Volker Gross Werkzeugmaschinen GmbH

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale: CU 1000 machining center PILOTE TECHNOLOGIES (1998) 1000x500y500z, Fanuc OM CNC, 3 axes plus 4th axis rotary table, year 1998 Gbodpfx Ahsxv Ah Ts Sew

Condition: excellent (used), Year of construction: 2020, spindle speed (min.): 50 rpm, spindle speed (max.): 2,000 rpm, The machine is in good technical condition; an inspection in operation is possible by arrangement. CNC control: Heidenhain 426. X-axis (longitudinal): 1250 mm Y-axis (cross): 900 mm Z-axis (vertical): 940 mm Table length: 1000 mm Table width: 1120 mm Max. workpiece weight: 3000 kg Spindle diameter: 100 mm. Spindle speed min./max.: 50/2000 General overhaul in 2020. Godpfxexvr Ebs Ah Sjbw

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. CNC control: Siemens 840D Solution Line Working range: X-axis: 1.600 mm Y-axis: 1.250 mm Z-axis: 1.600 mm B-axis: 360.000 x 0.001 deg. Gbedpfoxvrk Rex Ah Ssw HV-axis 360.000 deg. Feed range: X/Y/Z: 30 m/min Feed force: 20 kN Rotary table torque: 25.000 N Pallet size: 1.000 x 800 mm Pallet load capacity: 3.000 kg Spindle speed: up to 8.000 rpm Tool holder SK 50-B Spindle motor power 37 kW Equipment: 2-station pallet changer 330-position tool changer (max. tool length 600 mm) Tool taper cleaning system Special cabin Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Gjdpfx Ahsxvrbij Ssbw Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Gsdpfx Aoxvn Uxoh Sebw Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travels: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul due: 08/2025 Equipment: Swivel head -90 degrees to +90 degrees, indexed at 2.5-degree increments NC rotary table, brand SEMPUCO, 400 mm Spindle speed: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through spindle External coolant Paper band filter Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport details – see PDF. Illustration, content, and information provided without guarantee and therefore non-binding. All other accessories visible in the photos and videos are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only includes the accessories explicitly specified here, in the order confirmation, and on the invoice. FCA (Free Carrier – loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: December 2025 Subject to prior sale / Payment due immediately upon completion of purchase

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade Gbsdsxvn Hzepfx Ah Ssw - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Gbodsxvlrbopfx Ah Ssw Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working Gbedoxvlqqjpfx Ah Sew • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, Year of construction: 2010, x-travel 2000 mm y-travel 2000 mm z-travel 2000 mm Control SIN840D B - axis 360 x 0,001 ° A - axis -90 - +90 x 0,001 ° Gbedpjxvdq Aofx Ah Sjw feed X/Y/Z/-axis 1 - 30000 mm/min rapid traverse X/Y/Z 30,00 m/min feed B-axis ° / min feed A-axis ° / min spindle turning speed - gearbox stage 1 1 - 1096 1/min spindle turning speed - gearbox stage 2 1096 - 6000 1/min power capacity 45,00 kW tool taper HSK-A 100 max. torque on the spindle max.1250 Nm tool magazin: 207 + 10 tool length - max. 700 mm tool diameter 300 mm pallet size 2x 1000x1000 mm workpiece weight 5000 kg T-slots DIN650 T-slot - distance 100 mm T-slot - width 22 mm number of T-slots 1 + 8 total power requirement 100,00 kW dimensions of the machine ca. 13,00 x 8,00 x H4,50 m 5-axis simultaneous machining center with control SIEMENS SIN840D, measuring probe, chip conveyor, coolant system, coolant through the spindle, pallets with 5-fold media connection and clamping hydraulics, suction, swivel spindle A-axis 0-90 °, NC rotary table B-axis.

Condition: refurbished (used), Year of construction: 1986, Parts shown by hand not come. Gedpfx Ahjxvaz Ro Sobw

Condition: used, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,180 mm, travel distance Z-axis: 1,400 mm, X-MM.1600 Y-MM.1180 Z-MM.1400 B-POSI.360000 Gjdpsxuvv Isfx Ah Sobw H.WORKABLE MM.1500 DIM.TABLES MM.800x1000 TABLES CAPACITY KG.2500 ROTATION TABLES 360000 POS. SPEED TABLES ROTATION RPM 14 SPINDLE MOTOR POWER.KW.37 SPINDLE SPEED. RPM.30-6000 SPINDLE TAPER ISO 50 -DIN 69871 SPINDLE SHANK ISO 7388/2 RAPID & WORK FEEDS MM/MIN.28000 CNC SIEMENS 840D AUTOM TOOL CHANGER 60 POS N.2 ROTARY TABLES N.1 HEAD OVER (VERT-HORIZZ) CHIP CONVEYOR HYDRAULIC CONTROL UNIT WITH FRIDGE UNIT INT AND EXT COOLANT SYSTEM LOGIC FOR HELICAL INTERPOLATION DISP. PALLET ACCESS DOOR SECURITY DOUBLE NUT PRELOADED ON LINEAR AXES LINEAR AXIS OPTICAL LINES AND CIRCULAR AXES ENCODER X-Y-Z AXES TELESCOPIC PROTECTIONS ELECTRIC CABINET WITH AIR CONDITIONER

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º Gsdjxur Sxjpfx Ah Sobw B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Gjdpfxoxuqv Ae Ah Sobw Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm Godjxuqn Sopfx Ah Sobw B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 2300 mm Measurements depth 5100 mm Measurements height 3090 mm Machine weight 12600 kg Control Unit Brand HEIDENHAIN Model i TNC 530 Main Drive Spindle speed range 15000 Spindle motor power HSK-A 63 Number of axis 5 Movement X-Axis Movement 1350 mm Y-Axis Movement 1150 mm Z-Axis Movement 700 mm A-Axis Movement 136° (-16 +120) Table Table load 1600 kg Additional Equipment A.P. cooling through spindle Chip evacuation Tool control with Dual Laser Radio frequency touch probe Gbsdpsxulavofx Ah Sew Air through spindle APS (Advanced Process System) ITC (Intelligent Thermal Control) This 5-axis MIKRON HPM 1350U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON HPM 1350U machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, Serial no. 11480001523, Heidenhain control, type iTNC 530, 5 axes, travel X/Y/Z 1,000 x 1,000 x 1,000 mm, max. spindle speed 24,000 rpm, 2-station pallet changer, 120-position tool changer, HSK 63 tool holder, compact coolant unit, through-spindle coolant (IKZ), belt filter, chip conveyor, BLUM laser measurement system, tool and accessory package including: 2 table trolleys, drawer container with 7 pull-outs, mobile, WTS trolley, contents: HSK 63 tool holders, FCS zero-point clamping system, 10 grid plates of various sizes, operating hours: 44,190; 96,709. Gedexugznepfx Ah Ssbw

Condition: ready for operation (used), Year of construction: 2005, Available immediately from CH location : 5 axes machining center Reiden Type Reiden BRF 1 Year of construction 2005 Spindle renewed in 2022 ( 28.000.-Euro ) CNC control Heidenhain iTNC 530 Electronic handwheel Table diameter 800 mm Table load 800 kg X axis 1200 mm Y axis 600 mm Z axis 700 A axis minus 180 pkus 180 degrees B axis minus 90 plus 90 degrees SK 40 Magazine 72 places IKZ 20 Bar Number of controlled axles 5 Power on the spindle 25 kw Spindle speeds 0 - 6300 rpm Feed x axis 20000 mm / min Feed Y axis 20000 mm / min Feed Z axis 20000 mm / min Coolant device Chip conveyor Gbjdpfx Ahoxud U Es Sjw Weight 9 to At a price of Euro 36.500.---plus VAT ex location

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system Godpfxext En Ds Ah Sobw • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 5,000 kg, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center by DMG with TNC7 control system Retrofit 2025 DMG Deckel Maho DMU 200 P Year of manufacture: 1999/2025 Gbedpfx Aoxtwkwoh Sow Condition: Good and fully functional Control: Heidenhain TNC7 Travel distances: - X-axis: 1800 mm - Y-axis: 2000 mm - Z-axis: 1100 mm Technical specifications: - Rotary table Ø1400 x 1700 mm - Table load capacity: 6000 kg - B-axis - 60-position tool changer - SK 50 spindle taper - 10,000 rpm - ICS (internal coolant supply) - 980-liter coolant tank - Chip conveyor - Rinsing gun - Infrared probe Optional: - Kineopt - VCS-Complete - High-frequency spindle, 30,000 rpm Transport and commissioning can be offered separately. Interim sale reserved. No guarantee is given for the technical details provided here. Statutory regulations apply.

Condition: used, Year of construction: 2003, functionality: fully functional, REIDEN - BFR 22 Offer Details Stock number: 1039-9086 Machine type: Universal Machining Centre Manufacturer: REIDEN Model: BFR 22 Year of manufacture: 2003 Control: TNC 430 Heidenhain Location: North Rhine-Westphalia Country of origin: Switzerland Delivery time: by arrangement Freight terms: ex site Additional Information 4-axis universal machining centre REIDEN - BFR 22 WE OFFER YOU: • Workshop-inspected machines • Free loading onto truck • NO auction fee • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details X travel: 2,000 mm Y travel: 1,000 mm Z travel: 1,200 mm Control: TNC 430 Heidenhain Main spindle: Speed range – main spindle: 20 – 5,000 rpm Gear stages: 2 Drive power – main spindle: 30 (100%) / 45 (40%) kW Torque: 1,050 / 1,580 Nm Tool holder: HSK 100 Swiveling: B: +/- 180° B-axis increment: 0.001° Worktable: Table clamping surface: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm Gbodpfxoxtpbus Ah Sow T-slots: 18 H7 Number of T-slots: 10 Tool magazine: Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 sec Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feeds: Feed rate X, Y, Z: 0 – 20,000 mm/min Feed rate B: 10 1/min Power X, Z: 15.7 / Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N Total power requirement: kW Machine weight approx.: 23 t Space required approx.: 8.0 x 8.0 x 3.3 m Accessories • Chip conveyor • Coolant system • High-pressure coolant • Internal coolant supply • Oil mist extraction • Paper band filter • B-axis 0.001° • Spindle oil cooler • Probing system: Blum TC 60 • Electronic handwheel • Automatic door • Vice: 4x • Clamping table: 2x (50 x 50 x 37 cm)

Condition: used, Year of construction: 2016, operating hours: 24,000 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, table load: 400 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 500 h, spindle motor power: 40,000 W, number of slots in tool magazine: 36, tool length: 520 mm, tool diameter: 205 mm, 5-Axis Working Area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed / Rapid Traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis Acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table Load Capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool Magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm Gedpfxoxtndzs Ah Ssbw -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s Machine/Asset does not include any product-related tool, fixture or gripper (robot).

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 1800 mm .. Y-axis travel: 2000 mm .. Z-axis travel: 1100 mm TABLE .. table surface (left-right): 1700 mm .. table surface (front-back): 1400 mm .. workpiece load (max): 5000 kg SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: HSK E100 .. drive power S6 40%: 44 kW .. drive power S1 100%: 32 kW TOOL MAGAZINE .. number of positions: 100 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8400 mm .. space requirements -front/back-: 9000 mm .. total height: 4200 mm .. total weight approx.: 35000 kg Gbjdpfx Ahsxtiwcj Sew ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Equipment: - Infrared measuring probe Heidenhain TS 641 - Coolant tank 900 l - IKZ 40 bar through spindle center (AD) - rotating lens - Electronic handwheel - 3D path control Optional: - hyd. Clamping system (Stark)

Condition: used, Year of construction: 2023, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2023 Control : Heidenhain TNC 640 Speed : 15000 rpm Movement X/Y/Z : 1550/650/550 mm Tool holder : HSK 63 In General: Year of manufacture:2023 Control system:Heidenhain TNC 640 Speed:15,000 rpm Tool holder:HSK 63 Traverse path X/Y/Z:1,550/650/550 mm Spindle: Technology:Inline direct Speed:15,000 rpm Gjdpfx Aexthp Rjh Sebw Power:17 kW Tool holder:HSK 63 NC-swivel table: B-axis:+/- 110° C-axis:360° Clamping surface:600 mm Max. table load:500 kg Fixed table: Clamping surface:800 x 800 mm Max. table load:1,000 kg Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Tool diameter max.:75 (127) mm Tool length max.:350 mm Equipment: Measuring systems:Direct (glass scales) Chip disposal:Chip conveyor Coolant supply:Internal cooling, 20 bar Workpiece measurement:Wireless measuring probe Tool measurement:Tool measuring probe Set-up mode:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2018, operating hours: 11,000 h, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Number of axis 5 Movement Z-Axis Movement 700 mm X-Axis Movement 1350 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 1150 mm Y-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 1600 kg Table Godoxtgpcspfx Ah Sebw Table load 1600 kg Tools Slots in storage 30 This 5-axis +GF+ MIKRON HPM 1350U was manufactured in 2018. Ideal for advanced machining, this universal machining centre ensures precision and efficiency. Consider the opportunity to buy this +GF+ MIKRON HPM 1350U universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm Gbjdpfjxrvi Asx Ah Sjw control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling