Meltko S.A.

Condition: used, Set of Grundfos pump system with Grünbeck reverse osmosis system Extensive pump and water treatment system with numerous Grundfos stainless steel multi-stage pumps and a Grünbeck reverse osmosis system. Pump manufacturer: Grundfos Pump type: CRNE 32-1-1 A-F-G-E-HQQE Pump design: vertical multi-stage centrifugal pump Flow rate: 30 m³/h Head: 10.7 m Maximum head: 16 m Pump power P2: 1.50 kW Speed: 2,896 rpm Hsdpfx Aszupyyobiefk Frequency: 50 Hz Maximum pressure: 16 bar Maximum fluid temperature: 120 °C Pump control: Grundfos MGE frequency inverter Piping system: extensive piping with shut-off valves and filter housings Reverse osmosis system manufacturer: Grünbeck Wasseraufbereitung Type: GENO-OSMO-MSR 250 Permeate continuous output at 15 °C: approx. 250 l/h Salt rejection: 95–99 % System recovery: 75 % Inlet flow pressure: 2.5–5.0 bar Feed water temperature: 10–30 °C Mains connection: 400 V / 50 Hz Electrical connection power: approx. 0.75 kW For sale as a comprehensive set, including existing pump, piping, and water treatment technology.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, electric motor, electric motor from coolant pump -Manufacturer: Brinkmann Pumps, electric motor from coolant pump TH 45/543 Hodjzucmgopfx Abiefk -Power: 3.3 kW / 2900 rpm -Shaft: Ø 14 x 18 mm -Design: B14 -Protection class: IP 54F -Dimensions: 380/260/H220 mm -Weight: 25.7 kg

Condition: excellent (used), Year of construction: 2022, Wangen Twin NG70 Screw Pump Hedozt Ibgopfx Abiofk 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump Hfodpfx Absztpq Aoiek -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump -Type: unfortunately no exact designation -Item No.: 122 Container capacity: 2.7 l -Dimensions: 235/140/H310 mm -Weight: 5.4 kg

Condition: good (used), Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Handover: in its current condition as inspected -Level indicator: damaged, see photos -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: approx. 65 L / 250x930x280 mm -Individual components: see photos -Transport dimensions: 930/440/H425 mm -Weight: 16.6 kg Hedpfxezr Up Ue Abisfk

Condition: good (used), Year of construction: 2018, DOPAG P200 2H Drum Pump / Material Transfer Pump Both the standard version and the tandem version are available. Manufacturer: DOPAG Dosiertechnik und Pneumatik AG Product type: Pneumatic drum pump / material transfer pump Series: P200 Version 1: Drum pump P200 2H Version 2: Drum pump P200 2H tandem Hedpfjzr Tz Ajx Abiefk Operating concept: 2-hand operation Drive: Pneumatic Compressed air supply: 6 bar Maximum container size: 200 l Maximum container height: 880 mm Year of manufacture: 11/2018 Weight P200 2H: 386 kg Weight P200 2H Tandem: 394 kg Material feed: Directly from the original container Pump principle: Piston pump Compressed air treatment: Festo SMC valve type: VSA4244-00-1 The DOPAG P200 systems are designed for the transfer of highly viscous materials from 200-liter containers, e.g. adhesives and sealants or lubricants. Depending on the specific pump configuration, different transfer rates, gear ratios and material ranges are possible. The tandem version enables the use of two material containers within a correspondingly designed transfer system.

Condition: used, Year of construction: 1996, 1 unit - Model: F 80-210/014 UG-158, 1.3 kW, 1,400 rpm, Capacity: 0.3-14 L/s, delivery head: 4.4 – 0.9 m, year of manufacture: 1995 Hjdpfx Aozr H Rqobisfk 1 unit - Model: F 100-210/024 YG-190, 2.4 kW, 1,450 rpm, Capacity: 0.3-35 L/s, delivery head: 8.5 – 1.5 m, year of manufacture: 1996

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: DEM120281014, overall weight: 80 kg, total length: 1,000 mm, total width: 400 mm, total height: 1,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, Schmalz VAGG 40 AC3 80 Vacuum Pump – 80 l tank, mobile, automatic ✅ Mobile on 4 wheels (easy integration) ✅ 80 l vacuum reservoir (stable pressure maintenance) ✅ Automatic control (-0.7 to -0.8 bar) ✅ Warning signal in case of underpressure/power failure Hfjdozqvpyepfx Abiek ✅ Very good condition, few signs of use Ideal for CNC clamping technology, as well as for clamping and moving panels in carpentry or metal construction. Accessories for panel clamping are also available used upon request. The vacuum pump can be inspected and tested in Leinfelden-Echterdingen.

