Kareitec GmbH

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Nodpfoz E A Icex Apholg Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention Nsdpfez E A Hxox Aphjlg The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: used, functionality: fully functional, machine/vehicle number: 2213, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/1991, loading space volume: 36 m³, suspension: air, tire size: 385/65/22.5, tire condition: 80 %, color: white, trailer brake: trailer braked, Year of construction: 1991, Equipment: ABS, LAG 3-axle tank semi-trailer, 36,000 liters, 4 compartments, BPW axles, 1st axle liftable, German vehicle. Nledpfx Ajz E A E Ispheg For sale only to commercial businesses and excluding any warranty. We deliver to any German seaport.

Condition: good (used), Year of construction: 2017, operating hours: 49,222 h, DMG MORI / DECKEL MAHO DMU 210 P – Year of manufacture: 2017 Machine type: 5-axis CNC universal / portal machining center Control system: HEIDENHAIN iTNC 530 HSCI 5-axis simultaneous machining: Yes X-axis: 1,800 mm Y-axis: 2,100 mm Nedpfx Ajz E A Ezepholg Z-axis: 1,250 mm B-axis: NC swivel milling head C-axis: 360° NC rotary axis NC rotary table: Ø 1,700 mm Max. table load: 8,000 kg Max. workpiece diameter: approx. 2,500 mm Max. workpiece height: approx. 1,460 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Spindle power: approx. 35 kW Max. torque: approx. 119 Nm Tool magazine: 60 tools Automatic tool changer: Yes Equipment: IKZ – Internal cooling through the spindle KNOLL KSS / coolant system High-pressure coolant supply Workpiece measuring probe Laser tool measurement Tool breakage detection / breakage monitoring Chip conveyor Work area lighting Full enclosure Direct measuring systems 5-sided machining in a single setup Machine weight: approx. 43,000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 13,661 h, functionality: fully functional, MAZAK VORTEX e-1250V/8S Location: Portugal! Available immediately! Machine type: 5-axis vertical machining center Control: MAZATROL SmoothX X-axis: 1,875 mm Y-axis: 1,250 mm Z-axis: 1,345 mm B-axis: 150° swivel range C-axis: 360° 5-axis simultaneous machining: Yes Max. workpiece diameter: Ø 1,500 mm Max. workpiece height: approx. 1,655 mm Max. table load: approx. 4,000 kg Design: Single table / 8S Spindle speed: 10,000 rpm Spindle power: 37 kW Tool holder: BT50 / CAT50 Tool magazine: 42 tools Design: Double column / gantry design NC rotary table: Yes Nljdpfx Apjz E A D Rohjg Swiveling milling head: Yes Direct drive B-/C-axes Large-part machining up to approx. Ø 1,500 mm

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 375 mm Nledpoz E A Dwefx Aphjg Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement.

Condition: good (used), functionality: fully functional, Year of construction: 2017, overall weight: 16,000 kg, maximum load weight: 13,140 kg, empty load weight: 2,860 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, GERMAN DEALER offers: Krone BDF swap body Year of manufacture: 11 / 2017 16,000 kg GVW 2,860 kg unladen Craneable Double mountings Rear doors Telescopic support legs Interior: 7300x2480x2520 mm Labelling is only foil Many swap bodies and carrier trailers in stock! Nodpfx Aoz E A Dqsphelg ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES – SUPPLYING SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, functionality: fully functional, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,480 mm, GERMAN DEALER offers: BDF platform swap body 7.45 m GALVANIZED Low frame External lashing rings Midsection lashing rings (in addition) Total of 28 lashing rings Lashing rail Craneable Loading area: 7300 mm x 2480 mm 16,000 kg gross weight Multiple units available Numerous swap bodies and drawbar trailers in stock! ##### PLEASE CALL, NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO Commercial Vehicles has been delivering since 1983! VIEWING BY APPOINTMENT ONLY! ##### Nljdpfez E A Dkjx Apheg

Condition: used, empty load weight: 1,900 kg, maximum load weight: 14,100 kg, overall weight: 16,000 kg, loading space length: 7,700 mm, loading space width: 2,460 mm, GERMAN DEALER offers: BDF swap body platform 7.82m, galvanized, with lashing rings, craneable, 16,000 kg gross weight, 1,900 kg unladen, 7,700mm x 2,460mm. Multiple units available. Numerous swap bodies and drawbar trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### NATIONWIDE DELIVERY AVAILABLE IN GERMANY! MEPO-Nutzfahrzeuge has been supplying since 1983! VIEWING BY APPOINTMENT ONLY! ##### Nsdpfx Aoz E A Ddspholg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 99500007558, total width: 800 mm, total length: 1,100 mm, total height: 800 mm, input voltage: 230 V, overall weight: 150 kg, table length: 1,100 mm, table width: 800 mm, table height: 800 mm, input frequency: 50 Hz, compressed air connection: 8 bar, The machine is in very good condition and comes from an educational institution. Nljdpfxez E A A To Apheg

Condition: used, empty load weight: 1,900 kg, maximum load weight: 14,100 kg, overall weight: 16,000 kg, total length: 7,700 mm, total width: 2,480 mm, GERMAN DEALER offers: BDF 7.82m platform Galvanized Tie-down points Suitable for crane loading 7700 mm x 2480 mm Multiple units available Many interchangeable bodies and trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! Nedpfoz E A A Hjx Aphjlg MEPO COMMERCIAL VEHICLES HAS BEEN SUPPLYING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, Used truck tarpaulins already disassembled for pickup Nedpjz E A Ayjfx Aphjlg various sizes available in multiple quantities ##### PLEASE CALL - NO EMAILS! ##### PICKUP ONLY, BY APPOINTMENT! #####

Condition: good (used), functionality: fully functional, empty load weight: 2,970 kg, maximum load weight: 15,030 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2019, next inspection (TÜV): 08/2026, suspension: air, tire size: 445/45R19,5, maximum speed: 125 km/h, Equipment: ABS, GERMAN DEALER offers: well-maintained trailers with wide tires available in multiple units 445/45R19.5 Nodpoz E A Atsfx Aphjlg drawbar adjustable in length BPW axles disc brakes long air springs lifting height up to 1420 mm all with valid inspection and registration very good tires year of manufacture 2019 18,000 kg gross vehicle weight 2,970 kg unladen weight many trailers and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, empty load weight: 3,145 kg, maximum load weight: 14,855 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2012, next inspection (TÜV): 02/2027, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer GALVANISED Twin tires 235/75R17.5 Long air springs Lifting height 1360 mm Drum brakes Available in multiple units Many chassis and swap bodies in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING ONLY BY APPOINTMENT! ##### Nsdpfxjz E A Ams Aphjlg

Condition: used, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 11/2026, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer Multiple units in stock GALVANIZED Twin tires 235/75R17.5 Long air suspension bellows Lifting height 1390 mm Drum brakes Net unit price 3,950 EUR Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Nlsdpez E A Agjfx Aphog

Condition: good (used), empty load weight: 2,830 kg, maximum load weight: 15,170 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2021, next inspection (TÜV): 02/2027, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF demountable semi-trailer Twin tires 235/75R17.5 BPW axles Ride height 990 mm Nedpfx Apez E A Aaoholg Drawbar adjustable in length Multiple units available ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! INSPECTIONS ONLY BY APPOINTMENT! #####

Condition: used, empty load weight: 3,155 kg, maximum load weight: 14,845 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2014, next inspection (TÜV): 09/2026, loading space length: 7,820 mm, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: Jumbo tandem trailer Galvanized 235/75R17.5 Twin tires BPW axles Drum brakes Spare wheel 3 storage boxes We have many trailers and interchangeable platforms in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY THROUGHOUT GERMANY IS POSSIBLE! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Nedpfez E Az Njx Aphelg

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### Nodpjz E Az Ajfx Apholg PLEASE CALL – NO EMAILS! #####

Condition: used, maximum speed: 100 km/h, Equalising block for low-bed semi-trailer Dimensions – see photos ##### Nedjz E Azvspfx Apholg PLEASE CALL – NO EMAILS! #####

Condition: good (used), Year of construction: 2021, operating hours: 24,000 h, functionality: fully functional, Machine in very good condition. Regular maintenance has been performed. The machine must remain in operation until December; the earliest possible delivery date is week 02 of January 2027. Additional photographs are available upon request. We do not sell the machine to dealers. MAZAK INTEGREX i-250H S – 1000U Machine type: 5-axis CNC turning/milling center Control: MAZATROL SmoothAi Max. machining diameter: 670 mm Max. machining length: 1,011 mm Njdpfx Apsz E Ay Sjhelg Max. swing diameter: 670 mm Bar capacity: 65 mm X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,077 mm B-axis: -30° to +210° / 240° Main spindle: 5,000 rpm Main spindle chuck: 8" Spindle nose: A2-6 Main spindle power: up to 22 kW Counter spindle: 5,000 rpm Counter spindle chuck: 8" Counter spindle power: up to 18.5 kW Milling spindle: High-speed version Milling spindle speed: 20,000 rpm Milling spindle power: approx. 24 kW Max. torque: approx. 124 Nm Tool interface: HSK-A63 Tool magazine: at least 38 positions 5-axis simultaneous machining: Yes Main and counter spindle: Yes Part transfer: Yes Turning / Milling / Drilling: Yes Spindle cooling / through-spindle coolant: available or configuration-dependent Rapid traverse X: 50 m/min Rapid traverse Y: 40 m/min Rapid traverse Z: 50 m/min Software/Functions: SmoothAi, Smooth CAM Ai, MAZATROL TWINS, virtual machine simulation / digital machining simulation.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Fanuc control, 5 axes, Nsdpfxez E Ayxo Apholg powered tools, tool changer spindle, tool magazine.

Condition: used, 2 units, diesel-powered generator sets, 400 kVA. Nljdoz E Ayrjpfx Aphog

Condition: good (used), Year of construction: 2006, functionality: fully functional, Fanuc control system, 11 axes, powered tools, tool changer spindle, Njdpsz E Ayfofx Aphjlg Iemca tool magazine.

Condition: like new (used), Year of construction: 2023, operating hours: 3,884 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 8,380 mm, In the interest of a major European steelworks group, we are selling this particularly high-quality turning and milling center. Due to a restructuring, this machine will theoretically be available for delivery starting in October 2026. Further photographs and the order confirmation will be provided after review. MAZAK INTEGREX e-800H 8000U Manufacturer: Yamazaki Mazak Model: INTEGREX e-800H 8000U Machine Type: 5-Axis CNC Turning-Milling Center / Multi-Tasking Machine Previous applications mainly involved the machining of long shafts or shafts in general. Max. Workpiece Size: Ø 1,300 × 8,000 mm Working Area Max. Swing Diameter: Ø 1,300 mm Max. Machining Diameter: Ø 1,300 mm Max. Supported Workpiece Weight: 15,000 kg including clamping devices X-Axis: 1,300 mm Y-Axis: 800 mm Z-Axis: 8,380 mm W-Axis / Tailstock: 6,870 mm B-Axis: -30° to +210° = 240° C-Axis: 360° Main Spindle Chuck Range: 24" to 50" Max. Spindle Speed: 700 rpm Spindle Nose: A2-20 Spindle Bore: Ø 275 mm Spindle Bearing Inner Diameter: Ø 355.6 mm C-Axis Resolution: 0.0001° Spindle Motor: 45 kW Milling/B-Axis Spindle Milling Spindle: Single Spindle Turret with automatic tool changer Max. Spindle Speed: 10,000 rpm (current specification) Milling Spindle Motor: 37 kW B-Axis: 240° Tool Holder: ISO / CAT No. 50 Tool Magazine: 40 tools Max. Tool Diameter: Ø 135 mm With free adjacent positions: up to Ø 260 mm Max. Tool Length: 650 mm Max. Tool Weight: 30 kg Tool Change Time Tool to Tool: approx. 1.8 s Feed Rates Rapid Traverse X: 18 m/min Rapid Traverse Y: 18 m/min Rapid Traverse Z: 18 m/min Rapid Traverse B-Axis: 30 rpm Rapid Traverse C-Axis: 12.5 rpm W-Axis: approx. 2–6 m/min Tailstock / Long Shaft Machining Tailstock Taper: Metric Center No. 100 Max. Tailstock Force: 75 kN W-Axis Travel: 6,870 mm 8000U version with two steady rests Optional long boring bar system up to approx. 1,500 mm tool length with 8000U Dimensions and Weight Nsdpfx Apjz E Ax Ijhjlg Footprint approximately: 16,000 × 6,000 mm Machine Height: approx. 4,650 mm Machine Weight: approx. 96,500 kg Coolant Tank: approx. 2,400 liters Electrical Connection: approx. 131.4 kVA Ø 1,300 × 8,000 mm workpiece capacity Up to 15 tons workpiece weight 5-axis simultaneous turning and milling 8,380 mm Z-axis travel 800 mm Y-axis 240° B-axis 700 rpm main spindle 10,000 rpm milling spindle 45 kW turning spindle 37 kW milling spindle 40 tools 2 steady rests Approx. 96.5 tons machine weight

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90L0865829G_00, overall weight: 1,000 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, The CMS Proxima is an automatic horizontal edging machine (dry edging machine) from CMS Glass Technology for processing glass edges. Processing length: The maximum working length per cycle is approximately 2.6 to 2.7 meters (larger panes can be accommodated). Glass thickness: Can process glass from approximately 4 to 19 mm. It can be operated either as a stand-alone unit (with a simple setup table) or in combination with tilting float cutting tables or laminated safety glass (VSG) cutting tables. Nsdpfsz E Axzex Aphslg