Ursula Ruminsky Handel

Condition: good (used), Year of construction: 2007, machine/vehicle number: 139737, Offer 25389 Csdoxu Ezgepfx Ac Hjri Technical Data: - With asymmetrical roller arrangement, lower roller with inclined positioning - Drop-end bearing for sheet removal - Max. working width: 1050 mm - Max. sheet thickness approx.: 5.0 mm - Roller diameter: 130 mm - Min. bending diameter: 190 mm - Working speed right & left: 6 m/min - Manual adjustment of the rear roller - Wire insertion groove in the lower roller - Foot pedal right-left operation with emergency stop button - Drive: 400 V / 2.2 kW - Space requirement approx.: W 2100 x H 1200 x D 900 mm - Weight approx.: 1.3 t

Condition: used, functionality: fully functional, Type: 3-roll plate rolling machine Maximum rolling length: 1500 mm Cjdpfx Asxrv S Doc Heri Estimated rolling thickness (S235) over the entire length: 5 mm Exact value not known as the nameplate is missing Top roll diameter: 125 mm Lower roll diameter: 110 mm Lower rolls: driven Drive: electric Side: Foldable side for removal of closed cylinders. Machine dimensions: length 2200 mm x width 850 mm x height 1250 mm Weight approx. 1100 kg Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract and we advise you to check all relevant details. Financial Information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses).

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Crsdoxrc Dtopfx Ac Hei Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: used, functionality: fully functional, Year of construction: 1990, number of rollers: 3, roller (bottom) diameter: 100 mm, roller (top) diameter: 100 mm, side roll diameter: 100 mm, working width: 1,540 mm, sheet thickness steel (max.): 3 mm, overall weight: 785 kg, power: 1.1 kW (1.50 HP), Capacity: 1540 x 3,0 mm. Capacity with prebending: 1540 x 2,0 mm. Upper roll: Ø100 mm. Lower roll: Ø100 mm. Motor: 1,1 kW. Year: 1990 Country of origin: Sweden. Size (L x W x H): 2350 x 700 x 1050 mm. Weight: 785 kg. Asymmetric. With motorized bending roll with clock in hand wheel. Cjdpjxphp Njfx Ac Heri All our used machines are tested and serviced before delivery.

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Crsdpexn Tgwsfx Ac Hji Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm - Conical rolling Cedpfexn Rrqsx Ac Heri - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm max sheet thickness 3.0 mm Crodpfoxnc N Uox Ac Hei roller diameter 110 mm motor driven

Condition: good (used), functionality: fully functional, total length: 2,500 mm, Three-roll plate bending machine Motor-driven Max. sheet width: 2500 mm Cedpfx Acexln Ahs Hsri Max. sheet thickness: 4 mm Length of bending rolls: 2550 mm Upper roll diameter: 134 mm Lower roll diameter (each): 125 mm Sturdy design, good condition Ready for immediate use

Condition: new, Year of construction: 2023, roller (top) diameter: 95 mm, – Capacity 1270 x 3 mm – Electrically adjustable rear roller – Digital display – Hardened rollers – Conical bending – Swiveling upper roller – Brake motor – Foot pedal control – Emergency stop Crsdpsxiyw Ejfx Ac Hji – Documentation – 400 V

Condition: new, Year of construction: 2025, – 4 rollers – Capacity: 1270 x 4.5 mm – Pre-bending capacity: 1270 x 3.5 mm – Hardened rollers – Top roller diameter: 130 mm Credpoxdvafjfx Ac Hsi – Bottom roller diameter: 110 mm – Side roller diameter: 110 mm – Digital display for left roller movement – Digital display for central bottom roller movement – Digital display for right roller movement – Steel construction ST-52 – Documentation – 400V

Condition: new, Year of construction: 2025, Brand new asymmetric sheet metal plate rolling machine Maximum bending length: 1,550 mm Top and bottom roller diameter: Ø 128 mm Bending roller diameter: Ø 135 mm Rated bending capacity over the entire bending length: 3 mm steel sheet at 240N/mm² - with an internal diameter of Ø 384 mm Dimensions approx. 2.9 x 1 m x H 1.1 m Drive power: 4.5 kW Weight approx. 1,450 kg. Equipment: - Roller extensions for mounting profile bending rolls - Motorized adjustment of the clamping and bending rollers - Infinitely variable roller rotation speed from 0 to 6 m/min - Hardened rollers 55 to 60 HRC Optional accessories: - Digital position indicators - Cone bending device Codpfxsxdiqqe Ac Hori - Ground rollers - Mobile central control panel