Condition: as good as new (ex-display), Pump, Industrial Circulation Pump, WILO Close-Coupled Centrifugal Pump, 45 m³/h, 12.5 m, Used Machine Manufacturer Wilo-Werk Model IPH 80/200-3/4 Article Number 0912298 / 8610-1 Technical Specifications Maximum Liquid Temperature (t): 120°C / 140°C Maximum Operating Pressure (p): 16 / 13 bar Flow Rate (Q): 45 m³/h Head (H): 12.5 m Rated Speed (n): 1450 RPM Operating Voltage: 380 V Current Consumption: 7 A Actual Speed: 1410 RPM Overall Dimensions Width: 500 mm Depth: 350 mm Height: 560 mm Description Industrial WILO close-coupled centrifugal circulation pump designed for the circulation of hot water and other non-aggressive liquids in heating, cooling, and industrial process systems. Hfodpfx Ajzqbtqobiek The pump provides a flow rate of 45 m³/h and a head of 12.5 m, making it suitable for HVAC systems, district heating networks, industrial cooling circuits, and process water applications. Designed for continuous-duty operation, the pump can handle liquid temperatures of up to 140°C and operating pressures of up to 16 bar, ensuring reliable and efficient performance in demanding industrial environments.

Condition: used, Pump, Wilo IL80/190-18.5/2; 18.5 kW; Used machine Manufacturer: Wilo Type: IL80/190-18.5/2 Overall dimensions: Width: 510 mm Depth: 350 mm Height: 960 mm Hfodszqbl Hjpfx Abisk Weight: 100 kg Electrical data: 400V; 31.4A; 18.5 kW Flow rate capacity: up to approx. 2,499 l/min (≈150 m³/h). Maximum delivery head: approx. 48.5 m. Fluid temperature range: −20 °C to +140 °C.

Condition: used, Year of construction: 1999, operating hours: 105,000 h, functionality: fully functional, overall weight: 741 kg, total length: 1,940 mm, total width: 870 mm, total height: 1,300 mm, volume flow: 425 m³/h, operating pressure: 1 bar, final pressure: 1 bar, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 970 rpm, protection type (IP code): IP55, KSB KWP K 200-320 Pump Set, 18.5 kW – Complete Set, Documented 8 × KSB Centrifugal Pump KWP K 200-320 – Complete Industrial Unit, incl. Drive For sale are 8 identical, well-maintained industrial pump units from the renowned KSB KWP K 200-320 series. The units originate from a special order (KSB Pegnitz, order from 1999/2000) and were accepted and tested according to DIN 1944/III with customer acceptance. Sale of used KSB pump units (year of manufacture 1999, relatively low operating time of approx. 105,000 hours per unit) in as-is condition, without warranty or guarantee. Units have been dismantled; functional tests are possible upon request (without assurance of characteristics). Reference operation with identical units available. Sale preferably in packages; further units potentially available in the future (11 additional units). Spare parts and service obligations are excluded! Pump – KSB KWP K 200-320 Manufacturer KSB Aktiengesellschaft, Pegnitz Type / Series KWP K 200-320 (Impeller pump, radially split volute casing pump) Works No. 5-N01-541905 (Serial numbers on request) Flow rate Q 425 m³/h (118 l/s) Head H 10.25 m Min. Flow Rate 89.9 m³/h Speed 970 rpm (constant) Pump power 14.7 kW Motor power 18.5 kW Efficiency 80.8% NPSH 2.20 m Operating pressure max. 10 bar Suction nozzle DN 200, axial Hodezp U Tuspfx Abisfk Discharge nozzle DN 200, upwards Flange DIN 2532 PN 10 Impeller diameter 320 mm (Re-machining form A15, 3-blade) Bearing carrier P05AX Shaft seal Tandem-GLRD (non-pressurized quench), Type 4K M3 Materials Pump casing / Pressure cover / Impeller 9.4460 (stainless, abrasion-resistant) Shaft sleeve 1.4539 GLRD cover 1.4571 Shaft C 45 N Base plate GG (gray cast iron) Drive & Peripherals per Unit Electric motor VEM, IP55, IEC size 200L, 18.5 kW, 970 rpm, B3, 50 Hz, 400/690 V, Insulation F, 3 PT100 sensors Coupling Flender Eupex N-H / Size 140, Intermediate sleeve 180 mm Base plate ZN 24259-G-ISO, Size 9G, GG, 4×M24×320 stud bolts Quench tank incl. piping 1.4571, without fittings Coupling guard Steel Weights per Unit Pump 350 kg Motor 175 kg Base plate 200 kg Coupling + guard 16 kg Total 741 kg Available Documentation (per unit) • Acceptance / Test report of the initial commissioning EN 10204 / DIN 1944 Class III (5 measuring points) • Q-H curves (Curve No. K 95231) • Installation plan / Dimension table with nozzle connections • Installation drawing of the mechanical seal (Drawing No. 0W244223) • Piping plan quench tank • Operating and maintenance instructions Application area / Application notes The KWP K series is a proven process centrifugal pump for: • Wastewater treatment and sewage treatment plant process technology • Biogas plants and fermentation substrate conveying • Sugar factories, paper mills, food production • Biotechnological processes (algae suspensions, fermentation) • Cooling water circuits and process water conveying in the chemical industry Further important (sales) information can be found in the attached documents.

