Stiboller Versteigerungen

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 17123, working width: 8,200 mm, bending angle (max.): 142 °, sheet thickness steel (max.): 2 mm, Equipment: CE marking, documentation/manual, emergency stop, We are currently selling a Thalmann AG single folding machine (TZ) with 2 mm bending capacity and 8 m working length. The machine is fully operational and is only being sold due to the purchase of a new EVOBEND double folding machine. The machine can be inspected under power by appointment. Below are the details of the machine: THALMANN – Long Folding Machine Model TZ 200 – 8.2 m / DS 3001 S-Line Series AB – SE8 - 200 – S8 - EVHY / 2.00 mm steel sheet (400 N/mm2): Technical Information for Model TZ 200 – 8.2 m S8 – Prof. Line: Working length / Insertion depth: 8200 mm / 1250 mm Max. Upper beam opening: 200 mm Max. bending capacity: S = 20mm 2.0 mm steel sheet (400 N/mm2) Bending beam width: 10 mm + 10 mm (17 mm) Bending angle / Accuracy: Max. 142° / +/- 0.5° Bending speed: 0° - 140° in 1.8 s and 140° - 0° in 1.7 s Backgauge travel: 5 mm - 1250 mm (7 gauge units) Electrical connection / Fuse: 400 V / 50 Hz / 5.5 kW pump motor / 40A Dimensions / Weight: L9500 x W2110 x H1800 mm / approx. 8700 kg Includes the following additional equipment: - Electric longitudinal cutting unit: 2.0 mm steel sheet, 1 pc. - Automatic tapered backgauge, 1 pc. - HARDOX hardened clamping and support rail, 1 set - Curved clamping bar (instead of straight), 1 pc. - Gauge for short bending parts, 1 pc. - Offset bending beam – PLUS clearance form, 1 pc. Gbsdpfeyigtrjx Af Doh - Automatic dynamic crowning, 1 pc. - High-speed hydraulics with STOP&GO function, 1 pc. - M-Guard remote maintenance support, 1 pc. - LED bending line lighting (RGB multicolor), 1 pc.

Condition: good (used), Technical Specifications: Gbsdeyiaucspfx Af Djh Working length: 6040 mm Bending capacity (steel): 2.0 mm NC control Bending angle adjustment: 0 – 180° Upper beam opening: 500 mm Dimensions (L x W x H): approx. 8300 x 1350 x 2000 mm Weight: approx. 11 t Accessories: various segmented tools rear outfeed table The seller assumes no liability for typing or data transmission errors. The machine is in a condition commensurate with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 1976, Max. bending capacity steel: 1,0mm Max. bedning capacity aluminum: 1,5mm Incl. manual cutter and standard control For sale on behalf of a customer. Gedpfxeyhnt Tj Af Debh

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 06393, sheet thickness (max.): 2 mm, We offer this used Thalmann THAKO 15-6.2 M folding machine, year of manufacture 2001. Machine type: THAKO 15-6.2 M Serial number: 06393 Year of manufacture: 2001 Gbjdpjygtycjfx Af Dsh If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Used 4-meter folding machine from RAS Model: 74.40 Gbedpfx Afsyfmy Hs Djh Capacity: 4000 x 3 mm Multibend 2000 CNC control Year of manufacture: 1992 The machine is in good working condition.

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 401/453, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Biegemaster, working width: 6,200 mm, overall weight: 3,800 kg, total length: 7,400 mm, total width: 1,800 mm, total height: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2025, Equipment: angle stop, emergency stop, foot remote control, We offer this used BIEGEMASTER BM 6.1,50 folding machine with CNC-controlled backgauge, year of manufacture 2014. The machine is equipped with an automatic cutting system. It has been serviced annually and maintained by Biegemaster. The machine will be available from the end of April. If you have any questions or need more information, please send us a message or give us a call. Gbodoyc Uq Uepfx Af Doh

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 125 h, machine/vehicle number: 9842150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 6,400 mm, type of crowning: CNC-controlled, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, overall weight: 5,800 kg, total length: 7,220 mm, total width: 2,080 mm, total height: 1,800 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, angle stop, cone bending device, documentation/manual, emergency stop, foot remote control, A nearly new CNC folding machine from Variobend, the leading German manufacturer in this segment. Ke Dbgeyah H Def Ruewt Gsdpjyctxkofx Af Debh The machine has been used only minimally and has just undergone full scheduled service. Perfect technical condition – ready for immediate operation. The machine is fully guaranteed, and official Variobend service support is always available. We are happy to personally demonstrate all machine functions on-site. After purchase, we will also provide full explanation, operator training, and hands-on instruction for you or your staff to ensure smooth and safe operation of this exceptional machine. Transport, as well as loading and unloading of the machine, can be arranged upon agreement.

Condition: new, Year of construction: 2026, Hydraulic bending machines HKS-CNC Profi are equipped with automatic scissors and a movable mass for moving sheet metal. CNC software enables the graphic design of profiles of various forms and sizes. A 21,5-inch industrial LCD touch-screen makes the programming even more manageable. Working length: 6.100 mm Machine length: 7.200 mm Sheet metal thickness: 1,5mm (Al), 1,25 mm (Stahl) Stand number: 6 Machine weight: 3.600 kg Gbjdjx Uqqcopfx Af Doh Delivery time: in stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 919, control type: CNC control, degree of automation: automatic, working width: 4,000 mm, bending angle (max.): 145 °, overall weight: 2,500 kg, warranty duration: 6 months, year of last overhaul: 2025, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, We offer this very well-maintained SAS Strojegradnja HKS-CNC 4m Profi folding machine, year of manufacture 2025. Manufacturer: SAS Strojegradnja Model: HKS-CNC 4m Profi Year of manufacture: 2025 Working length: 4.0 m Maximum sheet thickness: 1.5 mm If you have any questions or need further information, please feel free to send a message. Gedpfxox Iq U Uo Af Dobh

