Romania

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,055 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Ready for use and fully functional Fpsdozt Dtlspfx Ahask Technical condition: good Battery voltage: 24V Battery Ah: 500Ah Battery manufacturer: Allgäu Batterie Battery type: PzS Battery year of manufacture: 2024 Battery condition: 60 - 80% Description: Delivery includes a new FEM 4.004 inspection, including inspection report. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other forklifts in stock. Please feel free to browse our website at fleischmann-foerdertechnik.com. We would be happy to provide you with a quote for leasing and financing, as well as delivery under favorable conditions. We also offer trade-in options for Linde equipment – even if you do not purchase a device from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes, and errors.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,546 h, load capacity: 1,400 kg, lifting height: 5,555 mm, free lift: 1,745 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Technical condition: Good Front tire type: Vulkollan Rear tire type: Vulkollan Fsdpozt Dtfofx Ahaspk Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Midac Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection. If you have further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. Leasing & financing as well as delivery on favorable terms can be arranged for you. Trade-in of Linde equipment is also possible – even if you do not purchase a device from us. Stated operating hours were recorded at the time of posting. Subject to prior sale, alterations, and errors. Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,423 h, load capacity: 1,400 kg, lifting height: 4,805 mm, free lift: 1,560 mm, fuel type: electric, mast type: triplex, construction height: 2,170 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Technical condition: good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: AIM Battery type: PzS Fpsdpfx Ajzt Dr Uohaok Battery year: 2018 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection book. If you have any further questions, please call us. In addition to this model, we have about 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik Leasing & Financing as well as a delivery at favorable conditions, we are happy to inquire for you. A trade-in of Linde devices is also possible – even if you do not purchase a device from us. The stated operating hours were read as of the date of listing. Subject to prior sale, changes and errors. Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 2,200 h, load capacity: 1,200 kg, lifting height: 3,350 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,140 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Load centre of gravity: 600 Mast type: Standard Fsdpfozt Dr Isx Ahajpk Condition: Reconditioned without guarantee Technical condition: good Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery Ah: 200Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 test If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We are happy to enquire about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde devices - even without purchasing a device from us. The operating hours shown were read off as of the date of entry. Subject to prior sale, changes and errors. Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 952 h, load capacity: 1,200 kg, lifting height: 2,924 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Load centre of gravity: 600 Mast type: Standard Fjdpfx Ahjzt Drzeaepk Condition: Ready for use and fully functional Technical condition: good Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery Ah: 200Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 test If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We are happy to enquire about leasing & financing as well as delivery at favorable conditions. Linde devices can also be traded in - even without purchasing a device from us. The operating hours shown were read off as of the date of entry. Subject to prior sale, changes and errors. Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,441 h, load capacity: 3,500 kg, lifting height: 5,130 mm, free lift: 1,544 mm, fuel type: electric, mast type: triplex, construction height: 2,324 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Dual pedal Condition: Like new Technical condition: good Front tire type: Superelastic Front tire size: 315-45-12 NEW Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 200-50-10 NEW Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 775Ah Battery manufacturer: AIM Fpsdpfezt Drujx Ahask Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: Handover with new FEM 4.004 inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options, and we will be happy to provide you with a quote for delivery at favorable terms. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes, and errors. Side shifter, fork positioner Durwen fork positioner with separate side thrust, 5th valve free with solenoid valve 3rd valve, 4th valve, rear work light, front work light, heater, solenoid valve, full cabin, full free lift, safety light, seat heating 4x LED work lights, roof protection grille, blue spot front and rear, flashing beacon, comfort seat fabric/seat heating.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 1,500 kg, empty load weight: 353 kg, Fork positioner Load center: 600 Condition: Ready for use and fully functional Technical condition: very good Fpodjzt Drnepfx Ahaok Description: German SH fork positioner P1-ZVB 15 No.: R0813 Year of manufacture: 2014 Manufacturer: SH Anbaugeräte Type: P1-ZVB 15 Serial/part number: 2013-600385 Load capacity: 1,500 kg Load center: 600 mm Center of gravity: 270 mm Load center distance: 200 mm Weight: 353 kg Design: hydraulic fork positioner Condition: ready for use and fully functional Visual condition: very good Technical condition: very good The hydraulic fork positioner allows for convenient adjustment of the fork spacing directly from the driver's seat. The attachment is in very good used condition and is ready for operation. Before use, the compatibility with the respective forklift must be checked, in particular with regard to mounting, load capacity, and hydraulic connections. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of the condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site. English SH Fork Positioner P1-ZVB 15 No.: R0813 Year of manufacture: 2014 Manufacturer: SH Anbaugeräte Type: P1-ZVB 15 Serial / part number: 2013-600385 Capacity: 1,500 kg Load centre: 600 mm Centre of gravity: 270 mm Lost load centre: 200 mm Weight: 353 kg Design: Hydraulic fork positioner Condition: ready for use and fully functional Visual condition: very good Technical condition: very good The hydraulic fork positioner allows the fork spacing to be conveniently adjusted directly from the driver's position. The attachment is in very good used condition and ready for operation. Compatibility with the respective forklift, particularly regarding mounting, capacity and hydraulic connections, should be checked before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site.

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 2,900 kg, Clamp fork Condition (Technical): normal Description: German: KAUP clamp fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Load capacity: 2,900 kg Load center: 500 mm Center of gravity: 340 mm Load center distance: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic attachment for forklifts, enabling both the normal lifting of loads via the fork tines and the lateral clamping of suitable goods. The attachment is in used condition, with cosmetic wear commensurate with its age. A thorough technical inspection and a check of compatibility with the respective forklift should be carried out before use. Fast and straightforward transport is possible upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible equipment is provided individually upon request. Subject to errors and prior sale. Sale only to commercial businesses. All sales of used equipment are made without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of other equipment and attachments available on site. English: KAUP Clamp Fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Capacity: 2,900 kg Load centre: 500 mm Centre of gravity: 340 mm Lost load centre: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic forklift attachment and can be used both for conventional handling with the forks and for clamping suitable loads from the sides. The attachment is in used, age-related visual condition. A detailed technical inspection and verification of compatibility with the respective forklift should be carried out before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site. Fjdpfx Ahjzt Drhoaspk

Condition: used, functionality: fully functional, machine/vehicle number: H2X3886E55171, Year of construction: 2014, operating hours: 877 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, drive type: Elektro, Electric four-wheel forklift Chassis number: H2X3886E55171 Mast type: Duplex Technical condition: normal Fpodpfxezt Drbs Ahaek Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery type: PzS Description: German Linde E16P-02 No.: R0808 Year of manufacture: 2014 Operating hours: 877 Drive: Electric Lifting capacity: 1,600 kg Lifting height: not specified Overall height: 2,160 mm Mast: Duplex Chassis number: H2X3886E55171 Battery: PzS, further details not specified Tires: solid rubber front approx. 80–100 %, superelastic rear approx. 60–80 % Equipment: Side shift, third and fourth hydraulic valve, front work lights and interior mirror. Charger: not included Condition / known defect: The lifting function of the forklift is currently not operational. According to our current assessment, the cause is a defect in the valve block. However, we do not guarantee this assessment and cannot rule out that there may be additional causes. All other functions of the machine are currently operational. Due to the defective lifting function, the machine is particularly recommended for repair projects or buyers with appropriate technical experience. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, 3rd valve, 4th valve, front work lights, interior mirror.

Condition: used, Year of construction: 2022, Traction battery Battery voltage: 24V Fsdpfxozt Dq Rs Ahajpk Battery Ah: 225Ah Battery manufacturer: AIM ACCUMULATOREN Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: German AIM Accumulatoren traction battery 24 V / 225 Ah No.: not specified Type: PB 24V / 3 PzB 225 Year of manufacture: 2022 Manufacturer: AIM Accumulatoren Battery type: PzB Voltage: 24 V Capacity: 225 Ah Energy: 5.1 kWh Production date: week 40 / 2022 Tray type: 20015-01 Electrolyte volume: 21 l The battery has been refurbished and subsequently tested. During the test, an operating time of approximately 3 hours and 30 minutes was achieved. Actual operating time may vary depending on the vehicle, load, driving style and operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site. English AIM Accumulatoren Traction Battery 24 V / 225 Ah No.: not specified Type: PB 24V / 3 PzB 225 Year of manufacture: 2022 Manufacturer: AIM Accumulatoren Battery type: PzB Voltage: 24 V Capacity: 225 Ah Energy: 5.1 kWh Production date: week 40 / 2022 Tray type: 20015-01 Electrolyte volume: 21 l The battery has been refurbished and subsequently tested. During the test, an operating time of approximately 3 hours and 30 minutes was achieved. Actual operating time may vary depending on the vehicle, load, driving style and operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site.

Condition: used, Year of construction: 2016, empty load weight: 362 kg, Traction battery Battery voltage: 24V Battery Ah: 460Ah Battery manufacturer: Schrader Fpedpfxjzt Dq Ds Ahaok Battery type: PzS Battery year of manufacture: 2016 Battery condition: 80 - 100% Description: German Linde / Schrader traction battery 24 V / 460 Ah No.: R0810 Type: PB 24V / 4PzS 460 Year of manufacture: 2016 Manufacturer: Schrader Battery type: PzS Voltage: 24 V Capacity: 460 Ah Energy: 8.4 kWh Production date: week 43 / 2016 Serial number: Tray type: 20050-01 Electrolyte volume: 58 l Weight: 362 kg Battery condition: approx. 80–100 % The battery has been refurbished and subsequently tested. During the test, an operating time of approximately 3 hours and 39 minutes was achieved. The actual operating time may vary depending on the vehicle, load, driving style and operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site. English Linde / Schrader Traction Battery 24 V / 460 Ah No.: R0810 Type: PB 24V / 4PzS 460 Year of manufacture: 2016 Manufacturer: Schrader Battery type: PzS Voltage: 24 V Capacity: 460 Ah Energy: 8.4 kWh Production date: week 43 / 2016 Serial number: Tray type: 20050-01 Electrolyte volume: 58 l Weight: 362 kg Battery condition: approx. 80–100% The battery has been refurbished and subsequently tested. During the test, an operating time of approximately 3 hours and 39 minutes was achieved. Actual operating time may vary depending on the vehicle, load, driving style and operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site.

Condition: used, Year of construction: 2023, empty load weight: 883 kg, Traction battery Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: Hoppecke Fpedjzt Dqwepfx Ahaok Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: German Hoppecke traction battery 48 V / 625 Ah No.: R0809 Type: 48V 5HPzS 625 Year of manufacture: 2023 Manufacturer: Hoppecke Battery type: PzS Voltage: 48 V Capacity: 625 Ah Number of cells: 24 Production date: 02.08.2023 Serial number: H005000245440 Tray No.: 11684 Weight: 883 kg Battery condition: approx. 80–100% The battery has been professionally refurbished. According to the available information, the battery achieves an operating time of approximately 5 hours. The actual operating time depends on the vehicle, load and individual operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site. English Hoppecke Traction Battery 48 V / 625 Ah No.: R0809 Type: 48V 5HPzS 625 Year of manufacture: 2023 Manufacturer: Hoppecke Battery type: PzS Voltage: 48 V Capacity: 625 Ah Number of cells: 24 Production date: 02 August 2023 Serial number: H005000245440 Tray No.: 11684 Weight: 883 kg Battery condition: approx. 80–100% The battery has been professionally refurbished. According to the available information, the battery achieves an operating time of approximately 5 hours. The actual operating time depends on the vehicle, load and individual operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site.

Condition: used, Year of construction: 1996, operating hours: 12,437 h, load capacity: 16,000 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: simplex, construction height: 3,620 mm, fork carriage width: 2,500 mm, fork length: 2,380 mm, empty load weight: 22,100 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this 161200. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale at our facility. Side shifter, fork positioner Fodpfezt Dqqox Ahaopk Fork positioner adjustment range: 695 / 2385 mm Heater, full cabin

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,915 h, load capacity: 6,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,880 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Load center: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We are also happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this JDQ60/14/40. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our showroom. Fork positioner, Fjdpfjzt Dqkox Ahaepk Heater, full cabin, Platform height: 1050 mm

Condition: used, mileage: 470,000 km, power: 460 kW (625.43 HP), first registration: 07/2021, empty load weight: 8,330 kg, maximum load weight: 19,000 kg, tire condition: 25 %, axle configuration: 1 axle, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, load capacity: 10,670 kg, Equipment: Bluetooth, air conditioning, cruise control, fridge, onboard computer, retarder, • Retarder • 2 x 598L fuel tank • Fog lights • Bluetooth • Air conditioning • GPS • 2 berths • Refrigerator • Heated and ventilated seat • Cruise control and speed limiter • Spoilers • Webasto heater Fedozt Dp Tepfx Ahajpk • Sunroof

