Plontec Machine

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. Dwsdpoztc Nfefx Aansa In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: Dwedpfx Ajznz Ezoanea • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Djdpfx Aszmdl Ijanowa A total of four dryers of this model are available.

Condition: refurbished (used), Dry cleaner/ Friction cleaner Dedjzmdk Djpfx Aanowa with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Dwjdpfx Aaezl Uzwonea Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2023, condition: ready for operation (used), A Scheugenpflug material preparation and feeding unit is available. Two-component Scheugenpflug LiquiPrep LP804 20/20 machine, year of manufacture: 2023, tank volume: 50l/20l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, weight: approx. 430kg, operating hours: 0h. The machine is as new and still in its original packaging. Documentation available. An on-site inspection is possible. Dwjdpszkvk Rofx Aanja

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Please contact us to discuss your project or to set up a site visit. Dodpfx Aszh Evdsanowa

Condition: used, Drive . kW Capacity . kg/h material . Dwsdpfx Aajzdu Twonoa 6 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 6 pieces originally for manipulator AMP1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dwodpfezdu Tqjx Aanea If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . Bandages Trelleborg 2 pieces Bandages Vorwerk 2 pieces For AMP 1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Dedpszdu Tkefx Aanowa please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 4 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Dwjdpfezdu Smsx Aanoa Your Markus Hirsch Team

Condition: used, Drive . kW Dwsdpozdu Sgjfx Aansa Capacity . kg/h material . 4 pieces For Manipulator AMP1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. Dedpfx Aajzcdqqenewa EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SINGLE-SCREW EXTRUDER WITH AC MOTOR + INVERTER, AND ELECTRICAL CONTROL PANEL WITH 8 HEATING ZONES. Dwodozcav Aopfx Aansa

Condition: like new (used), Ionization measuring device. Dwjdezbxzuepfx Aanoa

Condition: excellent (used), GRANULATE DEDUSTING We have 5 units available from a company liquidation. Granulate dedusting machines reliably minimize quality risks. The granulate deduster effectively removes fine dust, ensuring a clean and high-quality plastic granulate. This helps you reduce scrap, prevent production disruptions, and maintain consistently high product quality. Djdpfx Aajy N R Nbonswa

Year of construction: 2015, operating hours: 13,275 h, condition: used, functionality: fully functional, rotor diameter: 800 mm, We are offering this used ZENO ZTLL 1600x1800 shredder for hollow bodies, pallets, etc., year of manufacture 2015. This unit is very well suited for processing hollow bodies, PE waste bins, PP + PE crates, PP KLTs, and PO pallets. 1.1 m³ waste bins can be fed and shredded in one piece. The throughput for these fractions is 1,500 kg per hour. Other hard plastics such as ABS, PS, PMMA, and ABS-chromed materials can also be processed very efficiently. For these, the throughput rate is 2,000 kg per hour. Type: ZTLL 1600x1800 Machine number: 15A-6191 Year of manufacture: 2015 Weight: 12,000 kg Main drive power: 90 kW Main motor current: 161 A Main motor voltage: 400/690 V Main motor speed: 1,450 rpm The main motor is equipped with forced ventilation. The motor was replaced with a new one in November 2023. Rotor speed: 80 - 140 rpm The rotor is equipped with 145 cutting crowns, each measuring 40 mm x 40 mm. The original rotor has been replaced. Dwedpfxsy Efgmj Aanja Hydraulic drive power: 5.5/1.1 kW Hydraulic motor current: 11/2.6 A Hydraulic motor voltage: 400/690 V Hydraulic motor speed: 1,500 rpm The unit is ready for immediate operation after installation. The floor of the unit is uneven. The unit is stored in 34431 Marsberg-Westheim, near the A44. We replaced the unit to further increase the throughput capacity of our facility. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Dwedpfoyx U N Djx Aanja Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Year of construction: 2006, condition: used, functionality: fully functional, TECNOVA 105 RECYCLING LINE with WASHING LINE Re-pelletizing line for plastic recycling with washing line Production 350 kg/h 2 washing tanks in stainless steel Fosha 500 grinder Buffer silo Screw diameter 105 mm Dwjdpfsyx D Hfex Aanja Forced feeder Double piston filter Degassing unit Hot die face pelletizing system Centrifuge and vibrating screen

Year of construction: 2016, condition: used, We are selling three metal separators from Sesotec. Our GF metal detectors for pneumatic applications offer optimal protection against production downtime, interruptions, and customer complaints. Dedpfoyrl Nyex Aanjwa Suitable for steel, copper, non-ferrous metals, and stainless steel. The PRICE is per unit: €1750.

Condition: used, Drive . kW Capacity . kg/h material . 8 pieces For manipulator A5.1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dodpfx Ajyqvm Teanswa If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2019, condition: used, functionality: fully functional, TECNOVA 130 RECYCLING LINE Re-pelletizing line for plastic recycling Materials that can be processed LDPE, LLDPE, HDPE Screw diameter 130 mm Double piston filter Dwodpoyph I Hefx Aansa Feeding silo Single degassing Hot die face pelletizing system Centrifuge and vibrating screen Year 2019

Year of construction: 2016, condition: used, functionality: fully functional, MACCHI RECOTRIM ES 472 Re-pelletizing line for inline recycling of edge trims or material Materials that can be processed LDPE, LLDPE, HDPE and MDPE Output max. 50 kg/h Water cooled Pelletizer system on die-head Touch screen controller With PLC Installed power 33 kW Dsdpfx Ajyni I Seanewa Year 2016

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Dwsdpjxcnxdsfx Aanja Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Dwjdew U Swpopfx Aanea Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.