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Gbjdsx Ilx Iopfx Af Deh Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: good (used), Technical data: Working length: 6050 mm Bending capacity: 2.0 mm NC control Sheet metal cutting device: rotary shear Upper beam opening: 250 mm Motor power: 9 kW Dimensions (Length x Width x Height): approx. 7200 x 1800 x 1750 mm Weight: approx. 5 t Gbsdoxyau Eepfx Af Doh The seller is not liable for typographical or data transmission errors. The machine is in condition commensurate with its age regarding appearance, technology, and wear; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, working width: 6,100 mm, total length: 6,750 mm, total width: 1,550 mm, total height: 1,820 mm, input voltage: 400 V, - Hub cylinder seals have been gradually replaced over the last 6 years Gsdpfxsxv Akbj Af Djbh - Oil change carried out 2 years ago - Machine was inspected by a specialist - Two adjustable angle presets - Electric cutting device - Cable for the cutting device was renewed 3 years ago

Condition: refurbished (used), functionality: fully functional, Year of construction: 1989, Used Biegemaster long-folder model BMTH 6.1,25 Year 1988 Technical details: Working length: 6000 mm Bending capacity steel 400 N/mm²: 1,25 mm Bending capacity aluminum 190 N/mm²: 1,50 mm Stands and Arms: 5 pcs. Incl. Electric cutter Incl. Standard control Gbedoxpgagjpfx Af Deh

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 05053-00/K22170, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 6,400 mm, Working length: 6400 mm Working thickness: 1.5 mm (400 N/mm²) Without shear Back gauges Taper stop Gsdpfexm Sbdjx Af Djbh New controller (2022)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Easybend 2DT, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Haco press brake type PPES 4m x 135T Easybend 2DT CNC control Motorized backgauge X-axis 2 pneumatic fingers Gbedpfx Afsxbnz As Djh Manual quick-release clamping system for punch, European Standard type Table for die, European Standard type

Condition: reconditioned (used), functionality: fully functional, control type: CNC control, controller model: Easybend 2DT, working width: 4,300 mm, bending force (max.): 200 t, Refurbished machine Haco press brake type ERMS 4.3m x 200T Motorized backgauge axis X, stroke 1000mm Manual quick-clamping system for punches, European Standard Monoblock die table Gjdpfx Ajxbnx Ief Dsbh

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, controller model: ATL 550, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Haco press brake type PPM 4m x 135T ATL 550 control Motorized back gauge X-axis Manual crowning table Monobloc punch Monobloc die Godpfx Afoxanlfo Debh

Condition: used, total length: 7,300 mm, total width: 1,800 mm, total height: 1,550 mm, Empty weight: 6.000 kg Price: On request Max. working width: 6050mm Max. thickness: 1.5mm Max. opening: 250mm Max. angle: 180gr Number of adjustable angle-sequences: 8 With cutting device on back-side Gbsdjw Evdiopfx Af Dsh - Documentation available: No - CE certificate present: No - Serial number: 425 - Drive system: Conventional - Power [kW]: 4.5 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6050 - Max. opening [mm]: 250 - Max. bending angle [°]: 180 - Transport dimensions: 7300mm x 1800mm x 1550mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: limited functionality, Year of construction: 1985, degree of automation: semi-automatic, actuation type: electric, working width: 6,000 mm, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness aluminum (max.): 1 mm, total width: 7,000 mm, total height: 1,600 mm, input voltage: 400 V, Being sold due to upgrade to a new machine! Bending machine / Press brake by Jorns Bending length: 6 m Gedpfswxahrex Af Debh Used, no returns and no warranty. Net price: €16,500.00 Subject to errors and omissions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Gedpfxownyu Ds Af Dobh Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, working width: 2,080 mm, bending angle (max.): 145 °, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 9,000 kg, total length: 9,500 mm, total height: 2,100 mm, working length: 8,020 mm,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1970, working width: 6,040 mm, sheet thickness (max.): 2 mm, TECHNICAL DETAILS Sheet width: 6,040 mm Sheet thickness: 2 mm Electrical system Total power requirement: 10 kW Gedpfx Ajwmmbzjf Debh Dimensions and weight Machine weight approx.: 7,000 kg

Condition: used, Year of construction: 2006, Brake force 300 tons Working length 6100 mm Distance between uprights 4550 mm Throat depth 400 mm Punch stroke 320 mm Table width 220 mm Fast speed (0 – 100) mm/sec Woriking speed (0 - 7) mm/sec Upstroke speed (0 – 90) mm/sec Hydraulic pressure (max) 255 bar Main electric motor 18,5 KW Length 7500 mm Width 2900 mm Godpfx Ajwhcycsf Debh Height 3700 mm Weight (aproxim.) 32000 Κgr

Condition: like new (used), Year of construction: 1990, FEATURES Working length: 6 m Working thickness: 1.5 m Electric shear 6-fold program Gsdpfx Afsv Ipgqs Djbh Manual stop stops Price on request

Condition: excellent (used), Technical data: Working length: 4050 mm Bending capacity: 2.0 mm Sheet metal cutting device Max. opening of bending beam: 300 mm Gbjdev Ef Apopfx Af Doh Motor power: 4.5 kW Dimensions (length x width x height): approx. 5200 x 1500 x 1650 mm Weight: approx. 3.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.