Hörmann-Verwertungen GmbH & Co. KG

Condition: ready for operation (used), load capacity: 600 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPESM-600 - Induction oven Max temperature: 850° Dwodpox Enffsfx Adusf Voltage: 400 V

Condition: ready for operation (used), load capacity: 600 kg, Hindenlang TPESM-600 - Induction oven Max temperature: 850° Voltage: 400 V Djdpfjx Enflox Aduswf

Condition: ready for operation (used), empty load weight: 11,000 kg, WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Dwodpfx Adox Engieuof Spindle bore: ISO 50 Table dimensions: 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW

Condition: ready for operation (used), Andouart extruder Dwjdsx Engpjpfx Aduef

Condition: ready for operation (used), Automatic TECHNIPIPES Weigh bagging machine: Capacity: min: 5 kg / max: 25 kg Screw between Mixer and Bagging machine, controller in between. Supply bagging machine: 400V 50 Hz Dwodjx Enhtopfx Adujf Supply controller: 220 V 50 Hz ATEX-certificated! Bagging phase : 2 steps (Raw + finishing) Vibration device to compact the product in the bag Part in contact with the product : stainless steel Aisi 304 Type of bags : valve bag Bag materials: paper / plastic Screw (auger) packer Single screw feeding unit for powder, flour, granules Power: 5 kW weegsysteem / balance / weighing system / afzak systeem pipelines

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: BES041875, Thanks to its high impact frequency and reduced impact energy, it is primarily/ideally suited for use in track tamping or maintenance work. For driving rail spikes in wooden sleepers, driving pipes, posts, probes, and breaking concrete. Easy transport, short setup time, low emissions, low noise levels. HAPS (Hand and Arm Protection System). Djdpfx Aex Eb Udjdujwf

Year of construction: 1975, condition: ready for operation (used), General Data Machine weight 20000 kg Main Drive Number of axis 3 Spindle motor power 11 kW Tool taper ISO 50 Movement X-Axis Movement 8000 mm Dedpox D Dq Eofx Aduewf Z-Axis Movement 1150 mm Y-Axis Movement 950 mm This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling

Year of construction: 2014, condition: ready for operation (used), Main Drive Bending length 2540 mm Dwedpfx Ajx D Duwjdusf Number of axis 5 This 5-axis SCHRODER-FASTI PowerBend Professional 2500/4,0 UD was manufactured in 2014. It features a bending length of 2540 mm, usable open height of 350 mm, and R axis travel of 80 mm. Consider the opportunity to buy this SCHRODER-FASTI PowerBend Professional 2500/4,0 UD Folding Machine. Contact us for more information. Application Types Other Sheet Metal Machinery

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 20000 kg Control Unit Brand HEIDENHAIN Dsdpfx Adsx D D Iwouswf Model 426 Main Drive Number of axis 4 Spindle Speed 3000 RPM Tool taper ISO 50 Movement X-Axis Movement 3000 mm Z-Axis Movement 1500 mm Y-Axis Movement 1200 mm This 4-axis MTE BF 3200 Bed Type Milling Machine was manufactured in 2001. It features a travel range of 3000/1200/1500 mm, CNC Heidenhain 426, a manual head with 3000 rpm, ISO 50, a chip conveyor, rotary table, and an ATC 40. Consider the opportunity to buy this MTE BF 3200 Bed Type Milling Machine. Contact us for more information. Application Types Milling

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 9500 kg Measurements height 2760 mm Dimensions Machine Length 6600 mm Table Table load 4000 kg Main Drive Number of axis 3 Dwsdpfox D D Nzox Adusf Spindle Speed 4000 RPM Spindle motor power 29 kW Tool taper ISO 50 Movement X-Axis Movement 2500 mm Z-Axis Movement 800 mm Y-Axis Movement 800 mm This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine. Application Types Milling

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 355 NC Main Drive Spindle speed range 10 to 1600 Spindle bore 150 mm Number of axis 4 Movement X-Axis Movement 3000mm Y-Axis Movement 2000mm Y-Axis Rapid Traverse 7100 mm/min Z-Axis Movement 1600mm Z-Axis Rapid Traverse 7100 mm/min W-Axis Movement 700mm W-Axis Rapid Traverse 7100 mm/min Tools Dwjdpfx Adsx D Epvjujf Type of tool holder SK50 Clamping Unit Clamping force 25 kN This 4-axis UNION BFK 150/2 Bed Type Milling Machine was manufactured in 1991. It features a Heidenhain control system and SK50 tool holder, with travel distances of X=3000mm, Y=2000mm, Z=1600mm, and W=700mm. If you are looking to get high quality milling capabilities consider the UNION BFK 150/2 machine we have for tact us for more information. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand SELCA Model SELCA 3040 Main Drive Spindle speed range 5000 Spindle motor power 22 kW Tool taper ISO 50 Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 1250 mm Z-Axis Movement 1250 mm Media Chip conveyor Yes Additional Equipment Dwjdjx D E T Iepfx Adujf Remote handwheel Chip conveyor Through-spindle coolant This 3-axis Parpas THS125/2000TG was manufactured in 2003. It features a SELCA 3040 control unit, a main spindle with 5000 rpm and 22 kW power, and an electrospindle that reaches up to 28,600 rpm. The machine includes a 24-position tool changer and accessories like a chip conveyor and through-spindle coolant. If you are looking to get high-quality milling capabilities consider the Parpas THS125/2000TG machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2017, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model ITNC 530 Main Drive Dodpfox D E Ulex Adujwf Number of axis 4 Movement X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Z-Axis Movement 1100 mm Additional Equipment Direct hydraulic balancing system (double cylinder) Workpiece : Fixed table: 3100x1000 mm Table : External low-pressure spindle cooling system Disc tool magazine with 24 ISO50 positions, with tool exchanger arm, complete with support and management software located at the end of X-axis travel Hydraulic system, power supply, and wiring / 6000 W cooling unit / Hydraulic and electric cabinets (Rittal) on the ground Work area lighting; Machine and spindle hour counters / External operator station on the ground – mobile operator panel / C-axis with torque motor 2 longitudinal screw chip conveyors + 1 transversal belt conveyor / Safety fences including panels and sliding steel door with Lexan window, compliant with CE safety standards. Upper cover included. Dividing wall and software setup for pendulum machining / Renishaw RMP60 digital probe BLUM fixed laser presetter station, including Blum measurement cycles + zeroing sphere Voltage: 400 Vac / Frequency: 50 Hz This 4-axis JOBS FRAZER cnc milling machine was manufactured in 2017. It features a large fixed table of 3100x1000 mm and high-speed axes capable of up to 35 m/min, ensuring efficient machining. The machine includes a Heidenhain iTNC 530 HSCI CNC for precise control and a 24-position disc tool magazine. If you are looking to get high-quality milling capabilities, consider the JOBS FRAZER machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1991, condition: ready for operation (used), Control Unit Dodox D Humepfx Aduewf Brand HEIDENHAIN Model TNC 415 This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Application Types Sawing (Wood) Dwjdpfx Ajx D Hxroduef

Year of construction: 2008, condition: ready for operation (used), Main Drive Spindle speed range 2410 Number of axis 2 Additional Equipment Integral protective hood around cutting area Mobile head roller table (3 m) This SCHÜCO PDG e-Cut 600 was manufactured in 2008. It features tungsten carbide sawblades Ø600 mm, three-phase motors 4 kW at 2800 rpm, and blade rotation speed of 2410 rpm. The machine includes electronic control for head tilting, mobile head with automatic positioning, and is set up for chips and fumes extraction. Consider the opportunity to buy this SCHÜCO PDG e-Cut 600 Optimizing Cross-Cut Saw. Contact us for further details regarding this machine. Application Types Sawing (Wood) Dsdpfox D H Elex Aduswf

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand SELCA Model S 4045 PD Movement X-Axis Movement 2500 mm Y-Axis Movement 1400 mm Z-Axis Movement 1500 mm Additional Equipment Spindle head: KOSMO 5000 / Layout code: K0590 M4T 40 / Color: Blue RAL 5000 / Azzurro RAL 6027 / Voltage: 380/50 This SACHMAN TRT314 H was manufactured in 2008. A robust bed type milling machine featuring a large table size of 1200 x 1200 mm and extensive X, Y, Z travels of 2500 mm, 1400 mm, and 1500 mm respectively. It includes a SELCA S 4045 PD CNC for precise control and dual chip conveyors for efficient chip evacuation. Consider the opportunity to buy this SACHMAN TRT314 H bed type milling machine. Contact us for more information. Dwjdpfex D H E Ssx Adujf Application Types Milling