Condition: used, functionality: limited functionality, Year of construction: 2011, Manufacturer: OK MACHINE Maximum sheet length: 1500 mm Maximum sheet thickness: 3 mm Number of rollers: 3 Roller diameter: 150 mm Crodpfx Acsxctvbe Hji

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Credpjxacfgjfx Ac Hei * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) Cedpfxexacdpj Ac Heri - 1x freely movable control panel - operating instructions (ENG)

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 5.0 mm ST pre-bending capacity 4.0 mm ST upper roll diameter 150 mm lower roll diameter 150 mm side roll diameter 150 mm work height max. ca. 750 mm max. 12.0 mm Control konv. 0 400 V total power requirement 3.0 KW weight 2250 kg range L-W-H 3250 x 1000 x 1300 mm - in checked condition - machine video - ?v=wCioqStEx8U Equipment: - electro-motorized 3-roller round bending machine - all 3x rollers motor-driven * Rollers in mint condition (!!) * Machine has bent almost only copper Cedpoxab Ndofx Ac Hsri - electro-motor side roller adjustment * including digital position display - manual bottom roller adjustment - with conical bending device * Inclination of the side roller * Workpiece limitation for cone with 45° incline: * Working length max: 60% * Bending performance max: 50% - hardened rollers SAE 1050 CK 45 - manual folding bearing for removing closed pipes - Safety device - 1x freely movable foot control (4x foot switch) - Connection cable + connection plug

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm Codpfxsxabkbe Ac Hsri diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: new, sheet width 2050 mm plate thickness 4,5 mm max. plate thickness 4,0 mm anbiegen roll length 2050 mm Credpfxexaawgj Ac Hsi min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement Codexaacvspfx Ac Heri - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm Crjdpfoxaaa Uex Ac Hji roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm bending speed 5.3 m/min engine output 2.2 kW weight 1360 kg range L-W-H 2320 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: new, sheet width 1050 mm plate thickness 3.3 mm Cjdpfx Asw U U Udjc Hjri pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: used, Electric roll Bending Machine 3 rolls Maxi Length: 1000 mm Maxs Thickness: 3 mm Crjdpow Ti Uvsfx Ac Hei Rolls diameter: Ø 80 mm Dimensions (L x W x H): 2000 x 1000 x 1000 mm Weight: approx 1 T

Condition: used, Electric roll Bending Machine 3 rolls Maxi Length: 800 mm Maxs Thickness: 3 mm Rolls diameter: Ø 100 mm Dimensions (L x W x H): 2000 x 1000 x 1000 mm Weight: approx 1 T Crjdpfx Acjw Ti Sho Hji

Condition: used, Year of construction: 2020, Manufacturer: Lechner Maschinenbau e.K. Type: 3100/110 Year of manufacture: 2020 Power supply: 3 phases, neutral, PE Voltage: 400 V Power consumption: 1.5 kW Upper roll diameter: 60 – 100 mm Maximum usable length: 1100 mm Rated capacity: 3.2 mm (sheet thickness) Credpfow Nhzyex Ac Hoi Feed rate: 5 m/min Please submit inquiries only via email. All information provided to the best of our knowledge. Subject to error. This offer is directed exclusively to entrepreneurs as defined by § 14 BGB. The sale is made under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breaches of duty by the seller, or for any injury to life, body, or health. For further information, please visit the website of Witzenmann GmbH under the keywords 'Legal Notice', 'Terms and Conditions', and 'Data Protection'.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm Cjdpfx Acjw Hpzwo Hjri minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - Serial number: 1011268 - Max. sheet thickness: 6mm - Top roll diameter: 220mm - Max. working width: 3040mm Csdpew Elvhefx Ac Heri - Drive: raulisch - Number of rolls: 4 - Bottom roll diameter: 220mm - Motor power: 5.5kW - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum