj Aihdtex Actegi Number of controlled axes: 4 Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Feed rate Z-axis: 25 m/min Number of rails: 8 Number of vacuum cups: 24 Drilling unit Number of vertical drilling spindles: 22 Number of horizontal drilling spindles X-axis: 6 Number of horizontal drilling spindles Y-axis: 4 Total number of drilling spindles: 32 Milling spindle Number of controlled axes: 4 Motor power: 13.5 kW Speed: 18,000 rpm Grooving unit Tool diameter: max. 120 mm Motor power: 1.7 kW Speed: 6,500 rpm Horizontal electro-spindles Number of outputs: 2 Motor power: 3.5 kW Speed: 12,000 rpm Number of tool positions: 10 MACHINE DETAILS Suction capacity of vacuum pump: 250 m³/h Total connection power: 23 kW EQUIPMENT Console and rail table CNC-controlled positioning of the rails CNC-controlled positioning of the vacuum cups Vacuum pump Drilling unit, top Milling spindle, top Automatic tool changer Fixed grooving unit in X-direction Horizontal electro-spindles Tool magazine at the rear of the machine Chip conveyor Windows control system BiesseWorks programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 8377

Condition: used, The CNC machine is in excellent condition, and all the vacuum cups are new. Fjdps Aib Uwjfx Actegi

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Work area X: 4580 mm Work area Y: 1850 mm 5-axis electrospindle Number of drilling heads for vertical drilling: approx. 24 Number of drilling heads for horizontal drilling X: 4 Number of drilling heads for horizontal drilling Y: 2 33-position chain-type tool changer 1-position tool changer for saw blades Worktable with 8 rails Software: BiesseWorks Remote control panel 1 vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety mats Fedpfxo Ah R Eij Actjgi Lateral safety guards Includes suction cups, some Uniclamps, and some HSK collets.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Speed: max. 24,000 rpm Tool interface: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Vertical drilling spindles: 16 units Horizontal drilling spindles in X-direction: 4 units Nut sawing units: 2 units Tool positions: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Software: Windows 10, Biesse Works, NC-HOPS license Motor power: 5.5 kW Fgedpfj Ah Rhqsx Actei Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: used, Year of construction: 2006, HOMAG OPTIMAT BOF 211 / VENTURE 12XL, manufactured in 2006. 4-axis CNC machining center with a moving table, water-cooled main spindle, HSK-F63 tool holder, 30-position chain-type tool changer, and drilling head with 12 vertical drilling spindles. Control system: HOMAG powerControl PC85, woodWOP 7.2, updated operator panel with Windows 7. Scope of supply: Vacuum pump, clamping devices and edge clamps, selection of vacuum cups, as well as ceiling/projection laser. Not included: Machining and adapter units, tools, and lifting conveyors. Fjdpfxj Ahzqhe Actjgi Inspection by appointment only. Price upon request.

Condition: used, Year of construction: 2012, HOMAG BOF 211/52/AP with TBA 330, manufactured in 2012. CNC machining center with automatic loading and extensive clamping devices. Scope of supply: - Flex5 Plus (Flex5+) - Mortise unit - Four-spindle unit - All vacuum cups present on the machine, including the separately stored cups - TBA 330 loading system Multi-spanners are not included in this offer and are sold separately. Known service points: partially defective safety step mats; one drilling spindle on the MPU drilling head remains extended; the filter in the vacuum device is missing or has fallen inside. Sold in the condition as described. Available for dismantling from February 17, 2027. Inspection by appointment. Price on request. Fgodpfxs Ahzqds Actoi

Condition: used, Year of construction: 2007, Morbidelli / SCM Author X5 44 EVO, manufactured in 2007. 5-axis CNC machining center with a console table and vacuum clamping system. Working area X × Y during milling: 4,400 × 1,780 mm Console depth: 1,500 mm Milling and drilling operations Fgedpfx Ace Ahzqaotoi Tool magazine and automatic tool changer Separate control panel with screen and handheld device Vacuum pump Machine weight according to the nameplate: approx. 5,000 kg Xilog Plus 1.13.988, as shown in a screenshot from 2023. Expected availability from December 2026. Images from 2023 and April 2026; PC/software photos and video recordings from 2023. Scope of supply and viewing by appointment. Price upon request.

Condition: good (used), Busellato Jet 5 XL 2 electrospindles 2 tool changers Working area: 5630 x 1890 mm Fgjdpfx Ao Ahwr Uectoi

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 22.07.003.23, power: 11.5 kW (15.64 HP), overall weight: 3,490 kg, Equipment: saw blade guard, Felder Format 4 KA3232C Machine Number 22.07.003.23 Year of Construction 2023 Cutting length 3.200 mm Pusher stroke 3.200 mm Number of grippers 6 Feedrate max 40 m/min Continuously variable feed Saw blade projection 67 mm Saw blade diameter max 320 mm Main motor power 7,5 kW Fgede Ahumpspfx Actoi Scoring saw Yes For sensible workpiecesClamping pressure adjustable Stop side Left Control Touchscreen CE mark Total connection 11,5 kW Weight 3.490 kg Space requirement Length 6,47 m Space requirement Width 5,3 m Space requirement Height 1,8 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, operating hours: 30,600 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 110 mm, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 2,900 kg, table length: 2,700 mm, table width: 1,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It has a working area of 2700 x 1200 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking for high-quality CNC processing capabilities, Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min Vector speed: 40 m/min Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) Main spindle: HSK-63 Tool magazine: FAST CHANGE 4 POSITION Tool magazine: BACK CHANGE 4 POSITION Machine Height: 2680 mm Machine Length: 5570 mm Machine Weight: 2900 kg Machine Width: 2500 mm Number of Axes: 3 Spindle Power: 6.6 kW Fgedpfx Aj Ahukiectji Spindle Speed: 18000 RPM X-axis Travel: 2980 mm Y-axis Travel: 1280 mm Z-axis Travel: 200 mm

Condition: used, Year of construction: 1999, CNC machining center Manufacturer: Homag Type: BAZ 31/60/K Optimat Year of manufacture: 1999 Technical data - Workpiece length max. 6600 mm with single workpiece placement max. 2700 mm with alternating workpiece placement - Workpiece width max. 1200 mm - Workpiece thickness with edge max. 60 mm without edge max. 60 mm with standard clamp without edge max. 120 mm with clamping template when chamfer milling min. 12 mm when radius milling min. 2x radius + 10 mm Fodpfx Ae Ahmz Doctjgi - Working height, lower edge of workpiece 950 mm - 2 vacuum pumps, each with 66/100 m3/h for clamping system Main spindle 12 kW, water-cooled - for HSK F63 - Three-phase asynchronous motor 12 kW at S1, 600 Hz - Speed range: 1500 - 18000 rpm - Tool weight max. 6 kg incl. tool holder Tool changer, 12 positions - for tools and aggregates with HSK F63 - 12 x diameter max. 130 mm or - 6 x diameter max. 180 mm and 6 x diameter max. 70 mm - Tool diameter for grinding tools max. 200 mm Aggregate interface BAZ for main spindle For accommodating the machining and gluing aggregates with integrated pneumatic-electrical-electronic supply and pivoting drive, C-axis. Swiveling range without limitation. Hose-free compressed air supply. Drilling head with 17 spindles - 1 motor 1.9 kW, frequency-controlled - Speed selectable via program 4500/6500 or 8000 rpm - Each spindle can be activated individually - Arrangement of spindles in T-shape. - 11 spindles in X-direction, 7 spindles in Y-direction Homatic control system CNC programming system WOODWOP Postprocessor Programming based on CNC drawing Laser positioning aid for vacuum clamping system Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), IMA BIMA QUADROFORM C80/280.01 – Industrial CNC Machining Center For sale: an industrial CNC machining center manufactured by the German company IMA Maschinenfabrik Klessmann GmbH, model BIMA QUADROFORM C80/280.01. Identification data: Manufacturer: IMA Maschinenfabrik Klessmann GmbH Model: BIMA QUADROFORM C80/280.01 Year of manufacture: 1996 Serial number: 20550 Type: industrial CNC machining center Purpose and capabilities: The center is designed for the industrial machining of furniture components and wood-based materials. Typical operations performed on this type of machine: milling, drilling, grooving, contour machining, sizing of components. Equipment visible in the photos: structure and working unit of the CNC center, worktable with material clamping elements, Fgodpfxe Ahlzaj Actei machining units and working heads, control cabinet, operator panel. Technical condition: The machine is in good working order. The equipment can be inspected on site. The sale includes the machine with the equipment visible in the photos.