Condition: used, mileage: 82,000 km, power: 410 kW (557.44 HP), first registration: 07/2020, empty load weight: 24,100 kg, maximum load weight: 32,000 kg, tire condition: 50 %, axle configuration: > 3 axles, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: air, load capacity: 7,900 kg, crane manufacturer: HIAB, Equipment: Bluetooth, air conditioning, central locking, crane, cruise control, onboard computer, rear view camera, retarder, • DELAYED DELIVERY • HIAB X-HIPRO 638 E-7 crane • 150X-6 jib • 490 KG at 30.20m • Pallet forks • 4 outriggers • Remote control • 7.42m platform • 750mm aluminum sideboards • Storage compartments Fpodpfx Ahezt Dp Hsaok • LED rear lights • Cone holder • Fog lights • Air conditioning • Differential lock • Cruise control and speed limiter

Condition: used, mileage: 14,395 km, power: 103 kW (140.04 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,640 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: air conditioning, trailer coupling, Color: White, permissible total weight: 3500 kg, seats: synthetic leather, 2 x airbags, trailer hitch (ball type), electronic stability program (ESP), Climatic air conditioning, voice control system, passenger seat bench for 2 people, LED headlights, digital radio reception (DAB+), parking assistance (front and rear), rear-view camera, rain sensor, fog lights, exterior mirrors: electrically adjustable and foldable, heated, tire pressure monitoring system, immobilizer, central locking with remote control, heat-insulating glass, comfort package, light and visibility package, storage package, all-season tires, partition, cargo area floor (wood), spare wheel, sliding door (right), hill-start assist, LED daytime running lights, Light Assist, cornering lights, floor covering (rubber), smoker's package, crosswind assist, light sensor, lashing eyes, traffic sign recognition. This is a non-binding offer. Subject to prior sale, errors and changes. Fedozt Dm Sjpfx Ahaopk

Condition: excellent (used), functionality: fully functional, DESTACO pneumatic clamp Recommended for welding jigs and series production. DESTACO 82M-3E series with integrated 8EA-146-4 position sensor module (open/power/close feedback, 10–30VDC, 150mA). DESTACO 82M-3E030063L8 – stronger, 63mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G 1/4 Quantity: 28 pcs. DESTACO 82M-3E030050L8 – 50mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G ¼ Quantity: 8 pcs. Fsdpezt Dm Eofx Ahajpk

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft - Drive shaft bronze bearings Fpsdpezt Dmfsfx Ahask - 3 locking pins - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 225 mm, spindle bore: 62 mm, turning diameter: 400 mm, turning length: 1,000 mm, total length: 2,100 mm, total width: 1,080 mm, total height: 1,520 mm, overall weight: 1,800 kg, This machine, similar to the WEILER Commodor, is still in working order and can be inspected at the factory in good condition. Attached is a PDF with technical data. Fsdpfxjzt Dl Us Ahajpk

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Fedpfx Aezt Dlujhajpk Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. Fpodpfezt Dlhox Ahaek • Model: Concept 350 – 3200 • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: ready for operation (used), Year of construction: 2016, working width: 200 mm, total width: 1,635 mm, total height: 1,730 mm, overall weight: 3,750 kg, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: Smart Line, spindle motor power: 5,500 W, product length (max.): 3,850 mm, This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details. • Working width: 20–200 mm • Working thickness: 8–120 mm • Feed speed: 6–24 m/min • Working table length: 1700 mm • Pressure beam vertical adjustment: 10 mm • Infeed table adjustment: 10 mm • Spindle configuration: • Number of spindles: 6 • Spindle diameter: 40 mm • Maximum tool diameter: • First bottom spindle: 108–145 mm • Right/left spindles: 108 mm • Top spindle: 140 mm • Bottom finishing spindle: 96 mm • Motor power: • Feed motor: 5.5 kW (7.5 HP) Fpedpfx Ajzt Dk Rohaok • Right spindle motor: 5.5 kW (7.5 HP) • Left spindle motor: 5.5 kW (7.5 HP) • Top spindle motor: 7.5 kW (10 HP) • Bottom spindle motor: 5.5 kW (7.5 HP) • Feed beam lifting motor: 1.1 kW • Total installed power: 28.6 kW Additional equipment • Safety cabin included

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) Fpedpfx Ajzt Dkwohaok • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) • Automatic edging feed: coil or strips

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology Fpedpfozt Dkqjx Ahaok • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is not included in the offer includes the machine ilability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior ilable for collection from the beginning of September 2026.