Datel Electronics limited

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 760 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,000 W, number of axes: 3, This 3-axis HAAS VF-10/50HE vertical machining centre was manufactured in 2011. It features a generous X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 760 mm. The machine is equipped with a robust table size of 3000 x 800 mm and a maximum load capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50HE machine we have for sale. Contact us for further details. • Control: Haas, 15" LCD display Hnodpfxjy Duhds Aczjk • Max. torque: 460 Nm • Tool changer: 30 stations, SK50 • Tool change time: 4.2 s • Table size: 3000 x 800 mm • Options on machine: • Through-spindle coolant, 20 bar • Spindle oil cooling • Handwheel Additional equipment • Chip conveyor Technical Specification Taper Size SK 50

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -10,4 " display - 200mm raised block for Z-axis Hnjdpfjy Dtlzex Aczok - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 18 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -GSA CNC 400-R rotary table -GSA TSA-320S suport -Hydraulic aggregate 200 bar 2(3 A+B) -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Hsdpfx Acey Dtfnezsnk Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 3,600 mm, table width: 1,950 mm, table length: 850 mm, table load: 2,500 kg, overall weight: 17,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, product length (max.): 4,900 mm, number of axes: 3, This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information. Equipment • 24-position drum type tool magazine • Double-arm tool changer • Rigid tapping • Through-spindle coolant: 20 bar • Spindle temperature stabilization • Spindle air blow system • Air and coolant tool cooling system • Integrated chip conveyor • Chip flushing system • Chip wash guns • Digital axis drives • Box guideways on all axes • Telescopic covers on all axes • Mechanical counterbalance on Z-axis • Oil skimmer • Manual handwheel • Working area lighting • Electrical cabinet with cooling • USB port and Fast Ethernet Technical Specification Taper Size SK 40 Hodoy Dpbrjpfx Aczenk Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis vertical machining center with movable column, equipped with a rotary table (mountable both horizontally and vertically) with a diameter of 550mm. Allows pendulum machining (pallet change type) with dedicated partition. Includes laser presetter, wireless workpiece probe HEIDENHAIN TS 642, belt chip conveyor, high-pressure through-spindle cooling with paper filter, spindle line cooler, and remote electronic handwheel HEIDENHAIN. Hjdpfey Diabjx Aczsnk

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Hjdpfx Aey Dgy Eeczjnk Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Condition: ready for operation (used), Year of construction: 1991, operating hours: 13,063 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3-axis AXA VSC-2M was manufactured in 1991. It features a CNC control type and has an approximate total connected load of 20 kW. With around 13,063 operating hours, this machine represents an opportunity for high-quality machining capabilities. If you are looking to get high-quality machining capabilities, consider the AXA VSC-2M vertical machining centre we have for sale. Contact us for further details. • Voltage: 380 V • Control voltage: 24 V • Frequency: 50 Hz • Total connected load: approx. 20 kW • Control type: CNC • Operating hours: approx. 13,063 h Hnjdpfx Asy Ddtpjczsk

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Hnjdpsy Ddkhsfx Aczok Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear Hnsdpfx Ajy A Tb Hjczek The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D Hodpfey A Tbtjx Aczonk number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: good (used), Year of construction: 2013, functionality: fully functional, We offer for sale a robust CNC milling center EUMACH FBE 4000, suitable for heavy-duty machining and the production of large components. The machine is equipped with a modern Fanuc 31iMB control system and features a powerful spindle with a SK50 taper, ensuring high productivity and machining stability. EUMACH FBE 4000 CNC bed milling machine with Fanuc 31iMB control system in standard configuration, including the following special equipment: Control system dialogue in Czech language Automatic tool changer – 24 positions Z-axis travel – 1500 mm with an extended column Chip conveyor OMP-60 workpiece probe TS-27R tool probe Spindle power 22/26 kW Horizontal spindle speed 5000 rpm Manual swivel head, speed 3500 rpm Through-spindle coolant Tool magazine can be swung away from the table area – positioned left of the column The spindle accepts SK50 tooling. Hodjy A Swyjpfx Aczonk

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 2,240 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 900 mm, We offer for sale a high-quality German-made AXA VSC 1-M CNC vertical machining center. This machine is suitable for both single-piece and series production, especially for machining longer workpieces. Its robust construction ensures stability and machining precision. Technical specifications: Manufacturer: AXA Model: VSC 1-M Year of manufacture: 2009 Control system: Heidenhain iTNC 530 Travel paths: X-axis: 2240 mm Y-axis: 600 mm Z-axis: 900 mm Spindle speed: up to 10,000 rpm Taper: SK40 Machine weight: approx. 12,500 kg Equipment: Hsdpfsy A Sanox Aczenk Chip conveyor Tool magazine Enclosed working area

