Ligna Construct GmbH

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW operating panel, conveyors Gjdpfx Aez N Tfujhdsbu

Condition: good (used), Year of construction: 1995, Max. cutting length: 5200 mm Max. cutting width: 600 mm Max. cutting height: 170 mm Saw motor: 11 kW Drive: hydraulic, via chain Gbodjz H H Dwjpfx Ahdeu Width stop with digital display With laser

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 600 mm, height adjustment type: electric, rotational speed (max.): 2,900 rpm, Equipment: saw blade guard, Cutting length: 6200 mm Cutting width: 1100 mm with electrically adjustable fence Cutting height: 195 mm Motor power: 11 kW Godpfxjz D Ahge Ahdsbu Saw blade speed: 2900 rpm Infinitely variable feed speed adjustment: 1–80 m/min Two laser guides 6-position cutting height adjustment Two pneumatic clamps Year of manufacture: 2010

Condition: good (used), Year of construction: 1987, Max. cutting length: 5.2 m Gsdpez Dnppsfx Ahdobu Max. cutting width: 0.6 m Max. cutting height: 140 mm Ready for immediate use. The blades will be replaced with new ones.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws made in Germany! Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Max. cutting height: 175 mm Saw blade diameter: 450 - 550 mm Gedpfxjz A Tgde Ahdobu Saw feed: Infinitely variable, from 0 - 80 m/min. Compressed air connection: 1/2", 6 bar Required air volume: approx. 3500 m³/h

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws from the market leader, with Swiss quality! Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Max. cutting height: 210 mm Saw blade diameter: 450 - 620 mm Saw feed: Infinitely variable, from 0 - 80 m/min. Gbjdpfx Ajz A S Umehdju Compressed air connection: 1/2”, 6 bar Required air volume: approx. 3500 m³/h

Condition: used, Year of construction: 1977, functionality: fully functional, operating hours: 800 h, type of input current: AC, cutting height (max.): 100 mm, saw blade diameter: 450 mm, total length: 7,000 mm, total width: 1,200 mm, total height: 900 mm, overall weight: 1,600 kg, feed length X-axis: 6,000 mm, Longitudinal circular saw with a maximum cutting length of 3 m Maximum cutting width of 0.5 m Maximum cutting height of 100 mm Motor power: 12 kW Overall length: 5.8 m Overall width: 1.55 m Gsdpfxoz Alqqs Ahdjbu

Condition: good (used), Year of construction: 2009, Edger and panel saw in one machine. Max. cutting length: 6.2 m Max. cutting width: 2.1 m Max. cutting height: 120 mm With alignment laser for the cutting line Gbodpfx Ahez Abpijdou 2 clamping devices, left and right 6 retractable cross-feed chains in the rear table Saw motor: 11 kW

Condition: used, functionality: fully functional, Maba longitudinal circular saw, 4200 mm cutting length, non-tilting. Gbsdpfx Ahjzxbh Rsdsu

Condition: excellent (used), CATALOGUE NUMBER 8026 Gbjdpfszw Dkfox Ahdeu TECHNICAL DATA - max. cutting length 3100 mm - max. cutting height 80 mm - max. cutting width 570 mm - main saw motor power 10 kW - blade diameter 450 mm - work table height 850 mm - work table width 660 mm - dust extraction nozzle diameter 1x160 mm, 1x170 mm - overall dimensions (length/width/height) 5500x2100x1600 mm - weight approximately 2500 kg ADVANTAGES – for trimming boards – used saw, very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8019 TECHNICAL DATA - max. cutting length 3700mm - max. cutting height 1300mm - max. cutting width 700mm - main saw motor power 11kW - clamping beam - saw blade diameter 550mm - work table height 860mm - pneumatic clamping - work table width 135mm - dust extraction nozzle diameter 2x150mm Gbodpfszw Dg Tjx Ahdju - overall dimensions L/W/H 5600x1500x1900mm - weight approx. 3000kg – for trimming boards – pneumatic clamping – hydraulic saw guidance – cutting width hydraulically adjustable – unpainted – used saw, very good condition Net price: 39900 PLN Net price: 9279 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, PAUL KME REWINDER 1 FIXED BLADE 1 MOVABLE BLADE MULTI-BLADE SHAFT 37 KW MOTOR Gbodpfezwwlvsx Ahdju OVERHAULED IN 2007

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm Gbodpjzq Rh Defx Ahdju max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop new strips will be supplied available at the location in working condition

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Gedpfxozqrrqs Ahdobu Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: used, Woodmizer EG100 double-blade edger, in good condition, 520 mm material width, 300 mm edging width, 7.5 kW, 250 mm blade diameter, 50 mm cutting height. Gbodpfx Ajzqq R Sohdou

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Gedpfx Ahszqqn Dsdsbu

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Immediately available Godpfxezl N Tnj Ahdebu Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. Godpfxszkkf Ao Ahdobu • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Gjdpfx Aezcdn Nshdobu Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Torwegge Multi-Blade Saw Cutting width: 240 mm Chain width: 250 mm Cutting height: 100 mm Motor power: 30 kW Gbjdpfx Ahjy Rqckodou Feed steplessly adjustable: 5–25 m/min

Condition: excellent (used), Paul KME 2/1000R Passage/working width: 1000 mm Cutting height: Up to approx. 120–125 mm. Gbedpfx Asyxmlkjhdsu Motor power: 18.5 kW Cutting system: movable saw (saw sleeves), computer controlled Feed: Infinitely variable feed adjustment Hydraulic adjustment of the upper roller height.

Condition: excellent (used), Opportunity in excellent condition from Switzerland liquidation: Irion longitudinal circular saw, 6200 mm, 15 HP, retractable saw blade, electric height adjustment, stepless hydraulic feed via foot pedal. Gbjdpsyw N Rysfx Ahdou

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers Gbsdpfx Aheyudquedsu • Integrated chip removal conveyor belt • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment •

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Gjdpfx Ahjyam Exedsbu Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing Godew Slwkepfx Ahdjbu • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw