Plastdecor

Condition: good (used), Year of construction: 2016, For sale is a package of three well-maintained injection moulding machines. The machines are in good technical and visual condition and have been regularly serviced. Overview of the machines: Machine 1: Haitian MA600 II/130 eco, Year of manufacture: 2016, Clamping force: 60t Machine 2: Wittmann Battenfeld EcoPower 110/350, Year of manufacture: 2011, Clamping force: 110t Njdpfxoyxiq Ne Ab Eokw Machine 3: Demag Ergotech 1000/500-600, Year of manufacture: 2007, Clamping force: 100t All machines are immediately ready for operation. Machines are available! Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2008, Wittmann-Battenfeld HC 400/2250 S Year of construction 2008 Unilog B6 control system Operating hours: approx. / (pump) Screw diameter 65 mm Fuel weight: approx. 980gr/hp Distance between tie bars 900 x 710mm Extras: Core pull Handling interface Battery incl. Battenfeld Handling R10 Nksdpfsyxiawex Ab Esw Machine weight: 20.000kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • Drive unit with 30 kW motor • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) Nodoyxdwdopfx Ab Ejkw • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133477-100, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1,735 bar, injection weight: 183 g, mold height (min.): 250 mm, ejector stroke: 140 mm, opening stroke: 500 mm, plate length: 670 mm, plate width: 670 mm, total length: 4,500 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,500 kg, heating capacity: 11.4 kW (15.50 HP), pressure: 275 bar, pump power: 18,500 W, power: 38 kW (51.67 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 80 A, Model: HM 110/350 UNILOG B6E Machine No.: 133477-100 Year of construction: 2011 Nkedpfeyw Udxox Ab Eew Weight: 4500 kg Hydraulic system pressure: 275 bar Wiring diagram No.: HMB6E133477-100 Largest motor FLA: 33.4 A Control voltage: 24 V DC Electrical: 400 V, 80 A

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 131703-100, clamping force: 1,500 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1,866 bar, injection weight: 358 g, mold height (min.): 250 mm, ejector stroke: 160 mm, opening stroke: 600 mm, plate length: 740 mm, plate width: 740 mm, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,100 kg, heating capacity: 13.9 kW (18.90 HP), pressure: 210 bar, pump power: 22,000 W, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 88 A, Type: Hydraulic Injection Molding Machine Model: HM 150/525 Max. Motor Rated Current(Largest MTR FLA): 40 A Nodpjyw Uchsfx Ab Eokw Control Voltage: 24 V DC Rated Voltage: 400 V (3-phase) Rated current: 88 A Max. fuse rating: 100 A Frequency: 50 Hz Short-circuit rating(SCCR): 6 kA Year of construction: 2010 Weight: 6100kg Control system: Intergrated Battenfeld control with touch-screen panel Manufacturer: Wittmann Battenfeld

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 135930-100, clamping force: 4,000 kN, screw diameter: 55 mm, clearance between the columns: 800 mm, column diameter: 125 mm, displacement volume: 546 cm³, injection pressure: 2,041 bar, injection weight: 497 g, mold height (min.): 350 mm, ejector force: 65,000 N, ejector stroke: 200 mm, opening stroke: 780 mm, plate length: 1,160 mm, plate width: 1,060 mm, installation height: 1,130 mm, total length: 7,650 mm, total width: 2,150 mm, total height: 2,300 mm, overall weight: 14,400 kg, heating capacity: 23.1 kW (31.41 HP), pressure: 240 bar, power: 45 kW (61.18 HP), Model: TM 400/1330 Year: 2014 Manufacturer: Wittmann Battenfeld Country of origin: Austria Weight: 14,000 kg Clamping force: 4000 kN (400 tons) Hydraulic system pressure: 250 bar Nkodpfx Aboyw T Txe Eow Control system voltage: 24 V Power supply: 50 Hz, 3-phase Largest motor FLA Electrical cabinet: includes servo drives, safety relays, and hydraulic control boards

Condition: good (used), Year of construction: 2012, operating hours: 26,000 h, functionality: fully functional, clamping force: 3,000 kN, overall weight: 20,000 kg, ENGEL Victory 1350/300 tech for sale as per photos. The machine is in very good condition and was only used for samples and small series. - Year of manufacture: 2012 - approx. 26,500 operating hours - weight: 19,900 kg - machine number: 183151 - ejector - Motan vacuum conveyor Further information to follow. Dismantling and loading can be carried out by our team. If you have any questions, please feel free to contact us at any time. Nedsyw Td Rjpfx Ab Eskw

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, clamping force: 3,000 kN, overall weight: 20,000 kg, ENGEL 1560/300 tech injection molding machine for sale as shown in the photos. Nkodpoyw Tcmofx Ab Esw The machine is in perfect working order, very well maintained, with only approx. 10,200 operating hours! - Year of manufacture: 2017 - 10,200 operating hours - 20,600 kg - Motan vacuum conveyor - Viper 20 handling system - Conveyor belt Further data to follow. Disassembly and loading can be carried out by our team. If you have any questions, please feel free to contact us at any time.

