HT Hanseatische Industrie-Consult GmbH & Co. KG

Year of construction: 1970, condition: ready for operation (used), Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible. Bwjdpexuittsfx Abcsw

Year of construction: 2004, condition: ready for operation (used), Turning diameter: 32mm, max. turning length: 310mm, speed: 6000rpm, power: 5.5kW, bar capacity: 32mm. Machine dimensions X/Y/Z: approx. 2700mm/1600mm/1600mm, weight: approx. 3800kg, control: Fanuc. Including bar feeder FMB turbo 3-36/3200 C, year of manufacture: 2004, chip conveyor Knoll 320 S-1, year of manufacture: 2003, and CO2 fire extinguishing system Siemens, year of manufacture: 2004. Documentation available. An on-site inspection is possible. Bjdpsxt Rm Eofx Abcjww

Condition: used, Ser. No. A60/6094, Ser. No. A56/3985, Ser. No. 2303 (only one shared control unit available) Bwedpfx Abjxt Nnhocew +++ Attention: These 3 machines are part of an online auction! +++

Condition: ready for operation (used), A VICTOR lathe 500x1000. Distance between centers: 830mm, center height over bed: 250mm, max. turning diameter: 500mm, longitudinal travel: 800mm, spindle bore: 80mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1200mm, weight: approx. 1500kg. An inspection can be arranged by appointment. Bsdjxtprmspfx Abcsww

Year of construction: 1980, condition: ready for operation (used), Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible. Bwedpsxtpraefx Abcow

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Bwjdoxr Nvcspfx Abcew

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Bodpfx Aboxr Nviscoww

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible. Bwodpfxjxruizs Abcsw

Condition: ready for operation (used), total length: 10,700 mm, total width: 3,700 mm, Beiteldraaibank - met 2 beweegbare beitelgeleiders - voor elektromotoren, pompen, ankers etc. Beweegbare centra Dwarsslede: 500 mm verstelbaar Middenhoogte: 1000 mm (eenvoudig instelbaar) Met Asea-motor 31 kW (variabele snelheid) Bjdpfexrhcnjx Abcjww Distance between centers: 7300 mm Swing over bed: 3400 mm (expandable) Swing in gap: 3400 mm Power on main spindle: 30 hp Number of speeds: 9 -> 27 rpm Chuck (3/4 pinch) -- diametre: Ø 2550 mm Max weight between centers: 12000 kg

Year of construction: 1978, condition: ready for operation (used), A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible. Bwodpfx Absxq Ex Dscsw

Year of construction: 2018, condition: ready for operation (used), A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible. Bodpexq Exkofx Abcsww

Year of construction: 1982, condition: ready for operation (used), A conventional screw-cutting lathe Boehringer is available. Swing over bed/cross slide: 690mm/415mm, distance between centers: 1500mm, cylindricity deviation (tapered) over 100mm: 0.15mm, roundness deviation: 0.02mm, total runout: 0.02mm, perpendicularity deviation over 200mm: 0.05mm, chuck diameter: 630mm-700mm. An on-site inspection is possible Bwsdpsxq Ex Refx Abcsw

Year of construction: 1971, condition: ready for operation (used), A heavy face lathe Ravensburg is available. Center height: 600mm, faceplate diameter: 800mm, turning diameter over bed/cross slide: 900mm/1200mm, max. turning length: 600mm, max. workpiece weight: 350kg, weight: approx. 6100kg. An on-site inspection is possible. Bjdpfx Aboxq Eynjceww

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Bwjdoxq Eyuspfx Abcew

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Bwodpfsxq Eyzox Abcjw

Condition: good (used), Year of construction: 2000, Heavy-duty lathe ERNAULT SOMUA P72 with 3 guideways Bwjdpfxsxq D Tyj Abcew diameter over bed 2200mm diameter over carriage 2000mm speed 1.5 to 3000rpm - 75 HP machine weight 39t admitted weight 16t machine visible in operation

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Bwodpfx Asxqqmtjbcew

Year of construction: 2007, condition: ready for operation (used), Swing diameter over bed/cross slide: 1100mm/730mm, turning diameter: 1130mm, spindle bore: 128mm, rapid traverse: 5m/min, quill diameter: 140mm, quill stroke: 300mm, center height: 550mm, distance between centers: 3000mm, max. workpiece weight: 6000kg. Machine dimensions X/Y/Z: approx. 6700mm/2600mm/2300mm, weight: approx. 10500kg, control: Siemens, operating hours: 67647h. Documentation available. An on-site inspection is possible. Expected to be available from 2026. Bjdpexph N Njfx Abcsww

Year of construction: 2005, condition: ready for operation (used), Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible. Bodpsxph Rajfx Abcsww

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Bodpfx Abexph Sqscsww

Year of construction: 1999, condition: ready for operation (used), A lead and feed screw lathe Stanko with a 2-axis digital display Heidenhain is available. Distance between centers: 750mm, center height: 200mm, turning diameter over bed/support: 400mm/220mm, spindle bore: 45mm, spindle taper: MK6, speed: 2000rpm, chuck diameter: 200mm, tool positions: 4. Machine dimensions X/Y/Z: approx. 2300mm/1150mm/1550mm, weight: approx. 2100kg, control: 2-axis digital display Heidenhain. Including machine feet, digital display, and 2–3 tool holders. Documentation available. An on-site inspection is possible. Bsdpfx Abjxn S T Ascoww

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Bwodpjxmkcasfx Abcew

Condition: good (used), Tosch lathe Bwjdpfexmic Ejx Abcjw

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Bwedsxl Tt Sspfx Abcew Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: ready for operation (used), Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible. Bodpfjxliufsx Abceww