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Hodpfx Ajzn N T Tebisfk Protection class: IP54 Insulation class: F

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Hfodpfozn N Auex Abisk Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: used, functionality: unexamined, -KOM 3181- Two used Graco Inc. bellow pumps are offered for sale here. The pumps have the component designation G05B15 A22A. Max. oil temperature: 71 degrees Celsius Max. flow rate: 9 l/min Max. pressure: 6.9 bar Weight: 42.8 kg (per pump) Hfodpfxszltm Sj Abijk

Condition: excellent (used), I am offering for sale a professional fire-fighting pump, a PFJ GmbH Jöhstadt TS 8/8 model, manufactured in Germany according to DIN 14410. This unit is designed for use by fire departments, rescue units, and for applications involving pumping large volumes of water. The pump is equipped with a powerful gasoline engine, a control panel with electric start, pressure gauges, and a complete set of fire hose connections. The unit is in very good condition – it was used sparingly and shows only minor signs of storage. Technical specifications: Manufacturer: PFJ GmbH Jöhstadt Model: TS 8/8 DIN 14410 Year of manufacture: 1994 Hfodpfx Abszlknyoisk Pump type: FP 8/8 DIN 14420 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Rotational speed: 2725 rpm Gear ratio: 1.9 : 1 Weight: 147 kg Fuel: lead-free gasoline Country of manufacture: Germany Advantages: Very low operating hours – approx. 9.4 operating hours Robust German construction Electric start and manual starter Complete set of indicators and pressure gauges Ready for use Ideal for volunteer fire departments, professional fire departments, collectors, and companies involved in water management.

Condition: good (used), Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Manufacturer: Bieri, hydraulic reservoir, hydraulic tank for hydraulic power unit -Hydraulic tank: with filter and level indicator -Individual components: see photos -Dimensions: 340/245/H300 mm -Weight: 6.1 kg Hodozk Etuopfx Abijfk

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Year of manufacture: 2018 Hfodpfx Aezka U Hobiek Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Frequency: 50 Hz Rated speed (n fix): 2950 rpm Technical specifications: Flow rate / Head (Q/H): 38.7 m³/h / 84 m Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: used, Used hydraulic pump system with 4 pumps and an approximately 200-liter reservoir, including a collection basin. Hedpfx Abjzi Sn Ajiefk

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, Hfjdjzi Hc Ijpfx Abijk detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: new, Methanol Loading Pump Type: KRH-150/280-308/CN 3 units Hfsdpfxezh Ik Do Abijk Centerline-mounted, single-stage overhung pump according to API610, 11th edition, type OH2 Methanol Slop Pump Type: KCV-32/160-308/CN-2700 1 unit Vertically suspended, single-casing, volute, line-shaft-driven sump pump according to API610, 11th edition, type VSA

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Rietschle, rotary vane vacuum pump type KTA 80/1 (08) TN -Suction capacity: 80 m³/h -Pressure: 0.71 / -0.6 bar Hsdpfx Abszhkfwsijfk -Drive: CSM 4 kW / 1420 rpm -Dimensions: 840/420/H310 mm -Weight: 101 kg

Condition: used, STERLING SIHI Industrial Centrifugal Pump with LEROY-SOMER Explosion-Proof (ATEX) Electric Motor (4.0 kW), Used Machine Overall Dimensions Width: 600 mm Depth: 300 mm Height: 360 mm Electric Motor Manufacturer: Moteurs Leroy-Somer (Angoulême, France) Model: 3~ FLSD112M Serial Number: 612051 RG001 Power Output: 4.0 kW Rated Speed: Approx. 2915–2920 RPM Hfodozg Uu Tjpfx Abisk Explosion Protection (ATEX): II 2 G EEx d IIB T4 Protection Rating: IP55 Mechanical Protection: IK08 Pump Manufacturer: Sterling Fluid Systems / Sterling SIHI Model: ZLKD 032200 A4 BHJ 4B 4 112 ATEX Classification: II 2G c T1–T5

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg Hsdpfszg Dmxjx Abiofk

Condition: used, Available quantity: 3 units Hodpfjzggy Iex Abiofk “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: PIAB Type: piCOMPACT 23 SMART – PC.F.422.S.AAA.F1P1.2X.P1.EN.ACAB Technology: Compact/stackable COAX® vacuum ejector with smart functionality (control, blow-off valve, energy-saving mode)

Condition: as good as new (ex-display), Pump, Regenerative Turbine Pump, Speck Magnetic Coupling Regenerative Pump 3 m³/h, Used Machine Overall Dimensions Width: 380 mm Depth: 170 mm Height: 140 mm Hfsdpfx Abjzf D Aksijk Manufacturer Speck Pumpen (Roth, Germany) Technical Specifications Model: CY-4281-MK.0742 ID Number: 38799 Serial Number: 1002127031 Date of Manufacture: 11/2020 Maximum Medium Temperature: Water: max. 160 °C Oil: max. 200 °C Maximum Head (Hmax): 70 m Maximum Flow Rate (Qmax): 50 l/min (3 m³/h) Frequency: 50 Hz