Condition: good (used), Year of construction: 2011, operating hours: 3,400 h, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 760 mm, nominal power (apparent): 22 kVA, torque: 460 Nm, table width: 3,000 mm, table length: 800 mm, table load: 3,000 kg, overall weight: 12,000 kg, HAAS VF10/50 Vertical Machining Center Year of manufacture: 2011 Model: VF10/50, with Haas control, 15'' LCD display Hjdpjy A Na Ssfx Aczonk and the following standard equipment: - Spindle speed: 7,500 rpm - Main motor power: 22 kW - Max. torque: 460 Nm - Number of tool stations: 30 (SK 50) - Tool change time: 4.2 sec - Table size: 3,000 x 800 mm - Max. table load: 1,800 kg Travel (axes): - X: 3,048 mm - Y: 813 mm - Z: 760 mm Optional equipment: - Through-spindle coolant 20 bar - Spindle oil cooling - Chip conveyor - Electronic handwheel

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Hedpfxey Aw Rxs Aczonk Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: ready for operation (used), Year of construction: 1997, operating hours: 8,262 h, travel distance X-axis: 2,240 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, spindle speed (max.): 4,700 rpm, number of slots in tool magazine: 22, number of axes: 3, This 3-axis AXA VSC-1-M/C was manufactured in 1997. It features an X-axis travel of 2240 mm, Y-axis travel of 420 mm, and Z-axis travel of 480 mm. The machine is equipped with a Heidenhain CNC TNC 407 control system and has a tool changer capacity of 22 tools. If you are looking to get high-quality machining capabilities, consider the AXA VSC-1-M/C vertical machining centre we have for sale. Contact us for further details. Power supply: 3x400V / 230V / N / PEFrequency: 50 HzConnected load: 28 kVAControl voltage: 24 VMax. fuse protection: 50 AControl system: Heidenhain CNC TNC 407Tool holder: SK40 DIN 69871 ATool changer capacity: 22 toolsX-axis travel: 2240 mm (2 × 700 mm)Y-axis travel: 420 mmZ-axis travel: 480 mmSpindle speed range: 40 – 4700 rpmAxis drives: BoschMain spindle motor: BoschTool changer drive: BoschMagazine drive: BoschLinear guide system: Deutsche StarCentral lubrication system: Vogel Mini MFIHydraulic unit: Hydac Technical Specification Hjdpfx Aey Awg Hsczonk Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, total height: 1,800 mm, total width: 600 mm, table load: 2,000 kg, overall weight: 2,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, product length (max.): 1,300 mm, number of axes: 3, This 3-axis Sure First QM-1836 was manufactured in 2011. It features a table dimension of 1800 x 1200 mm and impressive axes strokes of 1800 x 1300 x 600 mm. The machine has a maximum rotation speed of 15000 rpm and a forward speed of 20000 mm/min. If you are looking to get high-quality machining capabilities, consider the Sure First QM-1836 vertical machining centre we have for sale. Contact us for further details. • Table dimensions (X/Y): 1800 x 1200 mm Hnodoy Amkhepfx Aczjk • Forward speed: 20000 mm/min

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 920 mm, controller manufacturer: HEIDENHAIN, total height: 7,870 mm, total width: 3,650 mm, table load: 9,000 kg, overall weight: 34,000 kg, spindle speed (max.): 3,800 rpm, product length (max.): 3,760 mm, number of axes: 3, This 3-axis HARTFORD HB 3150/S vertical machining centre was manufactured in 2005. It features a generous table size of 3000 x 1500 mm and impressive axes strokes of 3000 x 1500 x 920 mm. The machine has a maximum rotation speed of 3800 rpm and a forward speed of 10000 mm/min. If you are looking to get high-quality machining capabilities, consider the HARTFORD HB 3150/S machine we have for sale. Contact us for further details. • Table dimensions (X/Y): 3000 x 1500 mm Hnjdjy Al S Ropfx Aczok • Forward speed (feed rate): 10000 mm/min • Power requirement: 50 kVA

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC Vertical Machining Center Hedelius Model BC 40 D/20 Year of manufacture 1997 Siemens Sinumerik 840 D 4th axis Table 2 x 1100 x 420 mm Pendulum machining possible Hsdpsy Alrqsfx Aczjnk Table load 500 kg Travel X/Y/Z 1700/400/400 mm SK 40 20-position tool magazine Spindle speeds 30 – 6,000 rpm Rapid traverse on all axes 30 m/min Drive power 20 kW Weight 7 t Price: EUR 9,500 excl. VAT, ex location

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Hedelius C100 with full equipment: internal coolant supply, internal air, external air, external water, 3D probe, laser tool measurement, spindle HSK63 18000 rpm, 40 tool magazine positions, X2500mm Y1000mm Z770mm, enclosure with automatic roof, Heidenhain 530 control, Absolent extraction (maintenance-free) Hnedpfey Ah Hdsx Aczsk

Condition: used, MAZAK Machining Center Model: VTC 300C - II Year of manufacture: 2002 Travel: X 1740 Y 760 Z 660 Table length: 2000 mm Maximum table load: 1400 kg Tool magazine: 30, Spindle taper: CAT 40 Spindle speed: 12,000 rpm Weight: 10,500 kg Options: conveyor, central partition, central coolant system. Hnedpfx Ajyz Tg Hjczek Maintenance history: May 2020: hydraulic unit replacement November 2022: spindle motor replacement (for 35,000 euros) April 2024: Y-axis lead screw and bearing. Machine in very good working condition.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,292 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,500 g, number of axes: 3, This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details. • Pendulum operation area: 2 × 775 × 620 mm • Main spindle torque: 165 Nm (optional 198 Nm) • Tool holder: HSK A63 • Max tool length: 330 mm • Max tool diameter: 80 mm • Tool change time: approx. 3.0 s • Chip-to-chip time: approx. 6.0 s • Table: cast iron machine table with 5 T-slots DIN 650-18 • Coolant system: central coolant through spindle • Coolant tank capacity: 780 liters • Filter grade: 25 µm • Filter capacity: 130 l/min • Pump A: 20 bar / 30 l/min • Pump B: 2.5 bar / 150 l/min • Electrical connection: 3 × 400 V, 50 Hz • Total connected load: 20 kVA Hjdpfxjyz Spts Aczonk • Compressed air requirement: minimum 7 bar • Weight: 10500 kg • Machine enclosure: full enclosure with electric roller door • Positioning system: glass scales on X/Y/Z axes • Drive system: digital AC servo motors with ball screws • Programming: Heidenhain plain text and DIN/ISO Additional equipment • Chip conveyor: scraper belt type, discharge height approx. 1150 mm • Extraction system: MultiAir exhaust filter, 1200 m³/h • 3D probe: Renishaw RMP 60 • Repeatability: ±2 µm • Probe stylus length: 50 mm • Probe ball diameter: 6 mm • Vises (optional)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 36,111 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: LE 430 CA, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details. • Axes travel and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle Hedpfx Aoyzq A Seczonk • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar • Head: Swivel head with 1° indexing increments • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm − 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm; 7 T-slots, 125 mm spacing • Electrical connection: Total connected load 42 kVA

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 20,000 rpm, spindle motor power: 30,000 W, tool weight: 4,000 g, number of axes: 5, This 5-axis PROMAC ZEPHYR VT 2.5 XL was manufactured in 2015. It features an impressive X-axis travel of 2500 mm, Y-axis travel of 2200 mm, and Z-axis travel of 1100 mm. The machine is equipped with a HEIDENHAIN CNC control and has a maximum spindle speed of 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the PROMAC ZEPHYR VT 2.5 XL vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -110° to +110° • C-axis travel: -200° to +200° • Power-on hours: 20,330 • Spindle hours: 9,902 • Table dimensions: 2000 x 1200 mm • T-slots: 18 mm • Rapid feed (X/Y/Z): 40 m/min • Rapid feed (B/C): 10 rpm/min • Spindle type: Electro-spindle Hjdpfx Aeyzpv Dsczjnk • Spindle torque: 80 Nm • Tool interface: HSK-A63 • Tool magazine capacity: 32 positions • Max tool length: 300 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table Hsdsyzgp Uopfx Aczsnk -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 2,600 mm, travel distance Y-axis: 870 mm, travel distance Z-axis: 760 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details. • Table size: 2800 x 970 mm • Spindle taper: BT50, geared head (gearbox) Hnjdjyyl Iyjpfx Aczsk • Internal cooling: yes • Usage: used partly during the day, not continuously Technical Specification Taper Size BT 50