Boge Kompressoren

Condition: good (used), Year of construction: 2015, functionality: fully functional, CompAir L45RS-13A Screw Compressor (45 kW / 13 bar) + ALMiG Screw Compressor (Year 2020) – Package or Individual Sale Manufacturer: CompAir / ALMiG Offer: Two compressors from ongoing operation are for sale. Purchase as a package or individually possible. Both units are operational and in very good condition. 1) CompAir Compressor (Gardner Denver) Model: L45RS-13A (Version V2) Year of manufacture: 07/2015 Motor power: 45 kW Flow rate: 8.02 m³/min Operating pressure: 13 bar(g) Voltage: 400 V / 3~ / 50 Hz Medium: Air Operating hours: approx. 46,9xx h (as per display) 2) ALMiG Compressor Manufacturer: ALMiG Year of manufacture: 2020 Model/type: on request (nameplate data to follow) Condition: operational / very good condition Sale / Delivery Sale: Package price for both compressors or individual sales possible Kwodpfx Ajycl H Tjaxst Location: by arrangement Inspection/test run: possible Delivery: Ex works (EXW), loading by arrangement Price: Unit price (package) negotiable – individual prices on request.

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Kwjdpfxoychbae Aaxet Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features That Distinguish These Models 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels compliant with IE4 or even IE5 standards Maintain high efficiency even at very low rotational speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an “all-or-nothing” (load/unload) mode. If your system requires only 30% capacity, the compressor reduces its speed and consumes proportionally less energy. Elimination of idle running: Traditional compressors often continue running for several minutes after the tank is filled, consuming approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this energy loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the electrical installation in the facility Allows frequent start/stop cycles without the risk of winding overheating 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the air network (with accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutting machines. Ksdsycg Ufepfx Aaxswt Extended service life: The absence of sudden pressure and temperature spikes significantly extends the lifespan of the screw element. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1600 mm Weight: 350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER Kwedpfxoycg Tnj Aaxet SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1440 mm Weight: 290 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Kjdpfeycg Rysx Aaxowt Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Kwodpfxjycg I Ss Aaxst Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: used, Year of construction: 2016, operating hours: 4,248 h, machine/vehicle number: CAI955518, Technical Data: Kodeycg Hhjpfx Aaxowt - Operating hours: 4248 h - Load hours: 1978 h - Operating pressure: 10 bar - Free air delivery: 3.34 m³/min - Drive: 400 V / 22 kW - Motor speed: 3000 rpm - Required space approx.: W 1300 x H 1250 x D 800 mm - Weight approx.: 490 kg

Condition: used, Year of construction: 2012, Screw compressor MARK MSA 15 Max. operating pressure: 10 bar Kwedpfx Ajycfxveaxet Complete with refrigerant dryer and 500 L compressed air tank Weight: 445 kg Motor: 15 kW Air delivery: 119 m³/h Connection: 400 V, 3-phase

Condition: like new (used), For sale is an almost as-new, frequency-controlled screw compressor designed for medium to large compressed air requirements. The unit was only connected and tested, but never used in actual operation. (30 operating hours) Technical Data Machine type: Oil-injected screw compressor, sound-insulated, frequency-controlled Manufacturer: HERTZ Kompressoren Model: FRECON 22 Compact Year of manufacture: 2023 Operating hours: approx. 30 h Rated power: 22 kW Maximum pressure: 10 bar Effective free air delivery: 1.30 – 3.80 m³/min at 10 bar Voltage: 400 V / three-phase Noise level: 71 dB(A) Dimensions: 1900 × 850 × 1435 mm Features & Technology - Frequency-controlled drive for demand-oriented operation - Direct-driven, air-cooled TEFC IP55 motor - Digital controller Logic 26S – easy to operate and monitor Included: - Refrigerant dryer - 2 × 300 liter compressed air receivers Condition: Like new - Ordered by mistake Kwjdpfjycdpgex Aaxet - Only connected and tested - Technically flawless – ready for immediate use Manufacturer's RRP: €19,900 net plus VAT Now: €8,900 Inspection: possible by appointment Delivery: can be arranged If interested, simply write or call:

Condition: new, Year of construction: 2026, CORMAK LUFT 1000 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 1000 VSD+PM screw compressor is the perfect solution. With a power output of 7.5 kW and an impressive actual air delivery of up to 990 l/min, it provides a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting equipment. This 400V-powered model is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable performance. The LUFT 1000 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution ensures stable operation and long service life by providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor data and enhancing flexibility and process control. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 l/min Air delivery at 6 bar: 990 l/min Air delivery at 8 bar: 950 l/min Air delivery at 10 bar: 950 l/min Outlet connection (G): 1/2" Dimensions: 900 × 600 × 840 mm Weight: 120 kg Kjdpfx Aeycc Egoaxewt

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. Kedpeycctqofx Aaxswt The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: excellent (used), Year of construction: 2011, volume flow: 3.24 m³/h, operating pressure: 10 bar, pressure: 10 bar, Equipment: refrigerant dryer, MARK MSB 22 IVR Screw Compressor Variable speed (inverter driven) 22 kW motor Capacity 3.24 m3/min Pressure 10 bar Operating hours 827 h Net price 15,000,- Gross price 18,450,- Compressor fully functional Kwsdpfx Aoyb Td Deaxet

Condition: excellent (used), Year of construction: 2016, volume flow: 2.16 m³/h, pressure (min.): 8 bar, ALUP ALLEGRO 14 screw compressor Variable speed (inverter) 15 kW motor Output 2.16 m3/min Kwjdpsyb Svfefx Aaxst Pressure 13 bar Year of manufacture 2016 Net price 12,500,- Gross price 15,375,-

Condition: new, Year of construction: 2026, The LUFT 1500 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK combine state-of-the-art pneumatic solutions with the use of high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical parameters Motor power: 11 kW / 15 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 1650 L/min Air delivery at 6 bar: 1580 L/min Ksdpfeyb Dmisx Aaxowt Air delivery at 8 bar: 1320 L/min Air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 × 740 × 1050 mm Weight: 380 kg

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2 m³/h, operating pressure: 13 bar, input voltage: 400 V, KTC KME 15 kW Screw Compressor Mounted on a 500 l pressure vessel Kwsdpfx Aajyb Dbmexst Equipped with a refrigerated dryer. 15 kW motor Capacity: 2.00 m3/min Pressure: 10 bar Year of manufacture: 2013 Operating hours: 5946 MTG

Condition: new, Year of construction: 2026, The LUFT 1000 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK represent the most advanced solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Technical parameters Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Kwjdjybz Spopfx Aaxjt Outlet connection diameter (G): 1/2" Dimensions: 1470 × 620 × 900 mm Weight: 130 kg

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Kwodpfx Asybvkasaxjt Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: excellent (used), Year of construction: 2007, volume flow: 1.2 m³/h, KAESER SM 15 T screw compressor With refrigeration dryer Motor: 9 kW Capacity: 1.20 m3/min Pressure: 10 bar Operating hours: 13,082 h THE COMPRESSOR IS FULLY OPERATIONAL. Kwedpfxjybrbzs Aaxet

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Good condition Kwodpfjybbczjx Aaxst Price ex location Transport available at extra cost!

Condition: used, Year of construction: 2014, operating hours: 30,000 h, Atlas Copco GA15+ Screw Compressor For sale is a screw compressor manufactured by Atlas Copco, model GA15+. This compressor is ideally suited for industrial and workshop applications and is renowned for its reliability and durability. Technical specifications: Manufacturer: Atlas Copco Kodpfoybbchox Aaxewt Model: GA15+ Type: Screw compressor Year of manufacture: 2014 Operating hours: approx. 30,000 hours (estimate, as the compressor has not been connected to the power supply for about 6 months) Note: All information is provided to the best of our knowledge but without guarantee. If you are interested or have any further questions, please feel free to contact me.

Condition: excellent (used), Year of construction: 2017, operating hours: 12,418 h, functionality: fully functional, Premium screw compressor Atlas Copco GA18VSD+FF, 18.5 kW with 13 bar and 3.75 m3/min. Integrated dryer and frequency converter. Kwjdpjyba U Aofx Aaxot

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, We offer the following: 1 used screw compressor Manufacturer: Renner Model: 1-11 Year of manufacture: 2011 The machine is connected to the power supply and can, of course, be inspected and tested. Kwedpfx Ajya Hkhsaxot The stated price is net, plus statutory VAT. Upon purchase, you will receive an invoice with VAT shown separately. The sale is made without any warranty and is intended exclusively for business customers.

Condition: good (used), Year of construction: 2011, MANUFACTURER: COMPAIR MODEL: L22RS SERIAL NUMBER: CD10007456001 Kjdpfx Aaoya Hacoxswt YEAR: 2011 POWER (kW): 22 OUTPUT (m3/min): 3.15 PRESSURE (bar): 10

Condition: excellent (used), Year of construction: 2010, operating hours: 17,343 h, MANUFACTURER: EKOMAK MODEL: EKO750 SERIAL NO.: 75673 Kwedpfx Aeya D Abeaxot YEAR: 2010 POWER (kW): 75 CAPACITY (m3/min): 13.2 PRESSURE (bar): 8

Condition: excellent (used), MANUFACTURER: ATLASCOPCO MODEL: GA26 P S/N: API320780 Kjdeya Dudjpfx Aaxewt YEAR: 2012 POWER (kW): 26 CAPACITY (m3/min): 4.16 PRESSURE (bar): 10