Condition: used, Weeke Venture 06M machining center X-axis: 3130mm Y-axis: 1250mm Z-axis: 85mm 18 drilling heads (12 vertical and 6 horizontal) HSK milling spindle, 9kW 8-position tool magazine Grooving saw Fgedj Ahiuhepfx Actei Machine available immediately. Loading included in the price.

Condition: new, Year of construction: 2026, Specifications Working area: X 2100mm Y 3100 mm, X 2100mm Y 4100 mm Z-axis range: 300 mm Table type: slatted, vacuum Vacuum sections: 6 manually controlled sections Drives: 1.5 kW Servo AC Ethercat Travel speed: up to 40 m/min Control system: Industrial controller, Ethercat communication with remote access Electro-spindle set: 9 kW Tool clamping: ISO30 collet Tool magazine: 12 positions Tool length sensor: YES Positioning bases: 5 pcs Dust extraction foot: with outlet for connecting a dust extraction system/vacuum cleaner Manipulator: manual, wired Cooling mist: YES Central oil lubrication: YES CAD/CAM software: YES Access enclosure: including a laser safety curtain Fgedpfx Ae Ahibljctsi Additional options: Vacuum pump or side-channel blower Different electro-spindle powers Different working table size Push-and-dust extraction bar Revolver magazine Oscillating knife head 4th axis, angular heads Drilling units

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-axis machine with a table length of 4,469 mm in the X-axis and 1,560 mm in the Y-axis, including 2 tool changers. Working dimensions: Fodpfxo Agu Ako Actegi X-axis: 4,469 mm Y-axis: 1,560 mm Z-axis clearance: 180 mm Work table: 8 workpiece supports 8 rear workpiece stops, programmable, installed in each support 8 middle workpiece stops, programmable, installed in each support, positioned approximately 520 mm from the rear 1 + 1 lateral workpiece stops Lifting rails, pneumatic, programmable, for positioning heavy workpieces Vacuum pump 250 cbm/h Equipment for machining head: Drilling head with: 18 vertical drilling spindles, each individually controllable 2+2 horizontal drilling spindles in the X-direction 2+2 horizontal drilling spindles in the Y-direction Fixed nut saw in the X-direction 5-axis milling spindle 11 kW, HSK 63 F Rotational speed 1,000 - 24,000 rpm Bidirectional rotation Saw blade diameter, max. 300 mm Tool magazine, 12 positions, mounted on the machining support, moving in the X-direction Tool magazines, 10 positions, mounted laterally on the machine table on the left side Safety devices: * Support equipped with a bumper system * Protective fence on the side, rear, and left with an access door Control system: XILOG MAESTRO Without tools and aggregates Additional equipment: * Handheld terminal for controlling basic functions, such as manual movement, feed rate, and milling spindle speed

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Fjdpfx As Aggu Aoctogi Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Fgedpfx Ae Af Ii Nsctoi Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Y-axis 1,250 mm Work table: Fgodpo Afh Izofx Actoi 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: ----- * Foot mat protection in front of the machine Without tools