Arutech Metaalbewerking

Condition: excellent (used), Year of construction: 2014, turning length: 1,693 mm, turning diameter over cross slide: 1,030 mm, turning diameter: 690 mm, Multicut 500iT 5-axis turning center in very good condition. (X, Z1, Z2, C, B, Y axes). The machine was installed in September 2014 and has undergone regular maintenance. It is a very powerful and highly precise machine. Spindle on: approx. 13,700 hours, spindle hours: 4,500 Main technical data: CNC Siemens 840D Swinging diameter over bed: 1,030 mm Maximum turning diameter: 690 mm Turning length: 1,693 mm Y-axis: 370 mm Spindle bore: 106 mm Bar passage through draw tube: 94 mm Spindle speed: 3,500 rpm Spindle motor S1/S6 40% duty cycle: 59/74 kW Milling spindle: 12,000 rpm Milling spindle power S6 40% duty cycle: 22 kW Milling spindle tool holder: CAPTO C6 B-axis: -120º, +105º ATC magazine with 81 positions Linear scales in X, Z, Y Tailstock MK6, stroke 180 mm Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m Machine weight: 22,800 kg Ijdpezfhbwsfx Adrsic Accessories: Forkart chuck type 3FNC with reversible hard jaws • Chip conveyor • Internal cooling through tool, 60 bar • Coolant gun • Automatic tool measurement • Automatic door opening • Servo-controlled hydraulic steady rest type SMW SR 5.1 (85 to 350 mm Ø), automatic up/down movement

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turning and milling center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter, main spindle: 66 mm Bar diameter, counter spindle: 43 mm X-axis: 260 mm Y-axis: +/- 50 mm Iedpfxozfguvs Adreic Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Accessories: - Tool measurement system - Chip conveyor - Bar feeder LNS - Workpiece collection tray

Condition: excellent (used), Year of construction: 2024, turning length: 830 mm, turning diameter over cross slide: 720 mm, spindle motor power: 35,000 W, spindle bore: 115 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, rotational speed (max.): 2,800 rpm, CNC Lathe with c-axis DOOSAN - PUMA GT3100M MACH-ID 9658 Make: DOOSAN Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Part catcher Cromar chip conveyor Tool eye probe CROMAR Chip conveyor Samchully Chuck 380 mm 5 BMT Tool holders Max. turning Ø: 720mm X-Axis: 260mm Z-Axis: 830mm Spindle bore: 115mm Speedrange: 2800Rpm Spindle power: 35kW ATC / revolver: 12 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Iodpfxezfgrzs Adrsic Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, EMCO MAXXTURN 65 – Technical Specifications • CNC control: Siemens SINUMERIK 840D sl • Programming system: ShopTurn • Bar capacity: 65 mm • Spindle bore: 73 mm • Main spindle: 29 kW, 250 Nm, 5,000 rpm • Counter spindle: 5,000 rpm • C-axis: Main and counter spindle • Tool turret: 12-position servo turret • Tool holder: VDI 30 • Driven tools: 12 stations • Spindle speed for driven tools: up to 6,000 rpm Iedpfxezff R As Adreic • Y-axis: ±50 mm • Max. turning diameter: 500 mm • Rapid traverse X/Z: 30 m/min • Hainbuch chuck system 65 mm • Operating hours: 25,412 hrs • Year of manufacture: 2005

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 Iiedozfau Aspfx Adrjc - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000 Ijdpfozfauijx Adrjic

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 used CNC turning machine DMG Gildemeister NEF 600 - Year of manufacture: 2010 Operating hours: approx. 40,600 h - Spindle hours: approx. 17,900 h Iiedpszfafzjfx Adrsc Refurbished by DMG Mori in 2025: Electronic control unit Control system: Siemens Sinumerik 840D (ERGOline) Max. turning diameter: 600 mm Swinging diameter over slide: 490 mm Turning length: 1,190 mm | Distance between centers: 1,335 mm Bar capacity: 75 mm | Spindle bore: 90 mm Travel X / Z: 398 / 1,250 mm Spindle nose A8 DIN 55026 | Chuck 250 / 315 mm Max. speed: 3,000 rpm Power (100 % / 40 % duty cycle): 27.5 / 39.4 kW Torque S1 / S6: 600 / 845 Nm Tool turret, 12 stations, VDI mounting (static and driven) Tailstock, hydraulic, travel 1,150 mm, max. 1,250 daN, MK 5 Connection: 400 V / 50 Hz / 42 kVA Includes: Chip conveyor Hydraulic 3-jaw power chuck SCHUNK Extensive tool package: numerous VDI holders, static and driven (including boring bar holders, drilling and collet chuck holders), mostly brand Holex, without cabinet Technical documentation (German) Footprint: L x W x H: 3,697 x 2,687 x 1,936 mm | Total weight approx. 7,000 kg Technical data subject to change, prior sale reserved. Used machines and accessories are always sold without warranty!

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min Iijdpfx Ajzd Un Ijdrec total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface High precision Turning and Milling Centre with Y-axis and robot loading. Stäubli Robot for shaft loading. *

Condition: like new (used), DMG Mori NZX CNC – Turning and milling machine Tool setter: Renishaw RP3 Left and right measuring arm Iodpfxozd Ugks Adroic in original wooden box

Condition: used, Year of construction: 2008, Technical details: turning diameter: 190 mm turning length: 503 mm control: Fanuc 31i - TA Travel x/z turret 1: 135 / 503 mm Travel x/z turret 2: 135 /503 mm c-axis: Sp. 1 / 2 Spindle 1 RPM: 6000 1/min Spindle 1 Power: 11/7,5 kW Spindle 1 max. bar diameter: 42 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11/7,5 kW Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 6000 1/min Turret 1 power rotary tools: 7,1 / 2,2 kW Turret No.2 stations / rotary tools: 12/12 Turret 2 tool RPM: 6000 1/min Turret 2 power rotary tools: 7,1 / 2,2 kW total power requirement: 53 kVA weight of the machine ca.: 5700 t Iedpfx Adozd T I Horsic dimensions of the machine ca.: 2,3 x 1,6 x 1,94 m Accerories Chip conveyor right discharge Robot interface High precision cnc turning center, rotary tools and y-axis on upper turret, Robot loader for shafts. *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Iodpfx Aszd Tcwjdreic Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor CNC turning center with 3 turrets and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm Iedpszd Su Eofx Adrsic max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Flood Coolant Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Iisdpfszd R S Aex Adroc Repeatability: ±0.003 mm ELECTRICAL: Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. Iiodpfxozd Nv Hs Adrjc * 5-axis machine. * 1.5-meter Lns Quick Load bar feeder. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. Iasdbq Hnuozcdf Uepeu * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * 2 C-axes. * Bar capacity: 65 mm. * Y-axis on upper turret. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. Isdpfx Adjzd H I Teroic * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight: 6.5 metric tons. * Machine available for inspection while in operation. * Immediate delivery, unless sold prior to listing.

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Iodpfezd Dw Esx Adreic Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, CNC turning machine GILDEMEISTER CLX 350 V3 Iiedozd Dlpepfx Adrec With DMG MORI SLIMline Multi Touch Fanuc I series control Year of manufacture: 2018 Turning diameter: 320 mm Travel in X: 242 mm Travel in Z: 540 mm Spindle bore: 65 mm Speed range: 20 – 5000 rpm With the following accessories: Sliding safety shield with interior lighting 12-station turret with 12 driven tool stations VDI 30 C-axis, tailstock with quill Programmable tailstock via M function Tool measurement in the work area Electronic handwheel Chip conveyor 3-jaw chuck, hydraulic, Schunk ROTA THW plus 0 210 mm Foot switch for chuck adjustment Parts catcher Glass scale in the X axis Coolant system with high-pressure pump 12 bar Coolant spray gun Operating manuals

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor Isdpjzd Dizofx Adrjic • High productivity through simultaneous use of the upper and lower turrets • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, CNC turning machine GILDEMEISTER CTX 510 ECOLINE With Siemens control Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm With the following accessories: Sliding guard Iijdpfx Ajzd Dczodrjc 12-station turret with 6 driven tool stations Tool measurement in the working area 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Various tool holders VDI 40 Signal light, 4-color Tailstock with quill Chip conveyor with coolant tank 4 machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 2,289 mm, total width: 2,377 mm, overall weight: 11,000 kg, product length (max.): 2,860 mm, number of axes: 10, This 10-axis CMZ TTL66 turn-mill centre was manufactured in 2025. It features a maximum swing diameter of 800 mm and a maximum turning diameter of 515 mm. The machine is equipped with twin spindles and twin Y-axis turrets, allowing for simultaneous 4-tool machining capability. If you are looking to get high-quality turning and milling capabilities, consider the CMZ TTL66 machine we have for sale. Contact us for further details regarding this machine. • General • Maximum swing diameter: 800 mm • Maximum turning diameter: 515 mm • Distance between spindle noses: 614 mm • Installed power: 35.5 kVA • Tank capacities: Coolant 510 L, Lubrication oil 18 L, Hydraulic oil 100 L • Axis travels • Upper turret (T1): X1 240 mm, Z1 800 mm, Y1 ±45 mm • Lower turret (T2): X2 240 mm, Z2 800 mm, Y2 ±45 mm • Sub-spindle axes: X3 mm, Z3 580 mm • Rapid traverse rates • X axes: 30 m/min • Z axes: 30 m/min • Y axes: 20 m/min • Axis acceleration • All linear axes: 1G (9.8 m/s²) • Main spindle • Type: Integrated built-in motor • Chuck size: 210 mm • Spindle nose: ASA A2-6 • Bar capacity: 66 mm • Spindle bore: 72.5 mm • Draw tube I.D.: 66 mm • Bearing O.D.: 170 mm • Power (Max / S3 25% / S1): 35.5 / 28.3 / 23.5 kW • Torque (Max / S3 25% / S1): 205 / 180 / 150 Nm • Sub-spindle • Max speed: 4,000 rpm • Bar capacity: 66 mm • Spindle bore: 72.5 mm • Draw tube I.D.: 66 mm • Bearing O.D.: 170 mm • X3 travel: ±120 mm • Z3 travel: 580 mm • Power (Max / S3 25% / S1): 35.5 / 28.3 / 23.5 kW • Torque (Max / S3 25% / S1): 205 / 180 / 150 Nm • Turrets (upper & lower) • Number of stations: 24 • Live tool positions: 12 • Tool size: 20×20 mm / 25×25 mm • Indexing time: 0.1 sec • Clamping force: 3,200 kgf • Curvic coupling diameter: 150 mm • Live tooling • Motor type: Built-in synchronous motor • Max speed: 12,000 rpm • Power (Max / S1): 14 / 10 kW • Max torque (Max / S1): 42 / 32 Nm • Cooling: Full oil cooling • Standard tool interface: NT-55 • Construction • Heavy-duty GG-25 cast iron 60° slant bed, FEA-optimized • Bed weight: 4,450 kg • NSK roller linear guideways and pre-tensioned ballscrews • 8 built-in oil-cooled motors • Thermal-stable design with spindles at 90° to X–Z plane Iiodpfx Adozd Aarorec • Coolant & thermal management • Oil chiller capacity: 5,000 W • Standard coolant pump: 6 bar / 60 l/min • Coolant tank capacity: 510 L • Oil cooling for both spindles, all X/Y built-in motors, and both live-tool motors • Thermal compensation via controlled oil temperature • CNC control • Fanuc 31i-T Plus with iHMI, 15" touchscreen • Manual Guide i conversational programming • Ethernet & USB connectivity • Remote assistance capability • Industry 4.0 ready • 14 controlled axes: X1, X2, X3; Y1, Y2; Z1, Z2, Z3; T1, T2; M1, M2; C1, C2 • Simultaneous control of 4 axes per channel • Functions: Rigid tapping, polygon turning, cylindrical interpolation, polar coordinate interpolation, gear hobbing and power skiving capability • Key selling points • Twin spindle + twin Y-axis turrets • Simultaneous 4-tool machining capability • Full built-in motor architecture (no belts) • 66 mm bar capacity on both spindles • 12,000 rpm live tooling • Superimposed machining with movable sub-spindle • Suitable for high-volume automotive, hydraulic, aerospace, and precision turned parts production Additional equipment • Optional high-pressure coolant pump: 15 bar • Optional tailstock • Not specified in the provided information: robots, automation, chip conveyor, bar feeder Technical Specification

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1114S49, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 26 mm, total height: 1,700 mm, total length: 7,000 mm, total width: 2,000 mm, overall weight: 3,000 kg, feed force Z-axis: 310 N, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MANURHIN KMX 3260 CNC turning center - Stroke of the moving spindle carriage: 160 mm - Type of cross slide: two turret heads, 6 positions - Number of tool stations: 12 - For external machining: 1 - 12, for internal machining: 1 - 11 - With workpiece ejector - Stroke of the cross slide: 35 mm - Max. cross-section for external tools: 16 x 16 mm Ijdpfx Aezdzfaedreic - Diameter of the internal tool holder: 25.4 mm - Ball screw diameter: 25 mm - Pitch: 5 mm - With C-axis - Driven tools - Incl. bar feeder FMB, type: TURBO 3-36 Note: The item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen - loaded onto a truck.

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Iijdpozdtkhefx Adroc

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Iedpfszdthmjx Adroic Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Iedpfx Aezdrzxsdrsic Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: used, Year of construction: 2000, Gildemeister CNC universal lathe Type/Model: CTX 600 E Condition: Used Operating hours: 99,831 h Year of manufacture: 2000 Technical data Swinging diameter: 680 mm Distance between centers: 2000 mm Spindle speed: 2800 rpm Chuck: Ø 315 mm Tool turret: 12 stations; incl. 3 stations for driven tools Tool holder: VDI 50 Tailstock: NC-controlled Dimensions approx. 5560 x 240 x 213 mm Weight approx. 10,000 kg Isdpfx Aezdrrkedroic Equipment: - Power chuck, type SMW Autoblok 315 BH-FX, Ø 315 mm - Control system: Heidenhain CNC Pilot