Cb-Med

Condition: ready for operation (used), Year of construction: 2008, total width: 1,350 mm, total height: 2,100 mm, overall weight: 2,200 kg, product length (max.): 7,000 mm, Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine. • Total power: 45.5 kW • Power supply voltage: 400 V • Operating voltage: 110 V • Current type: AC • Frequency: 50 Hz • Motor protection: IP55 • Air pressure: 6 bar • Air consumption (primer): 100 NL/min • Air consumption: 40 NL/min Godpfxezugvxo Ai Sebr • Extraction diameter: Ø100 mm • Air flow rate: 700 m³/h Additional equipment • Pre-melter: approx. 200 kg; dimensions approx. 1050 × 820 × 1830 mm • Flame treatment unit with ozone filter: approx. 500 kg

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position Gbsdpfxjzugvrj Ai Ssr • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Year of construction: 2026, condition: new, Messan 500CW - Machine for cutting and hole punching in reinforcement sheet iron - Working system - hydraulic - Punching the handle and lock holes - Punching and cutting moulds can be changed - Maximum thickness of the iron sheer 2.5 mm Gbjdjzugvljpfx Ai Ssr - Option - special mould for different forms

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,860 mm, travel distance Y-axis: 1,793 mm, travel distance Z-axis: 185 mm, number of axes: 3, overall weight: 4,300 kg, spindle motor power: 17,000 W, spindle speed (max.): 24,000 rpm, This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. • Electrical power: 400 V · 50 Hz · 3~+N · 17.5 kW · 35 A · 24 V • Milling spindle: 1 unit • Working field (X/Y/Z): 3250 × 1250 × 1215 mm • Rapid traverse speed (X/Y/Z): 100 / 50 / 20 m/min Gedpszugvfofx Ai Sobr • Routing area: 3595 × 1378 × 125 mm • Alternative operation area: 1450 mm • Two-field operation area: 1100 mm • Compressed air required: 7 bar • Dust extraction (minimum): 3170 m³/h

Condition: ready for operation (used), Year of construction: 2010, This 3-axis MASTERWOOD OM B1 CN3KF was manufactured in 2010. It features a Bedano head and a horizontal milling motor, ideal for creating slots for shutters or blinds. With a working length of 2600 mm and a very good condition, it includes a PC with integrated software running Windows XP. Consider the opportunity to buy this MASTERWOOD OM B1 CN3KF CNC Wood Machining Centre. Contact us for more information. Machine Benefits Gbedpjzugu Usfx Ai Sjr Technical Machine Benefits • Working length: 2600 mm • The machine has a bedano head + horizontal milling motor to make slots for shutters or blinds. • The software is integrated into the supplied pc and can make slots with bedano and slots for shutters. • Supplied pc with windows xp operating system. • Very good condition and does not have many working hours. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm Godpjzugu Iefx Ai Sjbr • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: used, mileage: 21,731 km, power: 129 kW (175.39 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 2,744 kg, maximum load weight: 756 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,450 mm, next inspection (TÜV): 08/2028, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, loading space volume: 2 m³, loading space length: 3,600 mm, loading space width: 2,000 mm, loading space height: 400 mm, maximum speed: 160 km/h, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), hydraulics, immobilizer system, soot filter, traction control, trailer coupling, truck registration, * Vehicle ID/VIN: ZCFC635C7N5504371 * New inspection/MOT * New service Nationwide delivery possible!!! Trade-ins accepted!!! Leasing and financing options available, even without a down payment. Gsdpfjzuguuex Ai Ssbr Errors, printing errors, and prior sale are subject to change.

Condition: used, mileage: 240,577 km, power: 125 kW (169.95 HP), first registration: 02/2016, fuel type: diesel, empty load weight: 2,395 kg, maximum load weight: 1,105 kg, overall weight: 3,500 kg, wheelbase: 3,520 mm, next inspection (TÜV): 03/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, maximum speed: 160 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, truck registration, * Transmission occasionally indicates a malfunction!!! * Vehicle is ready to drive * Vehicle ID number: ZCFC135C505077361 * TÜV/MOT valid until: Special equipment: * Storage compartment package * Trailer socket preparation * Audio navigation system: CD player with MP3 capability, USB, and Bluetooth hands-free system * Electrically adjustable and heated exterior mirrors * Roof storage compartment with DIN compartment * Driver assistance system: Lane monitoring assistant * Vehicle key with remote control * Rear axle suspension: Air suspension * Speed control system (cruise control) * Rear door (opening angle 260 / 270 degrees) * Wooden floor in the cargo area * Automatic climate control * Instrument cluster with pixel matrix display * Head airbag system (window bag) * Fuel tank: 90 liters * Compressor 170 ccm * Fog lights with static cornering lights * Reversing camera preparation * Seats in the driver's cab: Luxury driver's seat Standard equipment: * Airbag, driver side * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Drive type: Rear-wheel drive * Model: S-series * Exhaust pipe on the left side * Brake assist Gsdpfx Aiozuguzs Sjbr * Interior light in the cargo area * Electronic brake force distribution * Electronic stability program (ESP) * Front axle suspension: Transverse leaf spring * Power windows * Wing doors at the rear * Tinted windshield and side windows * Generator 150 A * Transmission: Automatic - Hi-Matic (8-speed) * Body/superstructure: High-roof box van with overhang * Cargo area partition * Headlight range adjustment * Engine: 3.0 L - 125 kW Diesel catalytic converter * Wheelbase 3520 mm * Tire repair kit * Diesel particulate filter * Low emissions according to Euro 5 emission standard * Sliding door for cargo/passenger compartment, right side * Power steering * Seats in the driver's cab: Double passenger seat with headrests * Steering AV overhang * Daytime running lights * Immobilizer * Central locking with remote control * Permissible total weight: 3.50 t Delivery possible throughout Germany!!! Trade-in possible!!! Leasing and financing possible even without a down payment Errors, printing errors and prior sale are subject to change.

Condition: excellent (used), mileage: 364,995 km, power: 228 kW (309.99 HP), first registration: 10/2007, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, total length: 9,700 mm, total width: 2,500 mm, total height: 3,450 mm, Year of construction: 2007, Equipment: AdBlue, = Additional options and accessories = - PTO = Notes = Despite our best efforts to ensure the accuracy of the data, we cannot be held liable for any errors in this advertisement. Images may differ from the actual vehicle. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = Technical information Number of cylinders: 6 Engine displacement: 9,186 cc Axle configuration Front axle: Steerable; Suspension: Leaf spring suspension Rear axle 1: Steerable; Suspension: Air suspension Rear axle 2: Dual tires; Suspension: Air suspension Weights Unladen weight: 14,590 kg Payload: 11,410 kg GVW: 26,000 kg Functional Pump: Yes Gbsdpfxszuguno Ai Sor Condition Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.

Condition: ready for operation (used), Year of construction: 2011, total width: 4,200 mm, total height: 2,900 mm, overall weight: 700 kg, Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details. Gbsdpfx Aiszuguhj Ssr • Cutting capacity: horizontal 3,300 mm; vertical 2,200 mm; cutting depth 60 mm • Saw motor power: 4.0 kW • Electrical: 400 V, 50 Hz • Blade diameter: 250 mm • Blade speed: approx. 5,450 rpm • Cutting directions: vertical and horizontal • Angle cutting device: 0°, 22.5°, 45° • Dust extraction interface: port diameter 120 mm; required capacity approx. 1,400 m³/h • Control system: Integrated HOLZ-HER control (electronic positioning system) • Safety equipment: full blade guarding; two-hand safety control; mechanical hold-down system Dimensions Machine Depth 1600 mm