Year of construction: 2001, condition: ready for operation (used), General Data Dodpfx Adjx D If Hjuewf Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Stroke 1350 mm Additional Equipment Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Year of construction: 1990, condition: ready for operation (used), General Data Measurements width 3000 mm Measurements depth 5000 mm Measurements height 2500 mm Machine weight 12000 kg Control Unit Brand FAGOR Main Drive Spindle speed range 3000 Spindle motor power 15 kW Tool taper ISO 50 Number of axis 3 Movement X-Axis Movement 2000 mm X-Axis Rapid Traverse 10000 mm/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 10000 mm/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 10000 mm/min This 3-axis Correa XB-420 Bed Type Milling Machine was manufactured in 1990. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this Correa XB-420 Bed Type Milling Machine. Contact us for more information. Dwjdpfox D Ihhex Adusf Application Types Milling

Year of construction: 2018, condition: ready for operation (used), This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. Dsdpox D Rf Asfx Aduowf Application Types Other Sheet Metal Machinery

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2180 mm Measurements height 3350 mm Machine weight 9300 kg Additional Equipment Lower Hydraulics Pressure Force: 350 kN / Lower Hydraulics Travel: 200 mm / Lower Hydraulics Table Size: 400x400 mm / Lower Hydraulics Travel Speed: 52 mm/min This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine. Dwodpfxox D S Dys Adujf Application Types Punching

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 3800 mm Measurements depth 8100 m Measurements height 3395 mm Machine weight 17000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 3000 Spindle motor power 22/27 kW Number of axis 4 Movement X-Axis Movement 3000 mm Y-Axis Movement 900 mm Z-Axis Movement 1500 mm Table Number of tslots 5 Table load 6000 kg This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine. Application Types Milling Dwedjx D S Tzepfx Aduef

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Dwsdpfx Ajx D Dagodusf Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: used, New: Yes Colour: Blue Field of application: Mining Empty weight: 35.000 kg Dimensions (LxBxH): 1400 x 400 x 250 cm Runnning hours: 16777215 mh Volume of the tank: 30 m^3 Capacity: 350 Productivity: 300 tph (1400 x 14000) Double Washing Screw: (With SKF AUTOMATIC LUBRICATION) Water Consumption : Minimum 100 Ton/Hour – Maximum150 Ton/Hour Dwedpfjx D A E Ijx Adusf Capacity 300-350tph Screw Dimensions Ø1400 x 14.000 mm Motor :2x45/55 KW Drive System :Chained Drive System Roller : SKF Abbrasive : 6 mm on iron plate 10 mm Rubber Coated Discharge : Ø200 mm Pipe Discharge Channel : 2 PCS 120 mm 150 mm 5mm U Bend Platform : Ladder for Pre Maintenance and Safety Weight 35000kg Paint PPG or Jotun 2 Layer Paint on1 layer Epoxy Lining RPM 25 Degree 15 Dimensions 4400x15500x2600mm Housing Bearing Water Resistance SKF-FAG BEARING 6 PCS

Condition: used, Colour: Red Field of application: Mining Dwedex D A Dwjpfx Adujf Take your material processing capabilities to the next level with Polygonmach’s Fine Material Washer. Known for their engineering excellence and innovative solutions, Polygonmach has yet again pushed the boundaries with their advanced Spiral Classificator and Screw Washer. Designed for maximum efficiency and performance, this system offers an unmatched processing solution for a variety of materials. The Polygonmach Fine Material Washer, also known as Spiral Classificator or Screw Washer, is a powerful tool for sand classification and dewatering duties. It is specially designed for washing, classifying, and dewatering fine material as well as for scrubbing and expelling clays and silts from raw materials. The design offers a high level of cleaning, improving the quality of your end product. While it is mainly used for cleaning and handling of sand and gravel, it also works with many other minerals. When you need the highest level of cleaning, this washer is your go-to solution. The Polygonmach Fine Material Washer's superior design ensures optimal performance. It features replaceable, wear-resistant paddles that enhance the machine’s longevity. The system also comes with an adjustable weir and water volume to meet your specific washing needs. To achieve the desired results, the Polygonmach Fine Material Washer is equipped with a heavy-duty design and construction. It is highly efficient, delivering precision, and accuracy in its operations. Despite its robust construction, it is easy to maintain and has low operational costs.