Twence

Year of construction: 2001, condition: used, functionality: fully functional, Compost turner BACKHUS 10.10. Hsdpfszudwtsx Abisfk Diesel engine: 264 hp Weight: 14.9 tons

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Hjdpfx Abozt Ipksisfk Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Year of construction: 2026, condition: like new (used), Big bag frame Hsdsztzhaspfx Abiofk

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, - Year of manufacture: 1999 - In very good condition, immediately ready for operation - 3 compression stages - Package size: 300 x 300 mm Hfedpfoztxdrjx Abisk More detailed technical data is available upon request.

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused Hfjdpfx Aoztmxqsbiek

Condition: used, functionality: fully functional, 2-shaft forced-action mixer Working dimensions (internal) approx. 3,500 x 900 mm 132 kW electric drive with heavy-duty gearbox New electric control cabinet Steel construction Hodpfx Abszr Hfusiofk

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, total height: 1,520 mm, total width: 1,000 mm, total length: 1,800 mm, overall weight: 700 kg, Cable stripping machine Pecher PR3 Evolution Completely overhauled in 2026. Condition: as new. Motor power: 4 kW / 380 V Stripping speed: 44 m/min Working range: 1.5 mm² – 90 mm Ø Weight: approx. 700 kg Dimensions: W 1000 x L 1600 x H 1520 mm Hfjdpfx Abozry Eueisk

Condition: used, machine/vehicle number: 13391, Length of magnetic grinding table = 1300 mm Drive = 13.5 kW Hsdpfx Aszrikyobiofk Magnetic table can be swiveled Ideal for re-sharpening rotor and stator blades Water cleaning with filter cloth

Year of construction: 2001, condition: ready for operation (used), Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible. Hfsdpjzp Rhbsfx Abiek

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Hedpfx Aszp H R Esbisfk Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Trough inner width 600 mm. Drive via geared motor with 4.0 kW. Hjdjzn N Udopfx Abijfk

Year of construction: 2025, operating hours: 300 h, condition: excellent (used), functionality: fully functional, EYS 5 screening machine, model year 2025, with very few operating hours; fully functional and ready for work. Hfodpfezn H U Usx Abijk

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. Hsdpezmqv Hsfx Abijfk It was operating 2-4 hours during test run. The whole system is in new state.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 323, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Used but fully functional screw compactor model Runi SK240. Have been used to compact and dewater plastics. New control cabinet in 2024. Operating hours < 1000 as it has been used in R&D before purchace of SK370. The screws hardfacing needs a re welding as it is worn on the outside. This is part of regular maintainence. Motor, bearing and gear sound great. Can be show in operation. Hfjdezmp Izepfx Abiok

Condition: ready for operation (used), Press force: 420kN, specific pressing force: 60N/cm², motor power: 22kW, max. theoretical throughput: 2000kg/h, filling height: 950mm, bale dimensions: 1000x720x1200mm, max. bale weight: 600kg, width: 2000mm, height: 2150mm. An on-site inspection is possible. Hfodozk Naropfx Abiok

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, The machine is operational. Sandblasting and repainting of the paintwork and other parts are available for an additional charge upon request. Serviced. Last service: April 2025. Operating manual available. Hfodpozkrrwjfx Abijk Deutz 6-cylinder engine, 240 hp. Dimensions (length/width/height): 3.45/4.65/3.35 m. Operating dimensions: Wavelength 3.88 m, diameter 1.0 m. Weight: approx. 10,000 kg. Delivery rate: 300–2,500 m³. Mileage: unknown, odometer defective. Upon request, we will gladly send you a short video of the machine in operation.

Year of construction: 2020, condition: ready for operation (used), A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible. Hodpfezfp Hzsx Abiofk

Year of construction: 2021, operating hours: 2,800 h, condition: excellent (used), Loading ramp, dimensions L x W x H: 10,000 x 5,000 x 950 mm in excellent condition, hardly used Hfodpozffu Ijfx Abisk very robust construction

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. Hfodpfxszcyrwj Abiek The shears are brand new, manufactured in 2024, but have never been used. Includes a complete service kit.

Condition: used, Article: Chip processing system Manufacturer: Lanner Type: Vetamat DS32 Yob: 2010, in 2025 completely refurbished The patented Vetamat system reliably separates metal chips from coolant. The systems achieve a throughput of up to 2,000 kg/h. The complete systems include a centrifuge, a chip conveyor with tank, a sump, and a control system. Depending on the type of material, you can choose between a parabolic centrifuge or a scraper-bottom centrifuge. Thanks to the modular system, the Vetamat system can be optionally expanded with a chip crusher, a large-part sluice, or a lifting & tipping device, as well as coolant treatment. - Very short commissioning time - Turnkey design - Minimal space requirements - Excellent accessibility - Modular system - Mounted on a WHG-compliant oil-tight sump Hjdszcyfwspfx Abiofk - High operational reliability - Proven Lanner technology - Fully automatic operation with standby function - Expandable for long chips and coolant cleaning - Chip container under the centrifuge can be loaded from three sides Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Floating pontoon made from gravel extraction. Hsdozck A Topfx Abiefk

Year of construction: 2018, condition: good (used), For sale: a machine for pelletizing. ARtechnic PBPe.500x-k. Hedpfxsy T Itxe Abisfk

Condition: used, overall weight: 10,000 kg, power: 55 kW (74.78 HP), Electro-Hydraulic orange peel grab, 6tines, weight 10000kg, about 6m3, with radiation meter Hfodpfoy Ia H Tsx Abiek

Condition: new, This machine can process cables up to 120 mm in diameter – at a rapid 40 meters per minute! A 400-volt power supply and 3 kW output require a three-phase connection. Despite its lightweight construction of only around 220 kg, the machine stands independently and is about the size of a tall household appliance. Key feature: ultra-fast processing of cable diameters between 20 mm and 120 mm. Technical data: Width: 68 cm | Depth: 59 cm | Height: 130 cm | Weight: 220 kg | Speed: 40 m/min | Voltage: 380 V | Power: 3 kW | Cross-section: 20–120 mm Hfodpfxsy H Ikwo Abisk

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Diesel engine: 264 hp Hfedpfx Abjy Equ Heijk Weight: 14.9 t Current videos can be provided upon request.