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,200 kg, total width: 1,200 mm, total height: 1,900 mm, product length (max.): 2,800 mm, number of axes: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: Longitudinal milling • Capabilities: • Max milling length: 1300 mm • Max milling diameter: 300 mm Godpfx Aezugubsi Sobr • Max recommended workpiece size: 1300 x 150 mm • Cutter shaft speed: 5300 rpm • Operation/features: Low-vibration, smooth running; high dimensional accuracy and clean surface finish • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-contoured parts • Material suitability: Hardwood, softwood, multiplex, MDF, selected plastics (with suitable cutters) • Typical applications: • Tool handles, hammer/axe/garden tool handles, walking stick handles • Gun stocks, pistol grips, bow risers • Furniture parts: armrests, back rails, handles, decorative moldings, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements • Foundry patterns, gauges, templates, fixture components • Knife and tool handles, pestles, kitchen utensil handles • Certification/conformity: CE marked; EC declaration of conformity available • Test run: Possible under power by appointment • Included: Machine as shown Additional equipment • Optional: Additional milling cutters available • Optional: Additional templates (only if shown or explicitly mentioned)

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment Gbodpfxezugtwo Ai Sor With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.

Condition: used, mileage: 367,906 km, power: 390 kW (530.25 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 8,311 kg, maximum load weight: 11,189 kg, overall weight: 19,500 kg, tire size: 385/65 R 22.5, wheelbase: 4,000 mm, next inspection (TÜV): 06/2027, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,500 mm, total width: 83,110 mm, total height: 65,200 mm, Year of construction: 2023, front tire size: 315/70 R 22.5, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, spoiler, Stand-alone air conditioning, ABS, work lights, electrically adjustable and heated exterior mirrors, hands-free mobile phone system, ventilated driver's seat, sunroof, differential lock, electric windows left and right, XG+ cab, air-sprung driver's seat, leaf-spring/air suspension, 12 gears, automatic transmission, air conditioning: automatic climate control + stand-alone air conditioning, leather steering wheel, multi-function steering wheel, navigation system, entertainment: navigation system with screen, sleeper cab, 2 sleeping berths, heated driver's seat, spoiler package, cruise control, safety package: adaptive cruise control + emergency braking assist + lane assist + turning assist, auxiliary retarder brake, Euro 6 engine, LED taillights, LED headlights, adaptive cruise control. Gbodpozugr Hsfx Ai Sjr

Condition: used, empty load weight: 8,966 kg, maximum load weight: 27,034 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 10/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 140,400 mm, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2019, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Equipment: ABS, cooling unit, ABS, axle manufacturer Schmitz SCB, type: freezer trailer, operating hours: 12,214 diesel / 656 electric, double-deck with beams, electrical connection, suspension: air-lift, lifting and lowering, refrigeration unit manufacturer: Thermo King, lift axle: 1st axle, air distribution channels, tarpaulin with strap fastening, pallet box: 36, wheelbase: 7600, brakes: disc brakes, fixed side underrun protection, standard color: white, forklift accessible, start/stop function, temperature recorder: Euroscan, refrigeration unit type: Thermo King SLXi 300, doors: swing doors, evaporator: 1, toolbox, anti-spray, ABS / EBS, roof rails, circulation wall, aluminum floor, double spare wheel holder with wheel, ferry lashings, spare wheel holder with 1 x wheel, remote thermometer, load securing rail, very good condition!!! Gbjdpfx Aezugr Tji Sjr

Condition: used, empty load weight: 7,645 kg, maximum load weight: 28,355 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2016, next inspection (TÜV): 02/2027, loading space length: 13,630 mm, loading space width: 2,490 mm, loading space height: 2,780 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 138,860 mm, suspension: other, tire size: 385 / 55 R 22,5, color: blue, Year of construction: 2016, front tire size: 385 / 55 R 22,5, rear tire size: 385 / 55 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, Edscha sliding roof, lifting and lowering mechanism, lift roof, lift axle on the first axle, trailing axle on the third axle, storage compartment 2, insertion boards, 3 rows, aluminum, Wabco Smartboard, customs seal wire, 2 x pallet stop rail, Multilock outer frame, forklift bracket. Gedpszugryjfx Ai Sebr

Condition: used, mileage: 1,257,513 km, first registration: 02/2015, fuel type: diesel, empty load weight: 9,768 kg, maximum load weight: 8,232 kg, overall weight: 18,000 kg, tire size: 385 / 65 R 22,5, next inspection (TÜV): 05/2027, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, total length: 25,500 mm, total width: 39,850 mm, total height: 61,150 mm, Year of construction: 2015, front tire size: 315 / 740 R 22,5, Equipment: air conditioning, differential lock, parking heater, spoiler, Stand-alone air conditioning system, electrically adjustable and heated exterior mirrors, hands-free mobile phone system, air-suspended passenger seat, differential lock, electric windows on the left and right with double glazing, Topline cab, air-suspended driver's seat, air/air suspension, radio, automatic transmission – 2 pedals, climate control: automatic climate control + stand-alone air conditioning system, refrigerator, leather steering wheel, air horns, fog lights, sleeper cab, 2 sleeping berths, heated driver's seat, spoiler package, standard auxiliary heater, additional retarder brake, Euro 6 engine, LED taillights, 2 fuel tanks, complete frame cover, rear modification with LED taillights and sequential turn signals, leather seats, complete interior lined with artificial leather, dashboard and switches painted, many beautiful chrome and lighting details, too many to list, low bars with LEDs, lamp bar with 4 long-range headlights and 2 rotating beacons, Alcoa rims, and more. Single driver, very well maintained, no outstanding maintenance or current faults. Gbedpfx Aszugrtji Sor

Condition: used, 10 pieces of carbide cutting inserts, HM cutting inserts, indexable inserts WIDIA Cutting insert with chip guide and cylindrical bore Type DNMM 150 612 TK15 Nominal size: 15 mm Cutting radius: 1.2 mm Rhombus angle: 55° Insert thickness: 6.35 mm Dimensions according to the sketch: D = 12.7 mm L10 = 15.5 mm = edge length of the rhombus S = 6.35 mm = insert thickness R = 1.2 mm = cutting radius Gbodpfx Aszugqpji Ser D1 = 5.16 mm = cylindrical clamping bore 10 pieces = 2 packaging units, each with 5 inserts There are 160 packaging units available. The price quoted refers to 2 packaging units.

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Gbedozugqijpfx Ai Sor Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Godpfszugn Iox Ai Sjbr Weight: 100 kg In good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Gedpfx Ajzugnzji Sjbr Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Hook travel: 2.8 meters Lifting speed: 8 m/min Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition Gjdjzugnujpfx Ai Ssbr

Condition: used, Metalworking vises, EMF 100 Gbjdjzugm Repfx Ai Ssr Height-adjustable and rotatable Price per unit: €80.00

Condition: excellent (used), 513 USED Divider for bread, rolls, ciabatta, square bread and rolls, and round rolls. Includes a rounding function. Gbjdpfx Aszugm Dei Sor The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, empty load weight: 4,435 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 08/2026, tire size: 385-55 R22.5-385-55 R22.5, Year of construction: 2022, Ref: F1036684 Gbodpfezugmdox Ai Sor Equipment: * Air connection: Red/Yellow connector * Electrical connection: 1 x 15-pin + 2 x 7-pin * ABS * EBS * Side impact protection * Lift axle: 1 VIN: WKESD000001036684 Tire size: 385-55 R22.5 Width: 2.46m Height: 1.29m

Condition: used, mileage: 772,457 km, power: 353 kW (479.95 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 3,650 mm, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, fridge, power assisted steering, second fuel tank, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Alloy wheels - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Immobilizer = Additional Information = Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Steered; Suspension: Parabolic leaf spring suspension Rear axle: Tire size: 315/80 R22.5; Dual tires; Suspension: Air suspension Unladen weight: 7,996 kg APK (Technical Inspection): Valid until 03/2027 Gbedpfxjzugl Ts Ai Ssr Reference number: 52