Condition: used, Year of construction: 2003, Arburg injection moulding machine available for immediate purchase. Machine is still in operation. Viewing possible upon appointment. Nksdpfx Aoyw Snbjb Eew Full technical details in the attached documents/pictures. Clamping force (max.): 3200 kN Mold opening force (max.): 130 kN Opening stroke (max.): 700 mm Ejector force (max.): 100 kN Ejector stroke (max.): 250 mm Screw diameter (mm): 60/70/80 Effective screw length (L/D): 23/20/17.5 Shot volume (cm³): 792/1078/1407 Injection pressure (bar): 2500/2000/1530 Injection flow (cm³/s): 224/306/400 Distance between platens (max.):: 1000–1400 mm

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Nkodpjyw N H Isfx Ab Ejw Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Nedpfxsyw N Hus Ab Eokw Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2007, Patented tie-bar-less clamping system, screw diameter 70 mm. Fully operational. We are winding down our production. Njdpfxsyw Hyxo Ab Eekw

Condition: used, Year of construction: 2010, operating hours: 60,000 h, Patented tie-bar-less clamping system. Screw diameter 55 mm. We are closing down our production; we have two of these machines available, both in full working condition. Nodoyw Hwqopfx Ab Eskw

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Nedpfeyv E Nvjx Ab Eekw Platen movement force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is an excellent candidate for ESS retrofitting (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,708 h, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, total length: 11,810 mm, total width: 3,200 mm, total height: 2,900 mm, Clamping force: 8000 kN Tie bar spacing h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Min. mold height: 500 mm Max. mold height: 1100 mm Max. daylight: 2100 mm Opening stroke: 1600 mm Screw diameter: 135 mm Shot volume: 8870 ccm Injection pressure: 1640 bar Equipment Screen text in German Screen text in English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling Machine including safety enclosure Machine with water manifold EUROMAP 12 interface Handling interface USB interface Mold heater 16x Handling Technical Data Type of handling: Linear Brand: ENGEL Model: ERC 64/1-F Handling weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm Nodpfoyv E Hbjx Ab Eekw Machine dimensions LxWxH: 11.81 m x 3.2 m x 2.9 m Total weight: 56,000 kg

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 160–1000 CX Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 160–1000 CX Year of Manufacture: 2012 Operating Hours: 57,654 hours Category: Hydraulic Injection Moulding Machine 🔧 Clamping Unit Clamping Force: 1,600 kN (160 tons) Platen Dimensions: 820 × 845 mm Tie-bar Distance: 520 × 520 mm Minimum Mold Height: 300 mm Maximum Opening Stroke: 950 mm Nksdsyv E E Dopfx Ab Eow 💉 Injection Unit Screw Diameter: 50 mm Injection Volume: 432 cm³ Shot Weight: 393 g Injection Pressure: 2,304 bar ⚡ Electro-hydraulic System Pump Motor Power: 37 kW Heater Power: 18.7 kW 👉 Option to install Energy Saving System (ESS) – actual energy consumption reduction by up to 30–60% 📐 Dimensions & Weight Machine Weight: 9 tons Dimensions (L × W × H): 5.54 × 2.06 × 2.18 m

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Njdpoyv E Daefx Ab Eekw Screw diameter: 60 mm Shot volume: 769 ccm Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg

Condition: refurbished (used), Year of construction: 2008, operating hours: 26,033 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm Nedpfjyv Ez Esx Ab Eekw screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Nkjdpfxoyv Embj Ab Esw Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine l x w x h: 6.5m x 2.2m x 2.3m Nedsyv Elwopfx Ab Eokw total weight: 15000KG

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC Nedpsyv D T Tofx Ab Ejkw measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm Njdpfxjyv D Hge Ab Ejkw min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: used, Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 156 cm³, injection pressure: 2,429 bar, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 850 mm opening stroke: 400 mm screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator Njdpjyv Dvbefx Ab Eskw machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm Nkjdpfx Abeyvzyqo Esw size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing Anti vibration mounts measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 X axis: 400 mm Z axis: 1400 mm C axis rotation: 90 ° total weight: 450 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CompactFlash interface for data storage core pulling hydraulically 1x Njdpfx Ajyvzyksb Ejkw air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG