WALLIMA AG Werkzeugmaschinen

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cjdpfjxugnuex Abcohd Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: ready for operation (used), Year of construction: 1990, bore capacity in steel (diameter) 28 mm x-travel 350 mm y-travel 160 mm spindle taper MK 3 quill stroke 100 mm table surface area 600 x 240 mm Chedext Utcjpfx Abcsd column diameter 110 mm throat 260 mm spindle / table 430 mm spindle turning speed - stepless 160-2800 U/min Total height 1200 mm engine output 0,7/1,3 kW weight of the machine ca. 340 kg dimensions of the machine ca. 0,9 x 0,5 x 1,8 m Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1983, functionality: fully functional, ACIERA - 22 S 2-1 E Listing Details Stock number: 1039-9393 Machine type: Column drilling machine Manufacturer: ACIERA Model: 22 S 2-1 E Year of manufacture: 1983 Control system: — Location: D-59302 Oelde Country of origin: Switzerland Delivery time: by arrangement Freight terms: ex location Additional information: Column Drilling Machine ACIERA - 22 S 2-1 E - Only 523 operating hours WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Cedpfx Aboxt N Tqecshd Technical Details Speed range: 40 - 3,600 rpm Drilling stroke: 105 mm Spindle taper: MK Arm reach: 250 mm Gear stages: 2x Table clamping surface: 660 x 320 mm T-slots: 3x T-slot pitch: 100 mm T-slot width: 18 mm Total power requirement: 2 kVA Machine weight approx.: 720 kg Required space approx.: 1.2 x 1.0 x 1.8 m

Condition: good (used), – MK3 – 100/3200 rpm – Digital display – Height-adjustable drill head – Tilting drill head – Table 580 × 240 mm – Gear drive – Safety guard – Emergency stop switch Chjdpfx Aoxtq R Rsbcjd – Lighting – Machine vice – 380 V

Condition: good (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 420 mm, feed length Y-axis: 240 mm, feed length Z-axis: 120 mm, Toolroom milling machine. Fully functional with Heidenhain 310 control system. X-axis (longitudinal) 420 mm Y-axis (cross) 240 mm Z-axis (vertical) 120 mm. Table length 730 mm Table width 280 mm Chjdsxtqvaopfx Abcsd Max. table load 75 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152726, Offer 25333 Technical Specifications: - Drilling capacity: 28 mm - Drill spindle mount with drawbar thread: MT 3 - Drawbar thread: M12 - Drill spindle speeds in 2 stepless stages: 120 – 2160 rpm - Drilling unit motorized height adjustment Chsdpfx Asxqyi Robcjd - Minimum / maximum distance table / drill-mill spindle: 60 / 420 mm - Drill spindle travel with fine adjustment by handwheel: 100 mm - Drill spindle overhang: 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel (X-axis / Y-axis): 350 / 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Space requirement (approx.): W 800 x H 1800 x D 900 mm - Weight (approx.): 550 kg - Including: automatic drilling feeds, motorized height adjustment of the drilling-milling unit, various accessories in a separate workbench, machine vice, tool holders for milling cutters and clamping tools, workbench

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified timeframe between 01/12/2025 and 05/12/2025! Chedpfxjxm S R Ej Abcjd TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max.): 9,200 rpm Spindle speed (min.): 50 rpm Tool holder diameter: 30 mm Number of magazine tool slots: 32 Max. tool length: 260 mm Max. tool diameter without empty adjacent slots: 63 mm Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg CNC control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Horizontal reach: 370 mm EQUIPMENT Documentation/manual Infinitely variable spindle speed FEHLMANN dividing unit (4th axis) 126 SK 30 tool holders Supplementary documentation

Condition: good (used), Year of construction: 1966, Collet boring mill BFFB 85 with lots of accessories Cedpfxoxmkg Eo Abcshd

Condition: ready for operation (used), Universal Milling Head SECMU Cjdpexhrffofx Abcehd Maximum speed 2000rpm ISO 50 Never Used

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 28 mm bore capacity in steel perm. 24 mm spindle taper ISO 40 DIN 2080 Shank diameter 32 mm quill stroke 115 mm x-travel 500 mm y-travel 250 mm z-travel 541 mm turning speed range - spindle 115 - 3.100 U/min transmission ratio 3 transmission ratio 1 115 - 600 U/min transmission ratio 2 270 - 1.400 U/min transmission ratio 3 590 - 3.100 U/min motor 2,2 kW table surface area 850 x 240 mm T-slot - width 18 mm T-slot - distance 80 mm weight of the machine ca. 480 kg dimensions of the machine ca. 1,4 x 1,1 x 2,5 m Drilling and Milling M/C Chodpjxgu Imjfx Abcod OPTIMUM - OPTImill BF 46 Vario - incl. OPTIMUM base cabinet

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Model : UB2 Spindle taper : MT3 Cedpsxgcy Rsfx Abcjhd Vertical Travel : 590mm Spindle speed : 25-2560 rpm Table size : 700X880mm

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Model: M12H Dimensions: Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 Cjdpfx Abexdfauocohd M12 Torsion u-9

Condition: ready for operation (used), CNC Bed Type Milling Machine Make SECMU model C6 Table Size 2200 x 700 Cjdpfx Aexdduwjbcjhd X travel 2000 Y travel 1200 Z travel 1000 ATC 60nos. complete with universal milling head

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, Sale of SACEM drilling and milling machine for machining large parts. The machine is fully operational and currently used in ongoing production—primarily for reworking tasks. It is particularly suitable for processing large, unwieldy workpieces. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle stroke: 800 mm Travel distances: Cedpsxbn A Tjfx Abcehd x: 900 mm y: 900 mm z: 1200 mm Clamping surface: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Sales / takeover conditions: • Dismantling, removal, and transport are at the buyer’s expense and risk. • The buyer is responsible for providing personnel, tools, and transport equipment. All personnel must use appropriate personal protective equipment and be properly trained for the tasks performed.

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK table-size 490 x 120 mm diameter of hob 30,0 mm Chjdpoxabb Hefx Abcsd motor 230 Volt total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm Chjdsw Upfdopfx Abcsd W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Chodpfxjw Sx Age Abcsd

Condition: good (used), Year of construction: 1985, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm Chedpsw Hxw Iefx Abcjd

Condition: not inspected (used), functionality: unexamined, total length: 5,000 mm, stroke length: 100 mm, rotational speed (max.): 2,000 rpm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Performance data Speed range: 355 - 2,000 rpm Processing stroke: 100 mm Max. stop: 3,000 mm Roller conveyor length left: 1,580 mm Roller conveyor length right: 2,200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,000 x 6,100 x 1,900 Weight: 150 kg EQUIPMENT Chsdpfx Absw Htcfscsd Roller conveyors left & right

Condition: excellent (used), - Mitutoyo digital readout. - Accessories available. Travel distances: X-axis travel: 280 mm Y-axis travel: 210 mm Chjdpfx Aew Hqh Esbced Cross table: KS 255 Spindle speeds: 135 – 4,500 rpm

Condition: excellent (used), - Heidenhain digital display. - Accessories available. Travel paths: X – travel 280 mm Y – travel 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm Codpfxew Hqf Re Abcohd

Condition: excellent (used), Heidenhain digital readout. Fehlmann cross table: KS 255. Accessories: available. Working range: Quill stroke Z-axis 110 mm Machine head travel 450 mm Table spindle nose 0 - 527 mm Quick-change systems SF 32 Work spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 255 x 550 mm Dimensions and weight: Space requirement W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg Chodpfsw Hqdmex Abcsd

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, We offer the CC 200, a high-performance CNC machine for the automatic cleaning of corners on PVC profiles – ideal for those seeking precision, speed, and versatility in window and door manufacturing. The machine is brand new and ready for use, designed to ensure fast processing and high-quality results thanks to its CNC system and fully automated operation. Codpfx Aew Av Ntobcjhd ✅ Main features: ✔ High-speed CNC system with 2 servo-controlled axes ✔ 7-position tool magazine for rapid tool changes ✔ Easy programming with Auto Learning system ✔ Ability to define and store multiple profiles and operations ✔ Suitable for standard profiles up to 200 mm ✔ Compact design fully compliant with CE regulations 📌 Technical specifications: Power: 7 kW – 380 V / 50 Hz Max stroke: 2100 mm Operating pressure: 6 Bar Weight: 1,026 kg Dimensions: 2250 × 2050 × 2050 mm

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Codpowzyp Ujfx Abcohd Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: good (used), Year of construction: 2007, control 840 D x-axis 4000 mm y-axis 3000 mm z-axis 2200 mm Technical data: The travel in the x-direction is 4000 mm, in the y-direction 3000 mm and in the z-direction 2000 mm. The quill stroke is 800 mm. The distance from the spindle center to the clamping surface is a minimum of 80 mm and a maximum of 3080 mm. The maximum workpiece weight is 20000 kg. The worktable is rectangular (HEHM) with a clamping surface 2500 mm long and 2000 mm wide. There are 12 T-slots according to DIN with a slot width of 28 mm and a slot spacing of 160 mm. The table height above floor level is 800 mm. The table can be swiveled through 360°. Chsdewzyphopfx Abced The work spindle has an ISO 50 tool holder in accordance with DIN 69871-A40. The spindle diameter is 160 mm. The maximum torque absorption is 2346 Nm. The spindle cannot be swiveled.